Locating spdk_bdev structure to the beginning of raid_bdev structure
will simplify the hierarchy and match other bdev modules.
Change-Id: I1bfbf773bc96a4f144e6bff772ade05bb42762e9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420818
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
No longer send an event to process the pending queue -
just do it inline.
Change-Id: I32716c9ecac3791de297c2a48529c15d220dbe6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
recover was only called by drained, and they're relatively small
Change-Id: I65002cfe13d0045a37609be5b85be087402b4a65
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421043
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There is no need to keep attempting to abort all requests later on,
there won't be any in these other states.
Change-Id: I7b12e10b87e0d0bb4a74fdf67fb278b443e70e8a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The state of the RDMA qpair is not entirely initialized (RTS)
until after the CM event is accepted. Delay caching the state
until then.
Change-Id: I39befb867fc6a01e94d7fc176071aaabb906bd07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
IBV_EVENT_SQ_DRAINED can occur during both error recovery and
normal operation. We don't want to spend time sending a message
to the correct qpair thread and then attempting to abort
all I/O in the case where this wasn't triggered by an error.
The case where this occurs during an error is very rare and
only in response to a user forcing the state to err from the
sqd state. For now, don't handle that case at all. Handle that
corner case in a later patch.
Change-Id: I16462ca52739b68f6b52a963f7344e12f7f48a55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This was the only call point of two very small static functions,
so merge them into the main body.
Change-Id: Ifdd3355ffd500ac5ad4fcf69feace65b35132906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420935
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The update call was never used independently of the get
call, so combine them
Change-Id: Ibae622e5fd23203e79ceeae1aeccc5c7d9d1ebc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420934
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Currently, the bdev layer iterates over all of the
existing channels of a bdev to collect I/O
statistics. But this ignores statistics for
channels that are deleted.
Fix that by keeping an io_stat structure in the
bdev which accumulates statistics for deleted
channels. Use the bdev mutex to protect these
accumulations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3103c0b8b55973c827d977765f47e5b9e7f58e5f
Reviewed-on: https://review.gerrithub.io/421029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used further in an additional patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1126e5adfc24f17e5cdf33b0d3e04c78470771c8
Reviewed-on: https://review.gerrithub.io/421027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should not use mutex, but use the spdk_send_msg policy,
then we can let only one thread to handle that and
eliminates the segement fault issue.
Now in the code, the qpair_mask is handled by the same
thread, e.g., the thread which owns the admin qpair of
the ctrlr.
Change-Id: I609fd4d49f5ecc85bc47bf9c23afbb507900be7c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix the issue #379.
Change-Id: Ia953d4ebe232d389ba3264074592ae8d0cff467a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/421078
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Many functions were inconsistent in regard of error codes
they returned. In a couple of places we could print "Operation
not permitted" via strerror() from functions that were
supposed to return negative return codes, but returned
`-1` instead. (-EPERM == -1)
Change-Id: I7c36e54d449352dbd8036746e4f44a65c9b1d0b3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/419007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch fixes github issue #385.
We need to unregister previously created NVMe controller
when creation of NVMe bdevs fails otherwise we won't be
able to use NVMe device as it will stay in wrong state.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I28a165aba1a556a2ed2d4cd5ff6fd510e80657d3
Reviewed-on: https://review.gerrithub.io/421006
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need to decrement the free_cnt before checking
if it reached 0.
Note: the vq_free_cnt overflow is asserted at the
beginning of the function.
Change-Id: I655217785e4425d1cd3c704d24321b643be55dcf
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Release nvme rdma ctrlr before exit the nvme_rdma_ctrlr_construct function
when creating the admin qpair fails.
Fixes GitHub issue #363.
Change-Id: Ib988e0da2f627db06b68bd3fb72c117c52572cf8
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/420719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Asking which thread we're currently on is more expensive
than sending a message.
Change-Id: I9d9007c9f7f30e4cdd9a97de6bf7a10b0e2a0594
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420933
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These were left out previously.
Change-Id: I4e97068d2f13ca1dd1cfae1b25564641cee794ef
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Two extra fields are added to the iostat rpc.
1. io_time. The amount of time since queue depth tracking was
enabled that has been spent on I/O processing.
2. weighted_io_time. Incremented each time this bdev's queue depth is
polled by the amount of time spent processing I/O since the last polling
event times the measured queue depth.
Change-Id: Ie70489ec24dee83f3eeac8f4f813ec7074ff458f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419031
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If90434452dba51fbb72c8c486e3c1e4691549c34
Reviewed-on: https://review.gerrithub.io/420845
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the reordering of the nvmf_tgt states, we need to remove any
connections accepted during the shutdown pahse of the target.
