Since IV length is the same for all pmd crypto drivers,
AES_CBC_IV_LENGTH is renamed to IV_LENGTH.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: If8769db119eb599a17c267e8950f18f5a0ea995b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11875
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When connection is disconnected, bdev_nvme will call
bdev_nvme_failover, and then reset the controller.
nvme_ctrlr->reset_start_tsc should be updated in function
bdev_nvme_failover, then bdev_nvme_check_xxx_timeout can
work well.
Change-Id: I99b639545e9dd4082cdc14696bb7872cb4917b1d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11957
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When rq is used, rnr_retry_count is not set. As a result, the initiator
cannot connect to the target after some error. Set the rnr_retry_count
to avoid infinite retries.
Fix issue #2429
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Change-Id: Iab03ea5ff10f5a9759c41f26589731aa92ef2f56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11946
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Make use of code implemented in previous patches in the series
to get and set dynamic scheduler values.
Modifiy app.py and rpc.py to accomodate new changes and allow
user to specify scheduler parameters in the RPC calls.
Change-Id: I6173aefbf1d774b91b80ee5bce67eea80a2ab23d
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Creates a JSON on scheduler side to return after .get_opts is called
and parses a JSON on .set_opts call.
The JSON passed to dynamic scheduler on .set_stats is a copy of a
pointer already available during RPC framework_set_scheduler call.
Getting and setting scheduler stats via RPC calls is going to be
implemented in the next patch in this series.
Change-Id: I62880a71066a140c74336a5725e7b10952008e5c
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For RDMA transport, current synchronous qpair disconnect occupied CPU for
a second when qpair disconnect gets timeout.
To remove this limitation, we will do the following:
- make spdk_nvme_ctrlr_disconnect_io_qpair() asynchronous,
- spdk_nvme_qpair_process_completions() returns -ENXIO only if the
qpair is actually disconnected.
Even at this patch, spdk_nvme_poll_group_process_completions() invokes
disconnected_qpair_cb only if a qpair is actually disconnected. This
behavior will be maintained.
To use the upcoming asynchronous qpair disconnect easily, when
deleting a ctrlr_channel, disconnect the qpair, and then free the qpair
and release a reference to the poll group when the qpair is actually
disconnected.
We need to delete a nvme_qpair asynchronously after the corresponding
nvme_ctrlr_channel is deleted and defer the deletion of the corresponding
nvme_ctrlr until the nvme_qpair is deleted. To satisfy this requirement,
utilize the reference count of the nvme_ctrlr.
disconnected_qpair_cb() may call spdk_nvme_ctrlr_free_io_qpair() and
spdk_io_device_unregister() successively. The spdk_io_device_unregister()
will execute spdk_nvme_detach_async() from its callback.
spdk_nvme_ctrlr_free_io_qpair() has to complete earlier than
spdk_nvme_detach_async() starts. spdk_nvme_ctrlr_free_io_qpair() is
executed after unwinding stack. spdk_nvme_detach_async() is executed
after sending a message. Sending message is later than unwinding stack.
Hence the requirement is satisfied naturally.
spdk_io_device_unregister() for the nvme_ctrlr is required to be called
on the nvme_ctrlr->thread. To satisfy this requirement, redirect
nvme_ctrlr_unregister() to the nvme_ctrlr->thread. This change is too
small to stand as an independent patch. So include the change in this
patch.
Change-Id: Id8c01966c40b1dae9c4ef17f1b0b3f60a0bd17d5
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10765
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvme_poll_group has followed spdk_nvme_qpair about how to
process I/O qpair deletion inside of a completion context.
spdk_nvme_qpair_process_completions() accesses qpair after
returning from nvme_transport_qpair_process_completions().
So this is reasonable.
On the other hand, if spdk_nvme_poll_group_process_completions()
can execute spdk_nvme_ctrlr_free_io_qpair() inside of a completion
context, the target qpair is ensured to be deleted after returning
from spdk_nvme_ctrlr_free_io_qpair(). Then the target qpair is
not accessed anymore in spdk_nvme_poll_group_process_completions().
Remove two variables, in_completion_context and num_qpairs_to_delete,
of spdk_nvme_transport_poll_group and the related code.
This change is really necessary to support the following case.
In the NVMe bdev module, a nvme_qpair has a qpair and a poll_group
channel. disconnected_qpair_cb calls spdk_nvme_ctrlr_free_io_qpair()
for the qpair and spdk_put_io_channel() to the poll_group_channel.
spdk_nvme_ctrlr_free_io_qpair() is executed after unwinding stack
but spdk_put_io_channel() is executed now. The callback to
spdk_put_io_channel() calls spdk_nvme_poll_group_destroy(). However,
spdk_nvme_ctrlr_free_io_qpair() is not executed. Hence
spdk_nvme_poll_group_destroy() fails.
