It is better if the internal of poller or thread is not accessed
outside lib/thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I80d488a111fd9a67a0da32d1e63695ce5a6bcb4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7776
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will introduce red black tree to manage
timed pollers efficiently but it will be based on macros available only
in lib/thread/thread.c. Hence then it will be difficult to expose the
internal of timed pollers tree outside the file. On the other hand,
we do not want to include JSON into the file.
Hence add a few SPDK internal APIs to iterate pollers list transparently.
For spdk_thread_get_next_active/timed/pause_poller(), we omit the parameter
thread and get it internally from poller->thread even if the names include
the term "thread". This will be slightly cleaner.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I000801a2e4dc42fa79801a2fd6f2b06e1b769c88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7717
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When do spdk_reactor_set_interrupt_mode, if reactor
already runs in the specific mode, directly call
callback function before return 0;
Change-Id: I1fd8b753e9881755aa128aabe6d1e2749e58b39b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7549
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The interrupt mode of spdk_thread can be operated
by reactor based on reactor's interrupt mode when
the spdk_thread is scheduled or the reactor is set
into interrupt mode.
Change-Id: Ibeef7ffb759589a7b372bd78e59e3410be061383
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All the other RPCs use underscores in the names of their fields, so
`framework_get_scheduler` should also use them instead of the spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I0e9edd7c59a4ab61643a7b558a2359e1805ed0b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modifies RPC "framework_get_reactors" to get core frequency for current
core and insert it into JSON response.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ibb9c25e6e1d28ddb4cde42baa20a7e9808652ae8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Currently _get_core_curr_freqs returns an index from the array
of available frequencies for given core. This change aims to
make this function execute what its name suggests.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I1143f692e7bbbf2f8f9e1cd4943f8e3ecd70ddea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the case that reactor is needed to be valid, add an
explicit assert there.
Change-Id: Ic47030d50a6a940ddf87a3744bae38c94dd7252e
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Move get_rusage directly into reactor_run(), then both
poll mode and interrupt mode can check rusage info.
Change-Id: Id5926752cfb19c13cb969fbfbb35f643e5d49d9a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
In interrupt mode, reactor spends its valid cpu cycles
to process registered thread interrupt function. So we
can count idle_tsc and busy_tsc in it, and update
reactor's last_tsc in it.
Change-Id: I65f4ae7d3b1e5c7c5c06937d6855f5d1b5c0349f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current update_core_mode is started from the next
core of the master core.
For futher's new scheduler, starting from master
core is required. This change won't impact current
schedulers' behavior.
Change-Id: Ibffd2c93a4288b5e87945ae523ccba88091c4031
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is an internal API used in several places. The call can fail, so
make sure it can report that correctly.
Change-Id: Iac0ed2c8299c9dd3d2556070278a2224c3807b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
max_delay_us was deprecated in SPDK 19.04.
config_file was deprecated in SPDK 20.10.
master_core/pci_blacklist/pci_whitelist were deprecated in SPDK 21.01.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8be4c347de58044a7c3d5b1329d96e47ce084b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In _set_thread_name, use pthread_setname_np as the default for
platforms that are not Linux or FreeBSD; it's the most common
'non-portable' pthread extension used to set the thread name.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ia841166f0537cd1303eded15bc7ef1a9f03e3b6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those spdk threads were neither used nor tracked in event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1becee6390e172a10e08754703e018f7c44e30df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This reverts commit 72eed604b4.
spdk_vhost_init() relies on having a thread on each reactor.
Without the revert, every vhost controller is created on the same
core and even passing --cpumask when creating does not affect it.
Proper fix would be to change spdk_vhost_init(),
but would require additional testing. For now revert the patch
that spawned always idle threads.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0dbd6c9fe1d9d23ada260da8fc7b48086223c632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
We want to avoid an active for_each_reactor operation
while the reactors are being shut down.
Fixes issue #1766
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30bc258c5b22545320080d269a1ed8cb0b4e12f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6104
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
dpdk_governor (and therefore scheduler_dynamic) use DPDK
env. It should not be compiled in non-DPDK env.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I6b7cf15cf7383e6c1e77bfb188b24cabcc1f0fe1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6102
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using reactor once insteads of target to fix this warning.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I30cd6be26669fe1b2c5d694c15bfda223efd3b85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When using interrupt mode we can have a situation
when we create thread (which is always busy) with
a particular core mask, but this thread will be
scheduled for different core, because core
pointed by thread mask is in interrupt mode.
