-Change cuse ioctl reply from status code to whole status field.
-Add negative test for nvme cli cuse: Power Managment on Namespace
Signed-off-by: Ahriben Gonzalez <ahribeng@gmail.com>
Change-Id: I55a88a4f5ace5040f79c05edfc0b8559905bdd2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For the test case, we only delete the SQ for a queue pair,
this will make SPDK NVMe driver not to send delete CQ when
shutting down the controller, so here also delete CQ at
last.
Change-Id: Ibdfb727710ca51524858158edac415e93bb1c1e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10528
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test fails due to incorrect path to log.txt file needed
to detect start of hotplug application.
The change that introduced the bug:
Change-Id: Ia14507a282796ad28f067c086b9112ae6463b654
This change corrects the file path.
Change-Id: I5d43c47044f46100fa4ca7b845973c427cae237c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10976
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By default, this timeout waiting for response is set to 60 seconds,
we want to wait a bit longer than defined RUNTIME value.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I6f91da6c3996967271dda7c49320a2b8573bc49f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10169
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib696c7787151e4898b63f57749bd134333e94a23
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Bloated log files appear during some tests
(nvmf_phy_autotest, during nvmf_abort test fot example),
what makes parsing them inconvenient. This change aims
to disable logs that cause this issue by adding a new flag
for SPDK target and disabling notice level logging completely
(using --silence-noticelog proved insufficient).
Fixes: #2149
Change-Id: Ibbad92d87d90fe73c23d6027e0ff8ec49b0393c2
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10311
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I1a87d9245ba8a4f4e01d510cae4a318fa3323ca2
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10257
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also consolidate Log Page Offset test cases together into a
new test function.
Change-Id: I0f9d25f1f5c3aa2238caf5766a9084bd561aefd1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1a2fa8e818835889999fd615e8c192ffe2ef735d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10154
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
With more test cases added, we may not know exactly how many
tests cases are covered by the compliance test tool, so here
we use `Command Type` + `Command` + `Test Case` as the function
name of each test case.
Change-Id: I9d1f90c2463d15657133043fdf70d8124ef3fd87
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Upstream QEMU initializes the Number Of Namespaces (NN) on each of
the emulated nvme subsystems to NVME_MAX_NAMESPACES (256) - this is
the case even for a device which doesn't have any active namespaces.
In case nvme_fio_test() finds such a device (no active namespaces)
it still attempts to run fio against it due to a false positive which
comes from looking up the Number Of Namespaces.
Adjust the check to look for strings related to active namespaces
and pick devices which report any.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5b222f1152f2a799b0d600ca19ad13eda009878a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add a check for this driver and enable iova=pa mode when it is
detected.
Add an option for the hotplug application to force iova mode.
This is to avoid:
EAL: Expecting 'PA' IOVA mode but current mode is 'VA', not initializing
EAL: Requested device 0000:86:00.0 cannot be used
while using hw_hotplug test.
Change-Id: I7ff819c04b1e567b5ef88fc8f551ecec901806c8
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9774
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we only check return code of the pipe process and
not its subprocesses. This leads to unexpected passes during testing.
Change-Id: Ia14507a282796ad28f067c086b9112ae6463b654
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9711
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Only active namespaces can be used for I/O.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Idf63e9f5e03244c1671288038fed54831463c3eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibe62c57202549e13eeefbc2b911d2dbf79b622d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10079
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Change-Id: I99768b4d9b1ef3c81431ea069af93e0a38b05746
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a reproduction vehicle for issue #2218.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib52d959436550461cf787b918b8870218536a4c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Icf7f978d7083afdc729959328d985a660111e371
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is an build error on arm64:
nvme_compliance.c:203:42: error: comparison is always true due to
limited range of data type [-Werror=type-limits]
while ((op = getopt(argc, argv, "gr:")) != -1) {
For "op" is defined as "char" here. "char" is "unsigned char" on arm
and "signed char" on x86 by default. So change its type to "int"
to avoid this error.
Change-Id: I1f9fa8e0112538e005e8b88c1bfda9257b3f517e
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9853
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Change-Id: I9ba43f2c961b5590b472671b400163cd20199f28
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also add "-g" parameter to use single segment file.
Change-Id: If12c75ccdf1e6074951819fb94cc85a982f9d843
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9677
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of relaying on vhost VM image, which may be incompatible with
the host system, perform the hotplug test locally against detecte
nvme device.
Also, limit this test to Linux since it never was intended to run
on other platforms in the CI due to qemu dependency.
Fixes#2150
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie048343ceb52c1a45193a6c857bc3a09fa1ec3fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9461
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a rough first cut at an nvme_compliance test
application. Initial focus will be on testing
the SPDK vfio-user target, but over time many of the
tests here will apply to TCP and RDMA as well (or
even running the test against a virtual nvme device
backed by vfio-user in a VM).
