Found with misspell-fixer.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: If062df0189d92e4fb2da3f055fb981909780dc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15207
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)
For intel copyrights added, --follow and -C95% were used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2ef86976095b88a9bf5b1003e59f3943cd6bbe4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
gcc 12 assumes that nsid might take value of UINT32_MAX,
which when represented as a string does not fit in ns_dev.
This is fixed by accomodating the UINT32_MAX string representation
and the 'n' character.
Following error was shown before this patch:
cuse.c: In function ‘verify_devices’:
cuse.c:133:42: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
133 | snprintf(ns_dev, sizeof(ns_dev), "%sn%" PRIu32, ctrlr_dev, nsid);
| ^~~~~~
In file included from /home/tzawadzk/spdk/include/spdk/stdinc.h:23,
from /home/tzawadzk/spdk/test/spdk_cunit.h:9,
from cuse.c:7:
/usr/include/inttypes.h:104:27: note: format string is defined here
104 | # define PRIu32 "u"
| ^
cuse.c:133:9: note: ‘snprintf’ output between 3 and 267 bytes into a destination of size 266
133 | snprintf(ns_dev, sizeof(ns_dev), "%sn%" PRIu32, ctrlr_dev, nsid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I14e058edc780d33abdd5eb6ce5ab47ac5d18f10a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13412
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Adding metadata support for io commands. Currently metadata is ignored
even if present in the cmd struct. Making metadata adress
readable/writable depending on data transfer bits. Adding extra unit
test to make sure metadata fields are populated.
Signed-off-by: Ahriben Gonzalez <ahribeng@gmail.com>
Change-Id: I1d01974a6b2831c82b43e94073065d235eea429a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10854
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Modify admin passthru so that result field of passthru struct is always
populated. This should be safe since dw0 is either reserved or contains
command specific info. This is specifically meant for the namespace
management command when attempting to create a namespace. As per spec:
"Dword 0 of the completion queue entry contains the Namespace Identifier
created.". So for nvme cli and perhaps other application to see what is
the id of the namespace created there needs to be a way to pass the
information back.
Signed-off-by: Ahriben Gonzalez <ahribeng@gmail.com>
Change-Id: Ide4effc126ad9eedac95b0700dd65041ed4b35b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10633
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
-Change cuse ioctl reply from status code to whole status field.
-Add negative test for nvme cli cuse: Power Managment on Namespace
Signed-off-by: Ahriben Gonzalez <ahribeng@gmail.com>
Change-Id: I55a88a4f5ace5040f79c05edfc0b8559905bdd2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10602
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If NN is very, very large, this allocates too much memory. For now, just
use a list.
Change-Id: I904977673d8fb6c86f03c94ba798c6cc07f4a4d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Similarly replace PCI_BLACKLIST with PCI_BLOCKED.
Use of ALLOWED/BLOCKED matches similar changes made
in DPDK.
While here, replace use of term "blacklist" with "blocked"
in one of the nvme perf scripts. The usage there was
associated with how devices are blocked by using the
environment variables that are changed by this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I720d99118ba5e050f436612c9fd415db44294a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This fixes link issues with clang on some systems.
Fixes another part of issue #1613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd51351b8e38043f267918b85e8ed1c3daab2db7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This removes all the sleeps called after setup.sh reset. These
sleeps were meant to wait for devices given tests depend on.
Change-Id: Ibb86c9f6f8d5f1b05d165e84d9019530af84f9ea
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nblocks is zero based, so read path was missing the increment.
NVMe device that cuse represents can be of any block_size,
so rather than hardcoding 512 - actually verify it.
Both paths didn't request enough of a buffer from cuse.
Reported-by: Niklas Cassel
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I228dc2572bc94ecbcb913e950d912a7ab5be9434
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4037
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Originally the idea was to disable error checking,
to match output from Kernel and SPDK NVMe cuse.
This includes passing test commands and failures.
Any discrepancy would be caught by log output diff
at the end.
Flaw in this logic is that test command itself might
be incorrect. We shouldn't depend on that, nor
attempt to cover up some of the failures even if
they occur on both interfaces.
Most probable cause for this at all, was NVMe emulated
in QEMU not really working with all the nvme-cli commands
from this test.
Since the original creation of this test, CUSE executes
on physical devices (to be able to support namespace management).
The behavior there is predictable and works with current
test commands, thus the test exits on any error with this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I086faf38b2cbbb6225935cc50d4fad14e81f1972
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We can do better than "sleep 5". Instead use waitforfile(),
that will wait until the namespace is available.
