Now that the trace library can handle multiple arguments, there's no
point in passing 0 for tracepoints that don't have any arguments. This
patch removes all such instances. It allows us to to verify that
`spdk_trace_record()` was issued with the exact number of arguments as
specified in the definition of the tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbdb6f5111bd6175e145a12c1f0c095b62d744a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replaced calls to `spdk_trace_record_tsc(spdk_get_ticks(), ...)` with
`spdk_trace_record(...)`, which does the same thing but is more consise.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib96e0bc0225490dadf857e1ddd2a3ecbf71e98c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Thread is private data of spdk_io_channel, bdev should use
spdk_io_channel_get_thread() to access it. This prepares for the upcoming
change to make the definition of struct spdk_io_channel private.
Change-Id: I643c8d677e22f6d8dde2faf91bb2711d3f5d81b8
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The common bdev layer will split large WRITE ZEROES ranges into
multiple children requests based on the backend device's setting,
it will try to split up to 8 children requests at a time to avoid
flood requests.
Also add UT to cover different cases.
Change-Id: Id9505fbe1c297412ef97b1f73587b22bc43f770e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The arguments of a tracepoint are formatted when they're printed now, so
there's no need to append ":" or pad it with spaces.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I74f5568f1982dacc079e3b80bd19a9cd740b48ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ZCOPY emulation is not required. Modules can check if the bdev module
supports ZCOPY. If not supported the module uses the existing
READ and WRITE operations.
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Idac0a4d27a79a6c7e567c420e15637e826c347c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Clean up spdk_bdev_register() to facilitate the upcoming patch which
uses RB tree to speed up bdev name lookup.
* move TAILQ_INSERT from bdev_start() into bdev_init();
* rename bdev_init() to bdev_register() and rename bdev_start_finished()
to bdev_register_finished();
* inline bdev_start() into spdk_bdev_register().
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Idbfc800472bc8c6f9b615046e082772e9f6026e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8043
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Also for the purpose to avoid a burst of children unmap request,
we will submit at most up to 8 children request at a time for
a big UNMAP command.
Change-Id: Iaf0f18b07517e0a8f84dc04e8c93b95691a1a43c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7518
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Both UNMAP and R/W will share the some logic to process the submission,
so combine them to a helper function first.
Change-Id: Ia4f234c6a58f078d3e9f88cacaf1510a17f07acc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7606
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help us to add unmap split function, also
remove bdev_io_type_can_split() because we changed
to use swith(io_type) ... case now.
Change-Id: I449d6a9f5bf2d0b43dd124bbfc9e1ca2afddc15a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7516
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_vbdev_register() was deprecated in SPDK 19.04.
config_text field in spdk_bdev_module was deprecated in SPDK 20.10.
spdk_bdev_part_base_construct() was deprecated in SPDK 20.10.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib795ccdf61154c168032ccf8b81ea77e5e663851
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6628
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For correct behaviour, pthread_mutex should not be locked after it has
been destroyed.
g_bdev_mgr.mutex is statically initialized. It is destroyed in
bdev_mgr_unregister_cb, but not re-initialized in spdk_bdev_initialize.
Repeated calls to initialize/unregister occur during unit tests.
Remove the destroy from bdev_mgr_unregister_cb, which seems
the simplest way of resolving the issue.
The sequence: spdk_put_io_channel(), spdk_bdev_close(),
spdk_bdev_unregister() occurs during unit tests.
spdk_bdev_unregister() destroys internal.mutex which is then
locked by a call to bdev_channel_destroy() resulting from the
earlier spdk_put_io_channel(). Move the destroy and the free of
internal.qos into bdev_destroy_cb so that they don't occur until
all of the channels have been released. Remove the no longer
required bdev_fini.
Repeat calls to spdk_bdev_unregister that occur after an unregister has
completed will lock internal.mutex which has been destroyed by the
previous unregister. This occurs during unit tests. Defer locking
internal.mutex until after the internal.status has been checked for
SPDK_BDEV_STATUS_REMOVING. This is the only place where
internal.status is set to removing and g_bdev_mgr.mutex alone is
sufficient to ensure atomicity here.
Tested with a pthreads library that contains debugging code to
check the mutex state and a modified version of bdev_io_types_test
to call get_io_channel on a different thread.
Suggested-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I81cc46a1b8a766700253829b19cc86c7f0eb79f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6217
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This helps user to locate whether bdev_io fails in
spdk bdev layer or inside Linux AIO.
SPDK_BDEV_IO_STATUS_AIO_ERROR indicates bdev_io fails
due to Linux AIO or its lower layer's failure.
New functions spdk_bdev_io_complete_aio_status and
spdk_bdev_io_get_aio_status can be used to report out
the errno from Linux AIO.
