Using contructor/destructor to handle g_dpdk_sem will
help later in the series when splitting vhost fini
between vhost.c and virtio abstraction.
Otherwise multiple callbacks would be needed during vhost fini.
Ex. spdk_vhost_fini -> vhost_user_fini to stop the sessions ->
-> back to spdk_vhost_fini to remove vhost devices ->
-> vhost_user_fini to destroy the g_dpdk_sem
g_dpdk_sem will only be used from rte_vhost_user.c.
Until all references are moved, it is placed in vhost_internal.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0505b906621f0eb0cb1226f96a3b6cf49f66778f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11055
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
There is no need to zero out the g_vhost_core_mask on vhost_fini.
Removing it will help later in the series when splitting vhost fini
between vhost.c and virtio abstraction.
g_vhost_core_mask will only be used in vhost.c and any cpu_mask
shall be passed to virtio abstraction after going through
vhost_parse_core_mask. There is no need to make the
g_vhost_core_mask accessible for virtio transports.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic936c2a8dd1bb6f93b6f6209ea48e3278b19b54e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11054
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
In later patches rte_vhost functions will be moved
to rte_vhost_user.c. To prepare for this,
iterator is used in place of accessing g_vhost_devices.
While here, followed the same style of iterating in
spdk_vhost_config_json().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1b73c00dfe1391f359421d044686e49a8c6c9176
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11022
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
g_vhost_mutex scope is only within vhost.c as
it should. Meanwhile there is an internal vhost API to
use this lock from any of the vhost files.
Later patches in the series move some functions from
vhost.c to rte_vhost_user.c, where using only the
internal vhost API locks will be better suited.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5916d4dc824ec980fa510fd3cbbd0c8e082d6611
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11021
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Creation of sockets is specific to rte_vhost, so it
functionality responsible for setting path for them.
dev_dirname is renamed to g_vhost_user_dev_dirname
and its definition is moved to rte_vhost_user.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9bae67667b0f6624f2daf3244a048d10e94e553c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10631
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Changing the vsession coalescing setting is specific
to rte_vhost as such it should be moved the rte_vhost_user
that focues on rte_vhost specific functionality.
Renamed with vhost_user_* prefix to match the file.
Since the rte_vhost functions are still called directly from
vhost.c, temporarily they are added to vhost_internal.h.
Once implementing virtio transport abstraction is complete,
some will be removed and others will be replaced with
a generic callback structure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98b3746952cfe09fb724c49e4050efc0c42985a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10630
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
For some time already the DPDK rte_vhost interface was
accomodating for other types of devices than virtio-net.
rte_vhost_compat.c file contained the use of DPDK rte_vhost,
rather than workarounds. To make that clear it is now renamed
to rte_vhost_user.c.
This patch is first in series that reworks vhost library
with two goals in mind:
1) Refactor vhost and vhost-blk to no longer depend on rte_vhost.
All references to that API will be moved to rte_vhost_user.c.
2) Add a transport abstraction for virtio-blk devices.
vhost-blk will now be able to expose virtio-blk using multiple
implementations of the interface.
First one will be vhost_user that depends on DPDK rte_vhost library.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib6d4e4a6352069fa76e6b017ec203dab75f887b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11052
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
A somewhat hidden functionality was present in spdk_vhost_dev_find().
Caller could match a vhost controller by controller name (socket filename)
or by full path to the socket.
This function is used by vhost RPC too.
The functionality of matching by full path was not documented,
nor matches what is presented in spdk_vhost_dev_get_name()
or vhost_get_controllers RPC.
This patch removes this functionality as part of series
to enable non-vhost-user type controllers, which might
not use the path to sockets.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0e5ce75ac80ed8d1da962eabba86af69f59a43db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10436
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
If there is still some inflight IO which prevents
vhost_session_stop_done(), stop_poller can try
within 4 seconds, and then call vhost_session_stop_done
with -ETIMEDOUT.
This can avoid endless blocking in ctrl pthread if there
is no response from vhost session or its backend bdev.
Then spdk vhost target can still serve all other vhost
devices and operations besides the error one.
Change-Id: I2fc78b4da926c936a2e42dc0e66ce1c60001330d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10393
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK shouldn't use `free` to free the memory allocated by rte_zmalloc_socket.
