A local variable alloc_len had been used to hold the data buffer
length of the response PDU. But it's more intuitive to use
rsp_pdu->data_buf_len instead.
The subsequent two patches will replace related functions accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I48f96a542d6c177ba1d8409ff0230fa61c11e154
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Including getting incoming login parameters into iscsi_op_login_rsp_init()
was not so intuitive.
Initializing login response done in iscsi_op_login_rsp_init() can be
done before reading data segment but getting incoming login parameters
can be done only after reading data segment.
As a preparation to separate PDU header and payload handling for
Login Request PDU, extract getting incoming login parameters from
iscsi_op_login_rsp_init() into an new function
iscsi_op_login_store_incoming_params().
Besides, refine a few pointer and return code handling to make the
code a little clearer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b677bf6e93b830e6e6fead24c8b78d9d9bc1df4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously, pdu->data_segment_len had been set after reading all
data segment to the allocate data buffer pdu->data_bur together with
pdu->data and pdu->data_from_mempool.
But we don't have any ordering constraint to do that and the value of
pdu->data_segment_len has been fixed when reading all PDU BHS.
Hence move setting pdu->data_segment_len up to immediately after
reading PDU Basic Header Segment to pdu->bhs in iscsi_read_pdu().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6f690623687ee974c5a1d73814e8675bb7077c8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix static analyzer error by ensuring 4 * total_ahs_len is
not larger than ISCSI_AHS_LEN.
When ./configure -enable-werror --enable-ubsan --enable-asan,
iscsi target reports heap-buffer-overflow error
when I feeding unexpeted pdu opcode.
Change-Id: Ib8053e1a19b5e49385642106eb79c458d35ab3c6
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471489
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Refine the public helper function spdk_scsi_dev_has_pending_tasks to
be able to check tasks only from the specific initiator.
Then use the function in iSCSI target to fix the issue.
Besides add UT code to test the updated spdk_scsi_dev_has_pending_tasks().
Automated multi hosts test is much better but some UT code will be of any
help to mitigate the risk of degradation.
Fixes#985
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I50afb940de7174360c8a30479450850002a3e525
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SCSI command uses iSCSI task and data buffer, and will use zero copy
bdev I/O APIs.
To use zero copy bdev I/O APIs, we have to allocate iSCSI task
before allocating data buffer.
Hence we separate PDU header and payload handling for SCSI command,
include iSCSI task allocation into PDU header handling first.
Use pdu->task to pass the task allocated by the former to the latter.
In iscsi_pdu_hdr_op_scsi(), we can not expect pdu->data_segment_len
is set. So getting data segment length from PDU BHS instead.
In the updated iscsi_op_scsi(), if it sees pdu->task is NULL or
pdu->is_rejected is true, do nothing. Besides, check LUN hot plug
again to separate PDU header handling and PDU payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic09451ab022b9714381f03c63bd3008c39fedb8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We want to move iSCSI task allocation before data buffer allocation
to use zero copy APIs in iSCSI target. As a preparation, we have to
separate PDU header and payload handling. This patch makes it a little
easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib7f5ec71933fd6022fd2248aff0a0bd89b7ad830
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Separate PDU header and payload handling for Text Request PDU.
This will clarify the header handling and payload handling.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I162af0b4bf281852bb13af5f3261dacb38dee5e0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Double pointer is clever but reference to pointer is easier to understand.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5168e08ca67942c22ba2cbdc10925e8a9fd6da6c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The subsequent patches will separate PDU header handling and PDU
payload handling. But for the PDUs which have data segment,
if PDU header is correct, we have to read data segment even if any other
error is found and the PDU is rejected.
To do that, add a flag is_rejected to pass if the PDU is rejected or
not from PDU header handling to PDU payload handling.
If PDU payload handling sees the PDU is already relected, do nothing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie3fe518fc0f452da9965a2fe3642568c86866480
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471005
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will separate PDU handler into PDU header handler
and PDU payload handler.
Some PDU types will have both PDU header handler and PDU payload handler,
and command is executed in PDU payload handler.
Some PDU types will have only PDU header handler, and command is
executed in PDU header handler.
CmdSN must be updated appropriately depending on the case.
As a preparation, factor out updating CmdSN into a helper function
iscsi_update_cmdsn().
Besides, storing the passed CmdSN into PDU is duplicated and remove
the duplication in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib5f271a1624a39e82d6271dfebcc181e3850e260
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
To make the code clearer,
- make the spdk_iscsi_read_pdu() private in iscsi.c and named iscsi_read_pdu(), and
- make the iscsi_conn_handle_incoming_pdus() public and named
spdk_iscsi_handle_incoming_pdus().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I967681b8e9b86681a906b18719e91e1d387450d7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469969
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add PDU receive state to each connection, and each connection
transits among states during receiving incoming PDUs.
