Most notably, crypto/sha.h was split into two separate header files,
crypto/sha1.h and crypto/sha2.h.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I43ae61034f743bf4aae7f2f29919eec92d851f01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Some time ago Qemu submodules links were changed to
use https:// instead of git:// so there's no need
to sed this.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If4b16e7b887af5028d208498da8d81c2fa2101d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6847
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Fork needed to run Vhost tests using vfio-user.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iedfa85083e51c08592c9f512c6650415b49deda8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6846
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tools from this package are needed to handle the RPMs build.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I516341e0917998eae9c54d3194f1e091f4e5e9df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The latest QAT driver version which we support attempts to define
pci_cleanup_aer_uncorrect_error_status() whenever <= 5.7.0 kernels
are detected. However, in case of centos8, the latest 4.18 build of
the kernel which is available there includes patches which completely
removed use of this call.
To make sure this function is not built into the driver, apply the
patch on top of QAT which will remove this definition entirely. This
patch is meant to be applied only in case <= 5.7.0 kernel are picked
up and which are missing pci_cleanup_aer_uncorrect_error_status()
symbol definitions.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ieb09d5a1dc8936d6e266c6cadfdf9d70620a3bca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
!Do not merge this patch before RocksDB patches are merged:
https: //review.spdk.io/gerrit/c/spdk/rocksdb/+/6485
https: //review.spdk.io/gerrit/c/spdk/rocksdb/+/6486
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie13ff102ddf627026013dcb8b41cb3ee205eaaeb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows other entities to source pkgdep/git and safely use other
available routines.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I81c87ef124bdfc6d8cc548bc3a0ff4c19867c232
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6339
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Needed as depending on the kernel version given system is running under,
some E800 controllers may not be supported.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic3ac24e24c68d62fecd702170f0bccc7176da8cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
12.2 FreeBSD release has problems with building spdk with 3.19 fio
vm_setup.sh provides. Instead of patching anything, simply ignore the
warnings.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1d85320126d664c7ed45ee369612391cfba8fd06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6405
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
We don't typically "describe" our releases and it seems
that last LTS (20.01.2) was described by accident,
so this script worked. Fix it for 21.01 LTS.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I2e64380299cd1a4aeaf21f324890d9257efdaea3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6244
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Users can use "--with-vfio-user" to enable it when testing it.
For CI configuration, we add a new test flag SPDK_TEST_VFIOUSER
to enable CI tests.
Change-Id: Id284df721171d01cc52491ebf4088bcc17eee147
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6139
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
igb_uio was removed from dpdk 20.11 and moved to
a separate repository:
http://doc.dpdk.org/guides/rel_notes/release_20_11.html
Because of that igb_uio module does not build as part
of dpdk meson build, and we have to build and install
it ourselves as part of test dependencies.
Change-Id: I4081bc3b0233ebaf5dbf926665edf28fa3463fbe
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6006
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This attempts to mimic commit 2a860943b8 from DPDK repo to pass the
build under make 4.3. Currently, this affects Fedora33 which ships
with make 4.3 by default.
Change-Id: If3afa8ad9200d618f43bbea42360efbfe99d3085
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5779
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done in order to workaround currently existing issues with
building spdk_abi_lts on systems with newer versions of the compiler.
Change-Id: I514580308f2cfbbffa13a821dcf72fc9fb60cd73
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5716
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8b7777a89491b45ba785629679a34e0aa22f7e61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
--force will make sure that all pre-existing tags will be overwritten
with those from remote (this concerns mostly LTS tag which is meant
to be changed in the future to point at different releases). Cleanup
is also necessary as we can't build against repos with old contents.
Change-Id: I9f8c5521d828bed04ea1dc23fb8f3bf07aad1f23
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Since --tags also works with lightweight tags, it simply returns "LTS"
string when tree is switched directly to that particular tag. Make sure
only annotated tags are checked so the release version lookup can work
as expected.
Change-Id: Ica875bf406c8e23529ee2961645c5bf6b6bc00fa
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It seems that some of the kernel patches from 5.x were backported
to centos8's 4.18 kernel. This requires 0001-pci_aer.patch to be
applied on the QAT source. To determine if it's needed, check list
of exported kernel symbols to see if said patch is needed since
relying on version check is not enough in this case.
