This reverts commit bc4e31d6b2.
This change was accidentally merged after it was decided to go with a
different architecture.
Change-Id: Ifc9d8b08bd1fcbc4ace8dd6fb4bd0014330916ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471144
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The patch of this purpose is to exclude the CPU cores
occupied by the DPDK thread. To mitigate the corner
case, we only do it when the number of online CPU cores
is larger than then DPDK thread occupied cpu cores.
The purpose is uset to improve the performance and avoid the
contention between DPDK thread and user's own thread.
Change-Id: I1a4a28074df97c55ac531440aea41059a75543f6
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471000
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If PDU header digest error is detected, it indicates that the length
field of the header may have been corrupted. Hence it's may not be
possible to identify the location of the beginning of a later PDU.
So move checking header digest before handling payload and then
close the connection if header digest error is detected.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56f6bc082dc0b244e71ad996b4da08e0203f8cdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move spdk_iscsi_execute() from iscsi_conn_handle_incoming_pdus()
to spdk_iscsi_read_pdu() and then strip the prefix spdk_ from
spdk_iscsi_execute() and make it private.
This is to introduce state machine into receive incoming PDU processing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d5b3e55ece0994532e924d3c75d898cb373875c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
IO trace ISCSI_TASK_EXECUTED was taken after PDU was freed.
spdk_trace_record() doesn't dereference the passed pointers and it's fine,
but get the trace before PDU is freed to make the coder clearer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I53a19dbd85e9599c4fa9d7458b5344cff9c76ea2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471203
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
LUN ID was not saved in iSCSI task, and it didn't work when we attached
more than one LUN.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75388ee6c1e69bb567cf7c5c691315c51cab70eb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471202
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can unify several error logs of spdk_iscsi_execute() failure
into a single error log.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1dd6a7312e5c615c478771beb89fd44fdb1710c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470286
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move logout check from iscsi_conn_handle_incoming_pdus() to
spdk_iscsi_read_pdu() to introduce state machine into receive
incoming PDUs processing.
Besides, remove a debug log because similar debug log is already
collected in spdk_iscsi_conn_read_data().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I11ee800eb1fd60796669d5390bd3cd1031066ca7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470285
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iscsi_check_data_segment_length() is NOP now and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3ba473c2989d1adf7f0fcbaef026f0b60bc1beb7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We can move data segment length check from iscsi_check_data_segment_length()
to iscsi_op_text() and iscsi_op_scsi().
Task Management Function request, SNACK request, and Logout request
don't have data segment, and so any related check is not added.
Of course we can add check if data segment length is zero though.
This patch also changes the return type of spdk_get_max_immediate_data_size()
and a related variable spdk_iscsi_pdu::data_segment_len to uint32_t to
remove unnecessary casts. They are little to stand as an independent
patch.
The next patch will remove iscsi_check_data_segment_length().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I736ec234d2726de0c70bbae7e748a5b1b5134a32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For SCSI Data-Out and NOP-Out, we can move data segment length check from
iscsi_check_data_segment_length() to iscsi_op_data() and iscsi_op_nopout(),
respectively.
In iscsi_op_nopout(), data_len had been got from reqh->data_segment_len
but reqh->data_segment_len is already copied to pdu->data_segment_len at
spdk_iscsi_read_pdu(). So add a change to use pdu->data_segment_len to
this patch. This is little change to create a single independent patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iff7d763d8ce48bdb483b809a98be82996f73f471
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470724
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During login processing, only login request is accepted. So we
can move data segment length check from iscsi_check_data_segment_length()
to iscsi_op_login().
A few patches from this will inline data segment length check into
each opcode handler and then remove iscsi_check_data_segment_length().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I527ab27e8e0d69a067839b47635584d5262b0e49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we introduce state machine, allocating data buffer and reading
PDU payload will be done in the different state. Hence separate
them into the different code block.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic54a31d7da9dbc46f558ad0f0ad26bf8b99a3ea7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The subsequent patches will separate handling header and payload.
Move getting data_len down because data_len is for payload.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I654b33e9539ed1dba63f6d303de7955eee9bb200
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When doing a reset on an NVMe-oF target with active I/O qpairs, we need
to be able to submit fabrics commands on them in order to perform a reset.
Currently, resetting a fabric controller with any I/O qpairs active will
cause the reset to hang indefinitely.
Change-Id: Ic972a301390a4dd64adabedfe01aa4e5253e40b0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The remove callback is a built in way of alerting the user application
that we have removed a controller. Once we fail a controller, we never
move it back out of that state so it is in essence removed.
Change-Id: Iaad6bef0994e9ddd5a424f6b83502f9191b2de49
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
hwqp->fgroup is valid only for IO queues and this particular function
deals with pending requests for IO queues. Check hwqp->fgroup and
bailout if called in LS queue context.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I40bc9d3c576abd145bd6b296c07dbd64fd3dabd1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
My recent changes that introduced batching to queued request
resubmission also introduced a regression that can lead to reordering
requests before submitting them to the drive. This change prevents that.
We wait until inside the internal _nvme_qpair_submit_request function to
check for queued entries to avoid queueing a request that has children.
If a request that has children gets queued, when we process completions
and resubmit the parent, it will result in the children being submitted.
Since we only account for the number of requests we completed in the
last iteration, some of the child requests may be requeued out of order,
or worse, none of the child requests will end up being submitted to the
transport and they will all be queued behind previously queued requests.
Change-Id: I58e1c458c25fbf3f9f75364f05b1076b166a6212
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470890
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In-capsule data transfer can only be supported by NVME drives with SGL memory layout
Add test to examine new behaviour
Change-Id: Iaef6564c8e5c96c1c5af16ab41d6e3827f6a82b6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we ran out of child_iov space, ensure the iovs to be aligned
with block size. However the calculation was wrong.
(to_next_boundary_bytes % blocklen) meant not to_last_block but to_next_block.
So calculate to_last_block_size by reducing to_last_block_size from blocklen.
The data was collected when the issue occured. So add unit test
by using the data.
Fixes#979
Reported-by: Geoffrey McRae <geoff@hostfission.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62a50bada450288ea7c60aec0e557c2a53cd8916
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
va_list is not passed in logfunc, so the user-provided log call can't
get the arguments corresponding to the format string.
This patch fixes it and replaces log func pointer in spdk_app_opts
with logfunc.
Change-Id: I7f7806f47c4fd8f36f3234aa5a8c877db0fc7140
Signed-off-by: Yang Fan <fanyang@smartx.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469828
Reviewed-by: Feng,Li <fengli@smartx.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Making this structure available from the ctrlr allows us to call the
remove callback when the controller is failed/removed on transports
other than pcie.
Change-Id: I2c66dfef12b039c0d6daf7df83da745757818006
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This paves the way for doing multiple reconnect attempts before failing
the controller.
Change-Id: I1ff4ee6d41a5ffb47dd186d76793d670287c4783
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
By moving the contents of spdk_nvme_ctrlr_reset to a new internal
function, I am paving the way for providing two reset paths. One, which
can be used by the user as an external API function and which provides
the same legacy behavior. Specifically, that it will always fail the
ctrlr after an attempted reset, and a second, internal path, which will
be used by the qpair reconnect code which will defer failing the qpair
to the qpair code.
