Using hardcoded path of /tmp/spdk was a bit problematic due to the
way how CI mixes root permissions with non-root's during test
execution. As an example, see:
https://review.spdk.io/gerrit/c/spdk/spdk/+/2560
Instead of using /tmp/spdk as a fallback, always try to create tmp
directory by generating its path via mktemp(). This way, as with
"autobuild: Use mktemp() for spdk workspace (ae730042)", different
permissions shouldn't be an issue anymore.
Lingering tmp directories will be purge at each set_test_storage()
run.
Change-Id: I93bc60c97b68e66606e98fc83463074fc020e372
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3238
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds waitforblk() after rebinding the driver.
If timing was unfortunate, it was possible to issue
id-ctrlr command to a device that was not yet ready.
Meaning the support for fw command was not read properly.
No error was reported due to "set +e", so this patch moves
it till after id-ctrlr.
Example of the error:
# get_nvme_ctrlr_from_bdf 0000:82:00.0
# readlink -f /sys/class/nvme/nvme9
# grep 0000:82:00.0/nvme/nvme
# bdf_sysfs_path=/sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9
# [[ -z /sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9 ]]
# basename /sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9
# printf '%s\n' nvme9
# nvme_name=nvme9
# [[ -z nvme9 ]]
# set +e
# ctrlr=/dev/nvme9
# ns=/dev/nvme9n1
# /usr/local/src/nvme-cli/nvme id-ctrl /dev/nvme9
# grep oacs
# cut -d: -f2
/dev/nvme9: Resource temporarily unavailable
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5728a5062cd553eb39d18d9869fdf56319a27777
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2950
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Accidentally, checkout command was included in said path, remove it.
Change-Id: I3d497b90552ddcc14be4a45b8794f79e185cfb9f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3196
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
$rootdir is used already in this script, but couple instances
were left out.
We should always point to $rootdir or $testdir when refering to
scripts and test files.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifeb4527c6fd42881a6e04c1406a765f57498ae7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2937
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Usual way to call get_nvme_bdfs() is to iterate over resulting bdfs.
When no bdfs are returned, most of the scripts do no not execute tests
at all and assume success.
Instead of adding error checking for each and every script for no bdfs,
this patch makes get_nvme_bdfs() exit with test failure.
This assumes that there will never be a test that expects no devices
to be present.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e41a885c76ce6cc248fb076bc4f4efd4695ff3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Only spdk/nvme-cli fork with spdk-1.6 branch is supported.
Even then this will be deprecated at some point in the future,
in favor of nvme-cuse.
This came up when fixing the tests to actually run.
If unsupported nvme-cli is used, compilation succeeds and tests
fail at the functional test part with non-obvious message :
# ./nvme id-ctrl 0000:84:00.0
0000:84:00.0: No such file or directory
Some of the CI machines need to be updated, but this
check will make it easier to gauge what went wrong.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia19121a6c49b9618b8fea9e13304e27089f13dcf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
nvme-cli tests with NVMe-oF could be silently skipped,
based on presence of the repo on system.
This patch makes it a requirement for tests to run,
and with that builds nvme-cli.
fixes#1469
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I581df5a00988b775e54110f718b95beb88487145
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2970
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe tests compiled the nvme-cli, but turns out that
NVMe-oF did not. This patch moves compilation to
common script. Meanwhile next one will use it in other tests.
Additionally return to the original directories with
pushd & popd.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica60775a9b8e4347bed28d4c9dfae1acab2cae9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tests should always have a reference to $rootdir absolute path.
Before this change, result of this function depended on current
working directory.
Test like test/nvme/spdk_nvme_cli.sh where directory was changed,
would fail.
With this change the path to get_nvme.sh script should always be
correct.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id555188f032e179eedd406463446a85e13234b6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2936
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
There are a lot of files in the nvme-cli repo on system that
either build up (*.core) or produce misleading logs (*.gcda).
