This change attempts to address the Trello request to decode I/O errors in
NVMe hello_world example.
See https://trello.com/c/MzJJw7hM/2-decode-io-errors-in-nvme-helloworld-example
As part of this change, spdk_nvme_cpl_get_status_string was declared
in nvme.h, and spdk_nvme_qpair_print_command and
spdk_nvme_qpair_print_completion were renamed and added to nvme.h,
allowing all three to used "externally."
To test the failing paths, two compile time defines were added to force a
write or read error (bad LBA) respectively.
As the example does a read after write, if the write fails, the example fails.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Ib94b4a02495eb40966e3f49517a5bdf64485538a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457076
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Blob id only is matched to the very first page of md for
that particular blob.
During loading blobstore, we shouldn't verify
further pages in chain against the blobid.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc7863ddcb403aedc264c14e6b4c3915bd30dc41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Moving data from one band to the other doesn't need to be stored on the
non-volatile cache. Not only does it add unnecessary traffic to the
cache (wearing it out and reducing its throughput), but it requires us
to synchronize it with user writes to the same LBAs.
To avoid all that, this patch adds the FTL_IO_BYPASS_CACHE flag to all
writes coming from the reloc module. However, to be sure that the moved
data is stored on disk and can be restored in case of power loss, we
need to make sure that each free band have all of its data moved to a
closed band before it can be erased. It's done by keeping track of the
number of outstanding IOs moving data from particular band
(num_reloc_blocks), as well as the number of open bands that contains
data from this band (num_reloc_bands). Only when both of these are at
zero and the band has zero valid blocks it can be erased.
Change-Id: I7c106011ffc9685eb8e5ff497919237a305e4478
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458101
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that the resume path can correctly handle the case where a namespace
was removed and a new one added with the same nsid, this no longer needs
to be asynchronous.
Change-Id: I693045e66a7d4e75255b526d8f5ca5ef8695533e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459606
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so reference
tag will have to be remapped accordingly.
This patch adds an API, spdk_dif_remap_ref_tag to satisfy the case.
UT code is added together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55cc45c475d4e86e736f5712baf02fcabfde3c82
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461104
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using stacked virtual bdev (e.g. split virtual bdev), block
address space will be remapped during I/O processing and so reference
tag will have to be remapped accordingly.
The use case is explained in detail as follows:
- Format a single NVMe SSD with DIF enabled.
- Create a NVMe bdev on the NVMe SSD with DIF enabled.
- Create four split vbdevs on the NVMe bdev.
- Add the split vbdevs to a NVMe-oF target.
- Application is aware of block address space of the split vbdevs.
- Application submits read/write I/O to the NVMe-oF target.
Case 1:
- Configure NVMe-oF target to DIF pass-through.
Case 2:
- Configure NVMe-oF target to DIF insert/strip
For the case 1,
- Application inserts DIF for write I/O and verifies DIF for read I/O.
- The split vbdevs remaps reference tags of DIF both for read and write
I/O because application expects reference tags are based on the
block address space of split vbdevs.
- The NVMe bdev processs read/write I/Os without remapping reference tags
because reference tags are already based on the block address space
of the NVMe bdev.
For the case 2,
- NVMe-oF target inserts DIF for write I/O, and verifies and strips
DIF or read I/O.
- The split vbdevs remaps reference tags of DIF both for read and write
I/O because NVMe-oF target expects reference tags are based on the
block address space of split vbdevs.
- The NVMe bdev processs read/write I/Os without remapping reference tags
because reference tags are already based on the block address space
of the NVMe bdev.
This patch adds two APIs, spdk_dif_ctx_set_remapped_init_ref_tag
and spdk_dif_remap_ref_tag to satisfy the use case.
UT code is added together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib3101129225b334d2f578eab75197790b1818770
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461103
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Length of xattr descriptor is equal to length of xattr struct,
xattr name and the len of stored value.
There is no limit to how much can be stored in memory for xattr.
On disk xattr size is limited to single page and within that to
max descriptors that can fit in it.
This size is known at compile time.