Change-Id: I9fb24480058817ef9f4dd246eff234a95ce65137
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
.dk doesn't seem to be stable, quite frequent timeouts can be seen
while cloning the repo. Use github instead.
Change-Id: I9c3a4f4e2deea94a7d7d69a33cc50a64df072d4b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Reference builds created by vm_setup.sh script are
needed when executing ABI tests. So far vm_setup.sh
only built reference build for previous release, but
in some cases a LTS build might be needed as well.
Also rename latest ABI reference build directory to
spdk_abi_latest, because that's the name of directory
used in test/make/check_so_deps.sh.
Change-Id: I1cb3e39e96d68051d4142753db5b8b3645016eeb
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5025
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
We don't use this script to create qcow2 images for our tests in CI.
Also this script is using random vagrant box images, and we don't know
what is inside them.
Script maintenance is a tedious affair because fedora boxes use xfs file
system, and we can not shrink them virtual disk to minimal size, and this
will caused fails in tests in future.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b35f16bbfd6135377995f7b20e1402d14b2b1b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also, disable docs building since it fails on newer GCCs (>=10).
Last but not least, move all the -Wno-error flags to a separate
array to make code a bit clearer.
Change-Id: Ieb6d30778140c745a8c9f0ccd83bf4acd3a0acd5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5004
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
f62834a6bb forgot to actually retrieve version string. Also, use
common function for comparing the strings.
Change-Id: I022ab54ea5b4edf0b596776dd35ca8637506ee46
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4833
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I11b4bb2a0db20e6f86749cd951221a3697a72ed6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2866994df8a5f268d7dea2154e0df87786397142
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As stated in a66c52fd this is racy and also masks out all potential
failures since wait() will not indicate if all processes succeded
or failed, it will return only with exit status from the last
process it handled.
Change-Id: I9e2b5d01ac8f951082e0b28eeae5455ecd0c8e74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Newer compilers (gcc 10.x) shipped with, e.g., Clearlinux, Fedora32,
will simply fail upon hitting this error. Ignore it.
CPPFLAGS is used since CFLAGS would override its default options
defined in a Makefile breaking compilation on older gccs as a result.
Change-Id: I75c7938268736365a41b49373c948e779d57253b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are not understood by the older versions of the compiler, like
the one shipped with Centos7. The flags in question are:
-Wno-stringop-truncation
-Wno-unknown-warning-option
Change-Id: Icc29ebcf5080c908e23aa2df290a6c452f3e185c
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recent changes regarding CUSE and BLOBFS tests have not been reflected
in config used for buidling refspdk and the one created by vm_setup.sh.
See https://review.spdk.io/gerrit/c/spdk/spdk/+/3747 for details.
Also, add SPDK_TEST_URING since it's used by CI as well but missing
from config generated by the SPDK tooling.
Change-Id: I59f8e6521094765190f7f30dc923b185c6be9ebf
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Mellanox Build Bot
Due to a typo from c7d1abba18 the installation was being skipped
regardless. Also, according to:
https://docs.01.org/clearlinux/latest/reference/bundles/bundles.html
"tsocks" package is not available in the clearlinux bundles hence
there's no need to waste cycles on trying to install it at all.
Change-Id: I1edc877ed660e1262aaa1d5b308cf4f9e23daf8a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4459
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mellanox Build Bot
All of these packages are not available on some distros, e.g.
Clearlinux.
Change-Id: I9045681586992c602ff7c95a0caca739e548ab60
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Mellanox Build Bot
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Idd43435d10ff54bb091a4a35cd0d803c7e62caf0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4278
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default, git will use path relative to the prefix it was built
with to determine location of git{config,attributes} files. In
our case, that would be /usr/local/git/etc.
Lack of this directory may be problematic for vagrant's proxyconf
plugin. If it picks up git binary at our location, it will depend
on existance of the /usr/local/git/etc directory. In case it's
missing it simply fails as git won't create it on its own. To
avoid that, let's create it ourselves.
Change-Id: Ie1fadd36d5888866b20375a7184031c73058fe3d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Instead, define $ID, $VERSION_ID on our own based on FreeBSD's
version we are running on - 69d5d77bfb added etc_os-release package
as a pkg dependency so this change makes sure we have a chance to
actually install it.
