lsblk used in waitforblk() works on blk device names
withouth full path (e.g. "nvme0n1"). This results in
a timeout because we pass "/dev/X" as an argument.
waitforfile() is the way to go in this case.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I47a2b76bce6f15e0ffa2070e581bbf16f9647bdd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3694
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This setting may be crucial on some systems in keeping core dump files
in order, that's why we should always make sure it's main value is
restored upon exiting from autotest.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0c81a8c96c2d8f061e95c2614d9c30f4e3cdd5a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3605
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NOT() function is meant to report a success when given test
fails. This negative testing is meant for specific cases, however,
there may be some circumstances where application failed, but not
for the reasons the tests was aiming for, e.g. upon receiving
signals from the kernel, like SIGILL, SIGSEGV, etc.
To make sure the test is aborted in such a scenario, check exit
status of the execution more carefully. If it matches any of the
defined signals make sure to fail the test. By default, all signals
which generate cores are looked up and SIGKILL which may be sent
out by the kernel as well (in case of the oom-killer).
Also, $EXIT_STATUS var is provided to specifically declare which
exit status NOT() should be looking for if process terminates with
a failure (i.e., for any other reason then receiving a signal).
Change-Id: I67b42ef038ef4553aceaf96d4da139858d819f22
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk/nvmecli git index happens to be corrupted and
results in a lot of unrelated failures in the CI.
This patch attempts only to mitigate the issue of
unwanted failures by restoring nvmecli repository
to clean state.
Fixes#1496
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic17bffb0bc5bd3222c9f395fb217d2ffae99ceb3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Due to the firmware response time for REVERT action, currently
we only enable this test with P4510 drives.
Change-Id: I4b02008ec0b7d2caeba20c566b1cf1b69404ae12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using hardcoded path of /tmp/spdk was a bit problematic due to the
way how CI mixes root permissions with non-root's during test
execution. As an example, see:
https://review.spdk.io/gerrit/c/spdk/spdk/+/2560
Instead of using /tmp/spdk as a fallback, always try to create tmp
directory by generating its path via mktemp(). This way, as with
"autobuild: Use mktemp() for spdk workspace (ae730042)", different
permissions shouldn't be an issue anymore.
Lingering tmp directories will be purge at each set_test_storage()
run.
Change-Id: I93bc60c97b68e66606e98fc83463074fc020e372
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3238
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Usual way to call get_nvme_bdfs() is to iterate over resulting bdfs.
When no bdfs are returned, most of the scripts do no not execute tests
at all and assume success.
Instead of adding error checking for each and every script for no bdfs,
this patch makes get_nvme_bdfs() exit with test failure.
This assumes that there will never be a test that expects no devices
to be present.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e41a885c76ce6cc248fb076bc4f4efd4695ff3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Only spdk/nvme-cli fork with spdk-1.6 branch is supported.
Even then this will be deprecated at some point in the future,
in favor of nvme-cuse.
This came up when fixing the tests to actually run.
If unsupported nvme-cli is used, compilation succeeds and tests
fail at the functional test part with non-obvious message :
# ./nvme id-ctrl 0000:84:00.0
0000:84:00.0: No such file or directory
Some of the CI machines need to be updated, but this
check will make it easier to gauge what went wrong.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia19121a6c49b9618b8fea9e13304e27089f13dcf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
NVMe tests compiled the nvme-cli, but turns out that
NVMe-oF did not. This patch moves compilation to
common script. Meanwhile next one will use it in other tests.
Additionally return to the original directories with
pushd & popd.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica60775a9b8e4347bed28d4c9dfae1acab2cae9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tests should always have a reference to $rootdir absolute path.
Before this change, result of this function depended on current
working directory.
Test like test/nvme/spdk_nvme_cli.sh where directory was changed,
would fail.
With this change the path to get_nvme.sh script should always be
correct.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id555188f032e179eedd406463446a85e13234b6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2936
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use 512B block size when running nvme_namespace_revert
routine. Need to use this block size because of
vhost_boot.sh test case.
Fixes#1452
Change-Id: I5f41cf2bf9d63b811849a99de6cba9b7b5a1d97d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If for any reason the cuse tests do not revert state
of NVMe namespaces to the original state, the test
machines would be stuck in until manual intervention.
Assumed default state is single namespace,
encompassing available space formatted as 4k block size.
This patch adds nvme_namespace_revert(), which
searches for NVMe devices that support Namespace Managment
and have some space unallocated.
When such device is found, all existing namespaces are removed
and single one created.
Fix#1435
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc3b04b3f166bf450b884674fa6a482e2fbc4c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2829
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used couple times in cuse test, so move it to common script.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e9f973e7fb53b0024fb320d37632e1e011ba3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2824
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If there are two or more Nvme SSDs in system, $bdf includes many bdfs.