Change-Id: I9ec9df55c1fecc2f00476c175bcf988207c31257
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_reactors_fini() is unconditionally called in spdk_app_fini()
at the end of every application and it currently throws a ton
of warning messages if the reactors weren't initialized yet [1].
Let's silence those warnings.
[1] $ spdk_tgt -c invalid.conf
[...]
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
(Apparently SPDK_ENV_FOREACH_CORE iterates through 128 cores
if the dpdk env framework wasn't initialized. SPDK calls
spdk_reactor_get() on each core and that's what generates the
warnings)
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: Ic3a2355ef6d2e0d0e1cc125ba21cc6a802b355bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In SPDK applications, spdk_app_start() is always followed
by spdk_app_fini(), so remove all global-state cleanup from
app_start() and let it be done by app_fini().
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: Id9fda9fda92f16cc59565691489d4a5ab4c577a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Set g_spdk_app.config early in the app init function,
so that the subsequently called spdk_app_fini() will
free it. So far the dynamicaly allocated config object
would be just leaked.
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I19ffc8bc80858d954166649f825e573f83b4bf53
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In iscsi_conn_flush_pdus(), call iscsi_conn_flush_pdus_internal()
only when the connection state is RUNNING or INVALID.
Besides, we can remove the iscsi_conn_flush_pdus() call from
iscsi_conn_sock_cb() because the connection state is already EXITING.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e1029ffa555e5e43aade53f61e942e98343006d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Request logout to the initiator asynchronously when exiting the
running connection from the target.
Based on this patch, the next patch will make flushing PDUs possible
only when the connection is RUNNING (or INVALID) and remove the
tight loop in iscsi_conn_flush_pdus().
Set timeout of logout request as 30 seconds. 30 seconds is as same as
NOP timeout and will be reasonable for now.
Add and use logout_request_timer to check the timeout.
When the connection gets internal a logout request, move the connection
to EXITING state if the connection is in INVALID state, request logout
to initiator and start 30 seconds timer if the connection is in RUNNING
state and logout is not requested yet, or do nothing otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I43192be9fd7112ad444152c0dd88f99a14aa8d30
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change logout_timeout() not to call spdk_iscsi_conn_construct() but
to move conn->state to EXITING. Then spdk_iscsi_conn_destruct() will
be called by the poller of iSCSI poll group, iscsi_poll_group_poll()
soon.
This will improve the maitainability slightly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78046ae5ad7992ad6c7509884f964d2eff6ced76
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470704
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The connection state is mainly for flushing PDUs. ISCSI_CONN_STATE_LOGGED_OUT
was as same as ISCSI_CONN_STATE_RUNNING for this point.
Replace ISCSI_CONN_STATE_LOGGED_OUT state by a is_logged_out flag
and use the latter to reject any incoming PDU after sending logout
response.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3426a3ecbd241db402b1a2f7b3914a18e3591591
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously When the connection is in login processing, flushing PDUs
had been done by tight loop. Login processing will not fill out
send buffers but we can use poller to flush PDUs as same as when the
connection is running iscsi_conn_flush_pdus().
Hence change the check condition to include INVALID state to use
poller in iscsi_conn_flush_pdus().
This change is necessary because the subsequent patches will change
iscsi_conn_flush_pdus() not to flush PDUs when the connection is not
invalid or running.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I543a912bf1aa957df7033184ce5989ac92367e49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470702
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can remove the declaration of iscsi_conn_stop() by moving
the related functions before the caller to iscsi_conn_stop(),
_iscsi_conn_check_shutdown() and _iscsi_conn_destruct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia86f6685c9e90692d8dae744495bd6f8fc310990
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
USE_RANDOM is not defined anywhere in SPDK since long ago. Hence
remove the code included if and only if USE_RANDOM is defined in
lib/iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0481f938fef2df21af49a2755b3c1fe0dbcaee36
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The subsequent patches will merge spdk_iscsi_read_pdu(),
spdk_iscsi_execute(), and iscsi_conn_handle_incoming_pdus() into
a single function by introducing state machine.
Current ordering will create unnecessary function declaration.
Hence move spdk_iscsi_read_pdu() down to the next to
spdk_iscsi_execute() to avoid it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I289ebcfc20d90753545ab9500b64fd93ca9dfb6d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470284
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_iscsi_task_response() is for not management task but for
I/O task. Hence locating it in the middle of management task
functions is not easy to understand.
spdk_iscsi_task_response() has close relationship with
iscsi_transfer_in() and hence move it up to next to
iscsi_task_transfer_in().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib81c11164168d48885a176b6d54771528c79b70c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move iscsi_queue_mgmt_task() down in the file to close to the
location that uses it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9c39a9211f0bf01165abebfba7a2eb846c10284f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Session start callbacks have technically two ways
of returning an error code:
a) as the callback return value, e.g. return -1
b) via vhost_session_start_done(int rc)
The former doesn't have any effect as that return value
is not checked anywhere. It's only present because we
wanted to use the same function signature as for the
foreach_session() callbacks. It's going to be cleaned
up in subsequent patches, but before that happens we
have to fix vhost_nvme. With vhost_session_start_done(-1)
called, DPDK will terminate the entire socket connection.
Change-Id: Ib1eff17a67eef055b0dc89fa13d1fed2f8a1fbf0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We'll start using the same code in even more places soon,
so put in a function.
Change-Id: Iee2e091009b14e9d8b56ec8f0d4a86094f7c9727
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467229
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Threads were assigned to sessions inside
vhost_session_send_event() so far, but even the doxygen
comments say that sessions would be assigned to the thread
which called vhost_session_start_done(). Currently, Vhost
uses only vhost_session_send_event() to schedule starting
the session on some thread, so the code ends up working.
We're about to remove vhost_session_send_event(), so move
the thread (poll group) assignment to start_done().
While here, publish the vhost_poll_group struct definition
via vhost_internal.h. As a replacement for
vhost_session_send_event() we would like to use
spdk_thread_send_msg() which a requires a thread object -
one of the struct fields inside vhost_poll_group.
The code for starting a session could look as follows:
pg = vhost_get_poll_group(cpumask);
spdk_thread_send_msg(pg->thread, cb);
...
cb:
// start_pollers
vhost_session_start_done(0);
Change-Id: I563f61509674768c1dea0b03767e9f39a9fb0069
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Don't unset svdev->poll_group when the last session is
stopped, just keep the old reference in there. When
a session is started, a new poll group will be picked
and svdev->poll_group will get overwritten anyway.
This is just a cleanup that aligns the code for
making vhost_session_send_event() asynchronous.
Change-Id: Ibf145603fd7525a65c4304b0bb1828dcbe2b52cf
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is useful for testing partial sends in the socket layer.