Change-Id: I09b350ce3ae3f7c5d2f998f3d251f50e1277f846
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Since refspdk has its source built, we should give it a chance to
avoid any potential issues with missing dependencies. To do that,
let's run it at the very end after all other sources were already
put in place (this is mainly relevant to FreeBSD where cmdline
for ./configure is hardcoded).
Change-Id: Ic07129c7b879eff7fddd734c9c4a6787df3da7ec
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This would unecessarily print out usage() and call exit which wouldn't
be respected since all sources (except {,ref}spdk) are installed in the
background anyway.
Also, since std{out,err} may be bloated with bunch of messages comming
from different sources, explicitly mention Vagrant name in the echo.
Change-Id: I737f5cf08d6ae3d2d494add143d1dfaf89beeead
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
On Linux, these two options have the same meaning, however, on FreeBSD
systems -r is treated as -RL. This dereferences all the symlinks copying
directly files they point at. This doesn't work very well with git since
it will detect that as a type change, aborting following checkout.
Use -R to make sure all special files are properly copied as well.
Change-Id: Ib066896cf730b0906bcd30449f1e98a31d70ff31
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic93b83dab25957bd3d99527fccb9374f4f23d110
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4184
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Remove LIBRXE_INSTALL from pkgdep/apt-get because we dont use it any more.
Move ibverbs-utils and rdmacm-utils to package list for allway install in vm_setup.sh
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I0b0952bb898802a7f69460f7d6b2f41be3d82572
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add option to install vagrant and it's plugins
required to run SPDK test VMs'.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I89c9802ebb80bd411ebe93dbc98e54fb32779e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3576
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
vm_setup.sh currently depends on package managers to determine which
SPDK dependencies must be installed, however, this may cause issues on
systems which provide more than one package manager, e.g., dnf and
yum. Due to that fact, some packages were missing since they were
bound to a specific package manager instead of the distribution, case
and point, nbd. Also, some OS-dependent steps had to be duplicated,
like repo refresh on Centos8, since either of the managers could be
in use.
To address the above, allow for souring of OS-based routines to
overwrite defaults set based on given package manager.
Change-Id: I0d8d88dea4521e9c76b187c69743e4e09aa724e6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The d09acccf changed the order in which dnf, yum managers are picked
up, however, the refresh step was not moved to dnf which actually is
by default shipped with Centos8. Simply add the missing step.
Change-Id: I6f845d794b79ff01d4abfff098b0b29a9c489189
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The former was dropped and merged with crypto/sha.h in kernel 5.8.
Change-Id: I9005592feacc71c9a0e80f06b5de2d65a6bc06d9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4030
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
btrfs-progs and xfsprofs are required by some of the tests, e.g.
the nvmf/target/filesystem.sh.
abigail package provides abidiff needed for check_so_deps.sh tests.
Change-Id: I5199fafef2ac03ce04ea3709e9ff76fefa1ac717
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2923
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Get rid of WITH_DPDK_DIR and SPDK_RUN_INSTALLED_DPDK,
introduce SPDK_RUN_EXTERNAL_DPDK which can point to
a DPDK dir. It's an empty string by default.
Change-Id: Iff2b3773a4614db07f4196165087a79472e02b9a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/867
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make sure that we patch only a specific version of the driver that
we know works with given patches.
Check if $DRIVER_LOCATION_QAT looks like something we know and
proceed with patching if it does.
Change-Id: I27d82793ecfd6ad4cfb625cf14fcdda9fe822856
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3507
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The pci_cleanup_aer_uncorrect_error_status() was renamed to
pci_aer_clear_nonfatal_status() in kernel 5.7, details here:
git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=894020fdd88c1e9a74c60b67c0f19f1c7696ba2f
Change-Id: I233718e02d95f46ccef4d78a4d1f626950cd8503
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3506
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
timespec and other time related types were hidden in 5.6 kernel,
details here:
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c766d1472c70d25ad475cf56042af1652e792b23
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=412c53a680a97cb1ae2c0ab60230e193bee86387
Change-Id: I02ed16f9047337c77cc9ad344bbb40c52b3202be
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3505
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is done as a preperation for oncoming patches which will
require additional pieces of the kernel version to work with.
