Docs explaining how to use the RPC are in the next patch in the
series.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7dab8fdbeb90cdfde8b3e916ed6d19930ad36e66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12848
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This just verifies a modest setup.sh's output which is of little
relevance. On top of that, depending on the system's state, the
test itself may be flaky so get rid of it.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Icc918a0dbbb54067c281aa465a097c4e40a32e11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13827
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In some occasions the total number of available hugepages increases
by the account of reserved and/or surplus hugepages allocated by the
kernel. This affects the test where it ends up with bigger number of
hugepages then actually requested via setup.sh.
Hugepages overcommitting is disabled under CI nodes, however, this
issue spontaneously appears regardless. To rectify, add the extra
hugepages while checking the expected number + some debug to see the
state of meminfo in case the test still fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If30a422240045ac188a9175eeab7210351eb34a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By the default value, timeout might be too long to detect connection
failure by the end of the test. 512 milliseconds is too small to use
in production but is not so small for this case.
Fixes#2595
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9f1248b2812eb7625aa943878b022f0a151d4cbb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13908
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's not needed. $bdevperf_pid is expanded when the trap is signalled,
hence it will always hold PID of the last value it got assigned to.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I89083667e0be5f3f0b0fd1745bfbfb38cb340c42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13922
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The contents of this file is not evaluated in any way, the test only
reads it back to stdout at different stages. Instead, just keep
bdevperf writing to std{out,err}.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ibd0caa101e895661224f8a969395eb018ece19dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
submit_inflight_desc() actually do some meaningful work, so when it really process tasks, the poller should return BUSY status.
Signed-off-by: YafeiWangAlice <yafei.wang@samsung.com>
Change-Id: I2103cea6d28e8b355dad4ddd603d917f10e44c08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13486
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I23b206b026dec0cb9e91226aa2ee2de91eebde6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0a9cd41f754f2d52a8caa936a7a7504b0091790d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13903
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There may be for_each operations outstanding on an
io_device when it is unregistered. Currently we just
return when this happens, not unregistering the
device but also not notifying the caller that this
happened (since it returns void, and the callback
function doesn't have a status parameter either).
We could just push this responsibility to the caller,
to never unregister an io_device if it knows it has
outstanding for_each calls waiting to complete. But
I think we can simplify this a lot by just handling
this inside of the thread library. Mark that the
device is pending registration, and unregister it
(on the original requesting thread!) when the
for_each count gets back to zero. Also don't
allow any new for_each operations either.
Note this requires a bit of refactoring on the
thread unit tests, since it is now possible to
unregister a device with outstanding for_each
operations.
Fixes issue #2631.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I978f2d99a25e65d2b7d71ce9b1926a79a6c94263
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13890
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If spdk_for_each_channel is called on a device that doesn't
exist, we need to set a non-zero status (-ENODEV in this
case) to the completion function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I898ad5ea499fb6087338b621b2befcadd6a05414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13889
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This would allow for better control through the environment which
could be used by the CI.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Iaf94c82ccd7ce6851abb1ad4b7ebf76d686e3608
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13898
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_top can't collect the right poller count when thread count is more than core count. Max index of g_threads_info[] should be thread count NOT cores count.
Signed-off-by: YafeiWangAlice <yafei.wang@samsung.com>
Change-Id: Iff95fb1aa7f84626a559741ad135a2cbeed04f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13574
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Here "-m " is not used or related.
so remove it.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic8700bd0a262bb70b6116bbee86330eece5c03b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13879
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This follows e380263ba1 - all CI nodes have been updated to an image
which ships with that particular version of vfio-user QEMU.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I2029f48014868366881790a4e258190e3f83b0d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13894
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
accel_perf and bdev_svc were not on the list.
Fixes issue #2483.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f758c1871f42c10e2c92b2fb6cd676830a1b3a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13877
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This has been implicitly required before, and all
in-tree apps (except accel_perf) set it, so let's
explicitly require it. This name gets used for
things like the shm name for spdk trace event file.
While here, add the name for accel_perf.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I47a22466550d4b31bacafee58d30339b4f22f4b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13876
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When decoupling a snapshot from its parent, we need to clear its parent.
So we should remove the xattr BLOB_SNAPSHOT. Modifying the xattrs of a blob
only works if its metadata are not in read-only mode.
By default, a snapshot is in read-only mode so this operation fails. When we
later want to delete the snapshot, we will see that it has a parent, so we will
try to remove the snapshot from its parent's clones list. This will cause a
crash.
The fix is to remove the BLOB_SNAPSHOT xattr only after setting the snapshot's
metadata in rw mode.
Signed-off-by: Alex Michon <amichon@kalrayinc.com>
Change-Id: I80efa6dd3dcb38b4c738ce2e97aa2ffc281cefa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13723
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
DPDK may use this NULL pointer to access its member,
And then got segmentation fault. But we only need it
exit or report normal error.