Change-Id: I768484366da8273df74b8d52a3e8de6158b6995f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Now that the acceptor poller is also checking for asynchronous rdma
events at the transport layer, we need to make sure that this is running
until all of the poll groups are deleted.
Change-Id: I34973047fcb247b8a5a36cc7db681ab0b3cb0779
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, qpair deletion was synchronous and handled by the
io_channel_destroy_cb for the target. However, with the new asynchronous
qpair deletion api, these qpairs need to be completely removed before we
free the i/o channel and the poll group.
Change-Id: I42c62391df62825d53e158306c4372523403ad27
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The poll group pause, resume, remove, and add functions are only called
from the subsystem_state_change_on_pg function. Previously, they would
return immediately and the state change would move on to the next
channel. However, some of these functions (specifically remove) kick off
asynchronous APIs and we should not iterate past them until those
asynchronous operations complete.
Change-Id: I78804273b39f2d171ba26ac4478ad515356833f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419289
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Even after the bdev is removed, the underlying virtio
device may be still alive for some time. The user may
then try to recreate the virtio bdev and could technically
initialize a second simultaneous connection to a vhost
target. It does not cause any technical problems, but the
target may reject such connection if it reached a connection
cap or doesn't support more than one connection per target
(like SPDK vhost does as of today).
Since the fix is straightforward, here it is.
Note:
Virtio SCSI is already safe, because it uses a separate
completion callback to indicate virtio device destruction.
Change-Id: I2989780ef9b13c19d0432224ff4602a14be48315
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Daisuke Aoyama originally contributed to istgt, the
iSCSI target in FreeBSD. The SPDK iSCSI code is
originally derived from that. Due to copy and paste,
some incorrect copyright attributions have been added
to other files that do not derive from istgt, so
this patch removes those.
It is doubtful, at this point, that there is any code
whatsoever that remains from the original istgt, but
we can revisit that at a later time.
Change-Id: I207e1e6b99d271e2f12690be90a96f7d0c113af7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use strdup for all strings allocated by JSON decoder and free them on
all paths.
Change-Id: Ia30d32c2fd6bd79f62588ca19bd3bb093d38a502
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Also, don't try to remove any bdevs. The bdev layer
does that before module fini is even started.
Change-Id: I869f4b9e6d8590bfae2504a96d971c4f8866aeb9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For front-ends like iSCSI (and NVMe-oF in the future)
which want the backend to specify the data buffer, the
RAID module doesn't copy the pointer to the allocated
buffer from the child IO back to the parent IO. It
really can't copy the pointer - the child IO owns it
and will free it.
So the RAID module needs to allocate the buffer first
and then pass it down.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b1eceac9b1cdd26130e59e1d400c9869a19f881
Reviewed-on: https://review.gerrithub.io/420677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is needed for next patch which needs to defer reads
when getting an io buf.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If31e7d76384c7fd05cc77a3b2124ee4e9354823e
Reviewed-on: https://review.gerrithub.io/420676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: If25463ea76e8382c61f10636e1119376a00104dc
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is necessary to avoid race conditions when freeing subsystems.
Change-Id: I9b4a7d006cc42cd29e13179e940ced0cc580f548
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This ensures that when we continue to iterate through channels after
deleting the qpair, we will be able to continue iterating through
channels.
Change-Id: I6fba43dc14a3e5e8faac78f8b37e9e0c6aad2687
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is necessary to free the AER without sending a completion to ensure
that the host does not attempt to send an additional AER upon receiving
the first completion.
Change-Id: I2b3f8f286d6396019d8ace97d2376547705b8d9d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fixes a memory leak and a possible data race.
Change-Id: Ib094ca62e66d8d3a88b0acccc92e69214d413e72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420573
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Besides the obvious memory leaks, we also need
to call the async completion callback, which may
also free some resources.
Change-Id: Ia80799be4b220053b82dfb4ee2453181c90136a1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420571
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK 18.05 introduces a new "runtime" directory,
which contains hugepage metadata to be accessed
by secondary processes. There may be multiple
files per each memseg and we cannot easily predict
their count, so this patch deletes all regular
files in that directory.
$ ls -l /var/run/dpdk/spdk_pidX
total 16784
-rw------- 1 root root 4096 Jul 27 15:10 fbarray_memseg-1048576k-1-0
-rw------- 1 root root 188416 Jul 27 15:10 fbarray_memzone
-rw-r--r-- 1 root root 16974144 Jul 27 15:10 hugepage_data
-rw-r--r-- 1 root root 12432 Jul 27 15:10 hugepage_info
srwxr-xr-x 1 root root 0 Jul 27 15:10 mp_socket
The DPDK config file is not located in this directory
yet to preserve some of the backward compability.