This thread will never be moved by scheduler
to correct core because currently scheduler
do not move busy threads.
This change makes scheduler to move busy threads
if their mask do not match core on which they
are executed currently.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I35abdc91b197f1b9d40e491f964d31debad72fa5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6073
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function will be useful in upcoming patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I2a79305b8cb155a94c83b4baa3f5d7014cb602c9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6079
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Save CPU resources by switching reactors w/o any
threads to interrupt mode.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibd1c1d50d1f6c6d7ed226d585e14999c2fd04621
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5456
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_reactor_set_interrupt_mode will send event to set
reactor into interrupt mode or poll mode, also set every
notify_cpuset on all reactors for consistency.
It can be used by RPC method or scheduler to set
reactor to interrupt mode while workload is lightweight.
Currently, this function is limited that the specific
reactor should have no attached spdk_thread.
Change-Id: I7e8f449bff1184b9a7948f80b9572066a19da60f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5853
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, spdk_thread can't get executed on reactor
which is in interrupt mode but interrupt of spdk_thread
is not enabled. So avoid schedule spdk_thread on it.
Change-Id: Ib37d1585f173ed3be8def83cd18aef65e287361c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each bit of the cpuset indicates whether a reactor
is going to be in interrupt mode.
Each spdk_cpuset is allocated to each reactor. So it
can only be touched by its reactor.
Change-Id: Ic186de341588b701d7471bf09336309d28b1bf4e
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When start spdk_tgt with json config file, if the file cannot be read,
there is no error message indicating what is wrong.
Change-Id: I4e0cbad5fb7a23b99f05ebdce7d0801eebbd63f7
Signed-off-by: Rui Chang <rui.chang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Those spdk threads were neither used or tracked in event framework.
Needed to edit hardcoded cpumask value in spdkcli test to accept any string.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieffea1bdf467f50ec0bd3af4b17a1d259fd876b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added rpc to get name and period of currently set spdk scheduler
and name of currently set spdk governor.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5562a81a7f9e4879bd48a765c9467f70b43f73ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5917
Community-CI: Broadcom CI
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be helpful in upcoming patches for changing
interrupt mode (when reactor have no threads).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I4902d0bd26f27db2b98dc4ca4fd4df934f59d9a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
We don't want to make main core 100% busy, so don't
move thread to it if thread busy time is higher than
main core idle time.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib521ac0d8959ec8062322ff7b2ad587d85ccada5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use DPDK based governor to change first core frequency
in dynamic scheduler. Core frequencies are adjusted
based on relative usages.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibeb9ca59fd67df27cfb0bfe752e66e5eef41b126
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This scheduler will group idle threads on first available
core and balance busy threads on other cores.
Change-Id: Ia0425c767dc3da2a66a9d82a20a0012fac83163c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3901
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This field will be used in upcoming patches
by scheduler to keep a history of threads
statistics. Base on those scheduler will
be able to calculate how busy a thread is.
Also we have to save the value of this field
while rescheduling thread.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Iffbd1f946e1d159ec7277a39bc30161e71722456
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Size of g_reactors allocated is g_reactor_count, so
valid lcore should be less than g_reactor_count.
Change-Id: I9d5cde7856d6b400a7188631812b53a7e5701d0f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Record result of spdk_env_get_last_core() to
g_reactor_count, since spdk_env_get_last_core()
iterates through all core ids in a loop, it is
not so efficient.
Change-Id: I6bbbfec0bc25490bab33436c84fca3da6380cbe8
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
That is more inline with other places we
do things like this in SPDK. Also change
argument type to uint64_t.
Change-Id: Ie98f6c37bf53d583431ea9edd7d977075aeaa7a0
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by a scheduler while balancing threads
to get information how much busy a thread is.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib0e897a9bb5d2a71173f60cce7e1d442e67a57f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes issue where scheduler is not being
initialized on first set.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I881438955f08852fb72187a2b92c7acfb12cd662
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Bdevperf shutdown_cb calls spdk_app_stop(0) directly.
But since json configuration also failed, spdk_rpc_initialize()
that calls spdk_app_stop, with -EINVAL. So subsystems are shutdown twice.
Adding a flag stopped in spdk_app to record the spdk_app status.