Update the corresponding stub in unit test together.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Icd1f1daf049c6c7ffb28790fe87989a1060f8952
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11496
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is another preparation to disconnect qpair asynchronously.
Add nvme_qpair object and move the qpair and poll_group pointers and
the io_path_list list from nvme_ctrlr_channel to nvme_qpair. nvme_qpair
is allocated dynamically when creating nvme_ctrlr_channel, and
nvme_ctrlr_channel points to nvme_qpair.
We want to keep the times of references at I/O path. Change nvme_io_path
to point nvme_qpair instead of nvme_ctrlr_channel, and add
nvme_ctrlr_channel pointer to nvme_qpair.
nvme_ctrlr_channel may be freed earlier than nvme_qpair. nvme_poll_group
lists nvme_qpair instead of nvme_ctrlr_channel and nvme_qpair has a
pointer to nvme_ctrlr.
By using the nvme_ctrlr pointer of the nvme_qpair, a helper function
nvme_ctrlr_channel_get_ctrlr() is not necessary any more. Remove it.
Change-Id: Ib3f579d3441f31b9db7d3844ec56c49e2bb53a5d
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11832
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will have the following changes.
Add nvme_qpair object and move qpair and poll_group pointers and
the io_path_list list from nvme_ctrlr_channel to nvme_qpair. nvme_qpair
is allocated dynamically when creating nvme_ctrlr_channel, and
nvme_ctrlr_channel points to nvme_qpair.
qpair is disconnected asynchronously and nvme_ctrlr_channel is
deleted asynchronously.
To make the following patches simpler, refactor two functions,
bdev_nvme_create_ctrlr_channel_cb() and
bdev_nvme_destroy_ctrlr_channel_cb(). The details are as follows.
Factor out nvme_qpair_create() from bdev_nvme_create_ctrlr_channel_cb()
and factor out nvme_qpair_delete() from
bdev_nvme_destroy_ctrlr_channel_cb(). Then reorder a few operation
in these.
Additionally, reorder a operation in _bdev_nvme_add_io_path().
Change-Id: Idf0328fa77a54f40fe52ca72c3842dde82d55972
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11831
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the following patches, spdk_nvme_ctrlr_disconnect_io_qpair() will
be changed to be asynchronous, spdk_nvme_ctrlr_disconnect_io_qpair()
will be called first and then spdk_nvme_ctrlr_free_io_qpair() after
the qpair is actually disconnected.
We will not be able to keep the current bdev_nvme_destroy_qpair()
function.
As a preparation, inline bdev_nvme_destroy_qpair() and remove it.
Additionally, this patch has the following changes.
Previously I/O qpair was freed and then I/O path caches were cleared.
Both are SPDK thread local. So there is no dependency for the ordering
of these two operations. However, it will reduce the size of the
following patches if we clear I/O path caches before freeing I/O qpair
when the qpair is disconnected. Hence we clear I/O path caches and then
free I/O qpair.
Remove DTRACE for bdev_nvme_destroy_qpair() for now.
It will be restored in the following patches.
Furthermore, fix potential NULL pointer acces in
bdev_nvme_create_qpair().
Change-Id: I0ab78ccb0d240e56b95b53179341afcd909a31f6
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10746
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We want to call disconnected_qpairs_cb only if qpair is actually
disconnected. When we disconnect qpair asynchronously, for qpairs in
the group->disconnected_qpairs list, we want to poll them until
actually disconnected and then call disconnected_qpairs_cb for them.
As a preparation, call disconnected_qpair_cb only for qpairs which is
in the group->disconnected_qpairs list.
For TCP and PCIe transports, disconnecting qpair will continue to be
synchronous for now.
So we change only RDMA transport.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ifaf6157e1e02fa13f52a66409c9e60fc814d71dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11495
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add three options for I/O error resiliency to spdk_nvme_bdev_opts.
Then the RPC bdev_nvme_set_options can configure these.
These can be overridden if these are given by the RPC bdev_nvme_attach_controller.
Change-Id: If3ee23aeef8b7585fe0fb5ec4695df5866fc1e74
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the plugin supports SPDK-created spdk_threads, it needs to
handle those threads being removed at run time.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8dee09bf95d1c8fe80f5793ee5476d3f3e1384fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11867
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Instead of allocating this separately, use the thread context area.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2d5f4d223b15ff663e57f52237b3cc4dab43c291
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
The test script does sequences like the following:
1) Add a host to an existing subsystem on target A
2) Check application B to see if it has received a
discovery AEN and attached to that subsystem
But we have to account for some delay between 1 and 2.