Four states, AWAIT_PDU_READY, AWAIT_PDU_HDR, AWAIT_PDU_PAYLOAD,
and ERROR are same as SPDK NVMe-TCP target.
Move clearing conn->pdu_in_progress just before putting pdu
when PDU processing completes normally to match with error case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id24b6d6662896b5685125a46ee20cbf216668838
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If PDU header digest error is detected, it indicates that the length
field of the header may have been corrupted. Hence it's may not be
possible to identify the location of the beginning of a later PDU.
So move checking header digest before handling payload and then
close the connection if header digest error is detected.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56f6bc082dc0b244e71ad996b4da08e0203f8cdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move spdk_iscsi_execute() from iscsi_conn_handle_incoming_pdus()
to spdk_iscsi_read_pdu() and then strip the prefix spdk_ from
spdk_iscsi_execute() and make it private.
This is to introduce state machine into receive incoming PDU processing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5d5b3e55ece0994532e924d3c75d898cb373875c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
IO trace ISCSI_TASK_EXECUTED was taken after PDU was freed.
spdk_trace_record() doesn't dereference the passed pointers and it's fine,
but get the trace before PDU is freed to make the coder clearer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I53a19dbd85e9599c4fa9d7458b5344cff9c76ea2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471203
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
LUN ID was not saved in iSCSI task, and it didn't work when we attached
more than one LUN.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75388ee6c1e69bb567cf7c5c691315c51cab70eb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471202
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can unify several error logs of spdk_iscsi_execute() failure
into a single error log.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1dd6a7312e5c615c478771beb89fd44fdb1710c1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470286
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move logout check from iscsi_conn_handle_incoming_pdus() to
spdk_iscsi_read_pdu() to introduce state machine into receive
incoming PDUs processing.
Besides, remove a debug log because similar debug log is already
collected in spdk_iscsi_conn_read_data().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I11ee800eb1fd60796669d5390bd3cd1031066ca7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470285
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iscsi_check_data_segment_length() is NOP now and can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3ba473c2989d1adf7f0fcbaef026f0b60bc1beb7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We can move data segment length check from iscsi_check_data_segment_length()
to iscsi_op_text() and iscsi_op_scsi().
Task Management Function request, SNACK request, and Logout request
don't have data segment, and so any related check is not added.
Of course we can add check if data segment length is zero though.
This patch also changes the return type of spdk_get_max_immediate_data_size()
and a related variable spdk_iscsi_pdu::data_segment_len to uint32_t to
remove unnecessary casts. They are little to stand as an independent
patch.
The next patch will remove iscsi_check_data_segment_length().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I736ec234d2726de0c70bbae7e748a5b1b5134a32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For SCSI Data-Out and NOP-Out, we can move data segment length check from
iscsi_check_data_segment_length() to iscsi_op_data() and iscsi_op_nopout(),
respectively.
In iscsi_op_nopout(), data_len had been got from reqh->data_segment_len
but reqh->data_segment_len is already copied to pdu->data_segment_len at
spdk_iscsi_read_pdu(). So add a change to use pdu->data_segment_len to
this patch. This is little change to create a single independent patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iff7d763d8ce48bdb483b809a98be82996f73f471
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470724
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During login processing, only login request is accepted. So we
can move data segment length check from iscsi_check_data_segment_length()
to iscsi_op_login().
A few patches from this will inline data segment length check into
each opcode handler and then remove iscsi_check_data_segment_length().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I527ab27e8e0d69a067839b47635584d5262b0e49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470723
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we introduce state machine, allocating data buffer and reading
PDU payload will be done in the different state. Hence separate
them into the different code block.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic54a31d7da9dbc46f558ad0f0ad26bf8b99a3ea7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The subsequent patches will separate handling header and payload.
Move getting data_len down because data_len is for payload.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I654b33e9539ed1dba63f6d303de7955eee9bb200
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In iscsi_conn_flush_pdus(), call iscsi_conn_flush_pdus_internal()
only when the connection state is RUNNING or INVALID.
Besides, we can remove the iscsi_conn_flush_pdus() call from
iscsi_conn_sock_cb() because the connection state is already EXITING.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e1029ffa555e5e43aade53f61e942e98343006d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Request logout to the initiator asynchronously when exiting the
running connection from the target.