This confirms spdk app one start and one stop.
Meanwhile this fixes some SEGVS.
Fixes issue: #1731.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic3e36a458813a2d6bcf806de67ab691446b8d6fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This patch is used to support ABI compatability issue for spdk_app_opts.
Fixes#1484
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6fed777fa15b367f7c3706b8f218d86d56493906
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5330
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
master_core will still be available but deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6fe9eb7fecb2919795c439a02cb7d9d06a2774d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5358
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This helps us remove master/slave terminology from
SPDK and is aligned with similar changes made recently
in DPDK.
While updating nvme/identify to use the new member
name, also replace g_master_core there with g_main_core.
Other nvme utility usage of "master_core" will be updated
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ec4e3e9b644bec21b3729809bf5c4d35b10837f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5351
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These replace the pci-whitelist and pci-blacklist params
which are now deprecated.
pci-blocked will still use the -B short name. pci-allowed
will use a new -A short name.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icf1c46c40ad6a0f49fb539b18cdd8d0c8daac636
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The old pci_whitelist/pci_blacklist are now deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fddec0c90691dd385eb21d13be849247f144889
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5279
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously, trace file is always created in shared memory.
Adding disabling trace in order to avoid trace
file's creation if user doesn't require trace.
Also returning error if trace is disabled but trace rpc is
call to enable or diable trace group
Change-Id: Ic9ea781a8a1edd530d0a5921b0dc774356ae4d48
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5195
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A round of _reactors_scheduler_gather_metrics should be stopped
when there is calloc failure.
Change-Id: Ic2220c561abb07a849ea37d3c88af3f6d5d1ffa1
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4882
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Issue:
app.c:700:7: warning: Although the value stored to 'rc' is
used in the enclosing expression, the value is never actually read from 'rc'
if ((rc = app_setup_signal_handlers(opts)) != 0) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I4912d37c8300c88afc7668b792039683addc94c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4822
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just always put the config file name in json_config_file,
since we now only support JSON.
If user specifies both -c and --json, it will just take
the latter of the two. This is similar to if the user
specified --json twice.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc21d73acf0e190eda57a7b0c5d9bcfa14e87030
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4858
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Add RPC that allows to change scheduler at runtime.
Change-Id: I008670f5e936bc25a0fbc923b826277d15343273
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3958
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ide0ac38497bc500886e26fd219cb120113896966
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4152
Tested-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Features:
- does not delay thread creation
- does delay thread deletion
- singlethreaded, but can be made multithreaded.
By being singlethreaded, we don't waste time,
because reactors are not paused during rescheduling,
but we do make statistics less up to date
Change-Id: Ie5a7e8569bc32b3fd4bb887804dfbc3f5c2ea858
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3899
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move current scheduler to it's own module
and make use of new API.
Change-Id: I4928aed82603d51de01194c9650709e814f7f61b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4054
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add structures and function for new scheduler API.
Change-Id: I8e379db62189eb7c36092265c137f07368650e9b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4053
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Each reactor and each thread is assigned with one fd group.
At the same time, each thread is treated as one interrupt source
registered into its corresponding reactor.
The egrp function for reacotr is the only block point waiting
for events.
Change-Id: Id092e66591b07b445342f8ae16dc218d28887427
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All options -c, --config and --json are valid, but have to
point to JSON configuration file.
Adjusted UT since JSON configs don't work with --wait-for-rpc.
Since this removes last reference to legacy INI configuration,
updated conf library to no longer mention the deprecation.
All uses of conf library are for explicit reason and not
related to SPDK event framework configuration.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9a702465982daf715ce1c2ab863c48584734611
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove spdk_app_get_running_config() that allowed printing
legacy configuration by the apps.
Along with usr1_handler callback that was used to call that
function.
It was only used in iscsi_tgt so it is removed there.
The app_repeat test was using SIGUSR1 to trigger a
spdk_app_stop/spdk_app_start cycle. But we can use
SIGTERM for that instead. While here, do a bit of
cleanup in the app_repeat test app.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8449e8bcd979b237c68ef94f50fb7a3cb6c19db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4750
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes callback function for subsystems to
present their options for legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63076fc03eff45da5d57fab03501602922a20e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4749
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- Removed slew of conf.h includes
- No longer require mk vars that include conf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica7e8e8bf1d4a5d0b0200bfe689aa13afd77bfaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4746
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Legacy INI configuration is being removed this release.
