per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the 4 digit year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.
Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This is the value after negotiation with the host.
Change-Id: Ifec843c7c2ff7d88ee3ccf26b942fcd084efda55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
get_log_page() had used cdata->nn as active ns count to allocate a
ANA log page. However, cdata->nn might be larger than the real active
ns count. Fix this potential issue.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ic71b29ad920f8393da7d7db0dab45e10e3268aec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13654
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Print string values for zone state and zone type.
Check for zone descriptor extension valid field before
printing the logs.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I3c5fa9a7a82f3fd6354c1430ec4f4c6259faeffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12869
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Add missing fields from identify controller data structure, for
admin command set attributes.
Update the identify examples file accordingly.
Ignore spdk_nvme_cdata_oacs ABI changes, only reserved fields were
changed. So this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I718e3647835a0706a33e7aa6bae774e133071f9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12866
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Add missing fields from identify controller data structure, for
controller capabilities and features
Update the identify examples file accordingly.
Ignore spdk_nvme_ctrlr_data ABI changes. Reserved fields
were changed, so this does not constitute an ABI/API breakage.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Change-Id: I12e622324bc1b0ebef95b854098bce133617051e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12865
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Althrough `rte_eal_cleanup` will be called in the destructor
function when exiting the application, it's OK not to call
`spdk_env_fini`, we still add this function call in case
there are cleanup function need to call in future.
Change-Id: I0a3eca44c5ed1d62059796ea8f1977fb19356939
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This API is a helper for getting the full discovery
log page from a discovery controller. It will read the
log page header to get the total number of entries,
allocate a buffer for all of the entries, and then
issue a series of get_log_page commands to read each
4KiB worth of entries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I02666ef5adcb9fc8825a221655811ace708f97b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10564
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I7a9ea6054b853bd1abe7cbf7c918a220b1234485
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9263
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the same fix as done for lib/nvme.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9ca5e1ea9dbdba45b51b311e9a36f278b1b62770
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8437
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bit 1 in the CMIC of the Identify Controller Data Structure specifies
if the NVM subsystem may have multiple controllers or not.
However, multi_host indicated a particular use case such that the NVM
subsystem is used by multiple hosts.
multi_ctrlr will be more appropriate.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0246096a5cc44721aeff3ff6f96473a2abe11964
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8719
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The P5800X drive will report the following error when getting Error Recovery
feature, according to the specification we should pass valid nsid.
nvme_qpair.c: 238:nvme_admin_qpair_print_command: *NOTICE*: GET FEATURES ERROR_RECOVERY cid:23 cdw10:00000005 PRP1 0x0 PRP2 0x0
nvme_qpair.c: 452:spdk_nvme_print_completion: *NOTICE*: INVALID NAMESPACE OR FORMAT (00/0b) qid:0 cid:23 cdw0:0 sqhd:000f p:1 m:0 dnr:1
get_feature(0x05) failed
Fix issue #1955
Change-Id: I30ce60cddcddbf78e57a8c172a2056a82ac72802
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8009
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This will help us to add get namespace features later.
Change-Id: I7e809cd9e3bcb3874ce141183b9c4ee82543616c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
When testing vfio-user target with QEMU, there is following error log:
ctrlr.c:2143:31: runtime error: member access within misaligned address 0x7fe526a73d98 for type 'struct spdk_nvme_ctrlr_data', which requires 16 byte alignment
For vfio-user transport, the memory buffer is allocated by clients, so
we can't assume the memory is always aligned, just remove the
aligned attribute.
Change-Id: Ie80530415013ebd7bcb8cdabca97d7d0e34857f9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some earlier NVMe drives don't implement Deallocate
Logical Block Feature(dlfeat) read value field, but
it can return zeroes in deallocated ranges, that's
the quirk NVME_QUIRK_READ_ZERO_AFTER_DEALLOCATE, so
here we use the API to cover earlier NVMe drives.
Change-Id: I6867618c60dd5488a5d4820d663da7f074af229c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7525
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This option may have been valid at one point, but is
not any longer. So remove it from the usage text.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I83747968085a77fb52d735026294bf5f82517ffc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When support for printing the zone report was added,
the zone report buffer was allocated using calloc().
This was intentionally changed to a malloc in commit
5ef79a17ec ("examples/nvme/identify: add an option to dump
the full zns zone report").
While we shouldn't need to zero the buffer, since the drive
should write the "Number of Zones" field in zone report header,
and we should never read zone descriptors beyond this value,
the ZNS spec also states that reading beyond the last zone
descriptor has undefined results.
Considering that "Number of Zones" field in the zone report
header will only represent the number of zone descriptors
in the buffer when the partial bit was set to true,
always use calloc(), to avoid the chance that someone might
copy this code and call spdk_nvme_zns_report_zones() with the
partial bit set to false.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia39c5235aa5c62a4ec42285f53f4bc80f7ec370f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7004
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For each active namespace, print the command set identifier.
This will work on namespaces that do not support or report a namespace
type, as spdk_nvme_ns_get_csi() will return SPDK_NVME_CSI_NVM for such
cases.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I05fa7fd6bb3d9ea32dac236c98baef90347094ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6905
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a workaround for issue #1799 that would require
a fix from Google Cloud Platform. GCP NVMe SSDs do
not support overlapped GET_FEATURE commands - the
cdw0 value on completions get mixed up.
On GCP the result is that identify app reports only
1 SQ/CQ supported when in fact it supports 16.
We can easily workaround this in the identify app by
submitting one GET_FEATURE and then polling for its
completion before submitting the next one.