Before this patch it was possible to add xattr exceeding
what was possible to be written to disk. This caused issues
when serializing the metadata during spdk_blob_sync_md()
or spdk_blob_close(). Making those fail without specific info
to the user and not actually writting such descriptor.
Since maximum length of xattr descriptor is known at compile time,
this patch compares against this value when setting the xattr.
It will immediately report back to user with error, and will
not store xattr in memory (thus not serialize it).
This patch should not affect any backward compatibility for blobs.
Too large xattrs weren't written to disk before,
API for blobstore stays the same - only reporting ENOMEM
when it should.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f4af4d079e47f084e20d7a4969d9a78ec1f8610
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When handling the capsule command header, call spdk_nvmf_request_get_dif_ctx
by passing the NVMf request and the reference to the DIF context, and set
the flag dif_insert_or_strip of the NVMf/TCP request to true.
spdk_nvmf_request_get_dif_ctx returns false immediately when the
corresponding NVMf controller disables DIF insert/strip.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16f6b322f2692d5f9653d011a490e7929ec37365
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When the NVMf controller's flag dif_insert_or_strip is enabled, DIF is
inserted for write I/O and stripped for read I/O, and the corresponding
NVMe-oF initiator should not be aware of the DIF setting of the
backend bdev.
Hence this patch hides the DIF setting of the backend bdev
when the flag dif_insert_or_strip is enabled.
Change-Id: I3c14880c2e94cba7f76b1bca78afb36bfe884e26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The first idea was that the caller of spdk_nvmf_request_get_dif_ctx()
should check if the current transport enables DIF insert/strip before
calling spdk_nvmf_request_get_dif_ctx().
But NVMf controller knows if DIF/insert/strip is enabled now by the
previous patch. Hence spdk_nvmf_request_get_dif_ctx() checks if the NVMf
controller enables DIF insert/strip at its head.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78253d356b694800c3a9a9608514df58e0c631a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add the optimal poll group get function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia9e57c6924a6563d79269cf535814883e83698cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a helper function to get DIF context when the passed NVMf request
is for I/O queue, NVMe read, write, or compare command, and its NSID
is valid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I796c20607c7b64a8be85da5131c5ea95ffd9f8e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a helper function to get necessary DIF information and set
them into the passed DIF context and return. This function will
be called only when the specific requirement is satisfied and
the caller will be added in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic435886ca936a211f34278b813f547ffa43b9000
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Also made on the prints a DEBUG message instead and noticed the really
name that was being registered by this component so updated it to
make it look like the rest of SPDK.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I747a846cb365e7db49be50db941e83fb1b265ea0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Load reservation information based on ptpl configuration file, and
restore the information to NS data structure.
Change-Id: I5f46d49a6d1e6e49aab93ca7cd654469a3a08659
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When pdu->dif_ctx is not NULL, call spdk_dif_set_md_interleave_iovs
in nvme_tcp_build_iovs and nvme_tcp_build_payload_iovs to create
special SGL for the data segment to leave a space of metadata for
each block.
Add UT to verify if the update works correctly.
This update is very similar with the use case of
spdk_dif_set_md_interleave_iovs in iSCSI target.
Change-Id: Ie802cb4b7c541089579ecc2a630fc1e34004da55
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When DIF is inserted or stripped, nvme_tcp_pdu_set_data_buf must
shift the range of the buffer from LBA based to extended LBA based
because the extended LBA based range must be passed to create a special
temporary iovec array to leave a space of metadata for each block then.
This patch do the following:
- Add a pointer to the current DIF context to struct nvme_tcp_pdu.
This pointer is set when DIF is inserted or stripped to the current
NVMf request.
- When the pointer to the current DIF context in the PDU is set, get
the extended LBA based offset and length by calling
spdk_dif_get_range_with_md() and use them in nvme_tcp_pdu_set_data_buf().
- Original data length is set in the PDU and original data offset is
set in the current DIF context in nvme_tcp_pdu_set_data_buf().
- Add UT code.