This patch removes one of its options and always uses the
SPDK_APP_DPDK_DEFAULT_CORE_MASK as default core mask.
That can only be overwriten by -m/--cpumask arguments in app.
In bdevperf there was no reason to set reactor_mask to NULL,
as that was then still using the defaults.
Meanwhile bdev_svc will now check if user provided different
string via command line args to know if it should
unaffinitize its thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id882f8d7dbdd07b7743bd5981c37daa888b7872a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not needed. Add it to one of the UT where it
is needed though.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I06628184c22df68deffce3ca0561878569ccf3f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4717
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This issue was only seen in release builds since the
break was hidden under DEBUG. This seems to indicate
we aren't compiling release builds with -werror in
CI.
Fixes: 8a76c2484 (event/app: allow to enable log flag...)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5766af1d4a22f9269dd18c47d408a9d05b3ceb1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4714
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Log flags could also report on SPDK_LOG_INFO level by using
SPDK_INFOLOG() macro. Yet this did not result in additional
log due to check for debug build.
This patch allows release builds to use that flag.
Meanwhile the -L option besides turning on particular log flag
changes print log level to SPDK_LOG_DEBUG.
Applied changes to serveral applications to follow the
behaviour of event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0d6cce33263c350d6d83300d60e7d15bdfe4b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4557
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
This makes it more in line with other flags.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic44821318444dc2ea30771aba06201572ca7ef12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The log_rpc library serves little (if any) use in
isolation. It makes more sense to just include
this code in the event library. The event library
already depends on and uses the log library, and it
is natural to just enable these RPCs directly in
that library instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie39b8598ce0c06729a13d188ce00da44a996accc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
cpumask can be changed by spdk_thread_set_cpumask()
during the time that event takes before it arrives
on _schedule_thread() function, which would make the
function assert(false), even though that is ~ok~.
Currently, that can happen right after thread is created
or between two successive calls to spdk_thread_set_cpumask().
But most importantly, it will constantly happen if we
introduce rescheduler.
This patch just disables the check for now.
Change-Id: Ie6dfe22d6eff2c908c367d1311436cc6769a6960
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3905
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The variable can't be uninitialized, but gcc complains:
json_config.c:415:3: error: ‘params_len’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
spdk_json_write_val_raw(w, cfg.params->start, params_len);
Change-Id: I845dcc19fa18c3583c420e66c16c11a3fdf99ad4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3626
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When config entry fails spdk_json_decode_object(),
that basically means incorrectly formatted JSON config.
Decode object is simple enough here - 'method' and optional 'params'.
Before this change SPDK_ERRLOG printed garbage, rather than JSON
object that failed the decode.
We actually should not do it at all:
- the object is not formatted right already
- it might be the last object, so spdk_json_next() won't work
It was not usefull, so this patch removes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ife67ac0d9a1a66d567bfbdd5896e893f3e8cb3ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3257
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not all JSON methods require 'params' field to be supplied.
Verification of the JSON is done on server side in
parse_single_request().
We should not attempt to process garbage values on correct
JSON config file during app start.
Segfault can be observed if following valid JSON config is supplied:
{
"method": "framework_wait_init"
}
Resulting in:
json_config.c:388:13: runtime error: applying non-zero offset 18446744073709551600 to null pointer
AddressSanitizer:DEADLYSIGNAL
=================================================================
==3386067==ERROR: AddressSanitizer: SEGV on unknown address (pc 0x0000007260ff bp 0x7ffe6ea06890 sp 0x7ffe6ea067e0 T0)
==3386067==The signal is caused by a READ memory access.
==3386067==Hint: this fault was caused by a dereference of a high value address (see register values below). Dissassemble the provided pc to learn which register was used.