Change-Id: I365201d8254ee68a0201790dff29474545a4f50a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3504
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch is not needed for the newer version of the QAT driver which
vm_setup.sh installs - it successfully compiles against older kernels
(tested against 4.4.x sources).
Change-Id: Icd3e3171ddcdc1b5e4eb7c45736461cfcaa86cf7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3503
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Some images (especially cloud/containers) may do not
contain this package in default. So we need to add this package
install support.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2620026534009e8b6c320ecf61b8970947d5a9fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3218
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
VPP is going to be deprecated in 20.07, thus remove support for it
from vm_setup.sh.
Change-Id: Ic5891178bc439ff08475adbb2925b81c4a33525f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3199
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Accidentally, checkout command was included in said path, remove it.
Change-Id: I3d497b90552ddcc14be4a45b8794f79e185cfb9f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3196
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It is possible to have yum on Fedora (either manual install
or via upgrade), yet dnf is the default pkg manager there.
Re-order the list of checks to pick dnf first if available.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I48dfda2a248a7798c9d0c8b3cb4b8a3aa615e2a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Exit early from script execution when unsupported pkg manager is found.
Just not before the "--help" has a chance to be called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I176bf5778dd7b2bc510f54842202113c8614a9d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3054
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When trying to find out parameters through "--help",
the $PACKAGEMNG is "undefined".
So the output from help does not make sense.
Change it so that the help message uses $package_manager that
was detected.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia7ac47dec810588dfa01441b35204a7bf13280ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3049
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The 65b8c30d meant to use exec as a mean to "reload" the running
shell, however, exec simply replaces running bin image with a new
one, in this case, another shell. Since this call doesn't return
(unless it fails) this would suddenly leave the caller of the
vm_setup.sh inside the interactive shell.
Instead of re-executing the shell, simply export new PATH pointing
at where new git binary should reside.
Change-Id: I9ab5ba7f8f88602160c8be0f017477e0d1a01c08
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This mainly concerns QEMU compilation. For system which have installed
tsocks, vm_setup.sh always tries to pass --with-git to QEMU's configure
even when tsocks is not really used (it determines that based on $CONF
which by default has tsocks enabled and presence of the tsocks binary).
Since in that scenario qemu compilation would simply fail, allow user
to force vm_setup.sh into simply ignoring tsocks alltogether.
This is an alternative for a change which potentially could break the
compatibility by removing tsocks from default $CONF list (I guess there
may be some systems out there that relay on tsocks and its default setup
in the $CONF).
Change-Id: Id3583357878002c79e1a554df664c297a0e39cb3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Since most of the sources are executed in a background, there's a
race happening between different instances of package maangers
which are called to install extra packages (for QAT and QEMU).
This mainly concerns apt-get which will not wait for locks on
given files to be released, it simply exits when they are still
held.
To avoid this, simply install all the extra packages from a separate
function before calling routine for a given source.
Running these builds in a background is still not safe in that regard,
since code of the actual source may want to perform a similar tasks,
however, this patch should at least mitigate the issue in its current
form.
Change-Id: Iede83793e1cc739cd3bc5dd4dee90f9c81d55f63
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
In case vm_setup.sh is called on a bare system (e.g. cloud image), it
will instantly fail since gcc won't be on board, forcing user to either
install it by itself or by running our pkgdep.sh first.
Moving this check to pkgdep/git will mitigate similar issues since
before it's sourced, an $INSTALL portion of the script will have a
chance to run pkgdep.sh on its own (this still depends on user running
vm_setup.sh with -i arg, but still ;)).
Change-Id: I309ca42e8ea15fd14e416fc85fa0e244de2d8262
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Make sure that environment is preserved for each call to sudo to, e.g.
make sure proxy configuration is not lost when executing given package
manager.
Change-Id: If221d8d6546fc0ae4f02bc5814b6688c6d78cdd6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Allow to specify a target place for all the git sources and use it
as a full path (instead of cding directly into $HOME). $HOME is
still kept as a default.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idb60ff8f8108368de2ac241971d221142198c89a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2528
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I59030c4570a03f8c6dfcf4a5f86426e3b5875744
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Perform it inside the a copy instead.
Also, don't copy the repo if target directory already exists.