Change-Id: Ic1f4fd326b5b3e3d4c74677592bda34d6949a11e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Compilation Warning on fedora30.
ctrlr_ut.c:1146:12: warning: Assigned value is garbage or undefined
event.raw = rsp.nvme_cpl.cdw0;
^ ~~~~~~~~~~~~~~~~~
This is related to issue #822.
Change-Id: I58be6df56d309e257105b1d3c96247665c3e31a0
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459714
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Required due to recent changes to functional code, unclear how
the UT passed without these.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3ea4401ee1842ef577793338f1567d20d73ad8bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459868
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It seems that autotest doesn't cover the function
nvme_tcp_build_sgl_request(), So add the unit test.
Change-Id: I2e243910cb38ffc49bdd6048b365dc7fa60892c2
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_jsonrpc_begin_result() will be refactored to always
return non-null in subsequent patch and those raid tests
will no longer make sense, so we remove them now.
Change-Id: Ifd4570af4daab9c96cd8701440366e292f879204
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459659
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There was no UT to process SGL for PDU, and add UT in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icd07683ba94b584cd3c6e5a88fee78d512d5832d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch adds UT code to test nvmf_tcp_send_c2h_data,
nvmf_tcp_calc_c2h_data_pdu_num, and nvmf_tcp_h2c_data_hdr_handle,
and verifies if the last changes works expectedly.
Change-Id: Idba21a4739635b7828049f1d71c3bc1595deaab0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
And also add spdk_sock_group_get_ctx function
Change-Id: I2a2a58b0588ff7d99d3538ea0a633a3b8c7a234b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Issue reports:
bdev_ut.c:1486:2: warning: Potential leak of memory pointed to by 'histogram'
poll_threads();
^~~~~~~~~~~~~~
1 warning generated.
Add Tear down the channels like other tests in this file.
Change-Id: Iaeff93ec6f17716dfb7638cf4dd5f6cfe2c2de06
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This fixes error on scan-build on Fedora 30, which assumes spdk_bdev_open()
is called from non-SPDK thread - failing before allocating spdk_bdev_desc:
bdev_ut.c:1766:17: warning: The left operand of '!=' is a garbage value
CU_ASSERT(desc != NULL);
This is related to issue #822.
Change-Id: I8ee2112bb4d71aafc93d63bddca083c009ec11f3
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Compile reports that device->map is not initialized.
In file included from rdma_ut.c:37:
/home/vagrant/spdk_repo/spdk/lib/nvmf/rdma.c:1542:44: warning: 1st function call argument is an uninitialized value
wr->sg_list[i].lkey = ((struct ibv_mr *)spdk_mem_map_translate(device->map,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/vagrant/spdk_repo/spdk/lib/nvmf/rdma.c:1545:26: warning: 1st function call argument is an uninitialized value
wr->sg_list[i].lkey = spdk_mem_map_translate(device->map,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So add this to initialize memory map.
Change-Id: Ia6f6153a1558861b4283637dac47439651b043c7
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Compilation Warning on fedora30.
bdev_raid_ut.c:659:13: warning: Array access
(via field 'base_channel') results in a null pointer dereference
CU_ASSERT(ch_ctx->base_channel[index] == g_io_output[index].ch);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
bdev_raid_ut.c:2181:14: warning: Array access
(via field 'base_channel') results in a null pointer dereference
CU_ASSERT(ch_ctx->base_channel[j] == (void *)0x1);
^~~~~~~~~~~~~~~~~~~~~~~
This is related to issue #822.
Change-Id: I9fd066b16e9f4c1fedc95403d2ac6e609f862c65
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Placement_id is related with getsockopt with the optname=
SO_INCOMING_NAPI_ID. For some testing platform, it is not
supported with this macro, so use ifdef to avoid send this
to the kernel.
Change-Id: I9e49e6e15810af0cd5085b92469c15a53ac09ada
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454468
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add file based reservation information definition, the data structure
can be used to store all the reservation information to a json
based configuration file, and enable this feature with REGISTER
command.
