If during a channel creation, an error happens, due to incorrect parameters
e.g. wrong pool / container name, or some other internal DAOS errors (like
reaching CART context limit), bdev_daos_io_channel_create_cb() signals
about such errors, however, spdk_io_device_register() does not takes them into account.
The device creation succeeds, returning successful RPC response and leaving bdev
in the bdev lists but it's completely unusable and not amendable.
This patch tries to detect it early and return an RPC error on failure.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I04758e6243566b4e619a1420aa7c01f6041441a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15168
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For write, verify DIF/DIX before submission and for read, verify
DIF/DIX after successful completion.
As same as the NVMe bdev module and the NULL bdev module, DIF/DIX
verification is done based on the DIF type and DIF insert/strip is
not supported.
In near future, the bdev I/O APIs bring an I/O flag to the underlying
bdev and the malloc bdev module will be able to decide DIF/DIX
verification based on the I/O flag.
One important feature is to setup protection information when
creating a malloc disk. Otherwise, all initial reads will fail
if protection information is enabled.
For users, add some explanation about the dif_type parameter
into doc/jsonrpc.md.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I93757b77c03cade766c872e418bb46d44918bee2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14985
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The malloc bdev module supports both of interleaved and separated
metadata in this patch.
Different from the NULL bdev module, opts->block_size is a data block
size and a block size is caculated internally as a sum of
opts->block_size and opts->md_size if opts->md_interleave is true, or
opts->block_size otherwise. This will be more intuitive. Additionally,
opts->md_size accepts only either of 0, 8, 16, 32, 64, or 128.
Protection information (T10 DIF/DIX) will be supported in the
following patches.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icd9e92c8ea94e30139e416f8c533ab4cf473d2a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Define a options structure, malloc_bdev_opts, and use it directly for
the bdev_malloc_create RPC. To do this, bdev_malloc.h includes
bdev_module.h instead of bdev.h to have the definition of the struct
spdk_uuid, and the struct malloc_bdev_opts has a instance of struct
spdk_uuid. Clean up file inclusion together. Furthermore, use
spdk_uuid_copy() to copy uuid from the malloc_bdev_opts to the malloc
disk rather than the = operator, and remove a duplicated size check.
These are helpful to add more parameters for creation.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ief25f12586c21b1666180ce10cfc6256ede8eba9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14982
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If we use a custom decoder for malloc disk's uuid for the
bdev_malloc_create RPC, the code is simplified. Furthermore,
when we add an options structure, we will be able to include
the options structure into struct rpc_construct_malloc directly.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib36fa628569f973218f2cc5ce65a51181cd9fb71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
spdk_nvme_probe_poll_async() can only return 0 or -EAGAIN.
But the code currently indicates that other values might be
possible - so change the code to remove that confusion.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8e7b2e1183f6650043dd751d610d434d626efa7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change 'bdev_nvme_compare_trids' to name 'bdev_nvme_check_secondary_trid'
and 'bdev_nvme_compare_namespaces' to 'bdev_nvme_check_secondary_namespace'
which better explain the aim of these function.
RPC bdev_nvme_attach_controller only response "invalid parameter"
if the path is not sucessfully added due to not meeting the conditions
in bdev_nvme_compare_trids. Add more log.
Change-Id: If9ba6ec1d397d49689aa2ed6ab74fbfa96e16afa
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14251
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
A new `oclass` parameter allow to specify DAOS DFS object class that is
responsible for data redundancy and protection.
Examples of the object classes could be found here: https://github.com/daos-stack/daos/blob/master/src/include/daos_obj_class.h
The default value is OC_SX for the max IOPS.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: Ia48681832458c2266eb7c3bcae0df2055e59e309
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15006
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Support Aio bdev 'readonly' option in RPC call. The read-only flag
can be dumped from the bdev info. Any writes on a read-only aio bdev
will be fail.
Signed-off-by: Yuhua <yuhua@smartx.com>
Change-Id: I939f72479f8953a3678a8df3083ecce0f96844fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14955
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If the module stop handler is asynchronous we must wait until it
finishes before unregistering the io_device.
Change-Id: I149b716d9f4b0c1680b3e43b395fc9ec5b90d70c
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14717
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement support for full stripe writes without parity calculation.
The size and alignment of write IOs must be a multiple of full stripe
size. To reflect this, the raid bdev's write_unit_size is set
accordingly. We rely on the bdev layer to split larger IOs based on
that.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I6940280ad870f3bd678fd19346b06ba4bdadd52e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Let the raid modules create their own IO channels by implementing the
get_io_channel callback.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Id4f6c90721474edd70a6e987c67f8f774737da27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move device cleanup to spdk_io_device_unregister() callback. This fixes
a case when the device would be freed before its last io channel was
closed, leading to use after free condition.