Change-Id: I32640e4a0459cca057278c02ea5a7522f3408a02
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5690
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A small improvement in blockcnt change.
If size == bdev->blockcnt just return.
Change-Id: I507a3e5d5fa0f3f17383afa08c47c0bda48be52c
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5922
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"bdev_register" notification was sent right when register
happened, which was misleading for any listener.
Action on the registered bdev might not have been possible
when examine took longer time.
Order of bdev_register notifications in json_config test
was modified, because they are being sent out as pollers
for the spdk_bdev_wait_for_examine() are being processed.
This is only because pollers are inserted at the tail,
and processed from the tail as well.
Order of notifications should not matter, as long as bdevs
are ready for use.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I45b769f184b386df2daa4152ee766636ef0668ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5213
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since user/orchestration has no chance to call
bdev_wait_for_examine when loading json configuration,
this RPC is now always built into bdev subsystem json.
This behaviour was already there for SPDK_RPC_STARTUP,
see bdev_module_action_complete().
Yet it did not apply to SPDK_RPC_RUNTIME RPCs, as the
bdev module initialization was already complete.
Making sure all SPDK applications finish their startup
when all bdevs are ready to be used. See issue below:
Fixes#1675
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f60f56932da020a15deeef09a5a1544f3a1bae6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5481
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_bdev_wait_for_examine() API to be called
in order to report when examine on all registered bdevs finished.
It will be built in to most bdev modules RPC.
New RPC added to allow
- building it into bdev submodule
- user/orchestration to verify examination status manually
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27db3ae42eea3e692faeea4c2a01d04586bff438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5480
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch moves out check for all module actions to finish.
It will be used further down in the series for new RPC and as
new bdev API.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24ff40de70f5ed1c8582e60dc23146d7bf9380fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5212
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch includes the following work:
1 Add two fields in spdk_bdev_opts structure and make the
two fields configurable.
2 Update the unit test in bdev_ut.c
3 Revise the set_bdev_options rpc call and add the support
to use the two new fields.
Change-Id: Idd6073b3a3ffaba8161e3ffa9444a9e533e67f6d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5664
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change prepares for the potential change in spdk-bdev_opts
in the future in order to maintain the ABI compatibility
Change-Id: I8ce24299173854c14c697bf7e28cf365c23f005f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the backend device supports max segments and
max size, we may need to split the IO if the IO segment
size is bigger than max_size or iovcnt is bigger
than max_segments.
Add unit test for span split
Change-Id: If8e9c4f903b7def0ad7ddec7dc5aab8410498db5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4602
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently only nvme bdev module implements this interface. Bdev module
context (in this case spdk_nvme_ctrlr opaque handle) allows for nvme
interface usage for additional management.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6302c9229d5f7f294a3c1472d9e8dc1519637ffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes function for bdev modules to
present options of the bdevs.
blob_bdev.h refers to the spdk_bdev_module, so would need
to be bumped too.
At this time spdk_bdev_module is left unchanged to prevent
that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3cacb087c998d928c5d8c2722b7f041d82bb43f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4748
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
This patch removes legacy config support in bdev layer.
All options through the legacy config are already reflected in JSON.
Removed configuration can be set via `bdev_set_options` and
`bdev_set_qos_limit` RPC.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24c365625540659cad425268d2aa41e3bf279d5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
spdk_bdev_get_by_name() is included in spdk_bdev_open_ext() and
when we use spdk_bdev_open_ext() for some bdev modules, for example,
pass-through bdev module, the case that bdev is not found in
spdk_bdev_open_ext() is normal.
Hence change the corresponding ERRLOG to NOTICELOG.
Besides, change the wording to "Currently unable to find bdev with name"
to indicate there is a chance that it will be there later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I055bce51d1aa7f005efab28359746f17858dfe48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4589
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For example, for pass-through bdev modules, it is acceptable that
bdev whose name matches is not found when creating a pass-through
bdev.
The next patch will replace spdk_bdev_open() by spdk_bdev_open_ext()
for pass-through bdev module.
spdk_bdev_open_ext() includes spdk_bdev_get_by_name(). Pass-through
bdev module has to know if spdk_bdev_get_by_name() returned NULL
in spdk_bdev_open_ext().
