Update PCM binary paths and executable names are these have
changed some time ago.
Update README.md with an explanation about int variables
for "pcm_settings" option.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8270766ff2c429623a29e4c12427a3dd7e45f229
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
If SIGTERM does not work - use SIGKILL and clean up
any remaining socket files.
Change-Id: I1a4f2e49a8a43f3eed19e09e16d4ee3420cd31f7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
"num_jobs" is described as required parameter in README.md
but not included in example configuration file.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1077d027d6c7dbee49afa1df4345b4dd478b5ad6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13615
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
SPDK_TRACE_REGISTER_FN(nvmf_trace), the parameters have changed.
"cmid: ", it only appeared in very early versions.
RDMA_REQUEST_STATE_TRANSFER_PENDING_HOST_TO_CONTROLLER is also changed.
Change-Id: I97b1e76e6cfc05bf4310a8571d3d1b5f0403888a
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Use waitforserial_disconnect to wait for all nvme disconnect operations
to actually finish.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I91f410d9a84db33cf5d8e9d7ecdd4e7a7003aae0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Before this change, a negative `--shm-id` value is rejected by
`spdk_app_parse_args()` and this function simply errors out after
detecting it. However, `build_eal_cmdline()` has a dedicated branch
checking for a negative `opts->shm_id` and passes `--no-shconf` down
to DPDK as a parameter, so we cannot disable the shared config support
in DPDK.
After this change, a negative value `--shm-id` is accepted, but if it
cannot be parsed as an integer, `spdk_app_parse_args()` errors
out as before. In result we can disable shared config support in DPDK
by passing `--shm-id=-1` to SPDK application.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Change-Id: Ibe089f13638eefa9ac28c5c99e303bcc3102f307
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These checked parameters are necessary themselves even for single path
configuration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie1eb2f51eeec1dbc634c6bae462a41d4c209d6ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Community-CI: Mellanox Build Bot
Clean up the code by using a custom decoder. Use multipath mode to
follow doc/nvme_multipath.doc.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie1f4109dae3a2929dcf933939a9c1b67bece0caf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12051
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Previously, reset just set a long timer to wait until all inflight
I/Os complete.
As already noted as a TODO item, check if any I/O is still inflight
before completing the reset by using a new API
spdk_bdev_get_current_qd().
The RBD bdev module can count outstanding I/Os itself but is not
efficient.
Signed-off-by: liu-darong <liu.darong@xsky.com>
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iecaf90b06cae8e21198ec3822b978b54f5404d2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
The generic bdev layer has a public API spdk_bdev_get_qd() but its
value is the most recently measured value and it requires qd sampling
to be enabled. We will have bdev modules to want to wait until
all bdev_ios are aborted by a reset. Unfortunately, spdk_bdev_get_qd()
is not suitable for the custom bdev module. Furthermore,
spdk_bdev_channel::io_outstanding is not accessible from bdev modules.
Hence, add a new public API spdk_bdev_get_current_qd().
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ica30a8d8fe3264e28f0772a39bdf5f9ba72933e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12791
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Some use cases want to abort every bdev_io submitted to the bdev by
traversing the bdev channels.
However, struct spdk_bdev_channel is private in lib/bdev/bdev.c.
Hence, add a helper function spdk_bdev_for_each_bdev_io() to execute
the function on the appropriate thread for every bdev_io submitted
to the bdev.
This function should be used only from the bdev module and it should
be ensured that the bdev is not unregistered during execution.
We keep this function as generic as possible because we may have
other use cases in future.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0209361bd1228ea8d4cb3241d0df07106be58d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12751
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When user specifies SPDK LTO build, pass the
associated option to the DPDK build to enable
LTO there as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5996ae0668ad00c52fcaeb28db055af8dc85a8ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14389
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
This is known as a false positive of GCC12.
For present, we can avoid it using Wno-array-bounds
to go on.
fixes issue #2668.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I99551348c33292fc2352a570d88f706661c8b9b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14281
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since commit: eaebf84102
rpc_py is defined in autotest_common.sh.
To avoid overriding the variable, move its declaration
below source commands.
Change-Id: I4f4e59120d4202c00a9fd2c685f3bf4febae48a5
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Former code, there're many repeated defines. And some add
asserts checking valid event and some don't add. To get the right
reports from debugging mode and catch the errors, so encapsulate
a common function to do these. And add assert in this function.