#0 0x7260ff in app_json_config_load_subsystem_config_entry /home/tzawadzk/spdk/lib/event/json_config.c:391
#1 0x7cbb13 in msg_queue_run_batch /home/tzawadzk/spdk/lib/thread/thread.c:505
#2 0x7cd00a in thread_poll /home/tzawadzk/spdk/lib/thread/thread.c:581
#3 0x7cfe18 in spdk_thread_poll /home/tzawadzk/spdk/lib/thread/thread.c:689
#4 0x71d6ef in _reactor_run /home/tzawadzk/spdk/lib/event/reactor.c:326
#5 0x71eb00 in reactor_run /home/tzawadzk/spdk/lib/event/reactor.c:382
#6 0x71f911 in spdk_reactors_start /home/tzawadzk/spdk/lib/event/reactor.c:477
#7 0x718237 in spdk_app_start /home/tzawadzk/spdk/lib/event/app.c:691
#8 0x407e94 in main /home/tzawadzk/spdk/app/spdk_tgt/spdk_tgt.c:120
#9 0x7f0f2eef2041 in __libc_start_main ../csu/libc-start.c:308
#10 0x4079ad in _start (/home/tzawadzk/spdk/build/bin/spdk_tgt+0x4079ad)
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7ef1a764467817ad788fdf5dbe17eaeb99dcc22e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3256
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With this patch, spdk_app_start/stop can be repeatedly
called by users based on their upper level application's
requirement.
Changes are:
* Add reinit ability inside spdk_env_init and related functions
* Clear g_shutdown_sig_received in spdk_app_setup_signal_handlers
* Clear malloc_disk_count in bdev_malloc_initialize
Change-Id: I2d7be52b0e4aac2cb6734cc1237ce72d33b6de0c
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2260
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
resp->error is usually a JSON object, but it was printed as
a string. For objects, resp->len was the number of fields in
this object, definitely not a length of the string to print.
There was usually just 3 characters printed with no newline.
To print this object we should stringify it using our json_write
library, so that's this patch does.
Before:
json_config.c: 192:rpc_client_poller: *ERROR*: error response: {"co
(missing newline at the end)
After:
[2020-06-19 13:33:57.060869] json_config.c: 220:rpc_client_poller:
*ERROR*: error response:
{
"code": -32601,
"message": "Method not found"
}
[2020-06-19 13:33:57.061067] app.c: 714:spdk_app_stop: *WARNING*:
spdk_app_stop'd on non-zero
Change-Id: I5d7aeba2b972782f18b8da0141ed4bfd79833f80
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Export iova-mode parameters in spdk which is useful in
VM environment.
Change-Id: I3f4756b2c3b6cf5d1964a50bbf63f9c596997696
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK_ERRLOG() uses spdk_log() procedure which is
customizable and redirectable, so it is preffered over fprintf.
It also prints source location which is useful.
Change-Id: I27574be4a774169f356ebd8dcdfd2a33a057f051
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1943
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In practice, the reactor pointers will never be NULL
in these cases, but some static analysis tools don't
realize that.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0657959e5572df2741398b179907f2bbf0b02b3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
This allows us to hide the implementations of
g_subsystems and s_subsystems_deps within the
libraries themselves.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I60716b9465b58d6cdb3a43262a7ded844bd80eda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1786
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is part of a larger effort to remove the g_subsystems and
g_subsystems_deps variables from the spdk_event map file. The
implementation of those variables should be internal to the
library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3c2c04933859c6c484a903e666df10f810b26709
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
Extract _spdk_thread_exit() from spdk_thread_exit() and
_spdk_thread_poll() calls _spdk_thread_exit() if the thread is in
the exiting state. spdk_thread_exit() changes to move the state to
the exiting state. The spdk_thread_poll() loop will end after the
thread moves to the exited state because the caller of
spdk_thread_poll() will check if the thread is in the exited state,
and break the loop if true.
If the user does not call spdk_thread_exit() explicitly, the reactor
has to terminate all existing threads at its shutdown. In this case,
multiple threads may have some dependency to release I/O channels or
unregister pollers. So the reactor has the large two loops, the first
loop calls spdk_thread_exit() on all threads, the second loop calls
spdk_thread_destroy() if exited or spdk_thread_poll() otherwise for
each thread until all threads are destroyed.
Besides, change the return value of spdk_thread_exit() to return
always 0. Keep it for ABI compatibility. Change ERRLOG to INFOLOG
for _spdk_thread_exit() because it is called repeatedly now. Remove
the check of I/O reference count from _spdk_thread_exit() because
_free_thread() cannot free I/O channel. Refine the unit test
accordingly.
Fixes issue #1288.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee5fb984a96bfac53110fe991dd994ded31dffa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the caller had to check if thread is not exited when
it calls spdk_thread_exit().
Subsequent patches will change return type of spdk_thread_exit()
to void, and so include the check int spdk_thread_exit() in this
patch.