Hence change spdk_bdev_open_ext() to return -ENODEV if spdk_bdev_get_by_name()
returned NULL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I525a7118481586161bd0e8c07b96a887c0a04210
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Add a bdev_examine_allowlist_free function, which releases the members
in g_bdev_examine_allowlist. Invoke it in bdev_mgr_unregister_cb.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I47faf6959066da6679716b2f2abfab8ac8b8dd79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The bdev_examine_bdev api will examine a bdev explicitly. After
disabling the auto_examine feature, a user could call
bdev_examine_bdev to examine a specific bdev he/she wants.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ifbbfb6f667287669ddf6175b8208efee39762933
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3219
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When set bdev_auto_examine to false, the bdev layer will only
examine a device if it is in the allowlist. Currently the allowlist
is always empty. Will add api to add bdev to the allowlist in the
future.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Iee7597623e7dd4172acc88736d23e0e5a4a2b03e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3101
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cache size of mempool is not based on SPDK thread but DPDK thread,
i.e. CPU core. So replace spdk_thread_get_count() by
spdk_env_get_core_count() to determine cache size of mempool in
spdk_bdev_initialize().
Besides, allocate and free stub cores at the corresponding unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc4deae84c74820af4de61e991fa3f8683add058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using not FAILED but ABORTED for the completion status of the I/Os
aborted by reset will be reasonable and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c8181dd33453a330888cffa93505e6fc462f278
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_io is passed to the callback to the timeout I/O, but the context
of bdev_io is stored in cb_arg and spdk_bdev_abort() needs cb_arg.
Hence add an new helper function, spdk_bdev_io_get_cb_arg(), to get
cb_arg of bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5eb25ffdad2467c55a1b55f8cf0accef8799bb4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The last patch ensures that the parent I/O terminate with failure
before continuing splitting process if one of child I/O failed.
This simplifies abort operation for I/O splitting.
Then we can use bdev_abort() and bdev_abort_io() nestedly.
Add necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I562bb6675f1fa380bc53dbe369138317ead66fe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Previously, bdev_io_split_done() had continued splitting process
even if the status became failed. To abort split I/O, this patch
changes bdev_io_split_done() to terminate with failure before
continuing splitting process if the status became failed. Add
necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd1ea49c22523e8c06fb45ebdcb2c84a57afd2ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2234
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to abort split I/Os. To abort any I/O by
bio_cb_arg, they have to be managed by the submitted I/O list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9459d9d2d3511aad0325dcc20d88610444a4ea04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Buffer allocation is done after redirection to the QoS thread.
Hence add a new helper function bdev_abort_queued_io() and add
its call to bdev_io_do_submit() for both buf_need_small and
buf_need_large.
For zcopy API, buffer allocation is done before buffer allocation
but the caller can get bdev I/O object, and can abort the I/O
directly if needed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2d6170de5ab2ba4d260df99db3e376c0e2c5ffaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2250
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Current bdev_abort_buf_io() aborts all queued I/Os due to buffer
pool capacity, and we want to use the name for the new function
which aborts only the specified I/O if queued. So rename
bdev_abort_buf_io() by bdev_abort_all_buf_io() in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I50a4ef1f5c4d2f8db9a0781413520345a7f13e59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2395
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add abort queued I/O due to out of memory into bdev_io_do_submit().
Any bdev I/O is queued due to out of memory only on the submitted
channel.
Aborting queued I/O due to out of memory is necessary only if
shared_resource->nomem_io is not empty.
Checking if shared_resource->nomem_io is not empty has been done
in this function.
However add the abort operation without and before checking if
shared_resource->nomem_io is not empty because the following patch
will abort queued I/O due to buffer pool capacity.
The purpose is to improve readability by consolidating all abort
operations into a single place.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I69a40f096aff13b84c1ed345fa8bd0dd80cef0e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2249
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The following patch will add another spdk_bdev_io_complete() call
in _bdev_io_submit(). Then, factoring out set/clear in_submit flag,
incrementing counts and calling spdk_bdev_io_complete() into a helper
function will be simpler.
in_submit flag is set and clear in bdev_io_do_submit() anyway,
and bdev_qos_io_submit() needs in_submit flag only for
bdev_io_do_submit().
All cases to call spdk_bdev_io_complete() in _bdev_io_submit() are
not performance critical.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb783d7d001a9c36e61d791c664c67fdc46a09e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Current bdev_abort_queued_io() aborts all queued I/Os, and we
want to use the name for the new function which aborts only the
specified I/O if queued. So rename bdev_abort_queued_io() by
bdev_abort_all_queued_io() in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2125d91bffc870a0a4be4bb74037c1d27bce2d36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
The I/O aborted by the abort command should be completed with SC = 07h, i.e.,
"Command Abort Requested". However, if the generic bdev layer or non-NVMe
bdev module aborted the I/O, the aborted I/O would complete with SC = 06h, i.e.,
"Internal Error". To fix this unexpected behavior, add an new I/O status
SPDK_BDEV_IO_STATUS_ABORTED and update spdk_bdev_io_get_nvme_status() to
set SC to 07h if the I/O status is SPDK_BDEV_IO_STATUS_ABORTED.