Based on this patch, the next patch will make flushing PDUs possible
only when the connection is RUNNING (or INVALID) and remove the
tight loop in iscsi_conn_flush_pdus().
Set timeout of logout request as 30 seconds. 30 seconds is as same as
NOP timeout and will be reasonable for now.
Add and use logout_request_timer to check the timeout.
When the connection gets internal a logout request, move the connection
to EXITING state if the connection is in INVALID state, request logout
to initiator and start 30 seconds timer if the connection is in RUNNING
state and logout is not requested yet, or do nothing otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I43192be9fd7112ad444152c0dd88f99a14aa8d30
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change logout_timeout() not to call spdk_iscsi_conn_construct() but
to move conn->state to EXITING. Then spdk_iscsi_conn_destruct() will
be called by the poller of iSCSI poll group, iscsi_poll_group_poll()
soon.
This will improve the maitainability slightly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78046ae5ad7992ad6c7509884f964d2eff6ced76
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470704
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The connection state is mainly for flushing PDUs. ISCSI_CONN_STATE_LOGGED_OUT
was as same as ISCSI_CONN_STATE_RUNNING for this point.
Replace ISCSI_CONN_STATE_LOGGED_OUT state by a is_logged_out flag
and use the latter to reject any incoming PDU after sending logout
response.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3426a3ecbd241db402b1a2f7b3914a18e3591591
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously When the connection is in login processing, flushing PDUs
had been done by tight loop. Login processing will not fill out
send buffers but we can use poller to flush PDUs as same as when the
connection is running iscsi_conn_flush_pdus().
Hence change the check condition to include INVALID state to use
poller in iscsi_conn_flush_pdus().
This change is necessary because the subsequent patches will change
iscsi_conn_flush_pdus() not to flush PDUs when the connection is not
invalid or running.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I543a912bf1aa957df7033184ce5989ac92367e49
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470702
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We can remove the declaration of iscsi_conn_stop() by moving
the related functions before the caller to iscsi_conn_stop(),
_iscsi_conn_check_shutdown() and _iscsi_conn_destruct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia86f6685c9e90692d8dae744495bd6f8fc310990
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
USE_RANDOM is not defined anywhere in SPDK since long ago. Hence
remove the code included if and only if USE_RANDOM is defined in
lib/iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0481f938fef2df21af49a2755b3c1fe0dbcaee36
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The subsequent patches will merge spdk_iscsi_read_pdu(),
spdk_iscsi_execute(), and iscsi_conn_handle_incoming_pdus() into
a single function by introducing state machine.
Current ordering will create unnecessary function declaration.
Hence move spdk_iscsi_read_pdu() down to the next to
spdk_iscsi_execute() to avoid it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I289ebcfc20d90753545ab9500b64fd93ca9dfb6d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470284
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_iscsi_task_response() is for not management task but for
I/O task. Hence locating it in the middle of management task
functions is not easy to understand.
spdk_iscsi_task_response() has close relationship with
iscsi_transfer_in() and hence move it up to next to
iscsi_task_transfer_in().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib81c11164168d48885a176b6d54771528c79b70c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move iscsi_queue_mgmt_task() down in the file to close to the
location that uses it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9c39a9211f0bf01165abebfba7a2eb846c10284f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move spdk_iscsi_send_nopin() up to the location just above
iscsi_op_nopout().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8792f838ac482d93ae347a355c7964f587e78daf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move get_transfer_task() up in the file closer to the location
of related functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7ca7fff3e193367992d556d4cd28ef65efe55ef2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470268
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move get_scsi_task_from_ttt() and get_scsi_task_from_itt() down
in the file close to the location that uses them.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5218eac3fda85e238d40eed7282d126ebe81c16b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470267
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Double pointer is clever but reference to pointer is easier to understand
because it may be familiar and reference to pointer has been used
for alloc_len and cid in the same function.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b8f886bd99d3ab5b9c82c72a040816b398b308f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move session related functions, spdk_free_sess(), create_iscsi_sess(),
get_iscsi_sess_by_tsih(), and append_iscsi_sess() up in the file,
and them remove declaration of create_iscsi_sess() and append_iscsi_sess().
This makes the structure of the source code more top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I30f948abc1630b82afbdca512089d950ec73df05
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove declaration of iscsi_reject(), and move it up in the file.
