Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e19266d5d418e1b356308d2b9efa419c1b22232
Reviewed-on: https://review.gerrithub.io/392002
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
the sysfs for NVMe drives on some older versions of the linux kernel
differs slightly from the latest kernel versions. This patch adds a
fallback to support those older kernel versions.
Change-Id: I2787e0d15d310ce1f264b0a303f53e48525a9a1d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/391983
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I964b7a37fcb641a610d518a02841b25913c5be2e
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391733
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If occasionally there is unflushed data in kernel,
nbd disconnect ioctl will not return, until these
data are flushed. spdk_nbd_disk should process these
data in flushing.
But at present, spdk_nbd_disk is running on a some
reactor with rpc. It is a hidden danger of deadlock.
Change-Id: I2850105dff78f09f0e1b3c0a570dbbf7efdb469e
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The outstanding r/w requests counter is not decremented
back if IB r/w request fails.
As the result, the rdma qpair stops pumping the requests
after the number of ibv_post_send failures reaches
the threshold for outstanding r/w requests for that qpair.
The patch decrements qpair's r/w counter back in case of
ibv_post_send returns an error.
Change-Id: I8fa0f2905974a50037034962e4d2a001290a06a9
Signed-off-by: Philipp Skadorov <philipp.skadorov@wdc.com>
Reviewed-on: https://review.gerrithub.io/391799
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This greatly increases the efficiency when the target is scaled
to many connections. Now all connections being handled by a given
thread can be polled in O(1), whereas before it was O(n) where
n was the number of connections.
Change-Id: I9f695f68093d73e6538df416b0f1aabef07119ff
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391491
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The "Core" parameter in the configuration file has been removed. New
connections are handed out to available cores using round-robin.
Change-Id: I24527fa22a0b2738ebbf5fb030e3bb373ead5da2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/388295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libiscsi will be used to test our iscsi target for spec compliance. I
check out the source from github incase we need to modify it and create
our own branch later.
Change-Id: I2d1c037e1aee47fa7f6f700ae186dd402f9ad52b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/391887
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I4b9f172102c6d7998d3a634573493db3fe25ff76
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391686
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
The cause of strdup failure is only out-of-memory for malloc().
Hence errno is omitted.
Change-Id: I682f11fbb6f12c9de8d57a025b704b4f050f7474
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391685
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch does the following things:
1 Set the time period 1 second into a global variable,
then if we modify that value, we will make sure that
we change it in the whole file.
2 Fix the period performance printing data . We should not pass
the time period, but we should pass time period * times, since
I/Os completed are caculated from the beginning.
Change-Id: I1eaaf1655389cbccefdcc879a51fca94028afdcb
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/391421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The struct is about to be removed.
This is a preliminary patch towards
the removal.
Change-Id: I5a479678790b8758634bdb0bb2e6facfde514aa1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391945
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The old API is simply not sufficient.
We assumed that each request contains
a single request and a single response
descriptor. However that's not the case
for e.g. virtio scsi eventq, where each
event contains only a response.
This patch only introduces the new API,
keeping the old one intact. The old API
will be removed in subsequent patches.
Change-Id: I89e53d602165aa0c7ceb25d98237f87550f4eae7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/390854
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I088f62e6035aa1885ad0973a033ecee2f325ed30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391684
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) move iscsi_pmem to nightly
2) move idle_migration to nightly
3) reduce number of malloc bdevs and lvols for iscsi_lvol
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63fa5a2634c6edb08db16267972fd21c20fd84f4
Reviewed-on: https://review.gerrithub.io/391976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I138362d4ebe157926228384ab032c057c03c822e
Reviewed-on: https://review.gerrithub.io/391891
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
All SPDK libraries should use the spdk/log.h family of functions
for logging.
Change-Id: I4c12388433f8c57291cea9f30566438a9d78e3d1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391683
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Ignore them in order to be able to
keep linux headers 1:1.
Change-Id: I49a26012a5f0acdd10351eacdf8cb052c44a4044
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/388194
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: I619f2e772b38061e26e3c5f2b4014ee73a5f5d81
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/391894
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This prepares for some future changes to blobstore
metadata. For older (pre v3) blobstore disks, we
do not want to try to write new metadata fields,
since in many/most cases, there will not be room
allocated for them.
The current code will keep the existing version -
this is just adding tests to make sure this does not
break in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I866ff39972eb15b5a24fd30fa6b56d649fc06305
Reviewed-on: https://review.gerrithub.io/391507
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
I have no idea why - but scan-build starts complaining about
some missing SPDK_CU_ASSERT_FATAL checks when analyzing the
next patch - even though that patch has nothing whatsoever
to do with the scan-build error reports.
scan-build is really weird sometimes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d426384fa4f846abf2eb98fd29ee308d08c1943
Reviewed-on: https://review.gerrithub.io/391875
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This ensures we do not end up with a racing close v.
delete. If we decrement the ref up front, we could
start the close process (which may include persisting
metadata) and then also allow a delete operation to
start. It is safer to wait until the close operation
is done before decrementing the ref count, because then
it will eliminate this race condition (the delete op
would immediately fail).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad7fd8320d2c9b56f3c4fce054bcb6271e19ad38
Reviewed-on: https://review.gerrithub.io/391493
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures all blob-loading functionality goes through
the single spdk_bs_open_blob function which will simplify
some upcoming changes around managing global metadata
state from multiple threads.