If the NVMe bdev module aborts the I/O, the I/O status is set to
SPDK_BDEV_IO_STATUS_NVME_ERROR and SC is set as expected.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc99a97248a8d54a8c8d2fab74a90c7ce99c2e6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove inclusion of spdk/event.h from lib/bdev/bdev.c. Its dependency
had been removed before.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icfea104b20172e624574506a41fa92524ebc8627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev_auto_examine flage will impact how bdev layer examine a
disk. If bdev_auto_examine is true, the bdev layer will examine all
bdevs as usual. If bdev_auto_examine is false, the bdev layer will
only examine a bdev if it is in a whitelist.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If5b26283905f97f8a95ae9065226fa3dae6c27a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2114
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
To track the ZCopy IO stats like IOs and Bytes read and written.
Change-Id: Iab2c4d8397aee5d746db9491bd4e8ac4eea69529
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When we unlock a range, we remove the range from the
locked bdev list before doing the for_each_channel
iteration to remove the range from each channel.
But at the same time, right after removing from the
locked list, a new lock on that range could start.
In that case, we also do a for_each_channel to add
the range to each channel, and that will race with
the for_each_channel remove. When the lock start
wins, it finds the range already in the channel,
but doesn't set the owner_range which results in
a seg fault when the for_each_channel completes.
The fix is actually rather simple. We just add the
locked_ctx to the comparison when checking if the
range is already in the channel. If the locked_ctx
matches, then we know it was added as part of
initializing a new channel. If it doesn't, then
we create a new range object pointing to the new
locked_ctx. The first one will get removed when
the remove for_each_channel catches up.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I94f8b20376dd437f404add35744d42fc148303ff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482620
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a locking operation has to wait because of an
existing lock, we queue the lock context. When the
existing lock finishes unlocking, we restart the
queued lock context. But we have to make sure
we restart the lock context on the same thread it
was originally submitted, since it has a channel
associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I555515f3adfc3c13a86584c601ed541d605980b7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482463
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function is required for NVMf implementation
for compare and write fused command.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If41611f5c0b8e4ed8eec66f09858c724f1800d59
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477914
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new function for getting NVMe specific return code
for fused commands. Also changed one of the return codes
in fused commands so that we could distinguish error
cases.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I86417ea4f5b8f3e6496162be3d6c6128076e35d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481666
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A new API was added `spdk_bdev_io_get_aux_buf` allowing the caller to request
an auxiliary buffer for its own private use. The API is used in the same manner that
`spdk_bdev_io_get_buf` is used and the length of the buffer is always the same as the
bdev_io primary buffer. 'spdk_bdev_io_put_aux_buf' is called to free the
auxiliary buffer.
The initial use case is crypto, in the next patch in series it is used. No UT were
added as the logic isn't that complicated and it is fully tested with each run
of crypto.
Fixed a comment typo also (not mine for once).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1939fcbc8e5db36fd909ef26771a725a551e8e6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478383
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow for some reuse in future patches adding
support to get auxiliary buffers from the bdev memory
pools.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icd4e71d0e918cfe940c749e40cd1cc6c560e25a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482022
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be helpful in future patches where auxiliary
buffer support is added, and we have a different
type of callback to invoke.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81d2cf3057e706a0e68de87a20b24c194205bbd5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482021
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To clarify what seems like it might be unintentional.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id14b49e8b7bc2372ecb8dd7579e6797a395c2cf2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477363
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Compare and write fused operation num_blocks should
not exceed value of 'atomic compare and write unit'.
In case of NVMe native support we should read this
value from 'namespace atomic compare and write unit'
if set in namespace identify data, otherwise from
'atomic and write unit' field in controller identify
data. If bdev does not support this natively we should
set this value to 1.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib1ea02dbf9d1eed476d9dd0114ea96b1376e0c45
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477911
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new field in bdev_io structure for tracking
number of IO retries. It will be used in future patches.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8e002e93f54c9ce39c7af0dd3a1960e6aea93580
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will only support a vectored variant of
compare-and-write for now.
This does no locking for now. Ii will be added
in a separate patch.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5bd075c912de60090e19cf8fced19c4879fcc900
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475941
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can't allow overlapped locked ranges - otherwise
two different channels could be deadlocked.
So add a pending_locked_ranges to the bdev. When we
start a lock operation, check if the new range overlaps
one that's already locked. If so, put it on the pending
list. When an unlock operation completes, we will
check if any pending ranges can now be locked.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2e3113216a195887b954533495ff200df14fadc1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Keep a mutex protected list of the active locked ranges
in the bdev itself. This is only accessed when a new
channel is created, so that it can be populated with
the currently locked ranges.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id68311b46ad4983b6bc9b0e1a8664d121a7e9f8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477871
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add an io_locked TAILQ to each channel, which hold
IO that will write to a currently locked region.