Repurpose raid_bdev_free() to actually free the bdev.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Ib667b4d5ac1b34a0f2dda69f6b0775d9363dbfee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11398
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Depend on bdev layer to send down chunk sized IOs, based on
optimal_io_boundary.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: Iec45f4917117d35c3a9e807940e49091dfcba870
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix for the issue 2702.
spdk_bdev plugin crashes while handling xnvme devices.
xnvme_queue_term gets invoked after the bdev_xnvme_free executes and
frees the xnvme structures. xnvme_queue_term references the xnvme->dev
structure, after it is freed, resulting in a segmentation fault.
Implemented a bdev_xnvme_destruct_cb, that frees the xnvme structures
after the xnvme_queue_term invokes and the device is fully unregistered.
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: I9338c84baf4b61ec2e0d324e67bfefcb96485156
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Identify and properly handle conventional zones (in smr drives) by using
zone type and WP state. Bdevs supporting zoned devices(like uring, nvme and
vbdev_zone_block) now update the zone type information. As a result, the
fio plugin now uses this info instead of hard coding the zone type.
Also adds new WP state(ZONE_STATE_NOT_WP) for handling zones w/o WP.
Signed-off-by: Indraneel M <Indraneel.Mukherjee@wdc.com>
Change-Id: If031e0742d68c55c35e95ddc33d478939bbd52fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Fixes#2708 for io_uring_cmd.
This is a minimal approach to enabling polling for bdev_xnvme. Ideally,
more would be done, however, there are several blockers to remove when
doing so. Thus, this commit only enables polling on
io_mechanism=io_uring_cmd.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Ifa604b52bb2b924fab4b559fae06f26a3574db42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14679
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A new parameter io_drain_timeout has been added to spdk_bdev
structure. If this value is unset, the bdev reset behavior
does not change.
The io_drain_timeout controls how long a bdev reset must wait for IO
to complete prior to issuing a reset to the underlying device.
If there is no outstanding IO at the end of that period, the reset
is skipped.
Change-Id: I585af427064ce234a4f60afc3d69bc9fc3252432
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14501
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
After a controller was hot-removed, if a reset sequence started to
the controller, spdk_nvme_ctrlr_disconnect() failed and caused core
dump in debug mode.
When implemented, how to cause the failure and how to process the
failure were not clear. Hence assert was added to detect the
failure.
We know how we cause the failure now. Let's handle the failure
appropriately.
If spdk_nvme_ctrlr_disconnect() fails, we are on the nvme_ctrlr->thread.
Hence call bdev_nvme_reset_complete() with failure immediately.
Even if spdk_nvme_ctrlr_disconnect() completes synchronously, the
completion callback is executed asynchronously when polling an adminq.
Hence set the completion callback only if spdk_nvme_ctrlr_disconnect()
succeeds.
Fixes issue #2632
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I11f61853aba9eca2515592f964a291e59def7247
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By a recent improvement, failure of I/O qpair creation is ignored
if the nvme_ctrlr is being reset or scheduled to reconnect.
However, failure of I/O qpair creation is not ignored if a new I/O
channel is allocated. It is normal to allocate a new I/O channel
when a nvme_ctrlr is being reset or scheduled to reconnect.
Fix this bug by relaxing the condition to ignore the result of
bdev_nvme_create_qpair() to if reconnect_delay_sec is non-zero and
bdev_retry_count is non-zero.
If reconnect_delay_sec is non-zero, reconnect will be tried sooner
or later, and if bdev_retry_count is non-zero, submitted IOs will be
queued until it succeeds.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icf26e1ea65d292f9b8d24966abe25907d2cc33ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14446
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add gathering of some performance counters and RPC for printing them.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I2e77d37fb66459240ff2e241f2b1f77c60f4eef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13390
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
config_json callback is used to preserve all
bdevs that were created during application runtime.
xnvme bdev module was missing this callback.
While here, io_mechanism is now saved in the bdev_xnvme
structure for reference in the config_json.
Haven't seen an option to pull this from xnvme itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a88ad2bb761f589d214fec8f0690c38572824d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14116
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If res = 0, do not pass this value directly to bdev io completion function,
otherwise it will be treated as a successful completion.
Fix issue: 2679
Signed-off-by: jun.ran <ranjunsh@163.com>
Change-Id: Ice525de1bb5b0ada9ac30d3b59e5c731419efe2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14364
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Two functions have been added to implement bdev io type
SEEK_DATA and SEEK_HOLE. Blob functions to find next
[un]allocated io_unit are used
Signed-off-by: Damiano Cipriani <damiano.cipriani@suse.com>
Change-Id: Ic3be3c0c86bd3010a23ba2681f0f00c62abcaaba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14362
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adding `psk` field to `spdk_nvme_ctrlr_opts`
Adding `psk` parameter to `bdev_nvme_attach_controller` RPC
Change-Id: Ie6f0d8b04ce472e6153934e985c026acded6cdfc
Signed-off-by: Boris Glimcher <Boris.Glimcher@emc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
the calculation (offset_blocks + num_blocks - 1) didn't check if num_blocks is 0
which it is in case of flush.
in flush case, offset_blocks was also 0, so we got (-1) and we got big unsigned number.
just replace it with (offset_blocks + num_blocks - (num_blocks > 0)) to solve the issue.