Change-Id: Ib5bb62d641ad8d6a23a662261f7c72f5ba55c813
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470520
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move spdk_iscsi_send_nopin() up to the location just above
iscsi_op_nopout().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8792f838ac482d93ae347a355c7964f587e78daf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move get_transfer_task() up in the file closer to the location
of related functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7ca7fff3e193367992d556d4cd28ef65efe55ef2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move get_scsi_task_from_ttt() and get_scsi_task_from_itt() down
in the file close to the location that uses them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5218eac3fda85e238d40eed7282d126ebe81c16b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470267
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Double pointer is clever but reference to pointer is easier to understand
because it may be familiar and reference to pointer has been used
for alloc_len and cid in the same function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b8f886bd99d3ab5b9c82c72a040816b398b308f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move session related functions, spdk_free_sess(), create_iscsi_sess(),
get_iscsi_sess_by_tsih(), and append_iscsi_sess() up in the file,
and them remove declaration of create_iscsi_sess() and append_iscsi_sess().
This makes the structure of the source code more top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I30f948abc1630b82afbdca512089d950ec73df05
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove declaration of iscsi_reject(), and move it up in the file.
This makes the structure of the source code more top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4b812bf200bba86c58c84c504134bbe7afe1e967
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary declaration of remove_acked_pdu(), and move it
down to just above the caller, spdk_iscsi_execute().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4af2c9707735669f3baac1fa6fee9bcaaa1cd64f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470263
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Group iscsi_send_r2t(), iscsi_send_r2t_recovery(), and
iscsi_remove_r2t_pdu_from_snack_list() to the following ordering:
iscsi_send_r2t()
iscsi_remove_r2t_pdu_from_snack_list()
iscsi_send_r2t_recovery(),
move the group to just above add_transfer_task(), and then
remove declaration of iscsi_send_r2t() and iscsi_send_r2t_recovery().
This makes the structure of the source code more top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I473ba13a1ac656d4a4553c7e2ac8bae463a6d441
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can remove unnecessary function declarations and make the
structure of the source code top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8d00c6cec0c0d05a6cd3b70e92062ce9c315ff3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Run the following command:
pahole ./app/nvmf_tgt/nvmf_tgt -R -C spdk_nvmf_tcp_req
It tells me change the bool definition location
of dif_insert_or_strip.
Change-Id: Ia43ab62bcc223a07e6415b2c769fe4af2b097f18
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Originally serializing extent_rle was always done as last step.
There was no need to update the buffer pointer,
since it went unused.
Next patches in series expand serialization to new descriptors,
so here the assumption is removed and buf/buf_sz is updated.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7ccfb500d64e4276359cc98c5587c6301272d728
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468232
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch simplifies return path when returning from
serialization of extent_rle.
Both paths will share more code in upcoming patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibb0ebcfe4377fe09709345d580d54050b61d3c88
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In future patches new type of extents will be added,
for compatibility the current extent type will be still
handled in the code.
To signify the difference between those two types,
current type is renamed to SPDK_MD_DESCRIPTOR_TYPE_EXTENT_RLE.
Along with any variables throughout the code,
to make it clear which ones are used.
There are no functional changes in this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7186ccc452d200036188abf1dcea9660dcedee72
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change moves the code related to serializing
extents into serparate function, in order to allow
more clear changes in further patches.
There are no functional changes in this patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If8d7c90a5b01f1608d20fd00c3e4ff6a340ce305
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we are to have multiple reconnect attempts, we have to control
whetehr the controller is placed in the failed state from outside the
reset function itself. This will allow us to fail the controller only
after all of our retries are exhausted.
Change-Id: Ia82e10325272f25b2b8527336dc3bc507c93b401
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Use the standard API function to fail the controller in all cases.
This patch, and the several following patches are aimed at creating a
mechanism for reporting up to the application layer that a controller is
failed and or removed. To do this, I use the reset_cb to inform the
upper layer that the controller is failed.
This also requires changes to how we handle a controller reset to
pave the way for doing optional reset retries in the libraries.
Change-Id: I06dfce08326c23472a1caa8f6efbac2fd1a720f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were already passing up from each transport the number of completions
done during the transport specific call. So just use that return code
and batch all of the submissions together at one time in the generic
code.
This change and subsequent moves of code from the transport layer to the
genric layer are aimed at making reset handling at the generic NVMe
layer simpler.
Change-Id: I028aea86d76352363ffffe661deec2215bc9c450
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469757
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be handled by nvme_qpair_submit_request when it receives
-EAGAIN from _nvme_qpair_submit_request.
Change-Id: I5e76aae170c981df0cadaadcd5da1163c715006f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This patch series is aimed at preserving the order of qpair entries
when resubmitting queued requests. The hope is that we will make the API
fool proof and future proof against ever reordering any queued requests.
Change-Id: Ib20d61d3abaed637c9c305b75081947630190fd4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470062
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This variable went unused, since logic in
_spdk_blob_persist_write_page_chain() already dealt with
writing metadata from last to first page.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic70c47df1ea3bb01c8031244339c42e9936f28b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
LUN hot plug was not checked after aborting SCSI Data-In tasks.
This patch is for the Github issue #938.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I131f9944d71e5fdab53f3010072ea7ed5293158c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds reference counter and gurading mutex to bdev_desc
structure to keep track of in-flight messages and avoid release of
descriptor until all of messages has been processed. With reference
counter existing remove_scheduled field in descriptor structure is not
needed anymore.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I97f78955362b04131abf202ba04e6d60343f3faf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_zone_append() allows writing to
open zone from multiple threads or from
single thread with queue depth greater than
one. Zone first logical address and number of
blocks to be written are provided by user.
Logical block address of written data is
returned in completion callback.
Change-Id: I4da994d72b7e0fe6621962e3b0f2380940ec3b45
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need to wait for ANV event completions when
unregistering device.
Change-Id: I872297da98405f16804a6fa1eb1149f0ee55b00c
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468600
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
1. Log level change to info when checking support
2. Delete new lines
3. Enlarge the timeout seconds to 10min for revert
TPer as it sometimes need 6-7min for this operation.
Change-Id: I1b7e32917bd99c859f1515b07f2530669418f0db
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The type of iovcnt of struct spdk_nvmf_request is uint32_t, and so
change the type of iovpos of struct spdk_nvmf_rdma_request from int
to uint32_t.
iovpos of struct spdk_nvmf_rdma_request is only incremented and
accessed. It is not used for comparison.
So to avoid rerunning CI, this fix is appended to the patch series.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65fc5dfb7067f6e8f7cb1e555f010b246a72ec32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469660
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By passing the pointer to struct spdk_nvmf_transport_poll_group
to spdk_nvmf_tcp_req_parse_sgl(), we can remove spdk_nvmf_tcp_req_fill_iovs()
and inline spdk_nvmf_request_get_buffers() into spdk_nvmf_tcp_req_parse_sgl().
Pointers to struct spdk_nvmf_request are used in many lines of
spdk_nvmf_tcp_req_parse_sgl(). Caching and using them simplifies and
improves readability a little for spdk_nvmf_tcp_req_parse_sgl().