Change-Id: Ic93cfc5934a4ad96f11b96ec77bacb877edf6c10
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Scan-build didn't get that spdk_bs_init() assigns the blobstore to dev.bs
and there was no point at which it could fail (without *_FATAL) before checking it.
Additional assert added to make sure scan-build is aware.
lvol_ut.c:1105:27: warning: Access to field 'get_super_status' results in a dereference of a null pointer (loaded from field 'bs')
dev.bs->get_super_status = -1;
~~ ^
This is related to issue #822.
Change-Id: Id44d12ced4bc25490ca4e0949cbdfb89508a6e06
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With all the pieces in place we can finally remove
the legacy cross thread messages from vhost.
We replace spdk_vhost_allocate_reactor() with
spdk_vhost_get_poll_group(). The returned poll_group
has to be passed to spdk_vhost_session_send_event(),
where it will be assigned to the session. After the
session it started, that poll group will be used for
all the internal vhost cross-thread messaging.
Change-Id: I17f13d3cc6e2b64e4b614c3ceb1eddb31056669b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds UT code to test if the bug in nvmf_tcp_pdu_set_data_buf
is fixed by the last patch.
Change-Id: I0b504ba37652de8300c85eea2f85218c837dd503
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Define maximum port number of portal to be 32 and use fixed size string
whose size is 33 for spdk_iscsi_portal_grp::port.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fcdbd45ce000a9c1c53761195697555b8d030a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Define maximum IP address of portal to be 256 and use fixed size string
whose size is 257 for spdk_iscsi_portal_grp::host.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iceeae94e250ea426f72ff72355a213606308da51
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Maximum size of target name is already defined to be MAX_TARGET_NAME,
and hence use fixed size string whose size is MAX_TARGET_NAME + 1 for
spdk_iscsi_tgt_node::name.
Change psdk_iscsi_tgt_node::alias together.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac4cd6e9d60173ddeb68ca21ce712126c13bc3c4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Maximum size of initiator address is already defined to be
MAX_INITIATOR_ADDR, and hence use fixed size string whose size
is MAX_INITIATOR_ADDR + 1 for spdk_iscsi_initiator_mask::mask.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic39e08986c9377800ce58a1cb5b8401c6b71cf96
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Maximum size of initiator name is already defined to be
MAX_INITIATOR_NAME, and hence use fixed size string whose size
is MAX_INITIATOR_NAME + 1 for spdk_iscsi_initiator_name::name.
This will also reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic6bc172125fc6c9c0896499704d2a9b522106da0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Here is the an example to describe existing issue:
There is a Write request with 64KiB data length, and this IO is cross the IO
boundary. We assume that the parent IO will have 2 children requests, one is
33KiB length, the other one is 31KiB. Here is the view of parent iovs, the
first 33KiB length data has 33 iovs:
iov.[0].iov_length = 1024;
.
.
iov.[31].iov_length = 256;
iov.[32].iov_length = 768;
.
.
iov.[64].iov_length = 1024;
In function _spdk_bdev_io_split(), then you can see that for the 33KiB length
child request, exiting code will run out of child child_iov space and return
error due to last one data buffer is not block size aligned.
Here we can rewind the existing offset to last block size aligned buffer to
avoid the error case, for backend which need aligned data buffer such as
AIO backend, the request will go through spdk_bdev_io_get_buf() again to
do the data copy, otherwise for those backend devices such as NVMe with
hardware SGL support, 256 data segment is fine for them.
Change-Id: I96ebdf29829d86f9b38fab28a7406eedc9fa44ef
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Added check if band that is added to reloc
have any valid blocks. Return immediately
if there is no valid blocks.
Change-Id: I2bce088e0ad71479c6899fff96845397d12e2e92
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457625
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case ANM event occurs on open band there
can be situation that reloc will try to read
block on which there is ongoing write.
This is happening because lba valid map is
updated before write submission to allow sent
consistent metadata to disk before all user
writes are completed.
Added write offset to the each chunk and
add check to reloc if particular ppa is written
on that chunk.
Change-Id: Ic95a06e69381d2152a86984b65a0975afaff955d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458056
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case ANM event occurs on open band
reloc need to be able to process such
event.