If spdk_thread_exit() is called when the thread is already exited,
collect INFOLOG and return normally.
This will make the next patch a little easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8b94261575e770485b33c0b37e76e770b77b417c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
%*s prints at least * characters and may add padding to the string.
%.*s prints at most * characters.
In a few places we used the first instead of the second and
printed some garbage to screen (in the best case...).
Change-Id: I97a862be61a5e43aa61e8230044dbd64a9db33bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Collect elapsed time of each SPDK thread and add it to output of
framework_get_reactors RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2f0487de81720327428cda5738284a4ce2c557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch updates reactor to count thread run time correctly
on multiple SPDK threads per CPU core configuration by using
the refined spdk_thread_poll().
Add tsc_last to struct spdk_reactor to use the end time of the
last thread as the start time of the next thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21042867885d289ff0c23bf2a9ba6a8076a59673
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add thread_count to struct spdk_reactor to count number of threads
per reactor. This number will be used in the next patch to know
if all threads are idle or not for each reactor to support CPU
power saving.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f7cc5a6b78d85e9f8d0b539c60058c13e282759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It was too difficult for us to add unit test for _spdk_reactor_run()
because the main polling loop in _spdk_reactor_run() was infinite
if g_reactor_state is SPDK_REACTOR_STATE_RUNNING.
Factor out the main polling loop and rusage update in _spdk_reactor_run()
into a helper function reactor_run().
This improves the code readability as well.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia26db14f44026fefd696443227c16d2be4166832
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is a preparation to the next patch which factors out the main
polling loop of _spdk_reactor_run() into a helper function reactor_run().
One of the subsequent patches will support CPU power saving by
adding sleep into reactor_run(). We should not insert sleep between
the main polling loop and getrusage() because now is got before
entering the main polling loop.
To put getrusage() into reactor_run(), we need to maintain last_rusage
in struct spdk_reactor and maintain g_rusage_period as a global
variable. This patch does these changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61bf50de6a170ac73c8fe17e85077b90171dd9c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a flag resched to check if reschedule operation is requested
to struct spdk_lw_thread. Add _reactor_resquest_thread_reschedule()
to set the resched flag, and add it to the case SPDK_THREAD_OP_RESCHED
in spdk_reactor_thread_op(), and return true in the case
SPDK_THREAD_OP_RESCHED in spdk_reactor_thread_op_supported().
Then _spdk_reactor_run() checks if the resched flag is true for each
thread. If true, set the resched flag to false, and remove the
thread and call _reactor_schedule_thread(). Add continue to avoid
use-after-free issue for both reschedule and terminate cases.
This idea follows voluntary thread termination and will remove our
worries for all complicated rare cases.
Add unit test case to verify this update.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I656872d32dbb469ae70f771cd0419a77236bfe18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the prefix "spdk" from spdk_reactor_schedule_thread(), add
spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
For SPDK_THREAD_OP_NEW, spdk_reactor_thread_op() calls
_reactor_schedule_thread() and spdk_reactor_thread_op_supported()
returns true.
Then replace spdk_thread_lib_init() by spdk_thread_lib_init_ext()
with spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I232a3b2c6bcaf4d86b0dd3cefacd3e47eadda6d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the reactor main loop, _spdk_reactor_run(), check if both
spdk_thread_is_exited() and spdk_thread_is_idle() return true,
and if they are true, then remove it from the queue and call
spdk_thread_destroy() to delete it.
By previous patches, the exited thread does not accept any
new message or poller, all pending messages are processed, and
all unregistering pollers are completed. Hence we only need to
have very simple check in the reactor main loop.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib678245de98a5c050843e6435026bdcf8b6c75c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EINVAL if the thread is already
marked as exited. This will be helpful to detect wrong call sequence
of voluntary thread termination.
Besides, update reactor shutdown and unit test framework shutdown
to incorporate this change accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2296c61e273bf4d9580656dcbc2da0e8a8f3bcf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_enable_framework_monitor_context_switch and
spdk_reactor_framework_monitor_context_switch_enabled had been
a little long and not easy to get the meaning.
spdk_framework_enable_context_switch_monitor and
spdk_framework_context_switch_monitor_enabled will be a little
more concise, and hence change the names accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f1d50e8b62846cbd0f91b94f94cbaf16fefa39b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I18c260bb10bdf1c7aa5e00aa81a171f2ff50c7d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6dc29f591f7112512be8a67b180b056150f467b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This API will be used in the upcoming reactor_get_stats RPC first.
