per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Get full regex match using ".group(0)" method.
Otherwise a non-iterable MatchObject is passed
to get_route_nic_numa() which causes an exception.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ief8b08387e4233d42b5ac32bd4d7394596aabd78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For each generated fio job section "filename=" field try
to figure out what's the most dominant NUMA node in use
and use it for fio "numa_cpu_nodes" and "numa_mem_policy"
settings.
Change-Id: I96fda436dda8d4009dc191bf7c0c836e5b53a1a3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13514
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This use case was missed during the initial refactor introduced via
008f8a8617. CI depends on it so allow to specify the target location
of the fio configuration and allow to skip call to the main perf
wrapper.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ie41f9db40769980047f42475ce74e61c374c364c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14590
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use fio "offset", "offset_increment" and "size" to
split target file into chunks, so that each fio
job clone (specified by "numjobs") gets it's own
part of the disk to work with.
This is especially helpful in case of sequential
workloads run with numjobs > 1 and helps to keep
the workload to being as close to sequential as
possible.
Change-Id: I1ca88ae56136d22cf396f464d78b05eff5c07a2a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is consistent with the use of terms in other parts of SPDK and fits
with the code living under module/
Change-Id: If182f7cf2d160d57443a1b5f24e0065f191b59b2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use collect-bmc-pm to gather power usage stats during fio workloads.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I20d1f3009c8a32c3927ad2cf2f932a8e97d3e7c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This script is a wrapper around ipmitool which attempts to extract
power statistics from the BMC. It's mainly based around DCMI spec
to make sure it's common for most of the platforms that we use
in our CI. If given BMC does not conform to DCMI, there's a fallback
in place which attempts to find proper sensor in the SDR which may
report overall power usage of the underlying system.
By default, current ("NOW") reading is extracted in context of DCMI.
Different intervals may be defined, and when matched with supported
averaging time periods, special version of the command will be used
to extract additional avg, min, max information for given time (e.g.
current, max, min, avg readings from last 1m). For the SDR fallback,
only current reading can be extracted.
When terminated, script dumps all readings + their averaged value
into separate .txt files.
Change-Id: Ifc8c1defe862254864d69de7edf5cce635aff258
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14144
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I96df5f21f04b9196083f91783f8dd9cc4c6920d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13688
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
$fio_extra_conf can either point at an existing file or be an
attached stdin the fio_conf() should read from.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: If902262b0100fb056491928b3f667ab15e6e0024
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12429
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The wrapper glues execution of the perf/vhost tests in as simple form
as possible. The arguments are meant to be passed either via env or
the cmdline in a keyworded argument fashion. All defaults are
embedded inside the configuration which is built by the wrapper
itself.
https://trello.com/c/HSoRtQkO/401-deprecate-vhost-performance-python-helper-script
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Iad94bfdd65cb8871b819351ddae65e647621fb30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure needed drivers are loaded before we start
the test.
Change-Id: I93e16a2266f99e7bfa6fffaede460c6230659872
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13616
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Update PCM binary paths and executable names are these have
changed some time ago.
Update README.md with an explanation about int variables
for "pcm_settings" option.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8270766ff2c429623a29e4c12427a3dd7e45f229
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
If SIGTERM does not work - use SIGKILL and clean up
any remaining socket files.
Change-Id: I1a4f2e49a8a43f3eed19e09e16d4ee3420cd31f7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
"num_jobs" is described as required parameter in README.md
but not included in example configuration file.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1077d027d6c7dbee49afa1df4345b4dd478b5ad6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13615
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Use posix sockets by default when running tests.
For now we only want to test with this socket type
and ssl socket support may be added later if needed.
Change-Id: If8b125518cf1c01a841276b58fa7ca7799aeb229
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to add core_limit parameter to scheduler by RPC.
Signed-off-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Change-Id: I0570d24e9ae67ccde64e5f996706fefd2e403086
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
IDXD has always been used everywhere but technically it stands for
the driver, not the HW (Intel Data Streaming Accelerator Driver)
where the X comes from "Streaming Accelerator" somehow. Anyway, the
underlying hardware is just DSA. It doesn't matter much now but
upcoming patches will add support for a new HW accelerator called
the Intel In-Memory Analytics Accelerator which we'll call IAA and
it will use the same (mostly) device driver (IDXD) as DSA. So, calling
the HW what it is will lessen confusion when adding IAA support.
This patch just does renaming for the accel_fw module and associated
files (RPC, etc).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib3b1f982cc60359ecfea5dbcbeeb33e4d69aee6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11984
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As introduced in 25bc221cee:
listeners for created subsystems should also be added
to discovery subsystem.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Id37854ea9a7877eb3e4eb37675d6918ef2931e7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Spread out used block devices evenly between
used initiators and then between initiators NIC
interfaces, so that in result each initiator
connects to the same number of subsystems.