If band is not in closed sate do not
alloc lba map for it and do not set
it to free state after relocation.
Change-Id: I2f4a5770fef08271d222936ca19f3cc98e5e5be1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Open bands need to have lba map segments
set to cached state to prevent read lba
map from disk during relocation events.
Change-Id: Ib4f1ed19131fad174c1d2f70e4c02e83701e2a0a
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457853
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compilation Warning on fedora30.
iscsi_ut.c:184:31: warning: The left operand of '==' is a garbage value
CU_ASSERT(rsph->status_class == ISCSI_CLASS_INITIATOR_ERROR);
~~~~~~~~~~~~~~~~~~ ^
This is related to issue #822.
Change-Id: I221aa6601bae4a2d55bd557fcd1d001fbc616149
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459723
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compilation Warning on fedora30.
dif_ut.c:151:24: warning: The left operand of '==' is a garbage value
return (iov->iov_base == iov_base && iov->iov_len == iov_len);
~~~~~~~~~~~~~ ^
This is related to issue #822.
Change-Id: Ie050c65d3747c551e2c26e84d3879742eaf86fd8
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459712
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be used to get extended LBA based range or length in NVMe/TCP
target later.
Change-Id: Id0f08bdaeea634dbc05b34a0f7914be21aef9aae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458706
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_dif_update_crc32c_stream to update CRC32C by stream fashion.
spdk_dif_update_crc32c_stream utilizes the updated _dif_update_crc32c_split.
A minor bug was found in UT for spdk_dif_update_crc32c and is fixed
together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I92358e845e8e2e17c6f288aa718b947e71e6e1fb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_update_crc32c_split will have to
process partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_update_crc32c_split had assumed that passed
block is always a complete block.
This patch exposes offset_in_block, data_len, and guard as parameters
of _dif_update_crc32c_split() and make _dif_verify_split() process
the above two types of data block properly.
The next patch will utilize the updated _dif_update_crc32c_split to
add spdk_dif_update_crc32c_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee29377ad49d4f209673fffb4de4a23a54f31766
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Like other test, need to add SPDK_CU_ASSERT_FATAL(TAILQ_EMPTY(&g_bdev_io_queue)).
To avoid issue:
scsi_bdev_ut.c:956:2: warning: Address of stack memory associated with local
variable 'task' is still referred to by the global variable 'g_io_wait_queue'
upon returning to the caller. This will be a dangling reference
ut_put_task(&task);
^~~~~~~~~~~~~~~~~~
waiting exit from while loop in ut_bdev_io_flush.
This is related to issue #822.
Change-Id: If390f5076582a0149646f0c2a408c3bcd3b4fab6
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459534
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_dif_verify_stream to verify DIF by stream fashion.
spdk_dif_verify_stream utilizes the updated _dif_verify_split.
spdk_dif_verify_stream is very similar with spdk_dif_generate_stream().
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c5d197cf4c0bbc82c8e7f4fa45ddc0b94051058
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458330
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_verify_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_verify_split had assumed that passed block
is always a complete block.
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_verify_split() and make _dif_verify_split() process the
above two types of data block properly.
The next patch will utilize the updated _dif_verify_split to
add spdk_dif_verify_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic371d3ccefbd5fe8147a948a624013be2702128e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458329
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Address translation wasn't correct for >32 bit length packed address.
This commit fixes the issue and adds a corresponding unit test.
This patch fixes issue #774:
https://github.com/spdk/spdk/issues/774
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Idce67c47f2a9888f9e2ae2eadaf71ccc34e5c260
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently we are missing cleanup routine for case when
power failure interrupts creating snapshot. This patch
add such routine.
For the case where we find blob with a parent snapshot ID
matching newly created snapshot we can finish whole process
during recovery by processing forward with setting snpashot
as read only, removing xattr and syncing. We should remove
snapshot only if there is no blob with parent pointing at
snapshot.