This makes the structure of the source code more top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4b812bf200bba86c58c84c504134bbe7afe1e967
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unnecessary declaration of remove_acked_pdu(), and move it
down to just above the caller, spdk_iscsi_execute().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4af2c9707735669f3baac1fa6fee9bcaaa1cd64f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470263
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Group iscsi_send_r2t(), iscsi_send_r2t_recovery(), and
iscsi_remove_r2t_pdu_from_snack_list() to the following ordering:
iscsi_send_r2t()
iscsi_remove_r2t_pdu_from_snack_list()
iscsi_send_r2t_recovery(),
move the group to just above add_transfer_task(), and then
remove declaration of iscsi_send_r2t() and iscsi_send_r2t_recovery().
This makes the structure of the source code more top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I473ba13a1ac656d4a4553c7e2ac8bae463a6d441
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We can remove unnecessary function declarations and make the
structure of the source code top-down.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8d00c6cec0c0d05a6cd3b70e92062ce9c315ff3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
LUN hot plug was not checked after aborting SCSI Data-In tasks.
This patch is for the Github issue #938.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I131f9944d71e5fdab53f3010072ea7ed5293158c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add an new RPC iscsi_portal_group_set_auth. This RPC overwrites
the setting of CHAP authentication for discovery sessions by the
global parameters specific for the portal group.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I01578b2d01e3dbed599db10340d5053fb0a3738d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is another preparation to support per portal group CHAP authentication
for discovery session.
Add CHAP params into struct spdk_iscsi_portal_grp, and initialize them
by global parameters at spdk_iscsi_portal_grp_create().
Copy CHAP params from portal group to connection at spdk_iscsi_conn_construct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ecb812266ac3d090f8e6db21d1d6a090f1811d9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to support per portal group CHAP authentication
for discovery session.
Previously require_chap, disable_chap, and mutual_chap had been set
and used in iscsi_negotiate_param(), and chap_group had been set
and used in iscsi_get_authinfo().
If a connection is in a discovery session, the connection can get
all CHAP params at its creation, spdk_iscsi_conn_construct().
If a connection is in a normal session, the connection can get all
CHAP params in iscsi_op_login_negotiate_chap_param().
Each connection is in either discovery session or normal session.
So the following change is possible and is done in this patch.
spdk_iscsi_conn_construct() sets all CHAP params of the connection
by global parameters. Then iscsi_op_login_negotiate_chap_param()
overwrites them by the corresponding target's parameters.
iscsi_negotiate_chap_param() and iscsi_get_authinfo() just refer
the CHAP params.
Besides, iscsi_get_authinfo() changed to call just
spdk_iscsi_chap_get_authinfo() inside, and so inline
spdk_iscsi_chap_get_authinfo() into iscsi_auth_params() and then
remove iscsi_get_authinfo().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8028673cc6923e1b8bc20af55e0c3cc933972fc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Parameter 'MinConnectionsPerCore' was removed in last release and marked
as deprecated, now we will deprecate 'MinConnectionsPerCore' finally.
Change-Id: I613a371e8b5352dfb84f8e4293805b792020c643
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Purpose: Prepare for the further optimization work
to use one bigger buffer to read more data for
reducing system calls.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie92603b09308bd3149263269fdec355b67251b37
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The socket now automatically sets the recvbuf size
to 2MB, so this isn't necessary.
Change-Id: Id2196f4038f6835118047233f18c0395fa3f2670
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
One recent commit destroyed the critical bug fix for LUN hot plug.
Hence this patch restores the critical bug fix. Simple revert is
not possible because connections are assigned to poll groups
instead of cores now. But we can revert easily because earlier
version of the recent patch did that.
Fixes#925
The github issue was caused by commit 8cf1945432.
The bug fix restored by this patch is commit 1f6a78620d.
The reference we can follow to create this patch is earlier version
of commit fb641c4b54.
Reported-by: yidong0635 <dongx.yi@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie1ba14a59ce48149a8474cbffc56aa08adc1fc4d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By adding this file and modifying the way we define a couple of
variables in the makefiles, we can actually avoid having to redefine
the library dependencies on a per file basis.
Change-Id: Ieab4aa1021b0341fc21e3b65677a9ad7f70559c2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Part of a larger series simplifying the library directory.