Application B has to receive the discovery AEN, get
the discovery log page, parse the new log page entry
and then connect to the NVM subsystem.
Fixes issue #2420.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I160ed117ccd92bfb848f0075494a0d516b341191
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11934
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When generating a discovery log page, we will add entries
for the discovery subsystem for all listeners except the
one associated with the controller that generated the
log page command. We do this comparison using
spdk_nvme_transport_id_compare().
But this function compares the subnqn of the trid, and
the subnqn is not set in either of the trids that we
are comparing.
The listener's trid always has an empty subnqn, but
the source trid has an uninitialized subnqn when
we do the comparison. This means that sometimes the
subnqn may be empty (which always happens in debug
builds) but sometimes may contain garbage. This
means that sometimes an entry would be added to the
log, even for the trid of the discovery controller
that generated the command (meaning the discovery
controller would end up referring to itself which
is not allowed).
There is an even more subtle issue with this. If the
host reads just the log page header, the nvmf target
generates the entire log page, and just returns the
header contents. Let's say in this case, the source
trid has an empty subnqn, so we don't generate an entry
for it, and report numrec = X and genctr = Y. Then
the host reads the X log page entries. But now the
source trid is garbage, so a discovery log page entry
is returned, replacing one of the "real" log page
entries. And since genctr didn't change, the host
thinks the data is all valid, meaning there's a log
page entry for an NVM subsystem that ends up getting
dropped.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96cfc566ddaf17153aec089bf3d9b3480bec3e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is not in the fast path, so using INFOLOG
instead of DEBUGLOG allows these messages to be
enabled in release builds.
While here, set this flag in the discovery.sh
test script so that we get better information if
there are test failures.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1c0d087b5c0cb40118691f4a1bc16adc2fdaad9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11932
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_close() may not complete synchronously.
Then the following scenario is possible.
ctrlr_disconnected_qpair() calls spdk_sock_close(). Then any request may
complete and call _pdu_write_done(). qpair is still associated with a
poll_group and is inserted into the group->needs_poll list.
After ctrlr_disconnected_qpair() completes, disconnected_qpair_cb() is
called. disconnected_qpair_cb() calls spdk_nvme_ctrlr_free_io_qpair().
spdk_nvme_ctrlr_free_io_qpair() calls spdk_nvme_poll_group_remove().
spdk_nvme_poll_group() removes qpair only from the
group->disconnected_qpairs list.
Even after qpair->poll_group is nullified, qpair is still in the
group->needs_poll list.
Then spdk_nvme_poll_group_process_completions() polls all qpairs in
the group->needs_poll list and hits the assert.
Fixes the issue #2390
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6ede8bd3b7b1a57a34ac61436159975ab6253fbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11882
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Running the whole test_make.sh script with sudo causes "make"
calls in script to also be run with sudo. This may result in
"root" ownership of some of the output files, which in turn
may affect subsequent autobuild.sh stages.
Fixes#2426
Change-Id: I42cdc65153869076ad477d22d97e49d3ca4a9470
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11885
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the req's cb_fn will close the socket, there is heap-use-after-free
error if continuing to access sock.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I88c6adb9d25e52d94b08f53e8ccac611c4d29fff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11855
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The root ports might have been configured by some other driver (e.g.
Linux kernel) prior to loading the SPDK one, so we need to clear it. We
need to before the scanning process, as it's depth-first, so when
scanning the initial root ports, the latter ones might still be using
stale configuration. This can lead to two bridges having the same
secondary/subordinate bus configuration, meaning that their config space
would map to the same memory area, which, of course, isn't correct.
This has manifested in issue #2413, where two root ports were configured
to use the same secondary bus. This caused an endpoint device to be
enumerated twice on two different root ports, with the first instance
being broken once the second port was configured by the SPDK driver.
Fixes#2413
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5ce0931a84c1d23ccadb93fe39e8155ff1281474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow to use these functions without having to instantiate an
instance of vmd_pci_device. The following patch will use this to
perform some initial clean up before the scanning process.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icff92a4a429b259bec13eb6b0c1581aadbaae24d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11862
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently shadow doorbell updates are not counted; add statistics for
those, and rename the other statistic for clarity.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I211a77902e38265c99b15862034c6d022dc582a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11844
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_pcie_qpair_update_mmio_required() is only called for QPs with
shadow doorbells enabled, so we don't need an additional branch here.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idf65f92deb0c6f93019892ef5a02bc28ba4c0f8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11843
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_pcie_qpair_update_mmio_required() qpair argument is unused.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0bd6897eb8e6a06f211cc599ab6045409bb43641
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11842
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change dynamic scheduler parameters from #define to
global variables.