Eventually, it will moved there as well.
Change-Id: I61cf1a47b306b51b0817c9d870841508f1e5e604
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It was never destroyed.
Change-Id: If10b23b0a6784994a5aac85968f7efb99fa6ba70
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
create_iscsi_lun freed the provided parameters under
one condition, and did not under some other. The
behavior is now clarified.
When create_iscsi_lun succeeded, the parameters are
passed to an iscsi bdev and will be freed together
with its removal, but if the bdev could not be created,
the params need to be freed manually.
Change-Id: I010421d48461b365a324488029e11c90a4e20a37
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
It is not required anymore.
Change-Id: Ic16003311a451a223a626eca63cd9308a196bbdc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420568
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Bdev module fini is triggered after all bdevs get
unregistered - this includes all iscsi bdevs. There's
no need to unregister/free them manually.
A few words for the iscsi_logout_async call, which was
never possibly called, but is now completely removed:
Destroying the iscsi context, which is done at bdev
destruction, will "tear down any existing connection"
as the libiscsi docs say, so there's apparently no
need to perform a manual logout.
Change-Id: Id163668a19a1d4b9bcd7538ecd1c0febae0fe47a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Blobstore uses 1MB cluster size by default, but logical volumes
override it to 4MB by default. When an existing lvolstore is loaded,
all cluster calculations were being done based on the 1MB size - not
the 4MB cluster size read from the superblock. That would result
in asserts (due to mismatched used cluster mask size) and all kinds of
other possible weirdness with subsequent operations.
Fixes: 2c91e91907 ("blobstore: Save the original size of the disk.")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d57c2b64aba791903e69560b9fe5684a72669df
Reviewed-on: https://review.gerrithub.io/420582
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Though the buffer can be allocated in the normal case,
however we still need to check it.
Change-Id: I483c7bd083c24590295e44473674c7b8ed30e9da
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420462
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for virtio bdev.
This is generic call for both - blk and scsi.
Scsi specific call has been removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3ed629942e9ef6067b488d94ca508b40e9e74f42
Reviewed-on: https://review.gerrithub.io/417008
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for NVMe bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib9a0475d735af2616a3005d04530ca825ece8a52
Reviewed-on: https://review.gerrithub.io/416546
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since destroy_lvol_bdev was implemented, it is now more convinient
to call destroy/unload for lvol store explicitly.
Rather than using lvs struct to pass a request checked on each
lvol close/destroy.
Change-Id: I56ee626e96f8752909d1584a20fe3345c5607fdc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a module fails during init, github issue #363 reported ASAN
errors due to leaks from not cleaning up modules that may have
completed init before the failure. An earlier partial fix was
added, this is a more correct fix that addresses the specific
scenario reported as well as the simplified one used during
early debug...
Change-Id: Ia43476faf33d8e31b581529de3b6d75caed09096
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/420118
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also make the iov_len always set to the used length, not
the total length of the buffer.
Change-Id: I7ebb5b63c6ca7570369f4af0131a23c520c1f7b0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/419025
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes queue handling for QEMU 2.12 which is sending new memory
table but resetting only some queues
Fixes#339
Change-Id: Ic971725261720d7459e49a4f14bc15c2f2a77b1a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/420372
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Chen Wang <chenx.wang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some functions should be executed togther, so
group it into a single function which will avoid
the potential issues.
Change-Id: Ie57be20aa76d9bece82b5534c3c5fc6c9faeebad
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should check the value of error info. If it
is error, we should not do the read anymore.
Change-Id: Ie3527766779a1f4ed98dde7d9881fe66720badc4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In python script:
- timeout should be nop_timeout
- min_connections_per_core was min_connections_per_session by mistake.
- max_queue_depth was not included.
- call_cmd was missing.
- A space should be added after semicolon ":"
In SPDK library:
- type of options was not int32_t but int. Hence decode failed.
- type of options in dump were not correct.
Change-Id: Iaa79236c03d368cdf286a72c2386509ffa81530f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/419553
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If it fails to allocate the buf, we should conduct
the error handling.
Change-Id: If36b2dd84236052c777f5007ecbf7295e1c1d3eb
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The two values are all default values.
Change-Id: I117eb217b71c3f079a4450c6f716f9bb70762399
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use free() instead of realloc() to free allocated memory.
Currently realloc() is used to free memory unintentionally. Hence
the pointer is not nullified and it has caused double free.
realloc(g_spdk_raid_config.raid_bdev_config, 0)
is equivalent to free(g_spdk_raid_config.raid_bdev_config).