Also add a new step to the locking process per channel.
Each channel needs to wait until all existing outstanding
writes to the newly locked range have been completed.
Only the channel that locked an LBA range may submit
write I/O to it. It must use the same cb_arg for the
write I/O as the cb_arg used when locking the LBA range.
This ensures that only the specific I/O operations needing
the lock will bypass the lock.
When a range is unlocked, we will just blindly try to
resubmit all IO in the io_locked tailq. This could be
made more efficient in the future, but we don't expect
this path to occur very often, so going for simplicity
in the first pass.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibdc992144dfaffe7c05471a5b3c020cedd8cdfc3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478226
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This adds new internal APIs bdev_lock_lba_range and
bdev_unlock_lba_range. To start, these APIs will
manage dissemination of lock/unlock requests to all
existing channels for a given bdev. This does not
yet interact at all with any I/O sent to the channel.
Future patches will check new I/O to see if they
are trying to write to a range that is locked. Future
patches will also ensure we do not have overlapping
ranges active at once.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d5b1cc84b41a7adc2a3c5791c766bb77376581f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be used by upcoming patches for implementing
LBA range locks.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa4ad8dcc0d09ccf20d35f010fcae19dcc17abc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
In the case of bdev initialization, the memory could
not be allocated. When cleaning up, it needs to check
whether the memory pointer is valid or not before
touching the address of the pointer.
This is to fix below issue:
https://github.com/spdk/spdk/issues/1126
Change-Id: Iec0e2c5a40ad153a96fb939414a15ac3b9112a01
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478849
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <box.b.chen@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Media management event was introduced. It's sent out to notify that
some portion of the data needs to be rewritten (e.g. due to data
refresh, wear leveling, high error rate, etc.). This type of
notification is only utilized by devices exposing raw access to the
physical medium (e.g. Open Channel SSDs).
Change-Id: Ia30faa5866d71fd597009b441f69c609de974161
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Create a local variable for the spdk_bdev_channel
pointer. This will be used again later in this patch
series.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71bef863c422e60294b5249bf65f62d4939d1a53
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477870
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add an API so that the user can enable/disable the bdev IO
timeout. Also, add the bdev io timeout handling callback.
So it means to let the upper user determine how to handle
the IO timeout scenario reset the device or abort the IO.
Change-Id: I9c7138ca46c74c045b687adab59a18d6bccc4996
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469228
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, when additional resets were submitted while a reset was in
progress, those resets were queued and then executed serially as part of
executing the original reset. Doing multiple resets on a bdev in quick
succession is not useful if the first reset succeeds and is very
unlikely to be useful in the negative case. Instead, we should batch
resets and complete them all at once when the current reset succeeds or
fails.
Change-Id: If10e0f37526860eaeeb41a8803d6298a3eff3212
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474599
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Add the tsc trace for the parent bdev_io.
Change-Id: Idf5c5df3953fa1697c384a4f83b591584dd30a80
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476588
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The reset cmd and parent of splited IO would not go into
the _bdev_io_submit() so they don't record the submitted
time. The timeout IO check needs the submitted time so we
add them in this patch.
Change-Id: Ic7217171ec878d4a6dfa80d6635957ca0186928b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a link to the bdev channel for linking all the bdev
IOs that were submitted to this channel so that we can
monitor each IO's consuming-time.
Change-Id: I1e425b2059f20fd7b158eb3d6b023ce8629e7a30
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The _ was supposed to indicate an internal function,
but really leaving off the spdk in the function
is the standard way to denote an internal function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I74facafb67b793502838b9c1b5f90aec2c88c69b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475033
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
We try to reserve the spdk_ prefix for functions that
are part of the public SPDK API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0a95ba0f9db04b588a2e948427f8a9f53a7b5740
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This function is not part of the SPDK public API, so
remove the spdk_ prefix from it to make it more clear
this is internal to the SPDK bdev library.
Also add "channel" to the name since this function is
operating on the channel parameter.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I57897ab4bf601b90551259b7cf6efa63152ed02f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475031
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This is not part of the public SPDK API, so remove
the spdk_ prefix to make it clear this is internal
to the bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibda76e4d8e34dde0c2fe638cb965e5ba2d9e47b5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This function is not part of the SPDK public API, so
remove the spdk_ prefix to make that more clear when
reading the code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ea4c04c474a6cf0862f11921daa97c9df728e96
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
In emulated zero copy mode on devices with separate metadata support
the start zero copy request could assert after read completion,
during _bdev_io_unset_bounce_buf; the original iovs would be NULL, but
original md_buf would have garbage data.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia52b012c1b7462ebe490c29f5493168775646848
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473455
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This change allows setting of the NVMe completion queue
CDW0 in spdk_bdev_io_complete_nvme_status.