Change-Id: I5bbbf40ac66971bcc24fc8bf0ac5d13efdc7412f
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11447
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The current error handling of `spdk_mem_map_notify_walk` has off by 2
issue. This issue can split one memory region to multiple smaller
regions when calling the callback to unregister the memory region.
Also, in case of failure, the 1 GB maps of the map failed to be freed.
RDMA doesn't support this behavior and support calling the callback only
once for each previously registered memory region.
Signed-off-by: Aviv Ben-David <aviv.bendavid@vastdata.com>
Change-Id: I65b667f2e84533f234a2e330b20e9ad9eef32854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11219
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In test_nvme_free_request, there is valgrind error:
Conditional jump or move depends on uninitialised value(s)
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I80f741cac9316d86b060419e3b6fb651fa018aa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11826
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This shows a similar problem the a9614bf6e was facing. Some cgroups,
especially under v2 + systemd, may have a very small scope, including
very limited number of processes (see comment in init_cpuset_cgroup()).
If they terminate, their cgroups are removed as well.
Change-Id: I0bfc69440f1e7841a7605bc34647f1092cc033aa
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11815
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case collect_driver() returns immediately due to missing modalias
attr, an empty $driver will be passed to check_for_driver() causing
grep inside to fail. Further false-positive then leads to call to
linux_bind_driver() as it's not able to locate proper paths for
given driver.
To avoid this, make sure collect_driver() always attempts to fallback
to a driver setup.sh supports for a target device.
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Change-Id: Id5631a731910f60b63c6afb3a412575bb69d784a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11747
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
That is a preparation for adding memory domains
pull/push functionality which works with iovec
structure instead of pointers
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3d0db3e7b302b45b4e3bae3452bc5ffa3e62db8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At this time only rte_vhost_user makes use of the virtio related
functionality. Which is used by vhost_scsi and will be used by
vhost_user_blk virtio transport.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia159e14ce5f9a74185da9898713deeff76d14f1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11100
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Link spdk-docker-suite to get SPDK users realized that
there is already a good docker usage example.
Change-Id: Ia154061d894b77ba544d83aaffbb94c998f54bde
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11851
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recently, received questions around containerizing SPDK app
or app built on top of SPDK. Containerizing SPDK is more
useful for general SPDK users.
So move it to front in order to avoid SPDK users get confused
or stuck on the Kata one.
Change-Id: I3dc510d0a7bafa63be4559810990d28c5f9d7de5
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11850
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This logic is just what "any" does.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: Id6384e7e284dfabb73f9ecfbc10c40643c3c5177
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11490
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iad2ea681ad8ad234e70c7310b58785a999612156
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The following patches will enable us to specify I/O error resiliency
options per nvme_ctrlr as global options. To do it easier, move
per controller options about I/O error resiliency into struct nvme_ctrlr_opts.
prchk_flags is not exactly for resiliency but move it into struct
nvme_ctrlr_opts too.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I85fd1738bb6e293cd804b086ade82274485f213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11829
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will add options per struct nvme_ctrlr in the
NVMe bdev module. bdev_opts will be used for it.
Additionally, fabrics_connect_timeout_us is set directly to
spdk_nvme_ctrlr_opts. So remove it from the RPC request structure.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I981cda5e69375edc43a8581cd3b43497c38a3d56
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11827
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ib045273238753e16755328805b38569909c8b83a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
The spdk_msg_mempool structure has a fixed size, which is not flexible
enough. The size of the memory allocation can now be changed in the
options given to the spdk_app_start function.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I1d6524ab8cf23f69f553aedb0f5b0cdc9dde374b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11635
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In vbdev_crypto_init_crypto_drivers() when g_session_mp init failed it
was possible to jump to cleanup label but return 0 instead of -ENOMEM.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I128968699b0d2dbb2f769ac5fd7bd53ab409562b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11659
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
_crypto_operation_complete(bdev_io) should not be called in
_crypto_operation() because it is done by caller function
on read or write.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ie03412c72f41abf661b069d4b00eaf74f40261d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11629
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Fixed missed spdk_bdev_module_release_bdev() during error handling.
- Fill the keys with zeros before releasing memory.
- Fixed issue with g_number_of_claimed_volumes that can become negative
because of invalid error handling.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: I4171f4326d87b1d8f886416bf53b0f2043ccbfe7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11628
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The following patch will need it to expand the %{python3_sitelib} macros
when building the RPMs.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2782b228066fa0524d675c8d964217a7c9d11e36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11656
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
