per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)
For intel copyrights added, --follow and -C95% were used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2ef86976095b88a9bf5b1003e59f3943cd6bbe4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
verify.state files are not very useful because
we fail the tests at any first failure.
If there was something wrong with IO verification
then autotest.sh would fail.
Fio files with metrics output (IOPS, BW, latency, etc)
are also not very useful as per-patch tests are not
focused on benchmarking.
Fixes#2546
Signed-off-by: Kamil Godzwon <kamilx.godzwon@intel.com>
Change-Id: I33fbe2fb0749d840f08ffe0d606d206268140991
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13019
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK test script can fail during any point of the
execution. To keep using the same devices
between test runs in CI, those devices have to
be cleaned between runs.
To select device for tests or to clean before tests,
the partition table and lack of mount points is used.
SPDK GPT partitions were always considered not in use.
Meanwhile Linux GPT were not, even if lacking a mount
point.
Some of the SPDK tests create Linux GPT partitions,
which might remain after a test run.
Linux GPT partitions created during tests now contain
"SPDK_TEST" as part of their partition name.
This allows marking such block devices as 'not in use',
to be cleaned and used in further SPDK test.
fixes#2345
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0098776239da9b0c5dcc748625485284e4863525
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11220
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use getopts instead of using positional args. This
will be needed in future commits when more optional
parameters will be added.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If575fd871f906de5f9d89b2f3972fa54e3208147
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
During tests with new qcow2 image there is error:
ERROR: use the -f option to force overwrite of /dev/sdb1
when creating filesystem using mkfs.btrfs, adding -f
resolve this issue.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If6548d3d5781e2b46f794422144e2a635e700559
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4660
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Vhost nightly test fails on Error: Partition have been written, but
we have been unable to inform the kernel of the change, probably
because it/they are in use.
Closes#1090
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iafd051e02b3dd32ede8a62c69c7079a0facade0c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476639
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Patch b6af628 while addressing Shellcheck 2088,
broke the pathing to integrity_vm.sh within VM.
Originally tilde was used within quotes so it didn't expand,
since cmd was executed as root the path was correct on VM.
After the change the path was changed to $HOME, making it
actually expand on the host system (not VM). Path was made
incorrect.
Since we already scp to /root/, it shouldn't
be an issue to use that path in explicitly when executing.
This fixes recent nightly run failures.
Change-Id: I2e0ac767cbf77a71841db260e602b568b1f510a1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2088: Tilde does not expand in quotes. Use $HOME.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iea1eeaafc414c153f60634aaa39b0ab3272c9c48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't require these to be numbered.
Change-Id: I385f579b41d24eea02e157e53c4fc1530864bb5b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Making this explicit makes the tests clearer
Change-Id: I6c37f873683b38b644bebc42532694d45a181d04
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, construct this path by grabbing the home directory
of the current user.
Change-Id: Ia8d5cc2be40c0c3ac693c80a3132b970f7124183
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456704
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is much easier.
Change-Id: I4ae5f2f5b9393f65d07f39f03fa30628a40b01cf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459304
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's always set in autotest_common.sh, there's no need
to set it again in each test script.
Change-Id: Ib14c4189c553dad54a3065c1a1d413a5fc5a5347
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No need to prefix name with spdk.
Change-Id: I9b07a52f6c88d77e1dda2c63ec951c1847780cca
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We typically don't prefix bash functions with spdk.
Change-Id: Icda57e42acb83f4aa51731ac62f8db7ee26e658a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rootdir is the pattern used in the other tests
Change-Id: Idaedf8a3d9aeed54a9113a38986f29fa04355d9a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We do not need these lines in this script as it is meant
to run as standalone in a spawned VM.
Change-Id: I172227b6a7c6271d082f21677f13f2ce810fcfcf
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455092
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Follow the pattern that most of the other tests follow by
defining testdir and rootdir at the top, then sourcing
the common files.
Change-Id: I8f4374e91f20edc244e8e8bcf8f9df198b4509c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used in the automated tests. It's probably only
for manual testing. For manual testing we're moving to a model
where the test script can run with just the 'iso' option, so
let's drop this parameter to simplify.