Usage:
test/nvme/compliance/nvme_compliance -r <trid>
There is also a test/nvme/compliance/compliance.sh
script that starts the vfio-user target with a single
malloc namespace, and runs the nvme_compliance
app against that target.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2c19df07c9ad93a69420545ab825015f49957fc2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If NN is very, very large, this allocates too much memory. For now, just
use a list.
Change-Id: I904977673d8fb6c86f03c94ba798c6cc07f4a4d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enable BPF traces only for bdevperf for now, as it's
easiest to do thanks to "-z" option (wait for RPC before
starting the workload).
Other performance tools will come later - workloads start
immediately and enabling traces will need more thought.
Change-Id: I4a1cab358f4f3fcf1c838ed2dcd06b595c79f3dc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8687
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For Test Case 2: SPDK NVMe BDEV I/O Cores Scaling
we need to specify DPDK main (primary) core.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I53d706c4173e16035a3883c29547659a0c7a22fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8553
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This new connect_stress application connects to a
specified subsystem, creates some IO qpairs and
reads the CSTS register. It goes through this loop
over and over again until the specified time expires.
The connect_stress.sh test script runs this application,
and then while it is running does continuous add_ns and
remove_ns RPCs.
This stresses nvmf handling of connect (admin + I/O) as
well as get_property commands.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ab5156045cf5614f74988e38a9d37db96d7d5b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8572
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new function spdk_nvme_detach_poll() to simplify a common
use case to continue polling until all detachments complete.
Then use the function for the common use case throughout.
Besides, usage by simple_copy application was not correct, and
fix it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic14711cd8478bf221c0fe375301e77b395b37f26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe driver layer will clear this log, so we don't
need to send another one in the aer callback.
Here we change the logic to compare with previous NS
state, if the NS state is same it will fail the test.
Change-Id: I6d80cb6a5f6d5eab92b8ccac601a23c19cea4003
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8175
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Runtime RPCs such as bdev creation has no chance to wait for
bdev examination to finish. To handle this case commit below
introduced bdev_wait_for_examine RPC, and built it into all newly
saved JSON configurations:
(e57bb1af)lib/bdev: build bdev_wait_for_examine into subsystem
Some tests generate the configuration by hand, rather than
saving it from an existing application.
This patch embeds this RPC into the test configs.
Fixes#1760
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I79f998d722a2d19aa98b78333c64dbd2c1151444
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7861
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The e2edp test `dp_with_pract_test` includes code to modify the data
length if the size of metadata is 8 bytes, but fails to set
req->use_extended_lba if we actually need to pass an extended LBA
(md_size > 8).
Similarly, the `dp_guard_check_extended_lba_test` miscalculates the CRC
when md_size is > 8. The CRC must be calculated over both data AND the
first md_size - 8 bytes of metadata.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Change-Id: I5252c1fe02908745d6aa68799859ed85f32e87ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Case 'H' should return 0, this is a normal return.
Change-Id: I09f81e08d782007c62592475750e70461c83f318
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The original value of bs is 4096, we can rewrite it in another script.
When spdk_nvme_ns_supports_extended_lba(ns) is 1, we need to
test with an integer multiple value of extended_sector_size, such as 4160.
Change-Id: I8257bee4f741f62597bb2bb645ee9c59cf57bf33
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Allow for alternative fio job layout.
"group" (default) will create X fio job sections for
X assigned CPUs and distribute available NVMes between
sections. (e.g. 4 CPU test with 24 NVMes will result in
4 fio job sections with 6 NVMes each and scaled iodepth)
"split" will create a separate job section for each
available NVMe, but still pin it to desired CPU thread
using cpus_allowed option.
This allows for alternative way of testing io_uring
which fails to run some cases with fixedbufs=true and
high iodepth values (caused by system-wide default
UIO_MAXIOV=1024).
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iab835596a59f6437b067d1117208e5abd6c8d36b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I00998ce36b46902687065c5fa4684da9b7dd26d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Save latency log only when needed (i.e. latency tests).
Otherwise in some condition (high IO tests) this may stress
fio too much and cause a crash or fio might just refuse
to run the job.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I61993d05ba91e88e9b6580d8ee39f255e1b09076
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5476
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
io_uring engine benefits a lot from these options
for better results.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1fbc62b88e1726f4ea1569c6ee6997164a9d09a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Similarly replace PCI_BLACKLIST with PCI_BLOCKED.
Use of ALLOWED/BLOCKED matches similar changes made
in DPDK.
While here, replace use of term "blacklist" with "blocked"
in one of the nvme perf scripts. The usage there was
associated with how devices are blocked by using the
environment variables that are changed by this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I720d99118ba5e050f436612c9fd415db44294a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Add a cast when comparing an enum to an integer value.