Use Shuhei's patch https://review.gerrithub.io/#/c/spdk/spdk/+/420224/
as a reference.
Fixes GitHub issue #372.
Change-Id: If3b761e3ac10844f734dab9b10d202db9ddc79c0
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/419975
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is not an error if bdev is smaller than cluster size so convert this
error to infolog. This fixes false error message dring examine process.
To return proper error message when creating blobstore using RPC the
_spdk_bs_alloc was adjusted to return errocode that is propagated up and
converted to "No space left on device".
Fixes#316
Change-Id: Ic9803720a55125fcfa34263346f2d9e1aae03a53
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/420054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch fixes lvol delete behaviour.
First, we look if there are any dependencies that disallow lvol deletion.
If there are any (i.e. dependent clones) we fail.
Otherwise we delete lvol and unregister associated bdev.
destroy_bdev no longer deletes lvol.
Fixes#345
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I99e6abded2ed3ae2742103f81fc7eb937ad1cab4
Reviewed-on: https://review.gerrithub.io/407402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently passing pci whitelist and blacklist information to DPDK is done
by using single dash option -w and -b, respectively.
However this didn't work as reported in the Github issue #362.
Hence use two dashes option --pci-whitelist= and --pci-blacklist for
pci whitelist and blacklist, respectively.
In the Github issue #362, more issues are reported. These will be done
in subsequent patches.
Change-Id: I4e36edfce90e34577e34605d5b19658554fb2496
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420211
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reason:It will be helpful for the debug, and
for some places we need to handle no memory
case.
Change-Id: Id221a856b1f65fe7b946dec246bb53532a29db78
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When testing iscsi reset with bdevperf, all tasks
before will be canceled. And the return status will
be set to CANCELED. We need to trace this status.
For submit_td, sometimes, segfault is thrown because
in bdev_iscsi_io_complete the iscsi_io->submit_td points
to a invalid address. And assigning the submit_td in
bdev_iscsi_submit_request prevent this from happening.
Already tested with bdevperf and bdevio for all io types.
Change-Id: Ib2bf8e2a111c4b3edb5ed88dfd2c91ed6acc5c48
Signed-off-by: Chunyang Hui <Chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/419932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK holds off with using the new dynamic memory allocation
mode just yet.
Change-Id: I75541135a020c691d981d2b16e7c9509b1cc57b1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/419567
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added proper paths for examine:
- if lvs loaded, do spdk_lvs_unload
- if lvol created, call spdk_lvol_close instead of spdk_blob_close
Change-Id: I77a2905417d1c53f36b96da3fbea2679d9a2f56d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change the type of nvme_timeout parameter in
spdk_nvme_ctrlr_register_timeout_callback from uin32_t to uint64_t.
Reason: This will make the timeout trigger test more flexible and
will not affect the original meanings.
Also for the configuration file, still maintain the compatability
support
Change-Id: I94c90f67b2e9c57220ab82ecea11a1590d62aed4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It will save the space of spdk_xattr when put uint16_t after
uint32_t
Change-Id: Ie0712d8c3b16d90fc354847509fd87e1ffd93916
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419453
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the event that one bdev module failed, we'd leak a bunch
of stuff from any that init'd correctly beforehand. Also
added a guard around the calling of modile init_done routines
so that it's not done if module init didn't work.
Change-Id: I4e6170e1eee67b131252ed30d0d20124d2c5ff35
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/419446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
RPC method (nvme-passthrough-cmd) needs base64 to
transfer binary buffer of nvme-cmd through Json text.
Change-Id: I50b9d0efca97da45d6d4fd2a1b53b74811947191
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/417805
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
RDMA QP is attempted to recover after IBV_EVENT_QP_FATAL event
is received from IBV asynchronous event API.
RDMA QP is put into ERROR state and is not processing any inbound
requests. The outstanding requests are only allowed to COMPLETED
and FREE states, no outbound transfers are performed.
IBV_EVENT_QP_LAST_WQE_REACHED or IBV_EVENT_SQ_DRAINED event is
expected to follow IBV_EVENT_QP_FATAL, giving a go to draining of
all outstanding requests and freeing the associated resources.
The requests executed by block layer are gracefully allowed to
complete, but no outbound transfers are made.
Note, outstanding requests can not be reliably completed through
polling the CQ, as WC's with failure status might not have all
the fields valid. The failed WC's are dropped and the outstanding
requests are fetched from the appropriate state's linked list.
QP recovery is triggered when there is no more outstanding requests.
If QP recovery is completed succesfully, the RDMA QP is put back into
ACTIVE state, the QP disconnect is triggered otherwise.
