Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using new_id attribute is global in scope, meaning that depending
on the kernel's setup seen prior running setup.sh, single write
to it may re-bind ALL matching devices. This doesn't play well
with our PCI_{ALLOWED,BLOCKED} options as they can't be enforced
in such a case. Consider the following example:
> modprobe -r nvme # all nvme ctrls are detached from the kernel
> echo 0xdead 0xbeef >/sys/bus/pci/drivers/uio_pci_generic/new_id
# setup.sh-wise
> modprobe -r nvme
> PCI_BLOCKED=some:dead:beef.bdf setup.sh
# PCI_BLOCKED device still ends up bound to userspace driver.
After this single write, ALL matching devices will end up bound to
uio_pci_generic. To avoid this, we should override preferred driver
on per-bdf basis.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: Ic4613e33321303b92b47ce3f4d7e1f29ecca3036
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
recently introduced: 0af934b38c
by default disallows multiple SPDK applications
from running on overlapping CPU masks.
This test was overlooked during initial adjustment
of CPU masks in our scripts. This patch aims to remedy
that issue.
Change-Id: I7e4a7f6a53119a97a138b191e4511d94c351ff9b
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As we are using spdk-abi repo to compare SO files, we do not
need newer images to prepare serialized spdk releases inside VM.
For release tests (22.01, 22.09), let's use the older images,
e.g. Fedora 35
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: Ief8f2b1a25e642f3cbe9e3038ba39e634cbf0c5e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is in prep for adding a new compressDev accel_fw
module that will contain all of the DPDK compressDev specifics
on it, the vbdev will make calls to the accel_fw instead.
As the accel_fw has SW based compression, we want the configure
option to apply to building the vbdev module but not the accel_sw
software implementation or the upcoming compressdev module.
Renamed to "compress" as reduce is a term specific to the vbdev
implementation of the compression to be provided by the accel_fw
and thus the same reason why we leave the test flag called REDUCE
because it's controlling tests for the reduce library as well as
the vbdev module that is using reduce. The flag does not apply
to the SW implementation of compression.
This does not affect upcoming accel_fw compressdev module, that
will have its own configure option.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If8ed3e48e1e3dabcaad1cd161289e78122cd9d58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In the following patches, nvme_rdma_poll_group_set_cq() will
touch not only CQ but also SRQ and receive WR objects.
All these resources are of a poller.
Hence for clarification, rename nvme_rdma_poll_group_set_cq()
by nvme_rdma_qpair_set_poller().
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic59ba5a45833e39b1b2647c000c8b953f1031d6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In the following patches, poll group will have rsps objects and to share
the code between poll group and qpair, option for creation will be used.
As a preparation, merge nvme_rdma_alloc_rsps() and
nvme_rdma_register_rsps() into nvme_rdma_create_rsps(). For consistency,
merge nvme_rdma_alloc_reqs() and nvme_rdma_register_reqs() into
nvme_rdma_create_reqs().
Update unit tests accordingly.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I92ec9e642043da601b38b890089eaa96c3ad870a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When SRQ is supported, recv objects will be allocated by poll group
and qpair will associated and use them. In this case, we do not want
qpair to allocate and free recv objects. When connection is established,
it will be decided if SRQ is used or not. Hence, defer recv objects
allocation until connection is established.
Send objects are not affected directly by SRQ, but
nvme_rdma_register_reqs() no longer does any registration and deferring
send objects allocation makes the code more consistent. Hence, defer
send objects allocation until connection is established too.
Even after this patch, we rely on nvme_rdma_ctrlr_delete_io_qpair()
to free resources completely.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Signed-off-by: Denis Nagorny <denisn@nvidia.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ic151fad01009d92a7fc809a730e6e9dff1a365f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
When use of deprecated featues is encountered, SPDK now calls
SPDK_LOG_DEPRECATED(). This logs the use of deprecated functionality in
a consistent way, making it easy to add further instrumentation to catch
code paths that trigger deprecated behavior.
Change-Id: Idfd33ade171307e5e8235a7aa0d969dc5d93e33d
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15689
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
autofuzz_vhost.sh doesn't get run in per-patch tests, so this
was missed when the CPU lock file code was under review.
Fixes: 0af934b ("event: add CPU lock files")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I733cec50ed27630843ca330db283ceabb9e308a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jaroslaw Chachulski <jaroslawx.chachulski@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This exercises the parts of spdk_spin_*() that are difficult to test in
unit tests. In particular, it tests multiple SPDK threads running on
different pthreads contending for a lock and it tests pollers and
messages going off CPU with a lock held.