Add an explicit uint64_t cast to the definition of BLOCK_CNT to prevent
value truncation.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I093cffe7e79bc04eba012f4ffaf33062a642d062
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5137
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes link issues with clang on some systems.
Fixes another part of issue #1613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd51351b8e38043f267918b85e8ed1c3daab2db7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Need to select proper path for passing libs into the VM
in case we're building with custom DPDK.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I97d301c70adee31b727c6b6673eadac3cbde9817
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4975
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We want to replace few qcow2 images with one universal.
This commit contains:
- change password in autotest.sh
- change image path
- change image name
- use snapshot mode in hotplug.sh instead of copying base image
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I75c457fe75f005b0ab43ca909be7886529ed115b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4551
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Use spdk_nvme_detach_async() and spdk_nvme_detach_poll_async() with
a local variable detach_ctx to detach multiple controllers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I77cdc07ddfcd97569e31eeb245cd4e5a26289dbd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4441
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
From the log we can see that it reports ns_ctx was freed before it
was used. In unregister_controller, it still need ns_ctx to do io_complete.
And now this app works as a signle worker to do something.
Just need to change the order, execute unregister_worker after
unregister_controllers.
Fixes issue #1626
tested on clearlinux.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I392ff168abb862ba236a24b775fb31bb341e2157
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4761
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function does need to handle legacy configs and
it's single use did not request any wait_for_spdk_bdev.
Remove those arguments.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic988762c7ca622ff538aeb7bd2bb529e6e6d56e4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4616
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Log flags could also report on SPDK_LOG_INFO level by using
SPDK_INFOLOG() macro. Yet this did not result in additional
log due to check for debug build.
This patch allows release builds to use that flag.
Meanwhile the -L option besides turning on particular log flag
changes print log level to SPDK_LOG_DEBUG.
Applied changes to serveral applications to follow the
behaviour of event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0d6cce33263c350d6d83300d60e7d15bdfe4b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4557
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
AIO not working because the check for $OS==Linux
is before the $OS is set. Therefore, the binary
build does not include libaio
Change-Id: Iab862d0113d637134a5275d46252c60fe27dde5e
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4516
Reviewed-by: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using TAILQ instead of next pointer will make the object relationship
cleaner and the asynchronous detach opearation easier to implement.
Besides, do the following minor clean up.
Rename g_workers by g_worker and register_workers() by register_worker()
because it holds only a single instance, and clean up references to g_worker.
To fix memory leak at cleanup, add unregister_worker() to free a worker
and its associated contexts.
The prefix, spdk_reset, was not necessary as function name. Rename
spdk_reset_free_tasks() by free_tasks().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0da11108222491e3290ffa5e405eb3ebe70a91bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make the object relationship cleaner and the asynchronous
detach operation easier to implement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3095d59b632ea2fc29fc44f8da330cb98c50bed1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Here code returns but context isn't freed.
And we can change to break here also.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I8f2173ae3599c13c99c7d70c19e2f8ce0c023f38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4396
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Print bdev.conf we're going to use in test
after generating it.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8b74b8afb9c4fca200b961d0d0d9818578ef1307
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Setting should be "-1" for polling, otherwise "0"
works as hybrid-polling.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5f1fb602f750162a7c164703859f2e74c9092146
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These were not really needed and parsing functions had to
be unnecessarily called multiple times.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I277125bbb3d598a348164e8834843d0d04f1434c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4098
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Calculating kernel fio results did not take
number of workload retries into account for latency
stats.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I418845d2f6be328827e4217c2eca761b0c211504
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4096
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Using only Bash for calculation in this script
results in operating only on integers, which lead
to wrong results being saved after test run.
For example - submission latency of 0.175usec was
saved as 0usec.
Change-Id: I6f9924d12189631ab6d0bdc5385e642b6c2aa34f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes all the sleeps called after setup.sh reset. These
sleeps were meant to wait for devices given tests depend on.
Change-Id: Ibb86c9f6f8d5f1b05d165e84d9019530af84f9ea
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nblocks is zero based, so read path was missing the increment.
NVMe device that cuse represents can be of any block_size,
so rather than hardcoding 512 - actually verify it.
Both paths didn't request enough of a buffer from cuse.
Reported-by: Niklas Cassel
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I228dc2572bc94ecbcb913e950d912a7ab5be9434
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4037
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When opal_revert_and_init() is interrupted for some reason,
the spdk_tgt still exists, but it should be killed at the same time.
Change-Id: I8546d3b0b4d6a0fda1687558a664decb535ef2b4
Signed-off-by: WANGHAILIANG <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3830
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Originally the idea was to disable error checking,
to match output from Kernel and SPDK NVMe cuse.
This includes passing test commands and failures.