Otherwises, the vhost-blk/scsi will continuously crash.
In this patch, SPDK don't free the dpdk allocated memory,
DPDK will free it finally. Add a flag to indice the resubmit handle.
Change-Id: I85fd84b7d27a091830006a0f84d541c48290cbb3
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10383
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
DPDK vhost will call `new_device` when the VRINGs are
queue paired(virtio-net) or all the VRINGs are started.
However, for virtio-blk/scsi, SeaBIOS will only use one
VRING queue, DPDK added a workaround patch to add
`pre_msg_handle` and `post_msg_handle` callbacks to let
devices other than virtio-net to process such scenarios.
In SPDK, we will start the device when there is one valid
VRING, so there is a case that SPDK and DPDK have different
state for one device. For a virtio-scsi device, SeaBIOS will
only start the request queue, and in the BIOS stage, SPDK will
start the device but DPDK doesn't think so. If users killed
SPDK vhost target at the moment, in `session_shutdown`, SPDK
will expect DPDK to call `destroy_device` to do the cleanup,
but DPDK won't do that as it thinks the device isn't started.
Here in `session_shutdown`, SPDK will do this first, it's OK
that DPDK will call another `destroy_device` for devices that
have the same state both in SPDK and DPDK.
Fix issue #2228.
Change-Id: Ib76dd54c8fa302ffe6da9b13498312b7d344bbfe
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10143
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
_stop_session() is called while holding the global vhost lock,
and in the caller we do release the vhost lock, so even for the
error return from device backend, we don't need to release it
in _stop_session().
Change-Id: I08fef64f900bb42ee68bf02b4c4f1406e903a8a6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10142
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`struct spdk_vhost_dev vdev` in `struct spdk_vhost_scsi_dev` can be
unregistered in `vhost_scsi_dev_remove`, so we can't use it
anymore in other places after `vhost_dev_unregister`.
Ideally `state->remove_cb` should not take the `vdev` as
the input parameter either, but I don't find it's used
anywhere, so leave it unchanged.
==29555==ERROR: AddressSanitizer: heap-use-after-free on address 0x602000006df0
READ of size 2 at 0x602000006df0 thread T0 (reactor_0)
#0 0x7f3c246c0f0a (/lib64/libasan.so.5+0x9cf0a)
#1 0x7f3c246c3c15 in vsnprintf (/lib64/libasan.so.5+0x9fc15)
#2 0xa55cfa in spdk_vlog /spdk/lib/log/log.c:158
#3 0xa5596f in spdk_log /spdk/lib/log/log.c:110
#4 0x842e43 in remove_scsi_tgt /spdk/lib/vhost/vhost_scsi.c:208
#5 0x851508 in vhost_scsi_dev_remove_tgt_cpl_cb /spdk/lib/vhost/vhost_scsi.c:1149
#6 0x8383f1 in foreach_session_finish_cb /spdk/lib/vhost/vhost.c:1144
#7 0x9d3223 in msg_queue_run_batch /spdk/lib/thread/thread.c:703
#8 0x9d73fe in thread_poll /spdk/lib/thread/thread.c:919
#9 0x9d7c3b in spdk_thread_poll /spdk/lib/thread/thread.c:979
#10 0x8812fe in _reactor_run /spdk/lib/event/reactor.c:920
#11 0x881bf1 in reactor_run /spdk/lib/event/reactor.c:958
#12 0x88292b in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#13 0x873ff9 in spdk_app_start /spdk/lib/event/app.c:585
#14 0x408044 in main /spdk/app/vhost/vhost.c:105
#15 0x7f3c23691f42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
#16 0x407add in _start (/spdk/build/bin/vhost+0x407add)
0x602000006df0 is located 0 bytes inside of 8-byte region [0x602000006df0,0x602000006df8)
freed by thread T0 (reactor_0) here:
#0 0x7f3c2473191f in __interceptor_free (/lib64/libasan.so.5+0x10d91f)
#1 0x8369f2 in vhost_dev_unregister /spdk/lib/vhost/vhost.c:1024
#2 0x84f32d in vhost_scsi_dev_remove /spdk/lib/vhost/vhost_scsi.c:913
#3 0x83cdb7 in spdk_vhost_dev_remove /spdk/lib/vhost/vhost.c:1494
#4 0x83ed66 in vhost_fini /spdk/lib/vhost/vhost.c:1644
#5 0x9d3223 in msg_queue_run_batch /spdk/lib/thread/thread.c:703
#6 0x9d73fe in thread_poll /spdk/lib/thread/thread.c:919
#7 0x9d7c3b in spdk_thread_poll /spdk/lib/thread/thread.c:979
#8 0x8812fe in _reactor_run /spdk/lib/event/reactor.c:920
#9 0x881bf1 in reactor_run /spdk/lib/event/reactor.c:958
#10 0x88292b in spdk_reactors_start /spdk/lib/event/reactor.c:1060
#11 0x873ff9 in spdk_app_start /spdk/lib/event/app.c:585
#12 0x408044 in main /spdk/app/vhost/vhost.c:105
#13 0x7f3c23691f42 in __libc_start_main (/lib64/libc.so.6+0x23f42)
Change-Id: I511c4316a838cd92961d57c9193d384acd49d760
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10141
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the same effort as lib/iscsi.