Previous version had problems spreading block
devices / subsystems between interfaces in case
division remainder was not 0.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I045dc9313b0613685fc997f821fe66238026a645
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12732
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Save Initiator addressing information in Target object.
This will be needed later to properly spread created
subsystems between initiators and NICs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9e5545b7847bb16f3ce3d0ee56038003fda74e6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12731
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Always reload ICE driver after tests with ADQ enabled.
This is to reset tc qdisc and filter settings and make
sure they don't affect future tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I70b94ef236741fe81870954f9901e02b9b5aadb9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12622
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use different file to save calculated CPU utlization
and do not modify original SAR output.
Change-Id: I415242a5610f1c2a43a038baafa8dcc4f9e8fae2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12526
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move sar output file generation into measure_sar
function and pass a file name prefix instead.
More than one file will be created by the function
based on that prefix.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I671887d4d232821c0de19eb338150d30201be204
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12525
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Re-phrase "waiting" message a bit and add another
message notifying that measurements are actually starting.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I55d8ed761bf45a590322cffc5b776a44774977dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12522
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After 7610bc38d, python modules are now located in the python/
directory. That patch also updated PYTHONPATH assignment in most of the
scripts, but one of the perf script and some docs/messages were missed.
Change-Id: Iff3588526f2a382e599f5734d38fc32c15a7bf56
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12223
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix pylint findings:
- R0201 Method could be a function
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I1b9141b9ab150e20fdcd63510b484c6be514efb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12137
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Up until now, importing an SPDK RPC python module was just a matter of
`import rpc`. It's fine until there's another module called `rpc`
installed on the system, in which case it's impossible to import both of
them. Therefore, to avoid this problem, all of the modules were moved
to a separate directory under the "spdk" namespace.
The decision to move to a location under a separate directory was
motivated by the fact that a directory called scripts/spdk would look
pretty confusing. Moreover, it should make it also easier to package
these scripts as a python package.
Other than moving the packages, all of the imports were updated to
reflect these changes. Files under python now use relative imports,
while those under scripts/ use the "spdk" namespace and have their
PYTHONPATH extended with python directory.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib43dee73921d590a551dd83885e22870e72451cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9692
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK has settled on what the optimal DSA configuration is, so let's
always use it.
Change-Id: I24b9b717709d553789285198b1aa391f4d7f0445
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11532
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I80e1fdb8b0a3b944ab6efdd21187cef07b685c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11271
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add configuration options to enable using IDXD
for data digest during NVMe-oF performance testing.
Change-Id: I54d443c35c67e0331e3d6ec4aecb577fc7f544c7
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10282
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I72fc8cb42f57d3272a08a6cefc58b2fa5eb26419
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11094
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
As described in Python documentation:
It is not guaranteed that __del__() methods are called for
objects that still exist when the interpreter exits.
Because of that class instance objects were not always destroyed
after tests.
Change-Id: I10f05a480cde37d274d6475efdf47d094cab7cb9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11136
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I780568b9c95a47038278c3ed19fb08228a48fb9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10740
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
TypeError: ethtool_after_fio_ramp() argument after * must be an iterable, not int
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I12403967b5b8ce7282c65296a54e00bd047cf903
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10367
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When I use a single json config to run 4k and 64k together, the IOPS
for the 4k test were lower than expected because the script is using
metrics from both the 4k_64_randrw_m_100_* and 64k_64_randrw_m_100_*
to calculate the average metrics because 4k_64_randrw_m_100_* is in
64k_64_randrw_m_100_*. Fixed issue by checking, if the result file
startswith the name of the fio config file.
Change-Id: I630385c34223b38694d7e2bb578779627c89866d
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
A temporary workaround for issues seen when using "adq_enable"
is to set channel-pkt-inspect-optimize on before fio ramp_up and
turn it off when ramp_up is ending.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I74f71d11e3b9d1a064b36de8acc7a2a23f51a34b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
* Added sleep as sugested in config guide
* Moved adq_configure_tc() before nvmf_create_transport()
* Added extra logs to output
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Icc253b98a0fadbe917e912342f91e2bc5ca5064b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9703
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ibcc7a77d1ebcc013b5050564fcc31b23b1202912
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1a4d32de6a83800cdcd65dde3895a36731c52838
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9710
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ia858a47e51a6ef4a0fba1dc1e68d314b27e20342
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9276
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Do not print ETA output. This pollutes logs when long
benchmark tests are run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0dfe30fdd727decb4d81be6b530e675bc1f4518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add option to enable gathering BPF traces while
running the test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9ea317a37c3638def40a525eca06f2d8325a74c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8644
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