This patch cleans the nvme-cli repository before compiling.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f169b9eaef2dc91b14b324a63b338611f82a6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2949
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tests do not work on OS other than Linux, instead of
going through whole script - exit early with error.
Took this chance to move staring the stub, till after
nvme-cli compilation succeeds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5659888527bc2c25ab10bd871f7820b13f02e3fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2947
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This patch is used to enable uring test in some VMs or machines
in the CI pool.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I75c2ad477f5f648289d8dbb344b75b2408d56a38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
headers can be installed in different directories but `/usr/include`
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
Change-Id: Ibc4641813f6f1c904560dfe7d05cb9b40109cea7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3134
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The length of a keyed SGL data block is limited by 3 bytes.
Add a check to fail requests which length exceeds 3 bytes.
In other case we can send an incorrectly formed SGL request with
an invalid or zero length.
Fixes issue #1450
Change-Id: I77cdaff5fbf4be5754a3ac6008b8ccd532ac5905
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3056
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is possible to have yum on Fedora (either manual install
or via upgrade), yet dnf is the default pkg manager there.
Re-order the list of checks to pick dnf first if available.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I48dfda2a248a7798c9d0c8b3cb4b8a3aa615e2a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Exit early from script execution when unsupported pkg manager is found.
Just not before the "--help" has a chance to be called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I176bf5778dd7b2bc510f54842202113c8614a9d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3054
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When trying to find out parameters through "--help",
the $PACKAGEMNG is "undefined".
So the output from help does not make sense.
Change it so that the help message uses $package_manager that
was detected.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia7ac47dec810588dfa01441b35204a7bf13280ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3049
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Removing verify_add_nvme_bdev_rpc_methods test from
rpc_config.py.
bdev_nvme_attach_controller RPC call is frequently used in
a lot of other low-level test cases. Also this test case
fails when run on a VM with multiple NVMe disks containing
0-namespace and OCSSD emualted NVMes, which is most
probably a result of a very generic regex used to obtain
NVMe BDFs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I091cc7fa4b426784136cda7423f829dc4a82eae0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3111
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The 65b8c30d meant to use exec as a mean to "reload" the running
shell, however, exec simply replaces running bin image with a new
one, in this case, another shell. Since this call doesn't return
(unless it fails) this would suddenly leave the caller of the
vm_setup.sh inside the interactive shell.
Instead of re-executing the shell, simply export new PATH pointing
at where new git binary should reside.
Change-Id: I9ab5ba7f8f88602160c8be0f017477e0d1a01c08
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This mainly concerns QEMU compilation. For system which have installed
tsocks, vm_setup.sh always tries to pass --with-git to QEMU's configure
even when tsocks is not really used (it determines that based on $CONF
which by default has tsocks enabled and presence of the tsocks binary).
Since in that scenario qemu compilation would simply fail, allow user
to force vm_setup.sh into simply ignoring tsocks alltogether.
This is an alternative for a change which potentially could break the
compatibility by removing tsocks from default $CONF list (I guess there
may be some systems out there that relay on tsocks and its default setup
in the $CONF).
Change-Id: Id3583357878002c79e1a554df664c297a0e39cb3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Since most of the sources are executed in a background, there's a
race happening between different instances of package maangers
which are called to install extra packages (for QAT and QEMU).
This mainly concerns apt-get which will not wait for locks on
given files to be released, it simply exits when they are still
held.
To avoid this, simply install all the extra packages from a separate
function before calling routine for a given source.
Running these builds in a background is still not safe in that regard,
since code of the actual source may want to perform a similar tasks,
however, this patch should at least mitigate the issue in its current
form.
Change-Id: Iede83793e1cc739cd3bc5dd4dee90f9c81d55f63
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
In case vm_setup.sh is called on a bare system (e.g. cloud image), it
will instantly fail since gcc won't be on board, forcing user to either
install it by itself or by running our pkgdep.sh first.