Change-Id: I45ee7feea067f80ccc6402518990014d691fbda3
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416879
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function always return 0, so change the type of function
to void
Change-Id: I715cf82c74619a2707b8e5a453710a992489f2c8
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch prevents to copy cluster data when there is not
backing blob to improve cluster allocation performance
in thin provisioned blobs.
Change-Id: Ie766d2e5274daa74c2b13b2198a20205e3417467
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/417938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Before this patch when serializing extents,
unallocated clusters were treated as separate lba.
This caused metadata to grow without need.
Change-Id: I5d66466dda5f5e6d4d53f4ed5bd0bac18c74be96
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/419180
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When hot removal of a LUN is started, callback is called for each
iSCSI connection which accesses the LUN. Callback checks all transfer
tasks complete and then close the LUN.
If the connection clears all transfer tasks before getting all responses
to them from the initiator, the initiator continues to retry data write.
Hence the connection have to wait until all transfer tasks complete.
Change-Id: Iad9063673cfedbd78758890d55a4254512e4fca4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use a descriptor got by opening the LUN to allocate IO channel of the LUN.
This requires opening the LUN is done before allocating IO channel of the
LUN.
Use the descriptor to free IO channel of the LUN too.
Additionally, assert is added to the close LUN function to check if
IO channel is freed before the last close LUN function is called.
Change-Id: Iafb2f9ce790fff25801ea45b3286f3e26943807b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To remove a LUN safely for iSCSI multiple connections, each connection
must return I/O channel after checking completion of all tasks.
Open/close mechanism provides a way to register callback to do it.
Registered callback will be called after checking completion of
outstanding tasks.
Making the close LUN function public is necessary to support hot removal.
Change-Id: I06d50d016b0b7aba0d081da226f5b2e0c911629e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It appears that we can get caught in a loop when shutting down a
subsystem if there is a qpair that has been moved to the deactivating
state due to the target shutting down early. These qpairs don't have a
state cb and won't ever be destroyed or removed from the global list.
Change-Id: I4f9ed774a94e0e2c7ff7bfa3af1776b38a787035
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419269
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK has an option "huge-unlink" which can be used to
remove mmapped files after EAL initialization, SPDK
doesn't enable the option by default, ethier DPDK,
while here, export a new parameter which can let
user to decide enable it or not.
Fix issues #349 and #350.
Change-Id: Ic516b9f48f7b1c7c51712cc7bb7475ed904ff24b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/419156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When spdk_put_io_channel is called, if its the last reference,
we defer actual destruction of the channel, so that code
in the same context which may be referring to the channel
doesn't crash.
But it is possible that an io_channel for that same io_device
could be requested before the deferred message is processed.
This would result in a second io_channel being created for
that device on the same thread.
To avoid this case, don't immediately remove the channel from
the list when the last reference is put. When the deferred
message is processed, if additional references were allocated
in the meantime, don't destroy the channel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Idb8d4705fda0eb9c338e4960430e04edbe537e05
Reviewed-on: https://review.gerrithub.io/418878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Raid module:
============
- SPDK raid bdev module is a new bdev module which is
responsible for striping various NVMe devices and expose the raid bdev
to bdev layer which would enhance the performance and capacity.
- It can support theoretically 256 base devices (currently it is being
tested max upto 8 base devices)
- Multiple strip sizes like 32KB, 64KB, 128KB, 256KB, 512KB etc is
supported. Most of the current testing is focused on 64KB strip size.
- New RPC commands like "create raid bdev", "destroy raid bdev" and "get raid bdevs"
are introduced to configure raid bdev dynamically in a running
SPDK system.
- Currently raid bdev configuration parameters are persisted in the
current SPDK configuration file for across reboot support. DDF will be
introduced later.
High level testing done:
=======================
- Raid bdev is created with 8 base NVMe devices via configuration
file and is exposed to initiator via existing methods. Initiator is
able to see a single NVMe namespace with capacity equal to sum of the
minimum capacities of 8 devices. Initiator was able to run raw
read/write workload, file system workload etc (tested with XFS file
system workload).
- Multiple raid bdevs are also created and exposed to initiator and
tested with file system and other workloads for read/write IO.
- LVS / LVOL are created over raid bdev and exposed to initiator.
Testing was done for raw read/write workloads and XFS file system
workloads.
- RPC testing is done where on the running SPDK system raid bdevs
are created out of NVMe base devices. These raid bdevs (and LVOLs
over raid bdevs) are then exposed to initiator and IO workload was
tested for raw read/write and XFS file system workload.
- RPC testing is done for delete raid bdevs where all raid bdevs
are deleted in running SPDK system.