To minimize the impact, and to prevent these going on,
we add check the error return for creating NULL mempool
in spdk_thread_lib_init_ext in spdk_reactors_init.
when error returning from spdk_thread_lib_init_ext in spdk_reactors_init.
It contains thread_lib_init which reports error for failed mempool.
Thus, codes will return and will not cause segmentation fault.
Fixes issue #2620.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I63369fdaeb231196e8f8daa826eb5b057ed829b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13842
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Here should return -ENOMEM, and other places are
changed.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Id81cd7485733e66d996b1501061a45f774f2b51a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Older compilers (e.g. 7.5 on ubuntu1804) are having issues under
v1.16 due to:
plugins/intel/intel-nvme.c:666:47: error: initializer element is not constant
static const int LATENCY_STATS_V4_BASE_VAL = (
Makefile:108: recipe for target 'plugins/intel/intel-nvme.o' failed
This was fixed by the following commit which is present in the v2.0
release:
e7309044f3
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I7ebcf1b1fdb44500a21bcf3feceb07a722e8fc30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The reconnect timeout test case expects a socket READ error
to trigger the reconnect poller in bdev_nvme module, but
we use the `verify` IO workload to send IO requests which
may cause the client doesn't receive any error, because
it will send WRITE commands first.
Fix issue #2595.
Change-Id: Ibc6b534d157552cdb2b55a03c869e254ec4c462e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
the sizeof(g_vals) should be the num of array, not the num of bytes. see follow:
CU_ASSERT(spdk_json_parse(g_buf, sizeof(in) - 1, g_vals, sizeof(g_vals), &g_end, flags | SPDK_JSON_PARSE_FLAG_DECODE_IN_PLACE) == num_vals);
Fixes#2623
Signed-off-by: tongkunkun <tongkunkun_yewu@cmss.chinamobile.com>
Change-Id: I3b7994606284fe3464650337ecb0f723a627f7aa
Reported-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13841
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Parameter `num_queues` for virtio_scsi PCI device means
maximum number of queues, it SHOULD include the `eventq`
and `controlq`, while for `vhost_user` RPC call, it means
the number of IO queues, so here we use it as `max_queues`
in lib/virtio and add the fixed number queues for `vhost_user`
SCSI device.
Also fix `vhost_fuzz` to get `num_queues` earlier than
negotiate the feature bits.
Change-Id: I41b3da5e4b4dc37127befd414226ea6eafcd9ad0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
VHOST_USER_F_PROTOCOL_FEATURES is used for `vhost_user` transport,
so unmask it for PCI devices.
Change-Id: If84d6c0ee7558886f14647dad07e41530e306206
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13790
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The `vhost_user` socket transport APIs are already in the
same source file, so just call the function directly.
No code logic changes in this commit.
Change-Id: If471b9b0166d43591fb8614e95a17473c964e87c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Similar with NVMe device driver, here `virtio` is a specification
abstraction library, `pci` and `vhost_user` are transports layer,
here we merge vhost_user.c and virtio_user.c into one new source
file `virtio_vhost_user.c` so that to make code more clear.
No logic change, just code movement in this commit.
Change-Id: I8e3e5c477e7c45e6eeebad240b8cc3c9476b86d1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13788
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
While running into this function, even the subsystem can't be
destroyed due to error subsystem state, it's better to continue
the execution.
Continue to fix#2590, QEMU is stuck for the failure case, and
nvmf target should process such error because it may support other
normal subsystems at the same time.
Change-Id: Ib05e24996378b52070d2b760519f476f9b2d7e76
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The RPC provides a list of initialized engine names along with
that engine's supported operations.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I59f9e5cb7aa51a6193f0bd2ec31e543a56c12f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13745
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In prep for upcoming patch that will provide an RPC to override
and automatic assignment of an op code to an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I17d4b962fb376a77f97ce051a513679d0fba698e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12829
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK has no control over how the interrupts work in the network stack.
SPDK can only group connections together based on their NAPI ID. So
remove this check from our tests. It's only going to result in
intermittent CI failures.
Change-Id: If8e6214b7d6c5aa4df99101612b98aa43d45b459
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are only called back-to-back and they're both configuring the
driver.
Change-Id: Icc07df1cf23d67954ac3621647b050d4c8c74e64
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
scope
Some of these names were hard to tell if they were common utilities or
ADQ test functions. Clarify the names.
Change-Id: If6998c3ea996ad6fef0a87a33c90d665c9accaa8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
fix: If the first six characters of two scsi lun's name are the same,
such as aaaaaa0 and aaaaaa1, so do theirs naa identifier
Signed-off-by: Bin Yang <bin.yang@jaguarmicro.com>
Change-Id: I4e0541b372a0e20e95e0a24d62dd3d85b7abe230
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13824
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also display the log when error happens.
Change-Id: I09040a2fee2379e7506701c7cb558f0d26a5de65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13805
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