Fixes github issue #760
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2f0e298164e07a2b4dfa5367e8878facef640702
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is unit test for power failure event during snapshot
deletion. At the same time this is an example how to
use new power failure event functionality in unit tests.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9212392f665576fa16edd28c609199d0e02dc434
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch makes spdk_dif_set_md_interleave_iovs() and
spdk_dif_generate_stream() process unaligned start of data segment
properly by using ctx->data_offset.
Separating this patch into two may be required but this patch is
small and aggregating into a patch is good to test.
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb5250aba4e12a34102e5ce067d725c685681177
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458142
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_generate_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_generate_split() and make _dif_generate_split() process
the above two types of data block properly.
The next patch will utilize the updated _dif_generate_split in
spdk_dif_generate_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4211e65ead7fc256a40748412c670e46f83b1731
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment. spdk_dif_set_md_interleave_iovs() have allowed
reading data to have any alignment but had required data segment to
be a multiple of block size.
In other words, spdk_dif_set_md_interleave_iovs() had required that both
ctx->data_offset and (data_offset + data_len) must be a multiple of the
data block size.
This patch refines the algorithm to remove the latter requirement.
The update implies that spdk_dif_set_md_interleave_iovs support any
data buffer whose size is less than a single data block.
The update doesn't change parameters of spdk_dif_set_md_interleave_iovs
and existing UT should be passed.
This patch adds additional UT code to test these updates.
Change-Id: I88c7d2a80a8d92b54863b6ad1c3a9d2761a6195d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds mechanism to simulate power failure in
blobstore unit tests at any given moment in time.
This point in time is measured by number of IO operations
occured after triggering power failure with the number
of IO operations given as a parameter. Number of IO
operations parameter can be defined as any type IOs,
writes, reads, unmaps, writes zero or flushes.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I7be45331bb5110f6c16f01fd7c4e7984b2d1977d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This bug was found by code inspection. When PDU read restarts
after data segment, iov_offset must be reduced by data length.
However iov_offset had been reduced by buffer length by mistake.
Lack of UT code was the main reason of this bug. Hence add UT
code to test the fix of the bug together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I74f2f6ae8dca2e78a64bfdef8080c8031dfabb87
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
SQSIZE parameter validation in Connect command was broken because QID
field in qpair was used before intialization.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I8a0b359937d661df3b9888e6084e7d0b4a9056ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In a test case of op_login_session_normal_test(), it is expected that
the tag of the session has any value different from the connection but
the tag of the session was not initialized.
Fixes#826
Reported-by: lorneli <lorneli@163.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62f7a4bd301c5a74ad6ba10b1b448189f750b324
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Lorne Li <lorneli@163.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch changes the meaning of the data_len parameter of
spdk_dif_set_md_interleave_iovs from `Expected data length of the payload`
to `Expected length of the newly read data in the extended LBA payload`.
This change will align the parameters of spdk_dif_set_md_intereleave_iovs
to of spdk_dif_generate_stream.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f9c45e78be977625713acb79d2ae82d4375f419
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds the UT regarding below function
iscsi_op_login_session_normal()
It covers the target related, connection related
and session related operations.
Change-Id: I570df82df850a0b359b2d57b4e1694d8cb16de37
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DIF UT code had used numerics extensibly for complex DIF insert/strip
UTs. But numerics was error prone and difficult to follow the logic.
Hence this patch changes numerics to variables in DIF insert/strip UTs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I40cb27167c068855dc5d1eb9e0f36818d39c73fa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
data_offset to spdk_dif_generate_stream() was wrong but the function
worked as expected because the wrong data_offset was in the same
data block as the correct data_offset.
But the subsequent patches will refine spdk_dif_generate_stream()
and this bug will cause UT failure. Hence fix the bug up front.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I45f2302deaf377fda0ec5454c61fb463231a39db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Read requested range of lba map during relocation
instead whole lba map.
To read partial lba map range single move now has
three states: read, read_lba_map and write.
Free queue and write queue were merged to a single
move queue.
Change-Id: I86839f2286d42d4debf87cea40091370e5283b15
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454747
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep track of read lba map segments to avoid
unnecessary traffic in case ANM events.