Change-Id: Icdff80c978c7a8998b113db27bf744503bb29d0f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done in order to not taint the rest of the environment with
autotest settings.
Change-Id: Iad31096aa29d4893200e64c77f2cf22663f0dfc7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2524
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The selected options are based on how CI runs the make test.
Change-Id: I71d7bc13250f0f4b5212eff4d13794979bcd4b6d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Neither Debian or Ubuntu have qemu-img in their package repos. The
actual qemu-img tool comes with qemu-utils instead.
Change-Id: Id7cd538144850f3e2da47e279c9f10d5e7179617
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifdaf1e03e82a3167d994945661d9e5f0fba9224e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes introduced by 9307ff5a are applicable to Fedora 31 too, thus
use the very same copy of the patch while compiling vpp on that
version of the system.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4445497f928a1a509c5adbccfe244ff9eef7275b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib894655d69c507c4dbc3aebd72105eb85737e16d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Currently, Ubuntu 20.04 exposes btrfs-tools under different name,
btrfs-progs. Be nice and fallback to that package name if btrfs-tools
installation fails.
Change-Id: I78d51b081069b252c59b13d2347cdd077938131a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2671
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It was targeted only for Fedora 26 and this particular version reached
its EOL two years ago. Additionally, new version of the iscsiadm tool
was relased since (as part of the iscsi-initiator-utils package).
Change-Id: I14136e98b378f0b44a4a43c5ae7a129cf8f7c306
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Currently used fork of nvme-cli (nvme-cli v1.8 with our patch)
doesn't work well with namespace manage feature (e.g. namespace
deletion or working with NSID=0xffffffff). These problems seems
to be fixed in later versions of nvme-cli (v1.11.1 for now).
Nvme-cli tool must be patched to support namespace devices
exposed as character devices. Required modification is
already merged with current nvme-cli master in
commit: e770466615096a6d41f038a28819b00bc3078e1d
and hopefully will be available in the next release of nvme-cli
(>1.11.1).
Next steps would be:
1) Change the commit hash to a release that includes mentioned
patch.
2) Drop the compilation when system repos contain the right
release.
Change-Id: I07846cba955e580f5a8861ad4c7e50e7f4adccfb
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2417
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch updates the suggested branch to 5.0.0,
which at this time contain all necessary patches to run
FTL tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idddea7154565f710a8325ec73de98cfe52e6ab8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Since gcc 9.* can be used across different distribution, the old check
no longer applies. Instead of looking for ArchLinux, check the gcc's
version directly to make sure proper options are added regardless of
the distribution (.e.g. Fedora{30,31} is also shipped with gcc 9.* at
the moment).
Change-Id: Ic493f411e8d886cae9bd5e2f389cb632d7b9f98a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2432
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Use already cloned sources in spdk_repo/spdk and
create a reference build.
SKIP_ABI_TEST flag is deliberately not added to
autotest_common.sh because of it's one-time use here.
Otherwise autobuild.sh would fail if vm_setup.sh is
run for the first time on the system. There would
be no previous reference builds to use.
Change-Id: I0c32041321ca25b91acb498f852ef14e7869daf1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
"make configure" was missing.
Run "exec $SHELL" to reload current shell and use
new git thanks to updated PATH.
Change-Id: Ia92a6a3ce3ccf515a23353d91b8cde3a13b7c92b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1997
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Couple of reasons here:
- "install" should run first, as it runs pkgdep.sh which
actually installs git for all distros.
- Because of that we can remove ArchLinux and Centos7
git installation with package manager - this is already
covered by pkgdep.sh.
- install_git routine relies on wget and autoconf, which
have to be installed first.
- install_git routine (which actually upgrades git on
Centos7) makes it possible to use "git -C". Default
1.85 git version on that system does not support that.
Change-Id: I1422f8c2a1c49eb38f4253909a152a7bc99b173f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1995
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This might be a bit confusing, but it seems some of the
distributions using "minimal" install do not come with
wget installed, and it is used frequently in our provisioning
scripts. I stumbled upon this issue with Centos7, but am
adding wget for all distros, just to be sure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9621d5ce92014623d76d70c9e22d9eefa9ea0203
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1994
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is fail during install using vm_setup.sh:
Error: Failed to synchronize cache for repo 'AppStream'
adding yum update on instalation begining fix this issue.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I92a3298d332ffe94c63a4f007e480a0c4d529b00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Parted is not installed in the system by default and
is needed by number of spdk tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5d8628be2e328d528a8aa47a8084d33fbb63b187
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we have OCF as a submodule, we do not need to
install it separately.
vm_setup.sh was used to install dependencies for testing SPDK,
so remove all references to OCF in the vm_setup.sh.