- RPC testing is done for get raid bdevs where existing list of
raid bdev names is printed (it can be all raid bdevs or only
online or only configuring or only offline).
- RPC testing is done where raid bdevs and underlying NVMe devices
relationship was returned in JSON RPC commands
Change-Id: I10ae1266f8f2cca3c106e4df8c1c0993ddf435d8
Signed-off-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-on: https://review.gerrithub.io/410484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
If command is completed manually (e.g.: driver decide to fail this
command from some reason) not all NOTICELOG informations about this
command are valid. To not get confused who completed the command (driver
or a device) show addtional information when command is completed
manually (using NOTICELOG like nvme_qpair_print_command and
nvme_qpair_print_completion do).
Change-Id: I7211bd165aec142ad11e806fa3031371375edd2f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/411293
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Considering the I/O size is variant from small in byte to
large in megabyte, need to consider the compensation of less
allowed bytes in next timeslice if the current timeslice
sends more bytes down.
Change-Id: I885f0bb21001bd90879aa8622e2b34e3bf78cf6e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/417829
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When multiple LUNs are attached and spdk_clear_all_transfer_tasks() is called with
a LUN, all tasks whose target is the LUN are removed and there will be room to start
queued tasks for other LUNs. However currently no migration is done.
Add UT code to verify the fix too.
Change-Id: I082d370ab86a46e5b4a74a16293a572fae663add
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/418765
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add some known Samsung controllers to those requiring the quirk,
NVME_QUIRK_DELAY_BEFORE_CHK_RDY. Addresses an issue for those
who may not have later firmware that corrects the problem.
Correspondingly, extend the delay from 2 secs to 2.5 secs.
Change-Id: Iee773905a2a49711775042c061f6c347e0da85e9
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/419273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This also save CWD on init so socket path is no longer relative.
Change-Id: I303401fe0340f0bc2ea5e4ba468361f68ea84c3d
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/419067
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These parameters include read and write latency ticks, current queue
depth, and the period at which the queue depth is beign polled.
Change-Id: I7c57177e3cd1629b957a16dd8f4fa992ef53ae3d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/418117
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change includes a function to enable this feature on a per-bdev
basis. The new information stored in the bdev includes the following:
measured_queue_depth: The aggregate of the outstanding oparations from
each channel associated with this bdev.
period: The period at which this bdev's measured_queue_depth is being
updated.
With this information, one could calculate the average queue depth and
the disk utilization of the device
Change-Id: Ie0623ee4796e33b125504fb0965d5ef348cbff7d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/418102
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The spdk_dma_zmalloc guarantee about physical memory contiguity
is about to be removed soon. For hardware rings that require
physical memory or IOVA contiguity we will now enforce hugepage
alignment and size restrictions to make sure they occupy only
a single hugepage.
Change-Id: Iebaf1e7b701d676be1f04a9189201c5d89dad395
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/418547
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Requests that are being put into IBV context are lost when
IBV QP breaks and its SQ drains.
In order to track NVMf/RDMA requests, RDMA QP has been
reworked to track requests at any state with queues of
requests for each state.
This allowed to get rid of a few intermediate queues and
request counters.
A couple of states has been added to track outbound requests
with and without data. They will be used by QP recovery for
freeing resources assigned to outstanding requests.
Change-Id: Ie84207325c38e5bb2c247cd6dcddb82dfad0d503
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/416878
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We didn't handle vq alloc or init failure, because
queues are initialized all at once on device init and
if one vq fails, all of them are to be destroyed.
This behavior is really unintuitive, and with the
latest changes we have a possible segfault scenario.
(We could spdk_dma_free() a buffer that failed to
allocate).
It is now required that the queue allocation function
cleans up after itself.
Change-Id: I6cd1d30c710eb9266288905ab982db363f972a1d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/419001
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_dma_zmalloc guarantee about physical memory contiguity
is about to be removed soon. For hardware rings that require
physical memory or IOVA contiguity we will now enforce hugepage
alignment and size restrictions to make sure they occupy only
a single hugepage.
Change-Id: I8f44ad6f33d60f01403cc3db693497e4f722e528
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/418612
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removed unneeded (and too generic) #define errors.
Change-Id: I26343504aaefb7e982d4dca35ffade8c70406f08
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Reviewed-on: https://review.gerrithub.io/418881
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Most of the error paths in this function leaked resources. Make them
all use spdk_nvmf_rdma_destroy() so all resources are consistently
freed.
The spdk_io_device_register() call is moved to the top of the function
so that the io_device is always valid when calling the destroy function.