Change-Id: I5cd6ce29c92c44ba63f47332fe339e59eed81553
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
This introduces an enhanced spinlock that adds safeguards compared to
the default pthread_spinlock_t. In particular:
- A pthread_spinlock_t is still used, but additional error checking is
performed to ensure there is no undefined behavior on relock,
unlocking when not the owner, or destoying a locked lock.
- The SPDK concurrency model allows an SPDK thread to be migrated
between pthreads. Releasing a pthread spinlock on a different thread
from where it is taken is undefined behavior. If an SPDK spinlock is
held at a time that a time when a poller or message returns control to
thread_poll(), the program will abort.
- SPDK spinlocks can only be obtained from an SPDK thread.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6dd6493ab5f5532ae69e20654546405a507eb594
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The check if $id is a block device was being performed on the host's
side instead of the VM's. Replace that with a string matching the
target device on the VM.
Fixes issue #2810
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I964bb24eeea2fc5a4c2eacbbf6c97606303b2ebd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15762
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It looks like fedora intentionally sets $DEBUGINFOD_URLS inside the
environment as per the contents of /etc/debuginfod/. When set,
valgrind uses this URL list to fetch extra debuginfo from the target
servers. This is an unwanted behavior, since depending on the net
state it may block the tests leading to job timeouts under CI.
To mitigate, unset all DEBUGINFOD_* vars while running valgrind. Also,
enable verbose output to make sure we are aware what valgrind is
actually doing under the hood (e.g. info about fetching debuginfo
could not be seen without it).
Fixes issue #2767
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If7c3bf341bd78c1cb9a68c5f86379fd7d3682f4e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15774
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_tcp_read_pdu in a loop
nvme_tcp_read_pdu itself has a loop in it that runs until no more data
is available, so the extra loop does nothing.
Change-Id: I1471018e396c43187d1f06bd18ce8a6846a71c94
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15139
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Starting with DPDK 22.11 the struct rte_cryptodev_sym_session
is no longer part of public API. Instead the void * is used.
There is no need for SPDK to track the type of session variable,
so replace that with void * regardless of DPDK version.
Change-Id: I29f82e87a593dd1886673fe2a56145da2dbe8354
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15433
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The source and destination of memcpy() overlap, which is
contained within spdk_copy_buf_to_iovs()
Signed-off-by: Xin Yang <xin.yang@arm.com>
Change-Id: I55d90a52384bb9a262e71618d0900776f6eb95ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15720
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no reason to exclude include/ directory from coverage reports
and it can actually be useful to gauge test coverage for functions
defined in the headers.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I3efa5158e865fd26e7b5f6d7e3a83ca160ea0bfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15633
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add rpc method trace_get_info to show name of shared memory file,
list of the available trace point groups and mask of the available trace points for each group.
Fixes#2747
Signed-off-by: Xinrui Mao <xinrui.mao@intel.com>
Change-Id: I2098283bed454dc46644fd2ca1b9568ab2aea81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
All the other spdk_sock_* functions return -1 and set errno
appropriately, so we should do the same in flush().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I51cda2c51974c72e82531f06fa31ab89b2329c91
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Optimal I/O boundary causes I/O to be split in the nvme driver. This is
a problem for writes if write_unit_size > 1 because the split I/O may
not match the write_unit_size.
Fixes: #2791
Change-Id: I437e6cb6d8e2415658d5b46539feeacb5363fd46
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
NVMf target reports copy command support if all bdevs in the subsystem
support copy IO type. Maximum copy size is reported for each namespace
independently in namespace identify data. For now we support just one
source range.
Note, that command support in the controller is initialized once on
controller create. If another namespace which doesn't support copy
command is added to the subsystem later, it will not be reflected in
the controller data structure and will not be communicated to the
initiator. Attempt to execute copy command on such namespace will
fail. This issue is not specific to copy command and applies also to
write zeroes and unmap (dataset management) commands.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I5f06564eb43d66d2852bf7eeda8b17830c53c9bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Fixes#2781
This patch fixes two issue causing segfault on r2t:
1. pdu buffer is allocated from immediate_data_pool, but data_buf_len is set as data_out_pool
2. task->desired_data_transfer_length is rewrite by iscsi_send_r2t, which causes a wrong calculated pdu->data_buf_len
Signed-off-by: melon.masou <melon.masou@outlook.com>
Change-Id: I151859afff7104f29ad7f0ec57a8479d88b742bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added new API 'spdk_bdev_histogram_get_channel' to get histogram of
a specified channel for a bdev. A callback function is passed to it
to process the histogram.