This API is not public but internal in SPDK. Add necessary unit test
together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I761ffe3c8d6d8da4594c0d728b479f9f40275fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Add check if reactor scheduled the thread to one of the allowed
cores correctly to _schedule_thread().
This check will be useful in the next patch and may be helpful
when we schedule SPDK thread dynamically.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibea8e8315187ae8a3a421007d8865bbee2d7e037
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the recent effort, use local instance of cpuset instead
of using cpuset pointer and allocating dynamically to it in
spdk_app_start(). This change will avoid potential out of memory
failure for application startup too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I22b529da13e893db16296167f2d8d4c296dec31f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
struct spdk_cpuset has been declared in the header file and
so we can allocate struct spdk_cpuset statically. This change will
avoid potential out of memory failure for reactor too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic5f4fdb493d73b4ae11cddd2638eeb84ebbb792e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478150
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_thread_poll returns only non-negative value now, and the return
code check is not reasonable now. For just in case we may want to add
assert(rc >= 0) but compiler gives warning because rc is not used anywhere.
So just remove checking return code check here.
We noticed first that spdk_thread_destroy was called without spdk_thread
exit but this change removes spdk_thread_destroy. So the issue is also
fixed together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e7f5c09faf5eda68ea8d42320dbefdca88bbd21
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now we don't provide #ifdef to users, SPDK_CACHE_LINE_SIZE is defined with 64 bytes.
Change-Id: I8ddb01a382008a3e333967650200c5aa8b93e09e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This returns true if all registered methods and aliases
are correct. False means that an error like one of the
following occurred:
- duplicate method with same name
- alias specified for non-existant method
- alias specified for another alias
Also plumb this so that incorrect RPCs cause an SPDK
application to exit.
Note: there are cases where this would have been helpful
during the recent RPC renaming.
Fixes issue #940.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I235a433c9b8c01e82f16288a8d295e96c54e4eb1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_reactors_fini() is unconditionally called in spdk_app_fini()
at the end of every application and it currently throws a ton
of warning messages if the reactors weren't initialized yet [1].
Let's silence those warnings.
[1] $ spdk_tgt -c invalid.conf
[...]
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
(Apparently SPDK_ENV_FOREACH_CORE iterates through 128 cores
if the dpdk env framework wasn't initialized. SPDK calls
spdk_reactor_get() on each core and that's what generates the
warnings)
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: Ic3a2355ef6d2e0d0e1cc125ba21cc6a802b355bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In SPDK applications, spdk_app_start() is always followed
by spdk_app_fini(), so remove all global-state cleanup from
app_start() and let it be done by app_fini().
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: Id9fda9fda92f16cc59565691489d4a5ab4c577a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Set g_spdk_app.config early in the app init function,
so that the subsequently called spdk_app_fini() will
free it. So far the dynamicaly allocated config object
would be just leaked.
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I19ffc8bc80858d954166649f825e573f83b4bf53
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Get all of the important stuff into the first cache line.
Change-Id: I5bbfb031bb1d693019abb9e5145579d0b867eaf5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Originally loading json_config using spdk_app_json_config_load_subsystem()
implied issuing start_subsystem_init RPC. This required a workaround
in the callback of RPC spdk_rpc_start_subsystem_init_cpl(), in order
to skip starting the app in json_config load path.
This made it difficult to load json_config without implicitly using
rest of the event framework. It will be usefull for example in
fio_plugin, which does not use the app.c API.
With change in this patch json_config load path directly calls
spdk_subsystem_init() C call.
Meanwhile start_subsystem_init RPC no longer needs a workaround
for json_config load path.
Change-Id: I535e079339cedaf0950767a8204002ab5885d8a5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Begin organizing file so setup operations appear
at the top.
Change-Id: I7411b4bf20480c8aeb40bc21b521e5d359f8da1f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There is a case in vhost where this occurs. Until that is
sorted out, just make this a warning.
Change-Id: Id021791e8cbddf3023e0cb1b8c52a733b3578a7d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466075
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These directories fit in with the module concept we are forming inside
of SPDK. Essentially modules are derivative or specialized libraries that
rely on a general or core library.
Change-Id: Ib40f05422f144ff8fd579f47a3867ef4412b3372
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465455
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