Change-Id: Ic92f09f157ee8245fb962d8bc3330aadd87b294a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418869
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
rdma_get_devices() may return NULL on failure; we need to check for this
before dereferencing the returned pointer.
Fixes GitHub issue #360.
Change-Id: I9628e5865365d256f4b1887bf07ce8737b55d356
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418868
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Rather than adding the full alignment size (512), add one less than the
alignment so that already-aligned buffers don't get rounded up again.
Change-Id: I96323b848bfb90f2aa1774b869e2b8a81d253077
Reported-by: Shuhei Matsumoto
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418879
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New header file for NVMF FC transport defining FC data, functions
and low level FC driver interface.
Change-Id: I3fd24e93cefa06647003eeb27d79166469fb4a05
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/415057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to scsi bdev.
Change-Id: Ia6a5be871ae09a4d1166991925f0a44f3b355bdd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI reset function return code is not used,
so there is no need for it to have return code.
Change-Id: Ib647109c75b1546675d2601fa00004e1ef186024
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I59f4f69ed695cc9a2b6d0b87052fdf50004ee1c7
Signed-off-by: Senthil Kumar V <senthil.kumar.veluswamy@wdc.com>
Reviewed-on: https://review.gerrithub.io/418170
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I54793624e46a4e51b0c989ddfe933ccb5f035123
Signed-off-by: shahar salzman <shahar.salzman@kaminario.com>
Reviewed-on: https://review.gerrithub.io/417858
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is verified on QEMU NVMe which merged the related patch.
Change-Id: I7c62d7a91350e0a877d1c3651796c38b55122f98
Signed-off-by: Young Tack Jin <youngtack.jin@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/417077
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Matias Bjørling <m@bjorling.me>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
qpair_disconnect has previously presented an entirely synchronous API.
However, it relies on other asynchronous operations to complete its
task. By giving it an asynchronous API, we can avoid possible race
conditions. Patch 1 of several.
Change-Id: If9e26ee70ae5d6c0273750226b4408a8e4587e19
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417345
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
A few open-coded sequences equivalent to SPDK_CONTAINEROF() were
scattered around; replace them with the macro from spdk/util.h.
Change-Id: I95c6e6838902f411420573399ced7c58c2e4ef84
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418126
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a check to prevent spdk_mem_map_set_translation() or
spdk_mem_map_clear_translation() calls that start within the valid
address range but specify a size that would access parts of the mem map
outside of the valid region.
spdk_mem_map_translate() is safe without any extra checks since it only
accesses the first entry regardless of size, and the MASK_256TB check
catches out-of-range accesses to that entry.
Change-Id: Ie1437e57b5158363bb98a6b42a26fb41a089bbad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418106
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The arrays for both the map_256tb and map_1gb structures were twice
as large as necessary; fix the sizes and add unit tests for the boundary
conditions to verify that the fix works.
Change-Id: I66bce463f234f54e69cf2a697db9f806d398ca1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418105
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It's not required. We only use it in virtio-pci.
Change-Id: I61e95d680d00fa3d56ebccbc9a372db7e1db296d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417002
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously when IO was sent to bdev, even without callback yet,
status for task was set to SPDK_SCSI_STATUS_GOOD.
This patch changes it so that it is only set when callback actually
comesback from bdev via spdk_bdev_io_get_scsi_status().
Change-Id: I4a36ec345608257123e1036d31540f5f1090a23b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is not any plan to support bidirectional command. To understand implementation
of residual count a little easier, remove residual count variables about unsupported
bidirectional command.
Change-Id: I1154e2e2708cc47c5bd4630ce9a91980f433fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417216
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This bug was caused by the following two changes:
iscsi: Remove duplication of the variable for write completion to bdev
https://review.gerrithub.io/#/c/393582/
iscsi: restore data_transferred accumulation for read
https://review.gerrithub.io/#/c/393713/
For write, bytes_completed is always equal to data_transferred. However,
for read, bytes_completed is based on expected data transfer length and
data_transferred is actual read size. Hence bytes_completed cannot be
used to calculate residual counts.
One of the reason why this bug cannot be found was that there was not any
test case when task->scsi.data_transferred is 0 and task->scsi.length is
not 0. Hence UT code is also added.
Same bug will occur for read sense data. Hence UT code for read sense data
is added in the next patch.
Change-Id: Ib1a283b769e5af0c2d05acb69f90948c5d658087
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417960
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
During spdk_bdev_init, examine_config is called.
This call can claim bdev synchronously, based on
configuration. On spdk_bdev_start if none module
claimed bdev, examine_disk is called and can
perform I/O before claiming bdev.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I1448dd368cf3a24a5daccab387d7af7c3d231127
Reviewed-on: https://review.gerrithub.io/413913
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Right now both virtio-pci and virtio-user allocate
the queue via spdk_dma_malloc, but that's about
to change soon.