Function get_first_nvme_bdf() have no effect on local phy servers.
nvme_rpc.sh will report error as below.
09:16:06 # /home//spdk/scripts/rpc.py bdev_nvme_attach_controller -b Nvme0 -t PCIe -a 0000:03:00.0 0000:04:00.0
usage: rpc.py [options]
rpc.py: error: unrecognized arguments: 0000:04:00.0
Change-Id: I91be02b874fcc4ee4626c082b16d06e722797744
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There were many cases in the past where discover_bdevs()
is the first app to parse given (invalid) config and silently
fail without even printing the exact error. That's because
the spdk app that's started inside that function has &>/dev/null.
discover_bdevs() is currently used only in nvme perf scripts,
so move it there. It should be probably simplified there,
but the priority for now - and the purpose of this patch - is to
remove it from autotest_common.sh so that no one is tempted to use it.
Change-Id: I1d5840dde9272cdaa1ff282022c6ec29a297df50
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1554
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of blindly dumping tmp files at random places, try to
determine the best place for given file based on the available
storage.
Change-Id: I92a7adf6cd17222510fa76969856a50f74966c0f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1868
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When grepping the log for a particular test script file,
e.g. lvol_test.sh, we get 20 matches from all the grep | sed | awk |
etc... Only the last match is the actual script execution. So
silence the first 19. They're not particularly useful anyway.
Change-Id: I96c64a1c6d79cecd4966d3c1faddbc014ea8b5b1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2102
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Used to determine whether IDXD isto be configured, previous check
did not work on FreeBSD, only Linux.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I70148ee2f0fffc83c2b89d2de6e81193b9357d3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2060
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Module, etc., will follow. Notes:
* IDXD is an Intel silicon feature available in future Intel CPUs.
Initial development is being done on a simulator. Once HW is
available and the code fully tested the experimental label will be
lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
* The current implementation will only work with VFIO.
* DSA has a number of engines that can be grouped based on application
need such as type of memory being served or QoS. Engines are processing
units and are assigned to groups. Work queues are on device structures
that act as front-end groups for queueing descriptors. Full details on
what is configurable & how will come in later doc patches.
* There is a finite number of work queue slots that are divided amongst
the number of desired work queues in some fashion (ie evenly).
* SW (outside of the idxd lib) is required to manage flow control, to not
over-run the work queues.This is provided in the accel plug-in module.
The upper layers use public API to manage this.
* Work queue submissions are done with a 64 byte atomic instruction
* The design here creates a set of descriptor rings per channel that match
the size of the work queues. Then, an spdk_bit_array is used to make sure
we don't overrun a queue. If there are not slots available, the operation
is put on a linked list to be retried later from the poller.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels with see the ring sizes increase. This is done from upper layers
via public API into the lib.
* The sim has 64 total work queue entries (WQE) that get dolled out to the
work queues (WQ) evenly.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This accomplishes a couple of things:
1. Now we don't perform these checks every single time
we source autotest_common.sh (some 140 times)
2. We have some flexibility in changing parameters either
during a test or when trying to do a specific compilation
and calling this function to get the updated parameters.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibbe2dc9113a56f651d41216e8557708824652442
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1784
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function exposes assoc array which consits of fields extracted
out of the parsed jq output.
Change-Id: I189c5c01e6efd60d6f2010df90093920a5d37690
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Remove SPDK_BUILD_PACKAGE flag, since it was not set
on any of the CI jobs. The default value "0" was always used.
Only indicator whether second part of the script executed,
was handled by RUN_NIGHTLY flag.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1c5a660ed86bb520972c630118f8499966bdb6d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This commit combines a couple of small optimizations to
help make the unittest scan-build checks more comprehensive
while not taking extra time to compile examples when we are
doing functional tests that don't require them.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1d3af0026b4be6e799516ef52e9414790eab85e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose of this flag is sketchy at best.
Failing tests should be either fixed or disabled/removed.
Running separate job in hopes of it fixing itself,
might not bring the expected outcome.
Case in point - test case in this patch
was added to this flag over a year ago.
This is last remaining test case under this flag.
So there is no need for it to exist.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8481ac7102245889047dde083b34276d22271a03
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are tests which create a filesystem on a device.
Each one could use a timeout and retries for each mkfs.
Otherwise following error could appear due to not test
related system activities:
'mkfs.xfs: cannot open /dev/sdb1: Device or resource busy'
References #1141
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7307b085ada42200995d8bd2fcfd0469ee60a732
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Run iscsicleanup once before running the tests. This is
to ensure we delete any stale entries or files if they
were not removed properly in previous test runs.