This will also help prevent races where a delete operation
has started followed by an open on the blob that is
being deleted. Those specific changes will be in an
upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I17e995145ab23068b816b44c33483b0708f5f563
Reviewed-on: https://review.gerrithub.io/391486
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Found during unit testing for blobid_mask coming in a future
patch - the unit test will be added as part of that future
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iecdde6ba16c5af9caf59214f328ddc22aae71e94
Reviewed-on: https://review.gerrithub.io/391692
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Similar to previous change, the ** paradigm is a bit
problematic for asynchronous routines that could fail.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife7748280482356c4c51a796817b71cd7bc7e479
Reviewed-on: https://review.gerrithub.io/391483
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Using the ** paradigm is a bit problematic for asynchronous
routines that could fail. Currently we were inconsistent in
that some error paths would zero the pointer while others
did not. So make this just a plain pointer, which simplifies
the API and its implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67147931c6e8350896a4505022a6a314655de3d3
Reviewed-on: https://review.gerrithub.io/391482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We do not need to separately call _spdk_blob_lookup() in
_spdk_bs_iter_cpl() - spdk_bs_open_blob() does this
already. This minimizes the number of entry points to
_spdk_blob_lookup() which will be important with some
upcoming changes around multiple threads performing
metadata operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I032cd55c862267298cbe1674dd13d7a83eef7c0f
Reviewed-on: https://review.gerrithub.io/391474
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add pointer of subsystem in namespace data structure, then we can remove
the spdk_nvmf_subsystem_add_ns_ctx.
Change-Id: I2d024f10d35fdac64fc34d0cb6523cfca74a8164
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/391697
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add the unit tests for the spdk_nvme_connect() API. This API
will be called both by the primary or standalone process and
secondary process. Introduce different unit tests to cover
different usage.
Change-Id: I9ded7d08b593c5e2c541cf6faad6aff0ff2ebff9
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380895
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
ext4test takes ~80 seconds to run, which is a significant portion of the
overall test time for machines running the iSCSI tests.
Change-Id: Id6384fe023f101d4e81bc4ed2da9a53a817d2a02
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391317
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I127279ba32388bcedb85ed0a2eba9b5345c02eda
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/366532
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85d33f5223ebb30fcf0135596537142e48f2879f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/391539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While iterating, allow the user to perform asynchronous
operations. To continue iteration, the user is expected
to call spdk_for_each_channel_continue.
Change-Id: Ifd7d03d5fbf17cf13843704274b036d49ca0484a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/391309
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
With the previous 2 seconds sleep we
still used to randomly fail from time
to time.
Change-Id: I99f8c50ba4af87c47bed5a629ddb79f5eb796d4c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test ran for 10 minutes, which is half of the allotted time for
the entire nightly test run.
Additionally, we should be testing each bdev backend at the component
level (e.g. via bdevio and bdevperf), rather than trying to add tests
for the whole matrix of front-end app (iscsi_tgt, nvmf_tgt, etc.) with
each bdev backend.
Change-Id: I10311e3e5092084dc939ab8662e8312066ecab6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391303
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49fa42e85f9239869d640b248330529ba8c2243a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391047
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When header files include other header files, it can be difficult
to read the chain of relationships. Hence remove obvious nested
header inclusion.
Remove obvious unreferenced header inclusion too.
Change-Id: I13b1c4e107da8c1a93fae4a0e3c3ee273887aab0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391363
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK does not provide casual way to get iSCSI global parameters
set by iSCSI.conf. Hence test/iscsi_tgt have to use hard-coded
value for iSCSI target's nodebase.
NVMeOF provide similar JSON-RPC dump_nvmf_subsystem().
Change-Id: I1a53572f707e83cfd18369475b2565c6390a4d2d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391323
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
get_vhost_controllers was printing only one device of vhost
scsi controller with multiple devices
Change-Id: I392fc393d9e8f3d20c28139724d83b79d800456a
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/391593
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Older astyle releases called this option "add-brackets" ("add-braces"
was added in astyle 3.0), so for compatibility with both, use the short
option name (-j), which is the same in both.
Change-Id: If6ee3065281219d84549f93588079bf0f1f947a2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also used it in parsing `-m` SPDK app param,
meaning that it can now accept numbers
followed by a binary prefix - like 512M or 2G.
Change-Id: If458dc08429237f2cb3f3f661bcaf382468df0f0
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/391670
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the metadata channel, and instead use the same
channel for metadata and data operations on the metadata
thread.
This prepares for future changes which will allow
for metadata operations on any thread - not just the
thread where spdk_bs_load() or spdk_bs_init() was
called.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b11a58fcb237a9a7603841d118b3729d83c6c98
Reviewed-on: https://review.gerrithub.io/391311
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
As part of clarifying the API and preparing for some
future changes, rename the following functions:
spdk_bs_md_create_blob => spdk_bs_create_blob
spdk_bs_md_open_blob => spdk_bs_open_blob
spdk_bs_md_delete_blob => spdk_bs_delete_blob
spdk_bs_md_iter_first => spdk_bs_iter_first
spdk_bs_md_iter_next => spdk_bs_iter_next
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I86bf792717b68379484a6108396bb891fe1c221e
Reviewed-on: https://review.gerrithub.io/391031
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This function was a nop and is not needed.
lvol was calling this function when an lvol bdev
gets a FLUSH I/O, but that is not needed either. So
lvol will now report it does not support flush.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I92df83243f7ebce81c69040a8874891dc2ffc961
Reviewed-on: https://review.gerrithub.io/391023
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
There is a case in high queue depth situation and the IO may be
failed due to no memory. Our perf tool did not recognize this
and always count the IO in the inflight IOs. Thus in the completion,
it waits more than actual IOs to return and the Perf is hanging.
Change-Id: Ie5472e260c75c5abd80c06eb6c613dc7d1761c78
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/391582
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