Change-Id: Ib9c9dc9a0c92ac35a9f0260451f97fc126d10031
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
portal_host and portal_name were added to struct spdk_iscsi_conn long
ago but had not been used yet. Portal group and its portals can be
removed dynamically even if there is any binded connection. Using
cached pg_tag will avoid potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56d02664a3e8b2398bbb9162b1c85856e991b5b4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
pg_tag was added to struct spdk_iscsi_conn long ago but had not
been used yet. Portal group and its portals can be removed
dynamically even if there is any binded connection. Using cached
pg_tag will avoid potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic7a96ef97c3cab7e5a58aa7f439364b53694a1e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcd631bf318ef6ece4ac337219652323ca5fd8f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the next patch which will change portal_host
and portal_port from malloc to fixed size.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0f95d969edfd88efde41a43eaf0426fcd4b98987
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464135
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
conn->target is initialized to NULL in iscsi_op_login_phase_none
and then configured in iscsi_op_login_session_normal. Hence
subsequent references to target node can be done by conn->target and
related local variables can be removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I68b94cb8e136522ef1e0ed74c0035ec2b666bb9e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI poll groups are bind to SPDK thread through IO channel now.
This patch changes get_iscsi_connections RPC from synchronous to
asynchronous by using spdk_for_each_channel.
Core ID was removed from the output of the RPC but thread name
is added to the output of the RPC in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20fdb7f11434acf838a89435ba5052b19869181c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Factor out writing connection information to JSON context into
a helper function spdk_iscsi_conn_info_json.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3e92bcb4f21cc7a36af182f850c944b8c5dd559f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463568
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch binds poll groups to SPDK thread through IO channel and
assigns connections to poll groups instead of cores.
iSCSI subsystem registers iSCSI global object as an IO device, and create
poll groups as context of IO channels of the IO device.
Each portal get and hold portal group on which the corresponding acceptor is
running.
When a connection is constructed, iSCSI subsystem assigns a poll group
to the connection by getting it from the corresponding portal.
When a connection enters full-feature phase, iSCSI subsystem schedules
the connection to a poll group by round-robin.
Then, each connection can know its running SPDK thread directly and can
use SPDK message passing infrastructure instead of SPDK event framework.
By this change, iSCSI connections are binded to SPDK thread, and not
binded to processor core anymore.
Some other changes in this patch are
- core ID is removed from the output of get_iscsi_connections RPC. The
upcoming patches will change the RPC to use spdk_for_each_channel and can
access SPDK thread safely, and add SPDK thread ID instead.
- utilize UT multithread framework added by the last patch to test
iSCSI poll groups by UT.
Change-Id: Iec73c778aa413bcabdb63141cc41d4160911ea0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463359
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After recent changes, that function can not return
NULL anymore, so remove all redundant checks from
various SPDK libraries.
Change-Id: If80344b6fa81ad5f87a7086804dba221522cd7e2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is in the patch series to migrate iSCSI connection management
from core based to SPDK thread based.
The callback to hot removal of LUN, iscsi_conn_remove_lun, is called
on the same core when the corresponding LUN is opened. Additionally,
all operations in iscsi_conn_remove_lun are completed synchronously.
Hence inline _iscsi_conn_remove_lun into iscsi_conn_remove_lun.
Add assert to check the function is called on the specified core.
This change is helpful to achieve the goal of the patch series
because spdk_event can have two parameters but spdk_msg can have
only a single variable, and hence we cannot convert simply and have
to introduce a context allocated dynamically otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaebf18265dfe839f7361b09539527a1806aed1c4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Connections will soon be assigned to poll groups, which will be
dynamically moved between CPU cores based on load. It no longer makes
sense to restrict certain portal groups to specific cpu cores in this
model.
Change-Id: Iee983d75febc9797aa60021c5bc0680335e895cd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463358
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_sock_group_poll() and spdk_sock_group_poll_count() had returned
0 on success. The implementation didn't match the specification
described in the header file, and couldn't be used to collect stats
correctly because 0 means idle.
This patch fixes the return value of spdk_sock_group_poll() and
spdk_sock_group_poll_count() to return number of events and
the callers not to overwrite the return value by 0.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e2a17187fc74ea44d3acf2f35d63f5e5a254eda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And also add spdk_sock_group_get_ctx function
Change-Id: I2a2a58b0588ff7d99d3538ea0a633a3b8c7a234b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Since spdk_iscsi_conn_read_data() can print error log, so we
don't need to print again in the caller, existing code will
print error log for LOGOUT and DISCOVERY cases.
Fix issue #845.
Change-Id: I547d3d667b6412ab6a59c9b401d0f28c5026307d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460110
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Define maximum port number of portal to be 32 and use fixed size string
whose size is 33 for spdk_iscsi_portal_grp::port.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie1fcdbd45ce000a9c1c53761195697555b8d030a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Using malloc'ed string for string in iSCSI target has caused
scan-build error.
Define maximum IP address of portal to be 256 and use fixed size string
whose size is 257 for spdk_iscsi_portal_grp::host.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iceeae94e250ea426f72ff72355a213606308da51
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