Fixes#1311
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Idb415adddfaa7cbb443377a292fae357c1707e79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Test in event.sh take 5 seconds on CI at this time.
For the tests to run both SPDK_RUN_FUNCTIONAL_TEST
and SPDK_TEST_EVENT had to be enabled.
This served as very minor time saver, so removing
this flag shouldn't affter test times more that the
5 seconds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3eaa587daf28b2efbc3cfdff5ad648b7529e7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Building docs is tested in autobuild_test_suite
when SPDK_TEST_AUTOBUILD is enabled.
SPDK_BUILD_DOC can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic871febdcaba708e2fbe6a55d31ec3ddb101a818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Building "--with-shared" is tested in autobuild_test_suite
when SPDK_TEST_AUTOBUILD is enabled.
SPDK_BUILD_SHARED_OBJECT can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I05b1d04c3e28ce72c0a4a6deb89d0b6d02e2bb67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Without the shebang, the builtin file command assumes autotest_common.sh
is a c file. This is obviously not the case, but it messes up file type
checking when we are confirming that all files are checked against scanbuild.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I45f32b23ef01b07ce9b72caed743e6670b99055e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function is almost 20 lines long and it essentialy
appends two lines two a specified file. We don't need it.
Change-Id: I565de8e54aa71b04f15745456bec7b2b3b8fc178
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests.
Fixes#1235
Change-Id: I82b9935fc88605b636c2096be6c71d4880a567c8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1309
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The hardcoded path is replaced with $CONFIG_FIO_SOURCE_DIR as defined
during the compile time.
Additionally, all checks which determine if fio is available are now
based on $CONFIG_FIO_PLUGIN=y knob instead of the presence of the fio
repo.
Change-Id: Ie469747f3863c9561f53d32e8c3f29778afaaf74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When gathering test completions original grep went over all
files in repository recursively. In some cases it took
way longer than required.
This patch limits searches only to rootdir and test directories.
References #1068
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ice0bba25f2fad62516226a7b045d12b6614bead5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add rpc_cmd() bash command that sends rpc command to an
rpc.py instance permanently running in background.
This makes sending RPC commands even 17 times faster.
We make use of bash coprocesses - a builtin bash feature
that allow starting background processes with stdin and
stdout connected to pipes. rpc.py will block trying to
read stdin, effectively being always "ready" to read
an RPC command.
The background rpc.py is started with a new --server flag
that's described as:
> Start listening on stdin, parse each line as a regular
> rpc.py execution and create a separate connection for each command.
> Each command's output ends with either **STATUS=0 if the
> command succeeded or **STATUS=1 if it failed.
> --server is meant to be used in conjunction with bash
> coproc, where stdin and stdout are named pipes and can be
> used as a faster way to send RPC commands.
As a part of this patch I'm attaching a sample test
that runs the following rpc commands first with the regular
rpc.py, then the new rpc_cmd() function.
```
time {
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
malloc=$($rpc bdev_malloc_create 8 512)
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "1" ]
$rpc bdev_passthru_create -b "$malloc" -p Passthru0
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "2" ]
$rpc bdev_passthru_delete Passthru0
$rpc bdev_malloc_delete $malloc
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
}
```
Regular rpc.py:
```
real 0m1.477s
user 0m1.289s
sys 0m0.139s
```
rpc_cmd():
```
real 0m0.085s
user 0m0.025s
sys 0m0.006s
```
autotest_common.sh will now spawn an rpc.py daemon if
it's not running yet, and it will offer rpc_cmd() function
to quickly send RPC commands. If the command is invalid or
SPDK returns with error, the bash function will return
a non-zero code and may trigger ERR trap just like a regular
rpc.py instance.
Pipes have major advantage over e.g. unix domain sockets - the pipes
will be automatically closed once the owner process exits.
This means we can create a named pipe in autotest_common.sh,
open it, then start rpc.py in background and never worry
about it again - it will be closed automatically once the
test exits. It doesn't even matter if the test is executed
manually in isolation, or as a part of the entire autotest.
(check_so_deps.sh needs to be modified not to wait for *all*
background processes to finish, but just the ones it started)
Change-Id: If0ded961b7fef3af3837b44532300dee8b5b4663
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch decreases the compile time when particular test
category is not executed by tests.
Added skipping the 'examples' dir during verification
of scanbuild scanned files. Only when examples were not
compiled.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I41e7b9d18913fd02e2b6cbe44f933ab2e0371d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add function to print warning with optional message
in case we'd like to skip a test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iacb1031aac0e17ce80327ca826c51fb2b99a6be0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
No need to exclude the autotest_common.sh twice when
creating test list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ice7be31a9d7d284dd411ebfd3854e075b37c0275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