Before that change, handling of vendor specific NVMe IO
commands was limited since there wasn't a way to return
command specific info back to the initiator.
Change-Id: I250d5df3bd1e62ddb89a011503d42bd4c8390f9b
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470678
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When splitting bdev's, if we run out of child IOVs, we have to
make sure that we end block aligned. That may require us to
shorten or eliminate one or more child IOVs to be picked up
on the next split. If we eliminate enough such that there
are no IOVs for this split IO, just continue and the next
split completion will kick off another split to pick up
the remaining data to be transferred.
Fixes issue #981
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If2bfbe5f0862295e1d74cbea00692890a2178967
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
When we ran out of child_iov space, ensure the iovs to be aligned
with block size. However the calculation was wrong.
(to_next_boundary_bytes % blocklen) meant not to_last_block but to_next_block.
So calculate to_last_block_size by reducing to_last_block_size from blocklen.
The data was collected when the issue occured. So add unit test
by using the data.
Fixes#979
Reported-by: Geoffrey McRae <geoff@hostfission.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62a50bada450288ea7c60aec0e557c2a53cd8916
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470806
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds reference counter and gurading mutex to bdev_desc
structure to keep track of in-flight messages and avoid release of
descriptor until all of messages has been processed. With reference
counter existing remove_scheduled field in descriptor structure is not
needed anymore.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I97f78955362b04131abf202ba04e6d60343f3faf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some internal bdev.c static function will be shared
with new zoned bdev module.
Change-Id: Ifbb8bf443f67b2daf97858b15d474ecce98a9efb
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469100
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
This patch is entry point for extending bdev
interface to support devices with zoned namespace
semantics.
spdk_bdev_is_zoned() will allow user to check if
bdev is zoned bdev.
Change-Id: Id9ea9898d406d1d942bf3081b00ebcb574ac2b5e
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Added write_unit_size field to bdev structure.
It describes required number of logical blocks
for write operation. For legacy bdevs this value
will be equal to logical block size.
For bdevs working on top of Open Channel/Zoned
Namespace SSDs or RAID 5 volumes write size unit
could be greater than logical block size and
upper layer should perform write operations
with size of multiple of write unit size.
Change-Id: I55eb6687912a7d0d1157874b2778e7d6c2d44e37
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch adds new interface for opening bdev and
implements new style remove event. With that changes
user can be notified about different types of events
that occur in regards to bdev. spdk_bdev_open_ext
function uses bdev name as an argument instead of bdev
structure to remove race condition where user gets
the bdev structure and bdev is removed after getting
that structure and before open function is called.
spdk_bdev_open is now deprecated.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I44ebeb988bc6a2f441fc6a0c38a30668aad999ad
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Every exit path in spdk_bdev_set_qos_rate_limits() should
go through _spdk_bdev_set_qos_limit_done() as soon as
ctx is allocated and qos_mod_in_progress set to true.
This patch fixes one path were it did not occur.
With this change qos_mod_in_progress is set to false,
when failure in allocating qos parameters occurs.
Change-Id: I04a45dfdcde9160fd2701b44f5fde26fb0245177
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a part of a change that will introduce
new spdk_bdev_open_ext function. This will make
possible to pass callback function while opening
bdev which will be called when some bdev events
occur.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3e552edd5c90dacd39885e75e9114e48dddf50ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Ran into this while putting the compress tests in CI, an error
message will print following the completion of the app, checked
with Jim and it is actually not an error when lvols are involved
so change to warn now as this will show up in everyone's build
log for bdev testing.
Change-Id: Ib509b89acf5b6bfbeb349692ab59bbea4964557f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If subsystem bdev module initialize failed, it will call
spdk_bdev_init_complete(-1) -> (subsystem bdev)->fini
_spdk_bdev_finish_unregister_bdevs_iter -> spdk_bdev_module_finish_iter
In abovt path, spdk_bdev_module_finish_iter will repeate to call
bdev_module->module_fini function. Some bdevs will call spdk_io_device_unregister
which never call spdk_io_device_register. It will coredump when assert false in
spdk_io_device_unregister dev is null.
To fix this, let's check whether g_bdev_mgr.module_init_complete is equals true
and then call the bdev_module->module_fini.
Change-Id: Ia9a13318720d954e40eb2d666574bcb86e5f49e3
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462382
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that vhost closes bdev descriptors on the same thread
that opened them, we can reintroduce thread asserts into
the bdev layer.