We can pass pointer to not struct spdk_nvmf_tcp_transport but struct
spdk_nvmf_transport to spdk_nvmf_tcp_req_parse_sgl().
Ordering the pointer to struct spdk_nvmf_tcp_req first in parameters
of spdk_nvmf_tcp_req_parse_sgl() matches the function name.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f0d33b48383800c3b0a738eb24b11ffed7e6e60
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Create dpdk_lib_list_to_libs and dpdk_env_linker_args
functions to generate the library filename list and the
linker arguments respectively. Use these functions
internally as well.
These will be useful as part of the Seastar work, where
Seastar pkg-config includes a bunch of the DPDK libraries,
and SPDK needs to just add a few more.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa6b49a8e1defacf63b3f6b414cd2e947670f8eb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469751
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Have each sock implementation free the group_impl itself.
This allows C++ based sock implementations like Seastar
to release the group_impl memory using delete rather
than free.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If40a91e8bc93a531701fc30d847ab28fa11858ab
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The tailq and the requests all belong to the generic layer, might as
well put the queueing code there for better encapsulation.
Change-Id: Id5f08f798121b50a21044cfc61856999c50ca227
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was being ignored, and can cause some problems when trying to reset
a defunt controller over a fabric.
Change-Id: I32c11a0e2df0e140e20f870fe0fb5b9045a567b3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we would just sit forever. preventing us from properly
attempting reconnects and timing out.
Change-Id: Id7386ab95cf75fd9ac972b44afa2719aad412f49
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables us to create a single file descriptor and a single event
channel to poll for completions. With that accomplished, we can easily
poll for events on the admin qpair each time we check it for
completions.
Change-Id: I8b901252510744a956bef12594d1e045715e002e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This prevents us from failing a reset and then trying to double put the
rqpair->cq which ends up causing seg faults.
Change-Id: If3e14a3d039b4b19cc587a7482157f4b23f8ee32
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469609
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
In most places, we are passing NVME_TIMEOUT_INFINITE as the
timeout_in_ms argument to nvme_ctrlr_set_state, presumably in an attempt
to specify an infinite timeout. However, nvme_ctrlr_set_state only
checked against 0 when setting the actual timeout, and we didn't have
any logic to check for overflow so we just ended up setting random
timeout_tsc values which changes the behavior of the
nvme_ctrlr_process_init function in several places.
So, change NVME_TIMEOUT_INFINITE to 0, and add some integer overflow
checking to nvme_ctrlr_set_state.
Change-Id: Ic9d0cc57ed153df30c3b20313c3742072a5f992d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
nvmf_rdma_fill_wr_sge() gets pointer to iovec at its head, but
nvmf_rdma_fill_wr_sgl() can pass it to nvmf_rdma_fill_wr_sge()
simply.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16176d5d36ca9daf57640bfcbc49dfbf997afe54
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Pointers to struct spdk_nvmf_request and struct ibv_send_wr are
used in many lines of spdk_nvmf_rdma_request_parse_sgl().
Caching and using them simplifies and improves readability a little
for spdk_nvmf_rdma_request_parse_sgl().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib000c9d4e7fb7bb415f4ac4622b32b12cc787c80
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We can merge two loops of req->buffers and req->iov into a single
loop and merge two variables, req->num_buffers and req->iovcnt into
a single variable. For the latter, use req->iovcnt because it is
also used for in-capsule data.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia164f2054b98bbcb00308791774e3ffa4fc70baf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_nvmf_request_get_buffers()/_multi() may return not only -ENOMEM
but also -EINVAL, but spdk_nvmf_rdma_request_fill_iovs() and
nvmf_rdma_request_fill_iovs_multi_sgl() had returned -ENOMEM
regardless of the actual return value. Fix them in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic19593ffa9c0731f63d198d4ae16feb3bb47f57c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is the end of the effort to unify buffer allocation
among NVMe-oF transports.
This patch aggregates multiple calls of spdk_nvmf_request_get_buffers()
into a single spdk_nvmf_request_get_buffers_multi().
As a side effect, we can move zeroing req->iovcnt into
spdk_nvmf_request_get_buffers() and spdk_nvmf_request_get_buffers_multi()
and do it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I728bd330a1f533019957d58e06831a79fc17e382
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is close to the end of the effort to unify buffer allocation
among NVMe-oF transports.
Merge each transport's fill_buffers() into common
spdk_nvmf_request_get_buffers() of the generic NVMe-oF transport.
One noticeable change is to set req->data_from_pool to true not in
each specific transport but in the generic transport.
The next patch will add spdk_nvmf_request_get_multi_buffers() for
multi SGL case of RDMA transport.
This relatively long patch series is a preparation to support
zcopy APIs in NVMe-oF target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icb04e3a1fa4f5a360b1b26d2ab7c67606ca7c9a0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch merges nvmf_rdma_fill_wr_sgl_with_md_interleave()
into nvmf_rdma_fill_wr_sge(), and then removes
nvmf_rdma_fill_wr_sgl_with_md_interleave().
In nvmf_rdma_fill_wr_sgl(), pass DIF context, remaining data block
size, and offset to nvmf_rdma_fill_wr_sge() in the while loop.
For non DIF case, initialize all of them by zero.
In nvmf_rdma_fill_wr_sge(), classify non-DIF case and DIF case
by checking if DIF context is NULL.
As a minor change of wording, remaining is sufficiently descriptive
and simpler than remaining_io_buffer_length and so use remaining.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55ed749c540ef34b9a328dca7fd3b4694e669bfe
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch separates filling wr->sg_list from filling req->iov
in nvmf_rdma_fill_buffers_with_md_interleave() and create an new helper function
nvmf_rdma_fill_wr_sgl_with_md_interleave() to fill wr->sg_list by adding iovcnt to
struct spdk_nvmf_rdma_request.
The subsequent patches will merge nvmf_rdma_fill_buffers() into
spdk_nvmf_request_get_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I03206895e37cf385fb8bd7498f2f4a24797c7ce1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469204
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch separates filling wr->sg_list from filling req->iov
in nvmf_rdma_fill_buffers() and create an new helper function
nvmf_rdma_fill_wr_sgl() to fill wr->sg_list by adding iovcnt to
struct spdk_nvmf_rdma_request.
The next patch will do the same change for
nvmf_rdma_fill_buffers_with_md_interleave().
The subsequent patches will merge nvmf_rdma_fill_buffers() into
spdk_nvmf_request_get_buffers().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4cdf134df39997deb06522cbcb6af6666712ccc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469203
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When buffer replacement succeeds, only iov_base has to be updated.
This change is small but will be helpful to disaggregate buffer
allocation and filling WR SGL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc72fd783b515dfaecac04939c183097f939e29b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469202
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out setup WR operation from nvmf_rdma_fillbuffers_with_md_interleave()
into a function nvmf_rdma_fill_wr_with_md_interleave().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I92689daa7dcc93aaa68ecf5706d4e1b75d7fabae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469066
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch
- applies nvmf_rdma_get_lkey(),
- changes pointer to struct iovec from iovec to iov,
- changes pointer to ibv_sge from sg_list to sg_ele, and
- passes DIF context instead of decoded data block size and metadata size
- use cached pointer to nvmf_request to call
- change the ordering of operations to setup sg_ele slightly
for nvmf_rdma_fill_buffers_with_md_interleave().