Moved around the variables with names and checks for the ctrlr/ns
existence after all the tests complete.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8326c2cec0d0cf5aec88b5f80c1126c81eb09436
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2951
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds waitforblk() after rebinding the driver.
If timing was unfortunate, it was possible to issue
id-ctrlr command to a device that was not yet ready.
Meaning the support for fw command was not read properly.
No error was reported due to "set +e", so this patch moves
it till after id-ctrlr.
Example of the error:
# get_nvme_ctrlr_from_bdf 0000:82:00.0
# readlink -f /sys/class/nvme/nvme9
# grep 0000:82:00.0/nvme/nvme
# bdf_sysfs_path=/sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9
# [[ -z /sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9 ]]
# basename /sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9
# printf '%s\n' nvme9
# nvme_name=nvme9
# [[ -z nvme9 ]]
# set +e
# ctrlr=/dev/nvme9
# ns=/dev/nvme9n1
# /usr/local/src/nvme-cli/nvme id-ctrl /dev/nvme9
# grep oacs
# cut -d: -f2
/dev/nvme9: Resource temporarily unavailable
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5728a5062cd553eb39d18d9869fdf56319a27777
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2950
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Use 512B block size when running nvme_namespace_revert
routine. Need to use this block size because of
vhost_boot.sh test case.
Fixes#1452
Change-Id: I5f41cf2bf9d63b811849a99de6cba9b7b5a1d97d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case when no device supporting Namespace Managment was found,
the test case exits without producing an error.
For example QEMU NVMe emulated device does not support it, thus
only physical devices have to be used right now.
This goes against design of "run_test" function, that when executed
should always run and never silently skip.
This patch adds check whether there is a device support and triggers
the test case only then.
Note that original code for selecting the device is still in original
script. This is to enable running nvme_ns_manage_cuse.sh on its own.
Right now CUSE tests are only enabled on VMs so nvme_ns_manage_cuse,
was added to exception list.
This will soon be reverted as the tests are moved to job that
runs on physical machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie784696c2628b5fe45ce751b3978abcc03118cd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2828
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Added more comments for clarity.
Moved namespace size calculation to the clean_up() function.
Changed size calculation from nvmcap (id-ns) to tnvmcap (id-ctrlr).
There is noneed to cache the size before deleting namespace,
if we assume that all devices had single namespace encompassing the
whole device.
Changed blocksize from 512 to 4k. All devices in CI should support that,
and usually thats the default.
This could be further improved by reading LBAF and checking the Relative
Performance (RP), but that would convolute the test scripts. This
is good enough.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8a38d00ae1442edf5480e4e72a8a8aa90380cd79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
It is already assumed that enviroment was prepared,
setup.sh ran binding the drives.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I864590b57db880b33c7b32deba8d38e4d5637b5b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2825
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used couple times in cuse test, so move it to common script.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e9f973e7fb53b0024fb320d37632e1e011ba3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2824
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This will help with managing the test execution and preparation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0bd3612381d031a4015335d162f1296fd6dd213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"nvme_cuse" name for run_test was already used by one
of the tests in nvme.sh.
This removes the naming conflict and will prepare for further
restructure of nvme-cuse tests, where "nvme_cuse" name will
encompass all cuse tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If141fe0ef492e0cde8e68490550de5d48fecb5e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This test changes the range of active namespaces and checks
if apropriate CUSE devices for namespaces was stopped/started
properly on CUSE update.
Change-Id: I9683a0ab6ff28328d4788c49a834cef31c0582cc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/780
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previous to this change it was possible to register
same nvme_io_msg_producer twice. This kind of functionality does
not make sense in current scope of it, as each message to/from
io_msg_producer does not have identifier other than this pointer.
In case of nvme_cuse this allowed creation of multiple /dev/spdk/nvme*
devices and caused an infinite loop when detaching an nvme controller.
This patch disallows that and adds test for nvme_cuse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5f56548d1bce878417323c12909d6970416d2020
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of refering to single controller, allow to point
and check different ones.
Next patch in series will verify lack of existance
of "/dev/spdk/nvme1".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9656ac06e86c8946b45b2ffc93119d31a1ccc5ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1979
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Couple of nvme_cuse RPC operations were done as part of
nvme-cli test cases. This patch moves those out to separate
script.
Next patches in series will expand those.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia3123939901368af3570b127230f828437f39ef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