This reverts commit 283abcb9a2.
Change-Id: I1acc455df0674b808ecf2fa58dffd183db6cf3c2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459168
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case some module has `async_init = true` and
some other module that comes after it fails to initialize,
then callback from asynchronously initialized module
may call `spdk_bdev_init_complete()` first, then failed module
will call `spdk_bdev_init_complete()` later.
This currently results in NULL dereference because
first call to `spdk_bdev_init_complete()` sets `g_init_cb_fn = NULL`.
This change prevents first call to `spdk_bdev_init_complete()`
by saying that failed module is not finished with initialization.
This patch fixes#847
Change-Id: Ib6b231d5ea27896ad88d7f11b8732921077b3d4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In future patch in new spdk_bdev_open_ext function we will call
spdk_bdev_get_by_name function and after that call and before
calling old spdk_bdev_open routine bdev can be removed.
We need to add mutex which will prevent that. Any future code
should use this mutex when accessing the bdevs list to get
a bdev and perform some operation on it.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I785a1791346aebdd394fc51ad0e7fbfbabf317c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It looks like currently we only check bdev names for NULL, but
not for "empty" string.
For example this rpc command:
sudo scripts/rpc.py construct_aio_bdev aio_disk "" 512
Will result in construction of AIO bdev with empty name:
sudo scripts/rpc.py get_bdevs
[...]
"name": "",
"aliases": [],
[...]
Change-Id: I41204096c8cf210a4dc40a8225d1c9dad353f533
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
For devices that don't have a UUID, the UUID is generated at
registration time. That means that some devices will not have the same
UUID from run to run, but this seems no worse than having no UUID at
all.
Change-Id: Icf6b8517ffcffabafa2b73176dc03d896d0017fe
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In file included from bdev_ut.c:43:
/root/yidong/spdk/lib/bdev/bdev.c:4373:9: warning: Access to field 'bdev'
results in a dereference of a null pointer (loaded from variable 'desc')
return desc->bdev;
^~~~~~~~~~
This is related to issue #822.
Change-Id: I8cd2bafadeff9846169bc9ca67b3c4110e9c0da8
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we run out of bdev_io's child iovs and we had
to round down I/O size to nearest block size boundary,
we used to decrease the existing child_iovcnt and
set a new "child_iov_run_out" flag to terminate the
uppermost splitting loop.
We can get rid of that new flag by just not decreasing
child_iovcnt when rewinding the last few iovs - it
will make the uppermost loop naturally terminate using
the existing checks.
Change-Id: Ie40c7ce135e7fb8fe284afdf7beeebd10af85cb7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459911
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Here is the an example to describe existing issue:
There is a Write request with 64KiB data length, and this IO is cross the IO
boundary. We assume that the parent IO will have 2 children requests, one is
33KiB length, the other one is 31KiB. Here is the view of parent iovs, the
first 33KiB length data has 33 iovs:
iov.[0].iov_length = 1024;
.
.
iov.[31].iov_length = 256;
iov.[32].iov_length = 768;
.
.
iov.[64].iov_length = 1024;
In function _spdk_bdev_io_split(), then you can see that for the 33KiB length
child request, exiting code will run out of child child_iov space and return
error due to last one data buffer is not block size aligned.
Here we can rewind the existing offset to last block size aligned buffer to
avoid the error case, for backend which need aligned data buffer such as
AIO backend, the request will go through spdk_bdev_io_get_buf() again to
do the data copy, otherwise for those backend devices such as NVMe with
hardware SGL support, 256 data segment is fine for them.
Change-Id: I96ebdf29829d86f9b38fab28a7406eedc9fa44ef
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There is one existing example usage case to describe the issue:
Users(e.g. Vhost-blk target with Windows Guest) call spdk_bdev_readv_blocks()
to submit a 128KiB length data READ request, and the data buffer
provides by vhost isn't aligned, but the backend block device
requires aligned data buffer, so existing function call trace:
spdk_bdev_readv_blocks()-->
spdk_bdev_io_submit()-->
spdk_bdev_io_get_buf()
spdk_bdev_io_get_buf() will allocate buffer from large data
buffer pool for 128KiB length, of course, it will return error
with existing logic.
So here, no matter what the data length is, we can go through
the split process first for both READ and WRITE.
However, there is one scenario that for iSCSI READ request,
the iSCSI layer will not allocate data buffer for the request,
so for this case if the IO boundary is required we should keep
the logic as before.
Change-Id: I67661f5fa4c3c7c561b45c86146759aa3477adbf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function spdk_bdev_desc_get_bdev() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: I018f57b7b4bcfe22ec6a97cf5261b9a257ba93de
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
_spdk_bdev_io_split() will be used to requests that have IO buffers.