Name changes are from the previous patch.
They are for consistency with nvmf_rdma_fill_buffers() and a
preparation for the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I942fb9d07db52b9ef9f43fdfa8235a9e864964c0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469201
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reduces the diff in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I85dccdc1a1a5a51777934121f50a6af97feda5a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is another preparation to support per portal group CHAP authentication
for discovery session.
Add CHAP params into struct spdk_iscsi_portal_grp, and initialize them
by global parameters at spdk_iscsi_portal_grp_create().
Copy CHAP params from portal group to connection at spdk_iscsi_conn_construct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ecb812266ac3d090f8e6db21d1d6a090f1811d9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to support per portal group CHAP authentication
for discovery session.
Previously require_chap, disable_chap, and mutual_chap had been set
and used in iscsi_negotiate_param(), and chap_group had been set
and used in iscsi_get_authinfo().
If a connection is in a discovery session, the connection can get
all CHAP params at its creation, spdk_iscsi_conn_construct().
If a connection is in a normal session, the connection can get all
CHAP params in iscsi_op_login_negotiate_chap_param().
Each connection is in either discovery session or normal session.
So the following change is possible and is done in this patch.
spdk_iscsi_conn_construct() sets all CHAP params of the connection
by global parameters. Then iscsi_op_login_negotiate_chap_param()
overwrites them by the corresponding target's parameters.
iscsi_negotiate_chap_param() and iscsi_get_authinfo() just refer
the CHAP params.
Besides, iscsi_get_authinfo() changed to call just
spdk_iscsi_chap_get_authinfo() inside, and so inline
spdk_iscsi_chap_get_authinfo() into iscsi_auth_params() and then
remove iscsi_get_authinfo().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8028673cc6923e1b8bc20af55e0c3cc933972fc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9fb7a998f7c13ce53cba630a895e8e11cf5f4a1c
Signed-off-by: Benjamin Saunders <bsaunders@google.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467559
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_io_get_append_location() will be
used during zone append command to retrieve
location of data write.
Change-Id: I1f46ae9d2f745aa53264c1a01da3f7cef4f38c72
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
SPDK_ERRLOG lists the function name, so remove old references that
assume it doesn't and reprint the function name.
Change-Id: I69da6ca0a25bf0eda07d8dad52bcfadf964ac715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Factor out getting lkey and checking translation length in
nvmf_rdma_fill_wr_sge() into a function nvmf_rdma_get_lkey().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I495ba9ae4a48b4aa7dc35a0bd72708753846dfdc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Cache pointers to iovec and ibv_sge at the head of the function
and use them throughout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I493759bf3989ced4390d077280cd44c122847d08
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out setup WR operation from nvmf_rdma_fill_buffers() into a
function nvmf_rdma_fill_wr_sge().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I813f156b83b6e1773ea76d0d1ed8684b1e267691
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
The subsequent patches unifies getting buffers, filling iovecs, and
filling WRs in a single API. This is a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I077c4ea8957dcb3c7e4f4181f18b04b343e9927d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468953
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This is a preparation to unify getting buffers, filling iovecs,
and filling WRs in a single API in RDMA transport and then to unify
it among RDMA, TCP, and FC transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia69d4409c8cccaf8d7298706d61cd4e2d35e4406
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This patch makes multi SGL case possible to call spdk_nvmf_request_get_buffers()
per WR.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I977ebb0c6b2a67218c9b6fc20dc26a93a6ec770b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
This patch makes multi SGL case possible to call spdk_nvmf_request_get_buffers()
per WR.
This patch has an unrelated fix to clear req->iovcnt in
reset_nvmf_rdma_request() in UT. We can do the fix in a separate patch
but include it in this patch because it is very small.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6e5af0505fb199c95ef5d0522b579242a7cef29
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch matches the ordering of single SGL case and multi SGL
case for parsing SGL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea026b48e8957e140b71db7afaf8aca88634dc33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
In nvmf_rdma_requst_fill_iovs_multi_sgl(), length of descriptors
are accumulated into req->length. However, req->length was not cleared
when nvmf_rdma_fill_buffers() fails in the middle. This patch fixes it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I80a55d90d09c8af46d570e017d342afd69f41996
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
wr->num_sge has to be used in spdk_nvmf_rdma_request_fill_iovs(),
and memset() can be used instead of clearing each variable.
Besides, holding cached pointer to the current WR simplifies the
code a little and so is done together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iebda158f85e3a0e3046686f76991217fa7297c24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
With this change we only check the subsystem state once.
Previously it did it twice, and with a different order
(once PAUSED || INACTIVE, the other INACTIVE || PAUSED).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idef44accc69dccb9d161b8f04b9d5d3bbbf9e037
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The previous version of this function precluded one target name from
being a leading substring of another. i.e. if "nvmf_tgt_1" was already
used as a name "nvmf_tgt_11" could not be used subsequently.
Just an odd quirk that shouldn't be the case.
Change-Id: Iea59b6757512f01070e48074e35a11d942e399bb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Also update the changelog for the previous few changes.
Change-Id: I79ac330b4992ccc3e41fd1643b09128c6de6c86d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The current connection scheduling mechanism (RoundRobin) doesn't take into account the qpair type and assigns each new qpair to the next poll group. As a side effect there might occur a disbalance when some poll group handles more IO qpairs than others. In RDMA transport it is possible to get the qpair type before the controller creation using a private data from the rdma_cm event, this allows to schedule admin and IO qpairs in the balanced way.
Change-Id: I90c368a41c4cd0f5347a83cab7511e4494f05b29
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468993
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Operations with poll groups list must be protected by rtransport->lock.
Make rtranposrt->lock recursive to avoid unnecessary mutex operations when
the poll group is being destroyed within spdk_nvmf_rdma_poll_group_create
Change-Id: If0856429c10ad3bfcc9942da613796cc86d68d8d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468992
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On a DIF verification error, fail the read command with a status code
of APPLICATION_TAG_CHECK_ERROR, GUARD_CHECK_ERROR, or
REFERENCE_TAG_CHECK_ERROR and a status code type of SCT_MEDIA_ERROR.
The state of the request is TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST
when a DIF verification error is detected. So dequeue the request
from C2H data queue, return the response PDU, and then send the command
response.
This was an item on the TODO list. RDMA transport do this right
behavior from the start and so TCP transport follows it by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I102bbd253cc8c1379d0937c9536bf2bfe04cbf6a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
tcp_req->orig_length had been set just before I/O submission but
the value is already fixed in spdk_nvmf_tcp_req_parse_sgl().
Hence move setting tcp_req->orig_length accordingly.
This follows the good practice of RDMA transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I99f6e266d8f7027bce810864314f3ee24a1af10c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Algorithm and some code from: https://github.com/aklomp/base64
Get ~2.3x speedup for encoding and ~1.7x speedup for decoding on
AArch64.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ifce07299aea722337b0b4886117d1f616c5c03ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bdev_zone_management() allows to perform
management action on a zone. Zone is specified
by start logical block address. Available zone
actions: open, close, reset and finish.