This is related to issue #1279
Change-Id: I616dd6e72101c78c6902603ef077eb7992809ab9
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1496
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Nbd package will enable tests that uses them.
Python2 is outdated. Python3 should be available.
Change-Id: I244c82b8ab2b8e4217dfb814f69882b2963fac70
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Update QAT link to latest version.
Previous version does not compile on kernels 5.5+ and gcc 9.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I115f6ead9ccc40a08774a1508b19a8ac7572845e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1476
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test in event.sh take 5 seconds on CI at this time.
For the tests to run both SPDK_RUN_FUNCTIONAL_TEST
and SPDK_TEST_EVENT had to be enabled.
This served as very minor time saver, so removing
this flag shouldn't affter test times more that the
5 seconds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3eaa587daf28b2efbc3cfdff5ad648b7529e7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Building "--with-shared" is tested in autobuild_test_suite
when SPDK_TEST_AUTOBUILD is enabled.
SPDK_BUILD_SHARED_OBJECT can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I05b1d04c3e28ce72c0a4a6deb89d0b6d02e2bb67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The fedora machines running unit tests will require this package to run
the ABI compliance checking tests.
Change-Id: I9f9307c04e235cb9b6f78c4908609a529a86ccba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1137
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, this particular package is not available in fedora 31's
repos, thus don't exit the setup if its installation fails.
Change-Id: I56852ed172c95b23c92e25b1cec391b4e909f2bd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/936
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since '' are placed within "" they are treated as literal part of the
argument passed to configure. Due to that, configure fails to run cc
since all -W flags are treated as one.
Change-Id: I69e182f308628cc5b63bd363d3a47cf87336a59a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1024
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
MD026 Trailing punctuation in header
This rule is triggered on any header that has a
punctuation character as the last character in the line
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ab4894092ef6b5f920d89b74e43c2e46e9581c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
MD022 Headers should be surrounded by blank lines
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I768324b00fc684c254aff6a85b93d9aed7a0cee5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"MD032 Lists should be surrounded by blank lines"
Fix this markdown linter error by inserting newlines or
adjusting text to list points using spaces.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I09e1f021b8e95e0c6c58c393d7ecc11ce61c3132
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/434
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We have added a lot of flags to this script over time to try and shorten
parts of it that take a long time or modify the way we make and
whatnot.
In the test framework today we really have two settings, we either want
to run the entire autobuild package with all the bells and whistles, or
we just want to make the code and get on with the rest of the tests. I
believe this change can save between 1 and 3 minutes on each of the
functional test suites.
Change-Id: I7519e8320aa16b57f09f633f866dc36cb494aa80
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Whole autotest fails on VM Fedora31
GH #1081
Fio version update to fio-3.15
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3b91c426050eb30af6b58434b6219090c61a48ba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476893
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Dependencies required to compile and run nvme-cli tests:
1) fuse module must be installed,
2) cuse module must be installed,
a. Fedora requires to install "kernel-modules-extra" providing
cuse module for a kernel,
3) systemd-devel package to compile nvme-cli application
While namespace devices are provided as character devices via cuse
module, this patch also installs nvme-cli version accepting namespaces
as character devices.
Required changes are available for review here:
https://review.gerrithub.io/c/spdk/nvme-cli/+/472250
After merging the changes will be available on spdk/nvme-cli
repository at 'nvme-cuse' branch.
NOTE: changes above are not required when controller with nsid is
provided as an nvme-cli option,
e.g.
"nvme id-ns /dev/spdk/nvme0 -n 1"
instead of:
"nvme id-ns /dev/spdk/nvme0n1"
Change-Id: I413c33d9891c5a39a5388ea7407d798c138b0584
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472024
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The = here is literal. To assign by index, use ( [index]=value )
with no spaces. To keep as literal, quote it.