Change-Id: If5d56cbb5fe6c39cda7882f887dcc9c6afa769ac
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
They were missed by the initial set of patches which introduced this
header as a mandatory one across different types of files.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I3f9b37d41298c843e1648e72fe8593768ccd37e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)
For intel copyrights added, --follow and -C95% were used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2ef86976095b88a9bf5b1003e59f3943cd6bbe4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
initialize_buffer() uses memset() with a static pattern
that won't be able to detect issues such as writing/reading
only the first iov entry.
This commit adds counter at the beginning of every block
to help detect such errors.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I6c497c707c8ae6a279c0222fdd4a1cf398c3b34c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15582
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the string value instead of int in raid_bdev json info.
Rename raid_bdev_parse_raid_level() to match raid_bdev_str_to_state().
Change-Id: I135269fe6de0746e661828cb1d36514b082011bd
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Compression and decompression both start with an uncompressed file,
provided using the new -l command line option. The file is then
compressed in chunks according to the specified block size. Each
operation works on one chunk.
Change-Id: Ia7d3853627d938f73e6aa3ee09fccd11d9bca706
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Paul Luse <paul.e.luser@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use 'direct' option for writing into network block device
and sync once after writing is complete.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib671a0562cdecfa5f89b41ff6226dd81709c6a3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15526
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1GB I/O is to enough to perform the test and saves
time in test execution.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4845d114d835b86dfc47051a97825d8cc1dc3d07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Use spdk_dd instead of plain dd to reduce test
execution time.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I54979b68b3c328aa9618e704e2bc55e794aa232c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reduce maximum number of queues when connecting with
ConnectX-5 NICs. When using host systems with nproc > 64
connecting with default options and creating all IO queues
takes too much time and results in keep-alive timeout.
Change-Id: I3b3a000fad3a69d4ce5657df494245be2b2a0a81
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Change-Id: I64473e4904c82fa06d41e8a02d56070ebf966adc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
The long time fuzz output size is so big that
cause Jenkins job abort.
Signed-off-by: Jun Wen <junx.wen@intel.com>
Change-Id: I5deeb1ff7414e2bf01cd3b5200e8c51d40487ad8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <qun.wan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Added io_outstanding in struct nvme_io_path to record outstanding
I/O number in each path, which will be used by multipath to select
I/O path.
io_outstanding gets updated for I/O sent to a namespace and not get
updated if sent to a controller.
For FLUSH case, it calls bdev_nvme_io_complete() directly and
io_outstanding is not updated for this case.
spdk_bdev_io_get_buf() is executed in the generic bdev layer.
Hence, we do not update io_outstanding for spdk_bdev_io_get_buf().
Change-Id: I47b515e0f254e5daa7e1e88799a832032b23ff34
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
SPDK threads generally run on dedicated cores and locks should be rarely
contended. Thus, putting a thread to sleep while waiting on a mutex does
not free up CPU cycles for other pthreads or processes. Even when
running in interrupt mode, lock contention should be low enough that
spinlocks are a net win by avoiding context switches.
Signed-off-by: Mike Gerdts <mgerdts@nvidia.com>
Change-Id: I6e2e78b2835bbadb56bbec34918d998d75280dfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also add unit tests that explicitly test this
condition. They fail without the nvme driver changes
in this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa369be341eb4eba394f248990e56dce001d3940
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15579
Reviewed-by: Mariusz Barczak <mariusz.barczak@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Right now for ABI tests, the abidiff tool requires
a reference .so files matching the SPDK version that
is being compared to. For example patches on master
are compared to .so files build from last SPDK release.
This requires continuous maintenance and backports
to the prior release branches, to keep new VM images
buildable.
Since ABI tests should be done only against specific
release (git tags) rather than tip of the branches,
this would mean to address it properly the VM image
and point releases would need to be synchronized.
To avoid that, we can switch from using the .so files
to their text (XML) representation generated at the
time of the release.
The XML representation of the SO files will be kept in
the separate repository "spdk-abi" and cloning during
"confirm_abi_deps()" test.
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I37b4c556e8f8ffb5ffd67e16df9f186ef9c52294
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This requires creating and setting SPDK threads in the
subsystem unit tests as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I31acfb1d7e418f011acc9b48933032d8bf8a1c53
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