Change-Id: Ie7eaed3e2cc7b9b49dd51ee2d6c28b4ef2f23eb9
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460647
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_get_zone_info() is used for retriving
information about zones inside zoned namespace.
Change-Id: I8f931505245e984c0b1ee35ed6592c978ee47544
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some internal bdev.c static function will be shared
with new zoned bdev module.
Change-Id: Ifbb8bf443f67b2daf97858b15d474ecce98a9efb
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Added new public header for zoned bdev. Zoned bdev is an
extension of the bdev interface. Generic concept comes
from ATA/SCSI and is also being worked as an NVMe TP.
Zoned device logical blocks space is divided into fixed-sized
zones. Each zone is described by its start logical block address
and capacity. Writes to a single zone need to be sequential.
After zone is fully written it need to be reset to write to it
again. Such writing schema could be very beneficial in terms of
write amplification factor for NAND based devices.
SPDK Flash Translation Layer library will be consuming this
interface in the future.
Extending SPDK bdev interface will allow to use existing bdev
infrastructure for this new type of devices.
Zoned device have several properties defined in spdk_bdev
structure:
- zone_size: default size of each zone
- max_open_zone: maximum number of open zones
- optimal_open_zones: optimal number of open zones to get
best performance on writes
Single zone properties are defined in spdk_bdev_zone_info
structure:
- start_lba: first logical block of z zone
- write_pointer: logical block address in the zone at
which next write shall occur.
- capacity: maximum number of logical blocks that may
be written in the zone when zone is empty.
- state: zone state
Several zone states are defined: Empty, Open, Full, Closed,
Read Only and Offline.
To change zone state zone actions are defined: Close, Finish,
Open and Reset.
Change-Id: I5fcc22d548c15743329344cae96f5ff73e268504
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This patch is entry point for extending bdev
interface to support devices with zoned namespace
semantics.
spdk_bdev_is_zoned() will allow user to check if
bdev is zoned bdev.
Change-Id: Id9ea9898d406d1d942bf3081b00ebcb574ac2b5e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
used for creating a new spdk_nvmf_tgt structure in the application.
Change-Id: Ib0182ea6d935b84b4fe4fcad79e173cb46859669
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Functions added in this patch:
spdk_nvmf_tgt_get_name - get human readable name from target.
spdk_nvmf_get_first_tgt - start iterating over global list of targets
spdk_nvmf_get_next_tgt - get next target in iteration
These functions will facilitate the following RPC
nvmf_get_targets - get the names of all active NVMe-oF targets.
In this series, I will also add two more RPCs, nvmf_create_target, and
nvmf_destroy_target, as wrappers around the create and destroy
functions. Since all of these changes are pretty minor and closely
related, I will just do one big changelog entry at the end.
Change-Id: Ia9f1248fbf9726fa3889998a169211fb25e724f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This issue can be reproduced on fedora30.
Add assert here is enough to fix this kind of warning.
Error log:
rdma.c:3070:20: warning: Access to field 'data_buf_pool' results in a
dereference of a null pointer (loaded from field 'transport')
spdk_mempool_put(group->transport->data_buf_pool, buf);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
This is to fix issue #965.
Change-Id: Ifb742ab914ee9a0381dca0bb769ba8aa564c816f
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added write_unit_size field to bdev structure.
It describes required number of logical blocks
for write operation. For legacy bdevs this value
will be equal to logical block size.
For bdevs working on top of Open Channel/Zoned
Namespace SSDs or RAID 5 volumes write size unit
could be greater than logical block size and
upper layer should perform write operations
with size of multiple of write unit size.
Change-Id: I55eb6687912a7d0d1157874b2778e7d6c2d44e37
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Update transaction length wrt to medata size
Change buffers handling in the case of enabled DIF - add function nvmf_rdma_fill_buffer_with_md_interleave to split SGL into several parts with metadata blocks between them in order to perform RDMA operation with appropriate offsets
Add DIF generation before executing bdev IO operation
Add parsing of DifInsertOrStrip config parameter.
Since there is a limitation on the number of entries in SG list (16), the current approach has a limitation on the max transaction size which depends on the data block size. E.g. if data block size is 512 bytes then the maximum transaction size will be 512 * 16 = 8192 bytes.
In adiition, the size of IO buffer (IOUnitSize conf param) must be aligned to metadata size for better perfromance since metadata is treated as part of this buffer. E.g. if the initiator uses transaction size = 4096, data block size on nvme disk is 512 then IO buffer size should be aligned to (512 + 8) which is 4160. In other case an extra IO buffer will be consumed which will increase the number of entries in SGL and in iov.
Change-Id: I7ad2270fe9dcceb114ece34675eac44e5783a0d5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Weighted Round Robin can be enabled for users, and users
can allocate different priority IO queues for different
purpose. For now we will enable this feature in the
NVMe driver first, following patches will enable this
feature in bdev layer.
Change-Id: I0f799236ca04eb85ef3c9f972ed63ff2718563ba
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Parameter 'MinConnectionsPerCore' was removed in last release and marked
as deprecated, now we will deprecate 'MinConnectionsPerCore' finally.
Change-Id: I613a371e8b5352dfb84f8e4293805b792020c643
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Now code always return 0 , do this like nvme_rdma_mr_map_notify.
That callback can get the right return.
Change-Id: Ief2924e14321b2062f6001e7ae3f50d507206594
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the spdk_vhost_scsi_dev_remove() it takes a period of time
to remove all the tgts but before it is completed the scsi dev
has been freed. So don't free the scsi dev until all the tgts
have been removed.
Fix Github issue #932
Change-Id: Idf9293c70b8d5f82091db6dd5e018a5cb40eea36
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
By splitting all cm_event handling into a single function, we can create
a single point of contact for cm_events, whether we want to process them
synchronously or asynchronously.
Change-Id: I053a850358605115362f424de55e66806a769320
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is paving the way for additional changes to enable polling for
cm_events in the initiator.
For now, just present the same blocking API on top of the now polled
file descriptor. Later, we will change this API to be more useful.
Change-Id: I174dac028720f95c30100f6dc2ed49b5bb2a7e40
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_pci_device_claim() could create a file on the
filesystem that couldn't be deleted programatically.
It could only be overwritten - e.g. by another spdk
instance - but this didn't really work if that
another instance had less privileges and hence no
access to the previous file.
This is exactly the case we're seeing on our CI when
running SPDK as non-root. In general it's a good idea
not to leave any leftover files, so now we'll delete
the pci claim file when the spdk process exits.
spdk_pci_device_claim() used to return a file descriptor
that could be simply closed to "un-claim" the device.
It'll now return only a return code. The fd will be
stored inside spdk_pci_device and will be closed either
when user calls the newly introduced spdk_pci_device_unclaim(),
or when the device is detached.
