per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
ioccsz is specific for fabrics. spdk_nvme_ctrlr_is_fabrics() returns
true for custom fabrics transport. Hence we can use
spdk_nvme_ctrlr_is_fabrics() safely in nvme_ctrlr_update_nvmf_ioccsz().
Before this change, in the unit tests, ctrlr->trid.trtype was set to
zero at initialization. After this change, for most cases,
spdk_nvme_ctrlr_is_fabrics() should return false for most cases.
SPDK_NVME_TRANSPORT_PCIE did not work. Hence, initialize
ctrlr->trid.trtype by SPDK_NVME_TRANSPORT_CUSTOM_FABRICS instead.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I4bedcab4a9f2876c1c9463ff10ad0966754f1713
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13948
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function `nvme_ctrlr_init_ana_log_page` is exactly
same with `nvme_ctrlr_update_ana_log_page`, so remove it.
Change-Id: I1ad51635f47cf95cfa6de217e3b9144885c3b74e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13652
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default, the SPDK nvmf target reports vid==INTEL,
which results in the SPDK nvme driver trying to enable
Intel vendor-specific log page. Fix this by trying to
enable those log pages only for PCIE transport
controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78ebf365d4fa6295d1f610697266c3ead765988d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
We can only get to this code path if the controller
has vid==INTEL, so make that more clear by changing
the check to an assert.
Remove unit test that calls
nvme_ctrlr_construct_intel_support_log_page_list()
for a controller that is not VID==INTEL - this is
no longer valid.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b58451bc95992bf641e7452f0ac4c2bac9fe31c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
In the following patches, nvme_ctrlr_process_init() will be used to
disable the controller when disconnecting the admin qpair for PCIe
transport. In this case, we will have to exit nvme_ctrlr_process_init()
after CSTS.RDY is 0. However, spdk_nvme_ctrlr_reset() and
spdk_nvme_ctrlr_reconnect_poll_async() have to continue
nvme_ctrlr_process_init() until the controller becomes ready.
To differentiate stop and continue clearly, add a new state
NVME_CTRLR_STATE_DISABLED to enum nvme_ctrlr_state.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic0a5fb7114d4eeb1cefec28bc404184768fb0a96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12613
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add a new flag is_disconnecting to struct spdk_nvme_ctrlr.
Separate calling nvme_ctrlr_disconnect() and nvme_ctrlr_disconnect_done()
by using the flag is_disconnecting.
Additionally, change nvme_ctrlr_fail() to skip setting ctrlr->is_failed
to true if ctrlr->is_disconnecting is true.
Change-Id: Ie2c74ba41f120662a30f6198751d07005d23abcf
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed afterwards. An already initialized mutex should not
be re-initialized.
Add calls to nvme_ctrlr_construct where nvme_ctrlr_destruct is
called without a matching construct.
Add missing calls to mutex_init and mutex_destroy as required.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I9753fa7fbd77402f23a08a66f4b489a5c229487a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Fix warning: missing braces around initializer
This issue is seen with gcc (GCC) 4.8.5 20150623.
Warning like below:
nvme_tcp_ut.c:243:9: warning: (near initialization for ‘ctrlr.ns’) [-Wmissing-braces]
nvme_tcp_ut.c: In function ‘test_nvme_tcp_req_init’:
nvme_tcp_ut.c:525:9: warning: missing braces around initializer [-Wmissing-braces]
struct spdk_nvme_ctrlr ctrlr = {0};
^
nvme_tcp_ut.c:525:9: warning: (near initialization for ‘ctrlr.ns’) [-Wmissing-braces]
And more information from below link:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Change-Id: I88b5b3908d5d0daa9383e47a1ed53288f342ca3b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11137
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
nvme_ctrlr_disconnect_qpair() calls nvme_poll_group_disconnect_qpair() if the qpair
uses a poll group, and nvme_poll_group_disconnect_qpair() calls
nvme_ctrlr_disconnect_qpair() if the state of the qpair is not DISCONNECTING.
This relationship made the code very complex.
A few patches starting from this patch simplifies disconnect and free qpair
operations.
This patch swaps the ordering of nvme_ctrlr_disconnect_qpair() and
spdk_nvme_poll_group_remove() in spdk_nvme_ctrlr_free_io_qpair().
This ensures the qpair is disconnected when spdk_nvme_ctrlr_free_io_qpair()
calls spdk_nvme_poll_group_remove().
This enables us to limit spdk_nvme_poll_group_remove() to be available
only for disconnected qpairs.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I0601a74f953a2efc4f177a51a4450baea33533d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10670
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only populate active namespaces into the main namespace tree, so we
don't need a separate list of active namespaces too.
Change-Id: Iaf194f806cc1d9672f5567cff3dffafff3165069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since this is now sparsely populated, a tree is a better choice.
Change-Id: Ie66d913fa1d298de56a7d22ef55f0adf7f8803b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10031
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some subsystems report a very large maximum value for the number of
namespaces, but in essentially every case the subsystem is sparsely
populated with active namespaces. To save memory, don't allocate
objects for the inactive ones.
Change-Id: I4cbeb5a7a898d3c685f4a3a9ec4c2ce45efffb92
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If nvme ctrlr is resetting or initializing, free_io_qids
bitmap is already freed or not created yet. In that case
an attempt to create IO qpair leads to segmentation fault.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6a97bf81d5a568db20d23b3f88cf01e994ba42e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
In the one place this was called, we can call nvme_ns_construct
instead. There's no harm in re-fetching the identify pages.