Any discrepancy would be caught by log output diff
at the end.
Flaw in this logic is that test command itself might
be incorrect. We shouldn't depend on that, nor
attempt to cover up some of the failures even if
they occur on both interfaces.
Most probable cause for this at all, was NVMe emulated
in QEMU not really working with all the nvme-cli commands
from this test.
Since the original creation of this test, CUSE executes
on physical devices (to be able to support namespace management).
The behavior there is predictable and works with current
test commands, thus the test exits on any error with this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I086faf38b2cbbb6225935cc50d4fad14e81f1972
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We can do better than "sleep 5". Instead use waitforfile(),
that will wait until the namespace is available.
Moved around the variables with names and checks for the ctrlr/ns
existence after all the tests complete.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8326c2cec0d0cf5aec88b5f80c1126c81eb09436
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2951
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If intel_pstate is disabled in boot options, allow to
change CPU frequency using "userspace" cpu governor.
Change-Id: I390492c7be28df408f3cbb774ba5360859649fe0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3376
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For some reason the routine for generating fio
job/filename sections was different for kernel and
spdk fio modes. This made fio results hard to compare
because even configuration files themselves were not
comparable.
The function was modified to create the same fio
configuration files for kernel and spdk.
While at it, iodepth calculation has been slightly
modified as well. It is now being calculated for each
[ ] job section, so that each "filename" gets the
actual iodepth value specified in test run parameters.
While generating the config file the script will add
NUMA node information as a comment for "cpus_allowed"
and "filename" sections, so that it's clearly visible
how resources are aligned. In case of cross numa
configuration additional warnings will be printed to
screen as well.
For example, a configuration file for running test with
7 NVMe drives, 3 CPUs and effective (per filename) queue
depth of 32 would look like this:
run_perf.sh --cpu-allowed=0,1,2 --iodepth=32
--driver=kernel-classic-polling [...other params...]
--------
[filename0]
iodepth=96
cpus_allowed=0 #CPU NUMA Node X
filename=/dev/nvme0n1 #NVMe NUMA Node X
filename=/dev/nvme1n1 #NVMe NUMA Node X
filename=/dev/nvme2n1 #NVMe NUMA Node X
[filename1]
iodepth=64
cpus_allowed=1 #CPU NUMA Node X
filename=/dev/nvme3n1 #NVMe NUMA Node X
filename=/dev/nvme4n1 #NVMe NUMA Node X
[filename2]
iodepth=64
cpus_allowed=2 #CPU NUMA Node X
filename=/dev/nvme5n1 #NVMe NUMA Node X
filename=/dev/nvme6n1 #NVMe NUMA Node X
--------
Change-Id: Ida2f781fbb93c4a8c62154e711151152843ab997
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3370
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Configuration file generation was split into multiple
places/functions in scripts. Move it into a single
function. "time_based" fio parameter has been moved to
fio config template file as it is not configurable.
There is still a lot of room for improvement here, because
create_fio_config() function uses mixed local variables
(as function arguments) and global variables.
Change-Id: Ica3717d0d28692d24c861c2d32e729761c5c8647
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3345
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
A workaround for kernel deadlocks surfaced in #1275.
DPDK basically offers two APIs for hotplugging all PCI devices:
rte_bus_scan() and rte_bus_probe(). Scan iterates through
/sys/bus/pci/devices/* and creates corresponding rte_pci_device-s,
then rte_bus_probe() tries to initialize each device with the
supporting driver.
Previously we did scan and probe together, one after another, now
we'll have an intermediate step. After scanning the bus, we'll
iterate through all rte_pci_device-s and temporarily blacklist any
newly detected devices. We'll use devargs->data field to a store
a timeout value (integer) after which the device can be un-blacklisted
and initialized. devargs->data is documented in DPDK as "Device
string storage" and it's a char*, but it's not referenced anywhere
in DPDK. rte_bus_probe() respects the blacklist and doesn't do
absolutely anything with blacklisted ones.
The timeout value is 2 seconds, which should be plenty enough
for an NVMe device to reset, leave the critical lock sections in
kernel, and let us initialize it safely.
Note that direct attach by BDF doesn't respect the blacklist,
so an NVMe attach RPC won't be delayed in any way, it will continue
to work as it always did. Only the automatic discovery & enumeration
is deferred.
Change-Id: I62b719271bd0755bc2882331ea33f69897b1e5e5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1733
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There's no reason to keep usage and getopts
outside of the main script.
Other small changes while at it:
- use small letters for all "dir" variables
(consistent with most of other test scripts)
- try to move default & global variables into
one place.
- remove long comment from top of the main script.
It was basically the same as "help" for getopts.
Change-Id: Ic99f4bb1808b55dea80b534f7b4e0a65595ed053
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3335
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