We'll still need to clean up those files somewhere in
our test scripts (probably ./setup.sh cleanup) to
clean up after crashed processes or so - but we don't
necessarily want to run such scripts inside the autotest
whenever a non-root spdk is about to be started.
Change-Id: I797e079417bb56491013cc5b92f0f0d14f451d18
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Prepare for the further optimization work
to use one bigger buffer to read more data for
reducing system calls.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie92603b09308bd3149263269fdec355b67251b37
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Get all of the important stuff into the first cache line.
Change-Id: I5bbfb031bb1d693019abb9e5145579d0b867eaf5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
If the CPU reorders the eventidx read before the shadow doorbell
write, it is indeterminate whether the controller will read the
updated shadow doorbell without an MMIO write. See
https://lkml.org/lkml/2018/8/14/1031 for details.
Signed-off-by: Benjamin Saunders <bsaunders@google.com>
Change-Id: I5aa08fdd5b32c7b81e8048ca6efe546318d80b5c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468188
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is a very rare thing for a buffer to be split over two memory
regions. In fact, it is only possible in dpdk versions where
--match-allocations is not passed as a startup parameter to dpdk but
dynamic memory allocation is enabled.
By adding a small helper function, we avoid failing an I/O because it
was assigned one of these improperly aligned buffers. Also, we try to
remove the buffer from circulation so that it doesn't get picked up
again by another request.
Also, add a unit test to catch this case.
Change-Id: Ia09865c2f77160a960571665b29c4533b11758ae
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Just cleaning up a few things like variable names and ordering to make
the whole function more readable.
Change-Id: I1503cdb43ddd73e063d6e57e9ff0cf2a06e79728
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
IB Architecture Specification vol.1 rel.13. in ch.10.3.1 "QUEUE PAIR
AND EE CONTEXT STATES" suggests the following destroy procedure for
QPs associated with SRQ:
- Put the QP in the Error State;
- wait for the Affiliated Asynchronous Last WQE Reached Event;
- either:
* drain the CQ by invoking the Poll CQ verb and either wait for CQ
to be empty or the number of Poll CQ operations has exceeded CQ
capacity size; or
* post another WR that completes on the same CQ and wait for this WR
to return as a WC;
- and then invoke a Destroy QP or Reset QP.
Without the drain step it is possible that LAST_WQE_REACHED event is
received and QP is destroyed before the last receive WR completion is
polled from the CQ.
In SPDK there is no risk of resource leakage in this case. So, instead
of draining we can destroy QP and then just ignore receive completions
without QP and post receive WRs back to SRQ.
Fixes#903
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ice6d3d5afc205c489f768e3b51c6cda8809bee9a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465747
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Function multiversioning conflicts with LTO when applied
to a function defined in a header file included from
multiple compilation units.
Change-Id: I65bed3903a717b7e982ab185c314d2118ae0e795
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Support for these options was not introduced until DPDK commit
7f0bb634a1406b132ff15c9cd56a0a9f33e5f11d
Signed-off-by: Benjamin Saunders <bsaunders@google.com>
Change-Id: Id6db73dd48ac01aa1b05eca4c920c5753e8cc6f0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467703
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The default behavior is to set it to 2MB, so this isn't
required anymore.
Change-Id: I62d7605cd4d5bc41347128f32f9a1aa373a15744
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
The socket now automatically sets the recvbuf size
to 2MB, so this isn't necessary.
Change-Id: Id2196f4038f6835118047233f18c0395fa3f2670
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The dependencies between vhost and rte_vhost were not added during
earlier changes. This change moves the rte_vhost directory up to the
level of the other libraries and adds the proper dependencies for when
it is linked.
Change-Id: I089de1cd945062b64975a0011887700c0e38bb0f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 6129e78d26.
When the initiator sends the discovery log page, if the log page
exceeds the size of its data buffer, it will break it up into
multiple log page commands with appropriate offsets. However,
supporting offsets in log pages is an optional feature in NVMe
and reported by the EDLP bit in the identify data.
This commit changed the discovery process to no longer send an
identify command prior to doing the discovery log page command,
so the values in the identify data are always 0. If the discovery
log page exceeds the size of the data buffer (4k), it will then
fail to send the second log page with an offset because it
believes the controller does not support the feature.
Revert this change to fix it. An identify should always be sent
as part of the discovery process. A test case is included in a
follow up patch the demonstrates the bug.
Reported-by: Zahra Khatami <zahra.k.khatami@oracle.com>
Reported-by: Akshay Shah <akshay.shah@oracle.com>
Change-Id: Iefd512a7521e0fea90541b3eb547671cfa816ea6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We used to call a dpdk function to do it, but using
a function for something that simple doesn't make sense.
The function also does its internal queue lookup by vid
and queue number, which could potentially fail, return an
error and technically require SPDK to handle it.
The function makes some sense for vhost-net applications
which don't touch vrings directly but rely on rte_vhost's
API for enqueueing/dequeuing mbufs. SPDK touches DPDK's
rings directly for the entire I/O handling, so it might
just as well for initialization.
This serves as cleanup.
Change-Id: Ifb44fa22ea5fc3633aa85f075aa1a5cd02f5423c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The reported github issue #938 has been reported intermettently.
The issue is that the bdev descriptor passed to spdk_bdev_reset()
is not valid and causes seg. fault.
Current implementation of LUN hot plug is that putting IO channel
and removing LUN are done by different poller. Hence if any task
management command is issued between the gap, the reported issue
is likely to occur.
The flag removing is set at the start of LUN hot plug and so
spdk_scsi_dev_get_lun() can return NULL even before completing
removal by referring the flag removing.
Fixes#938.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1a51d90cc700134e8c0ec399a3ce62620c84ef73
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467212
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since we use pdu->data_iovcnt to
build the iov in nvme_tcp_build_iovs, so
send out pdu has the maximal iov number
equals to: 2 + pdu->data_iovcnt,
so we change the comparison.
This makes sure that we can handle all the data
owned by one pdu.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2b9258cc5716d706c0fa38af609726c439708768
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This will be consistent with TCP and RDMA transport, and we will use
ctrlr->flags in nvme_ctrlr_init_cap() in next patch, the flags will
be cleared to 0 for now.
Change-Id: Ic360cd0c00d60c77452d19cdc1e7a32a5fc34df0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466678
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change the way we increase poll group reference counts
for round-robin scheduling.
So far we used to increase them whenever someone called
vhost_get_poll_group() and this worked fine for Vhost-Block
which picks a new poll group for each session. Vhost-SCSI,
however, picks only one poll group for all sessions on
a vhost device. This means that some threads will have
multiple Vhost-SCSI pollers but will still appear to the
vhost scheduler as if they had only one.
To fix it, increase poll group refcnt only when sessions
are really being started - in vhost_session_start_done().
Change-Id: I60f0d2101239e5a91138a5afd30c51dc1ccf7c2e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently vhost_dev_foreach_session() accepts a single
callback function for both iterating through all active
sessions and for signaling the end of iteration (called
last time with vsession param == NULL). Now that the
final signal has completely different semantics and is
called on a specific thread, it makes sense to put it in
a separate function.