Change-Id: I14cada0e8c132286959aa47a1d37ede5e025d85f
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Dependencies install with -i option works OK.
Additional dependencies with -t option:
- rocksdb - OK
- librxe - OK
- iscsi - OK
- ocf - OK
- flamegraph - OK
- tsocks - OK
- nvmecli - OK
- fio - compilation errors on version 3.3
OK if updated to 3.15
- qemu - OK, but need to disable some error warnings:
-Wno-error=stringop-truncation
-Wno-error=deprecated-declarations
-Wno-error=incompatible-pointer-types
-Wno-error=format-truncation
- qat - not run
- vpp - not run
- libiscsi - compilation errors
Change-Id: Ifde26c1f1d35c8fe06e18ddba33fe2d054b6d2cf
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466948
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update to version currently used on test systems.
Change-Id: Idbc12f0dd089dbe4b0919a936eac8a36020c3994
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465665
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Before this patch scripts/docs based on tip of 19.04 VPP stable branch,
because VPP 19.04.2 was not yet released at the time of implementation merge.
Now that VPP 19.04.2 was released, we change to actual release tag.
In order to prevent using untested commit, if new patches were to be merged
on top of VPP 19.04 stable branch.
Change-Id: Id3584a13c48eba25b061ae7a6fc51e477a6425c5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates net/vpp implementation from version VPP 19.01 to
VPP 19.04.
1. Some binary APIs are deprecated in 19.04 and message queue is used
to handle control events:
- vl_api_bind_sock_reply_t_handler by SESSION_CTRL_EVT_BOUND,
- vl_api_unbind_sock_reply_t_handler by SESSION_CTRL_EVT_UNLISTEN_REPLY,
- vl_api_accept_session_t_handler by SESSION_CTRL_EVT_ACCEPTED,
- vl_api_connect_session_reply_t_handler by SESSION_CTRL_EVT_CONNECTED,
- vl_api_disconnect_session_t_handler by SESSION_CTRL_EVT_DISCONNECTED,
- vl_api_reset_session_t_handler by SESSION_CTRL_EVT_RESET
2. Fixes for Fedora 29/30:
- added "-Wno-address-of-packed-member" (DPDK 19.02 fails to compile
with gcc9.1),
- force "-maes" compile flag for gcc9.1 to compile crypto_ia32 and
crypto_ipsecmb plugins (gcc9.1 doesn't do that for -march=silvermont)
- some minor fixes
3. Default path for VPP instalation is changed for test scripts from
/usr/local/src/vpp to /usr/local/src/vpp-19.04 to avoid VPP version
conflict.
Change-Id: I1d20ad7f138f5086ba7fab41d77d86f8139d038e
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459113
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We only need the fork for OCSSD tests. And eventually we won't
even need that.
Change-Id: I0f52c44f504435a3bab2f478664a88ba6acfe464
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459960
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Also update two scripts from spdk/test which we previously missed.
Change-Id: I429f9bc158076462b419fae597f716c329f9b7aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NOTE:
Due to some changes in VPP two cherry-picks from newer version of VPP
(at least 19.04):
"sock api: allow to start client with no rx_thread"
commit: 97dcf5bd26ca6de580943f5d39681f0144782c3d
"dlmalloc: honor 8 byte alignment requests"
commit: f5dc9fbf814865b31b52b20f5bf959e9ff818b25
These commits are already merged in VPP 19.04.
This patch includes also workaround for VPP 19.01.1 to prevent closing
sessions to already closed applications after timeout. It causes
intermittent segfaults.
This is temporal solution and should be solved with next releases of
VPP, but is required now to create more stable VPP environment.
Change-Id: If4b45b7159819cfd836dd7d50f333dbab2b38eab
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456462
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Missing dependency libudev-devel. If not installed then
./cofnigure fails with:
checking for libudev.h... no
configure: error:
udev headers required
Change-Id: I53c8f522cbc8eb1e6b461fd78c0bf3305bfb09b9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Our test destination code of spdk is rsynced from host.
former link address of spdk "https://review.gerrithub.io/spdk/spdk"
is not very fast and always failed .
So changed to "https://github.com/spdk/spdk.git" ,this spdk just for
excuting start testing command.
Change-Id: I26b5c1556d8068becd5c5a94067cc64d9d32b5e6
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459223
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