Change-Id: I3acdad45cd9a0639f9070bc448fdf8f9d2c706c0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417000
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This was omitted in the original implementation and the
`del_queue` callback wasn't called anywhere. For virtio-user
we open some eventfds on queue creation and until now they
were never being closed.
Change-Id: Iee1ced1e17a59d5cb13449538c115678a1c1a328
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416999
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_dma_zmalloc guarantee about physical memory contiguity
is about to be removed soon. A single tracker is page size
aligned and is exactly one page big, so it is physically
contiguous, but we can't assume an array of those is physically
contiguous as well.
Change-Id: I3aa4d14dd677601c30aa2d8f15197886d6c46e58
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/416840
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There was a plan a long time ago to try to output all
unit test results in JSON format for post-processing.
It is used by only one unit test file currently, but the
results aren't used and there are no plans to use it in
the future or extend it to other unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I72c409090bbd7b8fa7ec307bbc97f97ccf2e397c
Reviewed-on: https://review.gerrithub.io/418112
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia413a913857dad00ae091b8cea02a647b8996a5c
Reviewed-on: https://review.gerrithub.io/418108
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no reason to abort IO that have been queued
due to QoS limits, when QoS is switched from enabled
to disabled. Submit them to the bdev instead.
Fixes issue #357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If5eafc53418ac686120e1d6a1da884b42cef845e
Reviewed-on: https://review.gerrithub.io/418128
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The device might not have this message implemented.
Sending it could result in a connection being terminated.
Change-Id: I53c08f1108ebc7de630569f3983c317cc6510fa4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417636
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
For vhost-user it's a protocol feature that can simply
be not supported. The subsequent patch introduces an extra
check that may cause config read/write to fail.
Change-Id: I5b0e11845fb6021472c608477f1797dada8ab961
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417458
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
It was introduced a while after the original GET/SET_CONFIG
implementation in QEMU, but within the same QEMU release (2.12?).
It is required by the vhost-user spec. Rte_vhost doesn't check
it, so everything worked so far, but other implementations
might (and should) reject our GET_CONFIG requests right now.
As a part of this feature, we should also check the same
flag before sending GET/SET_CONFIG messages to respect those
devices that really don't implement F_CONFIG. This is done
in a separate patch.
Change-Id: Ib7e9b11a0074f4aee70609af0cad2ef59a8bf427
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417459
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Required by the vhost-user spec.
Change-Id: Id7143a0f6cc34463ad5f22d8db96ac5c51e04081
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417457
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
rte_vhost doesn't respect those, but any other
implementation should.
Change-Id: Id0a0fa031b7c6e9d572cdffeeb3a1e40d824826d
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417456
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe PCIe transport only requires physically contiguous allocations
for struct nvme_tracker and the I/O SQ and CQ entries, which are already
handled separately. Change the comments to indicate that struct
nvme_payload's contiguous type only requires the memory to be virtually
contiguous, since nvme_pcie_prp_list_append() already steps through the
buffer and translates each (4K) page independently.
Change-Id: I45ac8dfb2c033a0fcbf2effbe33af4efc1eb23cb
Reported-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/417045
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The IOAT "ring" is actually just a circular linked list of descriptors;
the descriptors do not need to be in a single physically contiguous
region. This can be accomodated by calling spdk_vtophys() on each
descriptor rather than assuming they are all in a single contiguous
region.
Also store the physical address of each descriptor in its associated
software descriptor context to avoid the need to call spdk_vtophys()
during runtime.
Change-Id: Ic8636bbc61deb496a0c6d0ea56b75d298f5f426c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/417782
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Print an error message instead. The driver can still do
a manual rescan if it wants to see the new SCSI target.
Change-Id: Ieb76ada8625bf00ad068a791b860e4b08ad5cb83
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417268
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e7ff07de8b06afb45b1059d455c8fe854035640
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/417783
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also make it correctly account for alignment and automatically
use the internal iov element if necessary.
Change-Id: I0b33ef9444f0693c2d6b0cdaf221c4a5b0ad2cc3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/416870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is potentially useful for more types of commands.
Change-Id: Ifbde7ae35294f581b8360891579836fd6f9573a6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/416869
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This makes it possible to build SPDK on a machine which doesn't have
CUnit installed.
Change-Id: Icb4c01092d1432fcff4bdbbfa01489d1ddfcdd8b
Signed-off-by: Mike Playle <mplayle@solarflare.com>
Reviewed-on: https://review.gerrithub.io/417663
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