While here, remove the one-line description of
spdk_vhost_session_fn typepef. It wasn't helpful anyway.
Change-Id: I56b97180110874a813e666f964bb51c39a8ce6bb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently vhost_dev_foreach_session() accepts a single
callback function for both iterating through all active
sessions and for signaling the end of iteration (called
last time with vsession param == NULL). Now that the
final signal has completely different semantics and is
called on a specific thread, it makes sense to put in
a separate function.
In this patch we prepare separate functions for the final
call, but still call them in the original callback. In
a separate patch we'll start passing both functions
directly to foreach_session().
Change-Id: I9f4338d9696f7bd15ca2d6655c6a3851569aff75
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function could never fail, so make it return void
rather than int. This serves as cleanup.
Change-Id: I16a857ecee8d162f546fd097acaa2e66d51ebffa
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Historically the callbacks from vhost_dev_foreach_session()
could be called with vdev argument == NULL, which would
mean that device was removed after enqueuing the event
and before consuming it. Now we keep track of pending
asynchronous operations on each vhost device and don't
allow removing it if there are any unconsumed events,
so the the vdev == NULL checks are redundant. Remove them.
Change-Id: I7aa3785080d20ed06e008c081d3f37a949228f5a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove them all at once. spdk_ prefix should be
only applied to publicly exported functions.
Change-Id: Ib6d2bd0954ec5cb7c8cf253d79b9d3cd8aa0eeef
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This unifies buffer management among transports further and is a
preparation to make buffer allocation asynchronous.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c588eeac4081f50fe32605feb7352f72c628d95
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466847
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
I/O buffer cache is per transport_poll_group now. Hence moving
pending_data_buf_queue from struct spdk_nvmf_fc_conn to struct
spdk_nvmf_fc_poll_group is reasonable and do it in this patch.
This change is based on RDMA and TCP transport.
Further unification among transports will be done in subsequent
patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic857046be8da238cb3ff9e89b83cdac5f6349bcf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466844
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to transport is set to struct nvmf_transport_poll_group
in nvmf_transport_poll_group_create() after returning
nvmf_fc_poll_group_create(). Hence use it and remove ftransport pointer
from struct nvmf_fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f2b2ade77afa18d0e97949fc0c2403eb000cdad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467060
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rtransport and TCP transport have used
ttransport, respectively. So FC transport changes to use ftransport
instead of fc_transport.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7d98eb2f6efbae7e2b4784f31b9de5e1a81bc2ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467059
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both RDMA and TCP transport have uesd group for such case. Hence
FC transport changes to use group instead of tp_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4b401179da506bb204c3ec48650db87f91fe72a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466843
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pointer to nvmf_poll_group is set in nvmf_transport_poll_group_create()
after returning nvmf_fc_poll_group_create(). Hence holding it into
struct spdk_nvmf_fc_poll_group is duplicated and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7087c5cdb94b0b0c5f51b0b63b631c08266c90d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466842
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
RDMA transport have used rgroup and TCP transport have used tgroup
for such case. Hence FC transport changes to use fgroup instead of
fc_poll_group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I91b7ad6a1c6e45caf92801b0635b18d48b3c9810
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466841
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Start processing ANM events only after the device is fully initialized.
Otherwise some of the structures are partially filled and can be
interpreted incorrectly.
Change-Id: Ia741730cf15d44d76ce8afa7955e6a5bf42ca42b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466935
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Track the number of acquired but not yet submitted write buffer entries
to be able to correctly calculate the required number of entries to be
padded.
Change-Id: Ie201681937ad1d03ec125aa5912311c54a7e35c9
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466934
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When recovering the data from the non-volatile cache, the data inside
the volatile cache needs to be flushed before flushing active bands.
Otherwise, if the number of blocks in a band is smaller than the number
of blocks inside the volatile cache, part of the data may not get
flushed.
Change-Id: I4e99709c8c2a526a928578870d7fbd5fef37db02
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466883
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keeping a global discovery log page was meant to be a time saving
mechanism, but in the current implementation, it doesn't work properly,
and can cause undesirable behavior and potential crashes. There are two
main problems with keeping a global log page.
1. Admin qpairs can be assigned to any SPDK thread. This means that when
multiple initiators connect to the host and request the discovery log,
they can both be running through the spdk_nvmf_ctrlr_get_log_page
function at the same time. In the event that the discovery generation
counter is incremented while these accesses are occurring, it can cause
one or both of the threads to update the log at the same time. This
results in both logs trying to free the old log page (double free) and
set their log as the new one (possible memory leak).
2. The second problem is that each host is supposed to get a unique
discovery log based on the subsystems to which they have access.
Currently the code relies on whether the discovery log page offset in
the request is equal to 0 to determine if it should load a new discovery
log page or use the cached one. This is inherently faulty because it
relies on initiator provided value to determine what information to
provide from the log page. An initiator could easily send a discovery
request with an offset greater than 0 on purpose to procure most of a
log page provided to another host.
Overall, I think it's safest to not cache the log page at all anymore
and rely on a thread local fresh log page each time.
Reported-by: Curt Bruns <curt.e.bruns@intel.com>
Change-Id: Ib048e26f139927d888fed7019e0deec346359582
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466839
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the past, memory in spdk could have been unregistered in
different chunks than it was registered, so to account
for that the vtophys code used to register each hugepage
(2MB chunk of memory) separately to the VFIO driver. This
really made the code generally simple.
Now that memory in spdk can only be unregistered in the same
chunks it was registered in, we no longer have to register
each hugepage to VFIO separately. We could register the
entire memory region with just a single VFIO ioctl instead,
so that's we'll do now.
This serves as an optimization as we obviously send less
ioctls now, but most importantly it prevents SPDK from
reaching a VFIO registrations limit that was introduced
in Linux 5.1. [1]
The default limit is 65535, which results in SPDK being able to
make only the first 128GB of memory DMA-able. This is most
problematic for vhost where we need to register the memory
of all the VMs.
Fixes#915
[1] 492855939bdb59c6f947b0b5b44af9ad82b7e38c
("vfio/type1: Limit DMA mappings per container")
Change-Id: Ida40306b2684e20daa2fd8d12e0df2eef5a4bff1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/432442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We'll be now able to check contiguity for more than 2MB
regions.
Change-Id: I738ff451d534075c944972918d08e5e0cadea4f5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466073
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most variables related with I/O buffer are in struct spdk_nvmf_request
now. So we can pass nvmf_request instead of nvmf_rdma_request to
nvmf_rdma_request_fill_buffers and do it in this patch.
Additionally, we use the cached pointer to nvmf_request in
spdk_nvmf_rdma_request_fill_iovs which is the caller to
nvmf_rdma_request_fill_buffers in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia7664e9688bd9fa157504b4f5075f79759d0e489
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Most variables related with I/O buffer are in struct spdk_nvmf_request
now. So we can pass nvmf_request instead of nvmf_tcp_req to
nvmf_tcp_req_fill_buffers and do it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00eff578a98891e99fcb9a3aafa3d99126d6f1c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