We may consider reverting this in the future should GCP
provide a fix, but there is really no harm in keeping
this patch long term since this isn't an I/O path issue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I536033677a8364c955d562226e3feba4dbad0e07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Use the new function spdk_nvme_zns_ns_get_zone_size_sectors() where
it is appropriate (in comparison to the existing
spdk_nvme_zns_ns_get_zone_size() variant).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ic929ffbc5a1f4a16ba6719a985c05ae625caed46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6417
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add an optional limit, -z N, to the zone report dump option -z.
The variable g_zone_report_limit replaces the MAX_ZONE_DESC_ENTRIES such
that the maximum-number of zone-descriptors is overwritable. It also
replaces g_zone_report_full as it is represented by the limit-value 0,
e.g. "no limit" dump the full report.
The print of the section-header now includes the total amount of zones
and the limit. With this information, the header's width varies. A
helper-function, print_uline(), for printing an "underline" using a
given marker, is also added.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Ic8abead693ed83bb8612eef1f35605098ccade84
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6036
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Despite spdk_nvme_transport_id_parse() checking optarg for NULL, then
the Jenkins CI doing code-analysis fails with the error message:
"Null pointer passed as an argument to a 'nonnull' parameter"
This adds an assertion to satisfy the code-analysis.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I35f7ee659624c1d5a2abda91bccac9fb58393063
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Identify application prints the PMR details if it is supported
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Iaba4c15e18e1402035b11a34b2defe8078855751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6209
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixes: 5ef79a17ec (add an option to dump the full zns zone report)
max_zones_per_buf was only used in an assert. Per-patch
testing doesn't do a release build, so this wasn't found
until running nightly tests.
So rework the code a bit to print error message and exit
instead of this unexpected condition occurs.
While here, change another error message to use stderr
instead of stdout.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2c2893089cc82f76d7dd6b569952dd4a9f907ebc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5949
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a new option, -z, to dump the full zone report for
NVMe Zoned Namepaces.
Rather than allocating a buffer that can exactly hold the number
of zones we request, allocate a fixed size buffer of size MDTS.
That way, the controller will copy as many zones as it can,
while not exceeding the buffer. The nr_zones field in the
received report indicates the number of zones that were
successfully copied to the buffer.
The full zns zone report can be larger than MDTS, therefore
we now need to put the spdk_nvme_zns_report_zones() call
inside a loop.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If3ff84876289a491d0482e74c58c5a11de7e19df
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Exit after showing the help text.
If the user specifies -H, it is confusing that
the regular execution of the program continues,
which might mislead the user to think that the
option they specified is not taking effect.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I52d8e0f6c720c7ce1d66bddb99181babb12cef1f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This helps us remove master/slave terminology from
SPDK and is aligned with similar changes made recently
in DPDK.
While updating nvme/identify to use the new member
name, also replace g_master_core there with g_main_core.
Other nvme utility usage of "master_core" will be updated
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ec4e3e9b644bec21b3729809bf5c4d35b10837f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5351
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ifa558522437f4922b922abf17712173cb5ca1184
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5134
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Print the Zoned Namespace Command Set Specific data structures,
if the namespace/controller supports them.
spdk_nvme_zns_ctrlr_get_data() returns NULL for a controller
that does not support the ZNS specific controller data struct.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0acd2695976fc598b61591989f612db35ac821db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4839
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently, error handling code in examples/nvme/identify frees the qpair
before calling exit().
However, since every SPDK process starts off by triggering a reset
(in state NVME_CTRLR_STATE_INIT), which causes all the qpairs to be
deleted, there is not really a reason to do a nice cleanup on error.
Additionally, other examples, e.g. examples/nvme/hello_world does not
do a nice cleanup on error, so it is inconsistent if identify does so.
Proper freeing of the qpairs is still done in the normal case where
we don't get any errors (in this example, and in other examples).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0db612934464e6e84eaf466c12eb35eaa396e511
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4838
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The struct-accessors are added and named matching the fields defined in
the spec. to be used by the fio_plugin/nvme and other consumers of the
driver-layer. Comments to be consumed doc-generators as well as human
readers of the header-file.
The identify example is updated with the change.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I8d6cb82e095c5dcbc06fe892e17ce83dc0062735
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4835
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the namespace is a zoned namespace, get and print a zone report.
Since a ZNS drive can have thousands of zones, request a zone report
containing only the first 8 zones.
The code does take a ZNS drive with less than 8 zones into account,
even though such a drive is unlikely to exist in the wild.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I28ecb4d7c60ab5a911d7b1faae595f43ef6706e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4794
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Similar with existing virtio user driver, we need to enable "--single-file-segments"
option in DPDK as the target only support limited number of memory regions, for
coming vfio-user feature, the requirement is same, so here we enable the option
with identify&perf tools in advance.
Change-Id: I83d78b403a8c1ec0c76a5bf21aac6bed109931c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Log flags could also report on SPDK_LOG_INFO level by using
SPDK_INFOLOG() macro. Yet this did not result in additional
log due to check for debug build.
This patch allows release builds to use that flag.
Meanwhile the -L option besides turning on particular log flag
changes print log level to SPDK_LOG_DEBUG.
Applied changes to serveral applications to follow the
behaviour of event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0d6cce33263c350d6d83300d60e7d15bdfe4b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4557
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr->cdata.cmic.ana_reporting is 1, set the corresponding
field to true.
Then use its API in the identify application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e74bc4c114883e4aecdbee7a6f1a02027db23a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4156
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