Moving this check to pkgdep/git will mitigate similar issues since
before it's sourced, an $INSTALL portion of the script will have a
chance to run pkgdep.sh on its own (this still depends on user running
vm_setup.sh with -i arg, but still ;)).
Change-Id: I309ca42e8ea15fd14e416fc85fa0e244de2d8262
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Make sure that environment is preserved for each call to sudo to, e.g.
make sure proxy configuration is not lost when executing given package
manager.
Change-Id: If221d8d6546fc0ae4f02bc5814b6688c6d78cdd6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Allow to specify a target place for all the git sources and use it
as a full path (instead of cding directly into $HOME). $HOME is
still kept as a default.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idb60ff8f8108368de2ac241971d221142198c89a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2528
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We aren't going to run into any runtime issues when
linking against static libs, but we will when linking
against shared objects, so always test against shared
objects in autotest.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2d3d6e90f5fa4c38b3f44cf35e24b4f7e43b60ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2980
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This gets us ready for the case where we want to run with
shared objects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I84d22cf9def30a27aeb11fcf18eb80080a002ef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3021
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just set it once instead of doing it over and over.
This cleans up the code a lot.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I91c6ea8c02d964693909b9c53795b0f1ee09c90f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2979
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The previous revision to output parsing could
cause issues when more than one set of parenthesis
was included in the output.
fixes: 8661ded761
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1cbfac1186fb5ee97518f4b687f38af59c0dcfb9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
As SPC4R31 5.9.3 "Exceptions to SPC-2 RESERVE and RELEASE behavior" says,
add a SPC2 RESERVE/RELEASE test case when PR is present.
Change-Id: Ibd7e703895cb910637677c6cb28b09e014976e9d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2893
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a test case for SPC2 RESERVE/RELEASE from 2 hosts.
Change-Id: I7b2a6352aa8a90a291f495f059de8920d6cbc11b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some OS(Windows and VMWARE esxi) will send SPC2 RESERVE/RELEASE
commands when formatting the filesystems, but in our previous
implementation of reservation feature, we didn't add such support,
in specification SPC3/4, they all include one section "Exceptions to
SPC-2 RESERVE and RELEASE behavior" feature for compatible support of
SCP2 RESERVE/RELEASE, so we add this support now.
Fix issue #1414.
Change-Id: I65d85ffb3b8f824b0ae4e130f53f01d95735d700
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I59030c4570a03f8c6dfcf4a5f86426e3b5875744
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Perform it inside the a copy instead.
Also, don't copy the repo if target directory already exists.
Change-Id: Icdff80c978c7a8998b113db27bf744503bb29d0f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done in order to not taint the rest of the environment with
autotest settings.
Change-Id: Iad31096aa29d4893200e64c77f2cf22663f0dfc7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2524
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use 512B block size when running nvme_namespace_revert
routine. Need to use this block size because of
vhost_boot.sh test case.
Fixes#1452
Change-Id: I5f41cf2bf9d63b811849a99de6cba9b7b5a1d97d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The old version of this test was using a function
that only detects NVMe drives bound to the kernel
driver so it was not finding any work to do.
Instead use identify to find NVMe namespaces.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I937fc364254a926b8d251ec0cb38ea026593d977
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If for any reason the cuse tests do not revert state
of NVMe namespaces to the original state, the test
machines would be stuck in until manual intervention.
Assumed default state is single namespace,
encompassing available space formatted as 4k block size.
This patch adds nvme_namespace_revert(), which
searches for NVMe devices that support Namespace Managment
and have some space unallocated.
When such device is found, all existing namespaces are removed
and single one created.
Fix#1435
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc3b04b3f166bf450b884674fa6a482e2fbc4c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2829
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the block size is 520(512 + 8) Bytes, we should check the data
length before the tests.
Change-Id: I785e395c9427460238205a52220e8333eee99ec0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2905
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