This will help get the right failure point.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I23d71eac6652c4104ceff80419f39634ac5ce395
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14335
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to have a bigger picture on the state of the
system (especially the phy nodes) when the autotest suite fails.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ib6e0b740b616284bda48ed82d92ac32236acaa3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When /bin/sh is dash (such as on Ubuntu), the build now fails with:
/bin/sh: 2: Syntax error: Missing '))'
Avoid this problem by adding a space between the opening brackets.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I420788bcfaacfafc5f060fb56866edcfe2a0f1a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14392
Reviewed-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We already define a convenient variable for the admin CQ: use it.
Suggested-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: If6570f30844a52113633bdb5f3543eec700f05d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14391
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SSL_CTX isn't created in accept(), but when a socket on which accept()
is called is created, so it shouldn't be freed when accept() fails, as
this makes the socket unusable (any subsequent operations using SSL_CTX
would be using freed memory).
This caused the segfaults reported in issue #2681, where the second
connection would crash the application.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1a01a748c5a34ce3dd0fd3c557b860c0ff314b85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14355
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Bumped up the priority of the posix and uring sock implementations to
make sure they are selected before SSL, when no impl is explicitly
specified.
Fixes#2681
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic8e1e2e13f7bce7ccd746f66087e348677df28d9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14354
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
In order to fit inside the maximum memory usage limit, recovery needs
to be split into multiple parts. During each iteration, part of L2P needs
to be read, modified as necessary and saved back to the cache.
This patch introduces the load/save steps, initialization of seq_id array
and valid map recovery. The actual L2P recovery is done in the followup patch.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I8ceadc5ef280542a173d83b932a983d5d86604a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13371
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds recovery of open bands from P2L metadata region. Recovers the
commited P2Ls and write pointers for them.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I943c53f55e653dd075035cef7ddba448c990be87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13370
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Recovers the open/close/free state of bands after shutdown, initializing
necessary lists.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4a6bd4ed1013ce8d04f44d1772dcd1f0e4e365bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since base device doesn't require VSS, FTL introduces a mechanism that
will allow for recovering both the P2L and write pointer of open bands
after a dirty shutdown. After writing 1MiB of data to a band, a 4KiB
block describing the P2L will be persisted to cache device, effectively
emulating VSS for the base device.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ic6be52dc09b237297a5cda3e752d6c038e98b70e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13367
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Track the relative sequence of opening and closing bands and chunks.
Necessary for detecting the most recent user data during dirty shutdown recovery.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I682030e58284d7b090667e4e5a9f4bbc7615708a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rpc_cmd function does not tolerate piping arguments into it,
so code execution skips the parts responsible for generating
a return code. The code is equal to nothing or "", which then
is compared with a value, ultimately erroring out the whole test.
To avoid these problems restore rpc_py varible declaration
in multiconnection.sh and ext4test.sh scripts.
Additionally added a comment in compress.sh to match ext4test.sh
and multiconnection.sh.
Change-Id: I4fb5f737d4e97d602f522b810363bc0d4522bf0d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
hexlify and unhexlify utils from vbdev_crypto.h have been moved so that
they could be included and reused outside of vbdev_crypto module.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: Ia074250176907f4803b84024239ecd4e9d8a5fc1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
`v2c` helper function returns -1 on error, hovewer its return type was
char - which may cause an overflow situation on architectures where char
is interpreted as unsigned char, which was reported by the CI.
The return type has been changed to signed char.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: I84f5784b2de7d681f78c69b5f3646e851e8dee88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Use posix sockets by default when running tests.
For now we only want to test with this socket type
and ssl socket support may be added later if needed.
Change-Id: If8b125518cf1c01a841276b58fa7ca7799aeb229
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The word engine was both used (interchangeably with module) to refer to
the things that plug into the framework and to the framework itself.
This patch eliminates all use of the word engine that meant the
framework. It leaves uses of the word that meant "module".
Change-Id: I6b9b50e2f045ac39f2a74d0152ee8d6269be4bd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
spdk_accel_module_finish
Also move it into the internal header that defines the interface used by
modules.
Change-Id: I3aeb41e643f27a69556099cb8d166f64c9e5d67f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
For non-fabric controllers, the corresponding I/O qpairs are simply
re-enabled at controller reset.
This had a issue when I/O qpairs span multiple threads and poll group
is used.
spdk_nvme_ctrlr_reconnect_poll_async() calls
nvme_transport_ctrlr_connect_qpair() with qpair->async being false.