NOTE this is only fixing the wrong math, there might be more issues that outside the scope of this commit
for example, if flush(x, y) called, no bdev implementation really use those values, and all bdevs just flush the whole disk
also, a convention is that fluch(0, 0) should flush it all (but like I said before, all bdevs flush the whole disk anyway)
Change-Id: I7e991653bc3050349dc155365b2c37ecc2d6b24c
Signed-off-by: Amir Haroush <amir.haroush@huawei.com>
Signed-off-by: Shai Fultheim <shai.fultheim@huawei.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13579
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Trim is now also available as a management operation via RPC.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I05b778a611e9809a14bfed50b01986bb4649a35c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds ability to send trim commands to FTL - only 4MiB aligned requests (both
for offset and length of request) will be processed. During a trim
operation an L2P page (containing 1024 4B entries, 1 per user LBA; which
is where the 4MiB alignment comes from) will be marked as unmapped.
After this point any L2P access to that page will actually set the
entries themselves as FTL_ADDR_INVALID. This is done to make the trim as
fast as possible, since for large requests it's probable that most of
the L2P pages aren't actually in DRAM.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I4a04ee9498a2a6939af31b06f2e45d2b7cccbf19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
the current timeout parameter of the interface bdev_iscsi_set_opts is
duplicated with the timeout parameter of the JSONRPCClient parameter,
which may cause the iscsi timeout and JSONRPCClient parameters to
overwrite each other.
Signed-off-by: gongwei <gongwei833x@gmail.com>
Change-Id: I96604a7e1a495ac2e99518812297230680df42fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
These checked parameters are necessary themselves even for single path
configuration.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie1eb2f51eeec1dbc634c6bae462a41d4c209d6ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Community-CI: Mellanox Build Bot
Clean up the code by using a custom decoder. Use multipath mode to
follow doc/nvme_multipath.doc.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie1f4109dae3a2929dcf933939a9c1b67bece0caf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12051
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Previously, reset just set a long timer to wait until all inflight
I/Os complete.
As already noted as a TODO item, check if any I/O is still inflight
before completing the reset by using a new API
spdk_bdev_get_current_qd().
The RBD bdev module can count outstanding I/Os itself but is not
efficient.
Signed-off-by: liu-darong <liu.darong@xsky.com>
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iecaf90b06cae8e21198ec3822b978b54f5404d2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Dong Yi <yidong0635@126.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
hexlify and unhexlify utils from vbdev_crypto.h have been moved so that
they could be included and reused outside of vbdev_crypto module.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: Ia074250176907f4803b84024239ecd4e9d8a5fc1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
`v2c` helper function returns -1 on error, hovewer its return type was
char - which may cause an overflow situation on architectures where char
is interpreted as unsigned char, which was reported by the CI.
The return type has been changed to signed char.
Signed-off-by: Blachut, Bartosz <bartosz.blachut@intel.com>
Change-Id: I84f5784b2de7d681f78c69b5f3646e851e8dee88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
The word engine was both used (interchangeably with module) to refer to
the things that plug into the framework and to the framework itself.
This patch eliminates all use of the word engine that meant the
framework. It leaves uses of the word that meant "module".
Change-Id: I6b9b50e2f045ac39f2a74d0152ee8d6269be4bd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
L2P cache allows for partial storing of L2P in memory, paging in and out
as necessary, lowering the total memory consumption.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Change-Id: I727fec9d2f0ade4ca73e872d62a2ec10cfdb0a88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13353
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_create_bdev_channel_cb() did not initialized the multipath
policy of the newly created channel. 0 was active-passive and hence
multipath policy was always initialized to active-passive.
Fix the bug and add unit tests for verification.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6e44108740da4b9ff72311ae4b5500558c65c5c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Admin passthrough supported retry and failover as same as I/O by
using the bdev_retry_count. However, doing retry or failover for
admin passthrough may have unexpected side effects and its value
is not clear. The safest way is to limit retry and failover for I/O.
If we need to support retry and failover for admin passthrough,
restore the code and add a new option bdev_admin_retry_count.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I680513a40a80041f6ea6f546c74c672f2a81812d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14227
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Abort is used usually for error cases. When abort is done, controller
may not be available. At completion, controller availability was checked
prior to aborted by request. Hence if abort is done when controller is
not available, the aborted request is retried.
Fix the case in this patch.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I3e7b356797dd50faed0e5113f6f7a47fea26d9cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14098
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds API for fast shutdown - the ability for FTL to skip most
of the metadata persists made during clean shutdown, and relying
on their representation in shared memory instead. This allows for
faster update of SPDK (or just FTL, assuming no metadata changes),
with downtime reduction from 2-5 seconds to 500-1000 ms (for
14TiB+800GiB base and cache drives).
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: I5999d31698a81512db8d5893eabee7b505c80d06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