Lba map is divided on 4KB segments which can
store 512 lba entries.
In case multipe read request on same segment
keep pending request list and process it in
read_lba_map() completion callback.
Change-Id: I2661bdb716ab7c975140e0b37aebcb17aa23901d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Almost all I/O callbacks in ftl utilize data in ftl_io, which is
initialized as callback argument in ftl_io_init_internal. This patch
changes the behavior to always returning the ftl_io struct in addition
to an extra opaque buffer.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I611ab1b33575f599798a2bb65c231a724c852c7f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455831
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Data block size was specified by mistake, and this patch changes
to use block size instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icfb1df40438ef82211279b0b7c79036283744361
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Keep lba map related fields in separate struct directly
in the band. Cleanup interfaces depended on ftl_md.
Lba map structure will be extended in next commit.
Change-Id: I1cfc2f2ff0c0e90bb63f39808780845673002e70
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453370
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extended ftl_band_read_lba_map() interface to provide
range of lba map to read.
Added ftl_xfer_offset_from_ppa() function for
calculating offset of read portion of lba map
based on ppa address from IO. This offset is
used for coping read lba map portion to internal
ftl buffer.
Change-Id: I1c72a18c79eda8c33cd0b20ea36a5d9521a09d06
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449435
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_SUCCESS is a remnant and all other SPDK libraries have used
just 0. So this patch removes SPDK_SUCCESS from iSCSI library and
uses 0 instead.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie33fd26238411e994ea9ea0c898da1abb502cad6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Data digest computation should take extended LBA payload but
could not do yet.
This patch adds an new API spdk_dif_update_crc32c() to compute
CRC-32C value for extended LBA payload.
In the next patch, spdk_dif_update_crc32c will be used in iSCSI
target first.
Change-Id: I327f384bb7dfd8b68279b0acec0ee78a40264a26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
we use this statement:
while (g_file->length_flushed != buf_length) {} in
file_length function.
It means that in this test case, length_flushed are
accessed by two different threads, so better to
use another new variable length_flused with volatile
before the variable definition. Then our ut will not hang.
Change-Id: I6152a4ba3f27f0fad1c8c2baa71324a36a2fb9e8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456580
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no need to set this every time we allocate
a request.
While here, fix a typo near where we needed to modify
the unit test to remove the qpair assertion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8af41a6c483415950f625d1ed2ef46088b75a622
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vring notification mechanism is transport-specific. At present, vhost
dataplane code in `lib/vhost/vhost.c` triggers guest notifications with
`eventfd_write()` system call. But this is an AF_UNIX specific
notification mechanism. This patch replaces `eventfd_write()` with the
existing generic `rte_vhost_vring_call()` function that is part of
DPDK's librte_vhost public API.
`rte_vhost_vring_call()` takes a vring_idx as an argument to associate
the `struct spdk_vhost_virtqueue` instance with the relevant `struct
vhost_virtqueue` instance. We introduce a new `vring_idx` field in
`struct spdk_vhost_virtqueue` to enable this association. This field is
initialized in `start_device()`. In addition, a stub for
`rte_vhost_vring_call()` is added in the vhost unit test file.
SPDK's internal `rte_vhost` copy will not be updated in order to support
the virtio-vhost-user transport. However, an `rte_vhost_vring_call()`
function is introduced in SPDK's `rte_vhost` in order to have a solid
API. This function is just a wrapper of `eventfd_write()`.
Change-Id: Ic93e25cd3f06e92f04766521bc850f1ee80b8ec8
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Keep an array of iovecs tied to each IO. Internal IOs can have
iov_cnt > 1 without having to allocate additional memory. User's iovec
can now be modified too (e.g. when splitting the request).
Change-Id: Iec73c6dad59acdc331a1461fd7feac085138a8de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There's no point in synchronously returning an error from ftl_io_write
/ ftl_io_read as they're also reported in the IO's completion callback.
All errors are now reported through io->status.
Change-Id: I4adf4e13221b63715625276042e1172cd63b8f9b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455521
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