Change-Id: I91292ff9650bdc7edd5588a05837b671dcac1922
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10102
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also we don't treat exceptions when getting INTEL log pages
as a fatal error, the initialization will still contine.
Change-Id: Ic2fd2be510fde2679c1546482934d0a180266936
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the CONFIGURE_AER state before SET_KEEP_ALIVE to
make sure that we run the CONFIGURE_AER state for
discovery controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4e24f6507c43e3fece06b9161ff8e0b8fa0e97d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Discovery services using the SPDK nvme driver may
use long-lasting connections that detect AER completions
to determine when there are changes in the discovery
log. This means that we still need to send keep alives
on discovery controller admin queues. So move the
SET_KEEP_ALIVE_TIMEOUT state immediately after
IDENTIFY, and run the SET_KEEP_ALIVE_TIMEOUT state
even for discovery controllers.
Note, we need the IDENTIFY's KAS value to properly
set the keep alive timeout, so we have to keep the
IDENTIFY state before SET_KEEP_ALIVE_TIMEOUT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6403c28fb72d42629c5f9009a89c4bfd44d162
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For DSM command, the NVMe drive may take a long time to finish it,
if we set a small timeout value for DSM command, the bdev/nvme module
will try to reset the IO queue pair when timeout happens,
in `spdk_nvme_ctrlr_free_io_qpair`, we will abort the outstanding
IO requests first, then in the `nvme_pcie_ctrlr_delete_io_qpair`,
we will poll the CQ for any requests that have been completed by
the NVMe controller, if there are NVMe completions in the CQ,
we will finish them again, thus double completions happened.
Here we rename `nvme_qpair_abort_reqs` to `nvme_qpair_abort_all_queued_reqs`,
so the common layer will just abort queued request, and let each
transport to abort outstanding requests case by case.
Fix#2233.
Change-Id: Icae6214239160c615418cb514fc51cfe77b59211
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was sometimes used as the maximum array index and sometimes as the
maximum count. Make it consistent everywhere and give it a better name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I518efd99a7d36584624490b0b3497bb6e81ce9ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10101
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This meant to zero the entire active namespace list.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2da2293b53acd57d3480cf93b052eb1520de35d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10028
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Abort any queued admin requests once admin queue gets enabled. A request
can get queued if a controller is being reset and it gets submitted
while admin qpair is being reconnected. If these requests aren't
aborted, the init process will stall, as requests don't get resubmitted
while controller is resetting and subsequent admin commands required for
the initialization would be queued too.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If456a297d2d434b3cc741816cbfb13b01d37e963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This removes some code that was duplicated in the
CHECK_EN and DISABLE_WAIT_FOR_READY_1 states.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie5d175540f71c692f7784c7ff22a48f34b9b7082
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added mocks in preparation for making the NVMe controller initialization
use asynchronous versions of the register operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifbcc3c73933fb965db710389fec8cd2d52886d4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8610
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can be done immediately after receiving the controller identify
data for now.
Change-Id: I527a44c4d1f4d3ad2eeb8fc77e07086c2358cac3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Split the connection process across two states, which allows the
transport to connect the admin queue asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie84477331df0abf5ffdfc2a0ff5d5ada760c9e73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This fixes unit test failure caused by 4ac203b2d, which changed the way
asynchronous events are reported to be on a per-process basis.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I150de552bb4be5e184d6eb518abf89f83de106eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9308
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Just add a single .gitignore file in test/unit
that covers *_ut. That allows us to eliminate
100 .gitignore files in the test/unit directory
hierarchy.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia190587b4d5c6f1847471be27550cbfb843dc01e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This fix is as same as for NVMe bdev module.
If a ANA log page has two or more ANA group descriptors, the second
or later of ANA group descriptors will not be 8-bytes aligned.
Then runtime error would occur as follows:
runtime error: member access within misaligned address 0x612000000074
for type 'const struct spdk_nvme_ana_group_descriptor', which requires
8 byte alignment
nvmf_get_ana_log_page() in lib/nvmf/ctrlr.c creates a ANA log page
data and processes 8 bytes alignment correctly because we got the
same runtime error before. However, lib/nvme had been missed at that
time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idaa610544dc5cb659c387fcd38a2b4b97cbd06e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8398
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using the CMB for SQs is not a standard use case.
Performance can vary widely when using CMB for SQs
and is typically not the configuration used for
benchmarking.
So let's change the default value here to 'false',
users can still opt-in by setting this option to
true in the spdk_nvme_ctrlr_opts structure prior
to attach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab746ba777b04152ffb92fea2a2bb923a0a0bf21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8227
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This patch changes the order of IDENTIFY_ACTIVE_NS and CONSTRUCT_NS
controller states. It is required to further improve memory management
for namespaces by allocating memory only for active ones.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ie540442b1bd9e897afcbaa4319c139109dd0c515
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6503
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous implementation allocated memory just once at the beginning of
active NS list retrieval procedure. It allocated memory for maximum
possible number of active namespaces, i.e. 'cdata.nn'.
This patch changes allocation logic. One page is allocated at the
beginning. If more is needed, reallocation is done with one more
page.
This patch also removes SPDK_MALLOC_DMA flag from allocation since we
don't do RDMA directly into this buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Iaa80c4d70c54daaf71dcbf755c63a01a1d83b772
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