Then nvme_transport_ctrlr_connect_qpair() calls
spdk_nvme_poll_group_process_completions() until the qpair is connected.
spdk_nvme_poll_group_process_completions() may poll other qpairs.
This may cause I/O to complete on a wrong thread.
For PCIe controller, spdk_nvme_poll_group_process_completions() calls
spdk_nvme_qpair_process_completions() simply for each qpair.
Hence change nvme_transport_ctrlr_connect_qpair() to call
spdk_nvme_qpair_process_completions() if the controller is non-fabrics.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ieb270c2fb154124021ef6d25577b817d05e5ca9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14295
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Writing to unallocated cluster triggers copy-on-write sequence. If
this cluster is backed by zeroes device we can skip the copy part. For
a simple thin provisioned volume copy this shortcut is already
implemented because `blob->parent_id == SPDK_BLOBID_INVALID`. But this
will not work for thin provisioned volumes created from snapshot. In
this case we need to traverse the whole stack of underlying
`spdk_bs_dev` devices for specific cluster to check if it is zeroes
backed.
This patch adds `is_zeroes` operation to `spdk_bs_dev`. For zeroes
device it always returns 'true', for real bdev (`blob_bs_dev`) always
returns false, for another layer of `blob_bs_dev` does lba conversion
and forwards to backing device.
In blobstore's cluster copy flow we check if cluster is backed by
zeroes device and skip copy part if it is.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I640773ac78f8f466b96e96a34c3a6c3c91f87dab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There's no reason for this parameter to be non-const and it makes this
functions pain to use when you want to hardcode a specific sock
implementation.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifed4426a02ab54cbd51c8a2051b1eac010f86db9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If initiator and target run on the same application, and initiator
uses SRQ, target may get async events for initiator, e.g.,
IBV_EVENT_QP_LAST_WQE_REACHED unexpectedly.
The reason is initiator and target may use the same device
simultaneously and only target polls async events.
Target sets attr.qp_context to rqpair when creating QP, but initiator
sets attr.qp_context to NULL when creating QP.
Hence one simple fix is to ignore async events whose qp_context is
NULL.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Id9ead1934f0b2ad1e18b174d2df2f1bf9853f7e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14297
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
By the previous patches, a qpair is destroyed after it is actually
disconnected.
But after the qpair is destroyed, it is checked if drained by using
rqpair->current_num_sends and rqpair->current_num_recvs.
However, if the qpair is the last of a poller of a poll group,
CQ is destroyed before checking if the qpair is drained.
If CQ is destroyed, at least rqpair->current_num_recvs is not updated,
and we may get one second timeout.
This should be avoided.
Hence, destroy the qpair after it is disconnected and drained.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ibd6c83e8a3e7b6e11e9b45cee42669da6d42a621
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14278
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If the being disconnected qpair is the last of a poller of a poll group,
CQ is destroyed and the poller is released before the qpair is actually
disconnected.
This patch destroy CQ and release the poller after the qpair is actually
disconnected.
One exception is when spdk_nvme_ctrlr_free_io_qpair() is called to a
connected qpair. In this case, the qpair is removed from a poll group
before the qpair is actually disconnected. In this case, destroy CQ and
release the poller when the qpair is removed from the poll group.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Idf266bbb6dbb40f04ae6313db724fabf80865763
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We have two cases to call nvme_rdma_poll_group_put_poller().
For consistency, make the two cases the same sequence.
This will make the next patch easier. The next patch will release
poller from poll group when qpair is actually disconnected as
possible as we can.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4178113d5277240e287e83a57e97cf32fd0f7457
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14252
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Additional tests testing clean shutdown/startup capability (both fast
and slow shutdown paths). Additionally FIO tests can now run on the same
FTL instance, instead of creating a new one for each test.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I20cbd2fe0303b3e75bf7efca1623e223e2611f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13365
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds ability for FTL to startup after clean shutdown.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I2f1b83bb3eb1487b6665c95e76c48881e8899b16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds additional debugging functionality - ability to check the validity
of all L2P entries and valid map to check for inconsistencies after FTL
startup. Since this is a very time consuming process, it's controlled by
an environment variable and not executed during normal operations.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4766a1576c058f69fa047f45d2d8be6d0ad0b3cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds necessary functions for setting up the state of FTL components
based on loaded in metadata.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I3a4c05230c877850e61d4f31d495d38121d27b3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13362
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
