Update scripts with Fedora 35 and remove older
versions which we no longer use.
Change-Id: I54d9f3bcf76065f3e4e3094411d77153c351afc9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This also translates into switching fully to upstream QEMU for the
vagrant setup.
This is done in order to move away from OCSSD and SPDK's qemu fork
and align with what upstream QEMU supports. Main changes touch the
way how nvme namespaces are configured. With >= 5.2.0 it's possible
now to configure multiple namespace under single nvme device. Each
namespace requires a separate disk image to work with. This:
-b foo.img,nvme,1...
-b foo.img
-b foo.img,,..
Will still configure nvme controller with a single namespace attached
to foo.img.
This:
-b foo.img,,foo-ns1.img:foo-ns2.img
Will configure nvme controller with three namespaces.
Configuring nvme controller with no namespaces is possible via:
-b none ...
Note that this still allows to define other options specific to nvme
controller, like CMB and PMR. E.g:
-b none,nvme,,true
This will create nvme controller with no namespaces but with CMB
enabled.
It's possible now to also request for given controller to be zoned.
Currently if requsted, all namespaces under the target controller
will be zoned with no limit set as to max open|active zones.
All nvme devices have block size fixed to 4KB to imititate behavior
of the SPDK's qemu fork.
Compatibility with spdk-5.0.0 fork is preserved in context of setting
up namespaces so this:
-b foo.img,nvme,2
is valid as long as the emulator is set to that of spdk-5.0.0's.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib5d53cb5c330c1f84b57e0bf877ea0e2d0312ddd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From the CI perspective, this allows for proper binding of given
VM builds to specific tasks (e.g. use this image for LTS, this
one for release, etc.) since by default vagrant always uses the
"latest" version of given box.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0cbd2a47e7dbdcbe83d18e3fc3100fd2a2400983
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10132
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1b437ee8f63e7cc15e60f611fe0c814542c73ece
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10131
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ifdd1d02b466b6496469c9ea1f09633b6e368ab57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9617
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
also remove out of support fedora31
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: I2ec224a3fb3849eb62ba46a01aa74c62926174f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As of latest qemu (>= 6.0.0) these can now be used together as
different BARs are used to accommodate for both.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icf32f491fd33ef733f0d946f9b5caaeb87137d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Having pmr_cmdline set to nil was for some reason breaking cmb setup
as weirdly enough pmr_cmdline was ending up being set to "true".
Avoid this by having pmr_cmdline set to some value, empty string in
this case.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ib41da699dcc2f213f0b18d21be3fd32f398bae41
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The openstack tests require to have one interface available under
specific ip, 10.0.2.15. This ip is a first lease VM receives from
the user network which is preconfigured in libvirt environment.
Use this instead of defining completely separate network which
by the very default will serve its own DHCP service as well. This
may result in a cosmetic issues (e.g. two ips, static one and
dynamic one on the interface) of having inconsistent config on the
VM depending on how the net device is configured by the underlying
distribution.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie3da26eebcfb0de668166c4a0120c65aec104540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Available in qemu >= 5.1.0. Note that since CMB and PMR share the same
BAR they cannot be used together. If both are specified, PMR setup is
skipped.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia0c6681b5ac7563efc6c32d2fff1808814196676
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to minimize vagrant work on the CI side. Users
may still provision given VM with full configuration includin these
pieces by running create_vbox.sh with -d argument.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7f494958e06d4e3b047938dda0bd102da824d235
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
vagrant's shell provisioner uploads files to /tmp, however,
vm_setup.sh must be run from the repo to find all the source
files. This requires the repo by synced over to the VM as well.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iaf16f066af10739589aa584f57c2b89f5c5202e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
There's almost no benefit coming from it CI-wise since all our VMs are
already fully provisioned. The speed up of nightly jobs, which do run
package updates, is minimal. Overall, it only slowers deployment of the
autotest VMs.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I68d9530533f0b0d7d2fb72ce82706d6bc0cf2e6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There should be no Qemu param "namespace" added for
emulated nvme drive (i.e. default should be used).
This condition was faulty because ENV variable storing
this information is a text and we check for != 1 as for
and integer.
Change-Id: Ic87aadbbc7eb1ba1ec700bccdb8864726a6562e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4159
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Mellanox Build Bot
Previous check was always returning true forcing vagrant to add
additional net device to each VM with the same local ip address.
This interface is not needed by vagrant for communicating with
most of the VMs so make sure it's added for the openstack tests
only.