Change-Id: I5ba0b83e47b84066e6c5032de2e02404155896d3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The function spdk_bdev_io_get_io_channel() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ifa332ce3a489256ccf2f5d0dd9c74a3215c544ce
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function spdk_bdev_io_get_thread() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ia25abf57eb88c8df47c83e4edd761a9e02cc1618
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds *_with_md family of functions allowing for IO with
metadata being transferred in a separate buffer.
Change-Id: I842d5a00a532cf5d0b0f0738535ea46903674140
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451465
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move actual submission code to _spdk_bdev_io_do_submit, used by
both normal submission path and QoS path.
Previous patch(review.gerrithub.io/c/442127) adds the missing
bdev_io->internal.in_submit_request flag to QoS submission path.
But QoS submission path doesn't handle nomem_io yet.
This patch makes QoS submission path handle nomem_io in the same way
as the normal path and extracts actual submission code into do_submit
function, so that further modification of the submission logic will
apply to both paths automatically.
Change-Id: I41fa88d239c3a2bd9783d812826e32e7c887818d
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When parent IO was splitted into several children requests, SPDK
may return parent completion callback with error status before
all the children requests are finished.
Change-Id: I63221a0ae1a5925a7fcd9744b4f5d8079c641252
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These two paths do the same thing, only spdk_bdev_io_get_buf tries to
allocate the buffer directly, while spdk_bdev_io_put_buf reuses the
returned buffer for one of the waiting requests.
Change-Id: I341a011f3a16a99de399c8b56fa73ccd9c7fe4fa
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously whenever bdev module went through init>fini>init,
the async modules would trigger assert in spdk_bdev_module_action_done().
This was because starting value for action_in_progress was being
set only once - during registration of the modules.
With this change, modules are set as async just before their init start.
Change-Id: If177a8dc97812b1b264cb61d5ad202ce47fca3b5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Mempools are based off of a ring structure which allocates its elements
as a power of two. It also only exposes n-1 elements to the user. So
when we create a mempool with 2^n elements in it, we have to allocate a
ring with 2^n+1 entries. By decreasing the number of elements in these
key mempools by 1, we can save a decent amount of memory.
Change-Id: I942c9dd4cf59096969bc2559fb46fd2084a07f09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For bdevs that don't support zero copy, emulate the
API using regular read and write operations.
Change-Id: Iabd7ff474bf740b096f38bd47196987cbd89e915
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a ZCOPY operation to obtain buffers that represent
data regions on the backing block device.
Change-Id: Ie941c16ee051d0009e3888b52b8f41773bba47b3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/386166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
set_bdev_qos_limit RPCs must come after the RPCs that
create its bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7008745f9c56d9bc579decc7fe3c4d0d58950754
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451414
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Idb18f7ef44634deaf63139f0f872881c9cdaefac
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This API had good intentions, but as more complicated
use cases came up where base bdevs could come and go,
we've realized that the bdev layer will need another
mechanism to query bdev modules on these types of
relationships between a virtual bdev and its base
bdevs. We removed all code related to tracking
the array of base bdevs a long time ago.
Change all existing callers to use spdk_bdev_register.
Document spdk_vbdev_register as deprecated for now,
and change its implementation to just call
spdk_bdev_register for simplicity sake.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b40ed96480c0fa7184db42953a9f4e4c167fed1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When bdev is registered it will send "bdev_register" notification and
"bdev_unregister" when unregister is complete.
Change-Id: I3b37a4cb766a473f3da63a571036add366e78fa5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As the bdev_io maybe NULL, so put the assignment after assert(bdev_io != NULL).
Change-Id: I58d6fcf97931b2f431ad5680b87b098e0c9a5e9b
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449296
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Currently if module claims a bdev in examine_config,
it cannot start asynchronously. This patch changes this
behaviour by calling examine_disk on modules which previously
claimed bdev trough examine_config.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I85b603590c6dab50e59ef7e68f292cb9abc47d98
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448132
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Increase the size of small and large buffers in the bdev layer
to store DIF. Increase is the amount necessary to store 16 byte
metadata to the block formatted with 512 + 16. 512 + 16 is the
current maximum ratio of metadata per block.
This change will be done in the iSCSI library in the next patch
and other libraries may be done later.
Hence add and use an new macro SPDK_BDEV_BUF_SIZE_WITH_MD(x) for
convenience.
Change-Id: I4b5498f56c9baf3e3ed93dd1c757998d7ce65141
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unregister calls are not guarded. Fix this by chekcing status before
doing unregister.
Change-Id: I593e27efdae17f6d89362fd8e4edccf2af2b7281
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445894
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