Change-Id: Iaafd237bcd4185844e568e79828824bdaf31a25d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454093
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This matches the pattern used in other tests.
Many of the tests use a COMMON_DIR defined up top.
Instead of changing where this points, because it's used
for multiple things, just change the places where it
is used to source common.sh. This is lower risk for now
until these are cleaned up later.
Change-Id: Ib38ea9fdc94118c6c406f86177bab21c4e1c98b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This it to prepare for RPM package. Also lower number of dependencies
needed by SPDK tools.
Update changelog to deprecate Python 2 and explicit interpeter invoking
in scripts.
Change-Id: I2497cca721cbcbadc1c99c675f8b8b7f682d5efa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for NVMe bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib9a0475d735af2616a3005d04530ca825ece8a52
Reviewed-on: https://review.gerrithub.io/416546
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix in scripts that use BASE_DIR variable
that is redefined in common.sh.
Change-Id: Ie4ad9fb85f0042d274738f19b0d4696b2056efda
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/411833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first step toward fixing the behavior of the lvol bdev
module so that it handles spdk_bdev_unregister() correctly.
Currently, when an lvol bdev is unregistered, this causes the associated
lvol to be deleted; this isn't the desired behavior, since
spdk_bdev_unregister() is just meant to drop the currently-exposed bdev,
as in a hot-unplug event, not destroy the backing storage.
The current implementation of the new destroy_lvol_bdev method still
calls into the exsting (broken) spdk_bdev_unregister() path, but this at
least lets us fix the existing delete_bdev RPC callers that really
intended to destroy the lvol.
The next step is to make vbdev_lvol_destroy() call spdk_lvol_destroy()
instead of unregistering the bdev, which will require cleanup in the
generic lvol layer to remove the close_only flag.
Change-Id: Ic4cb51305d31f6d7366a82ba7bf7b19ebbcd3e9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408084
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are timeouts in NIGHTLY_TEST mainly caused by long duration
of spdk_vhost.sh --fs-integrity-blk test. It could be shorten by
reducing file size in fio test
Change-Id: Ic99f6f3ce52ed8bf1fafc75bb0f908d9df0d0d4e
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/405587
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactor filesystem test so that it does not use virsh, only qemu.
Source compliation on filesystem was replaced with FIO+verify
on file located on mounted filesystem.
Reason for this change is that test for single filesystem type
took about 1:30 for just compilation itself.
Considering that we have 4 filesystems in test with 2 different
vhost controllers, it took way too long.
Change spaces to tabs.
Change-Id: I396d653efe2bbf76934b2532576455be43632ff4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/398603
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New vhost user messages GET_CONFIG/SET_CONFIG can be used for
vhost-blk for the purpose to get configuration parameter such
as: Capacity and block size. This commit enable this feature,
users don't need to append capacity any more when started
QEMU. Also event notifier is added for the purpose to change
capacity of block device while QEMU is running.
Also re-enable the vhost-blk tests.
Change-Id: I06ef697984eeea3abbbd655bdcaccaa3b7aa72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/386546
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Install the new custom qemu branch in a different location
(/usr/local/qemu/spdk-2.12-pre) so it can coexist with the current qemu
branch.
Change-Id: I6986dcaef804dcefc4e77c83c019ba0f3be8dbd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/398983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
The test system may not have qemu-img installed system-wide, since we
build a custom version of qemu and install it in a non-standard path.
Change-Id: I52e16fc7bbf90b9c3d0832f6a81c5cfecd5f24ed
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Chen Wang <chenx.wang@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add vhost-scsi and vhost-blk filesystem test cases with
lvol and nvme back-end in nightly test
Change-Id: Id2cccd9a45aaa995bef90415855835b93447f2e9
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/390923
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Updates for running with vhost-blk.
Removed checking & cloning Qemu sources - should be
already installed in working directory.
Some other minor fixes for typos.
Change-Id: Ifd790a301c8ca1e19434f03ba32f5eb916dbe0a6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/373897
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