Change-Id: I64092d5c113d3b5f4575f83db640bf5dd40d4bf8
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4542
Reviewed-by: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The main purpose of this is to force vagrant into using its own
ssh keys when password authentication is requested. Normally,
when ssh.password is defined, vagrant will attempt to inject its
own ssh key, by using provided password first, and re-use the key
for the new ssh session to provision the VM.
However, some vagrant boxes may come with their own embedded
Vagrantfiles which define custom ssh keys. If password auth is
requested for such boxes, vagrant will not use its own key, nor
the ones that may be defined by the vagrant box. Instead, it will
fallback to interactive, password authentication. From the CI pool
perspective this is not desirable.
On other note, this ties to the ongoing work of building indepdent
images for the CI where vagrant boxes will be deployed with a
custom ssh key alredy provided inside the box.
Related work:
trello.com/c/gAfo9mH1/208-vagrant-improvements-box-packaging
trello.com/c/9Dxp2Y9c/248-packaging-centos78-and-freebsd1112-with-packer
Change-Id: I49035b426519d9b24bcdab573d335ee622130560
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
- reorganize the code to cleanup main loop
- other small syntax improvements
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I0a2b9ac9e78db2f96ed49d3e7e4d938425c76fa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3720
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
- rename to get_box_type
- use hash to map distro to box type
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I5608b04d813ad1b37ae4dbbc418217a61bd96a52
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3480
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
By default, vagrant executes rsync with --copy-links argument which
instead of copying the actual symlink is actually copying the file
given link points to. Since symlinks are part of the spdk repo,
they need to be synced "as is" - when symlinks are replaced with
actual regular files, git will report that as a typechange, messing
up status checks that our tests perform.
Change-Id: I72814547c3e876ab2adbc779159ca991f18cbe86
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
The original image was prepared using SCSI bus.
Using IDE explicitly speeds up boot process as the
system does not have to look where to boot from.
Change-Id: Ia9f649d1c46c591135833c02ed60b3c960ad8b98
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2840
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reverts commit 436b9be9d0.
Reason:
these change makes Vagrantfile rely on env variables (eg. spdk_dir),
which are only set when running scripts/vagrant/create_vbox.sh script.
After create_vbox.sh has finished env variables are not accessible,
but still needed to work with Vagrantfile using Vagrant commands
like 'vagrant ssh' or 'vagrant reload', etc. This results in
configuration errors from Vagrant and scripts being unusable.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I135c42d248c13dfa93c2210dabce49df8116e8f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3055
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Allow to specify additional argument which will tell Vagrant to enable
CMB on given nvme drive. The format of the argument is any string which
is then simply converted to plain "true". E.g.
./create_vbox.sh -b "/path_to_nvme_img,nvme,3,true"
Change-Id: I7de55e46491318b082bf4e2165260091b44d60f0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Clearlinux after installation has no empty environment variables,
which caused test failtures.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8e0673a22c1fe3cf93232704bf8950be357a21b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2717
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Disable default synced folder. We have our own set of
directories to synchronize so this is not needed.
Change-Id: Ie52e38af94fc2c403e3d3f095071833b9df09c9c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1158
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I66c1c965d9de8b4e9625c1f1850cbb28d11138ad
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
In order to have all the boxes fully functional we
need to select the proper tool for synced folders.
FreeBSD boxes fail to set proxy properly via vagrant-
proxyconf plugin, so they fail to install rsync and sshfs
clients. NFS is pre-installed so we can use it.
Other boxes, like generic/fedora*, have issues using NFS
so we need to use sshfs/rsync instead.
Change-Id: Ic191b5a80dbd43479943c1739971abdff39baf41
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Sync "output" directory (containing all build results,
like doc, coverage, test completions, etc.)
from guest to host.
Change-Id: I9a57a72eb610aacde011fc39bb8d39c74486cef1
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some time ago I created a patch which unified all boxes
URLs to generic/* which come from a single author/company
and seemed to be quite universal.
Unfortunately some of the boxes are not that generic as
the name suggest, so I am reverting my change and will
use boxes from vaious sources.
Ubuntu 1804 - had heavy DNS issues due to hardcoded
addresses in resolved.conf. Very hard if not impossible
to fix if working with synced folders like we do.
Centos 7 and 8 - sshfs not available by default. Also
had some other minor quirks. Official boxes available
so let's use them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I514d3b92c6ac5844b1929fdadfd35d6079933247
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1622
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