By using spdk_scsi_dev_get_first_lun() and spdk_scsi_dev_get_next_lun(),
remove the dependency on SPDK_SCSI_DEV_MAX_LUN from lib/vhost.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib79d2c3f8e7a5027d3d2c03f8f886c588b86009b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9611
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Interrupts were all being registered with the name "fn". Directly pass in the
name instead to fix this.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I38e59d784298a61ca2130090ede500101389685c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9346
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Rui Chang <rui.chang@arm.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When run spdk_top against vhost, the poller name is displayed as
"bvdev->bdev ? vdev_worker : no_bdev_vdev_worker" which should be "vdev_worker".
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ie97c69bd8cdd3fdafc5fe4dd80e1fde85a8e3238
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9130
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Block device product name is same among same type
of the block devices, while Guest VM may use this
value to generate UUID, so here we change it to
block device name instead.
Change-Id: I58c5fb271a6a436c15520616c2065eee9c37300a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In dpdk 19.11 version, RTE_VHOST_USER_ASYNC_COPY is not define.
After dpdk 20.08, we can use RTE_VHOST_USER_ASYNC_COPY.
Use version check to avoid this problem.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Iaf9914e8380f3d54cded1e2f16af6a7dc3504f95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_vhost_init() relies on having a thread on each reactor.
Every vhost controller could be created on the same core and
even passing --cpumask when creating would not affect it.
This has happened before, see patch (7cc83b62).
This patch modifies the g_vhost_core_mask to match the actual
cores in use.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I42a07c5f99690bfa4ecd2a5b9b7b04d1aa7d2800
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6188
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Documentation for vhost target states that CPU mask must be a subset
of application CPU mask. This wasn't enforced right now and allowed
the cpumask on controller creation so long as at least single
CPU core overlapped with application's CPU mask.
This might have been misleading and covered up user configuration errors.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I03f959ec37efd0be9b98cff9c93c5f996b04af35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Recently, we discovered that under the SPDK + UIO mode, it is possible that vm may be wrong when doing io.
such as:
[root@VM_6_151_centos ~]# mkfs.xfs /dev/vdc
meta-data=/dev/vdc isize=512 agcount=4, agsize=234421142 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=937684566, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=457853, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
bad magic number
bad magic number
Metadata corruption detected at xfs_sb block 0x0/0x1000
libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000
the github issue link: https://github.com/spdk/spdk/issues/1738
After investigation, we found as below:
The qemu set to VHOST_USER_SET_MEM_TABLE then call vhost_user_set_mem_table(dpdk version spdk-20.11)->mmap(without MAP_POPULATE)
the mmap will only return the virtual address not map the virtual address to the physical address actually.
after call vtophys_notify->vtophys_get_paddr_pagemap, we will get a wrong physical(the virtual address we not access)
So this patch is to set MAP_POPULATE during we use SPDK + UIO.
Signed-off-by: andypma <andypma@tencent.com>
Reviewed-by: Zhigang Lu <tonnylu@tencent.com>
Reviewed-by: Xun Ni <richardni@tencent.com>
Reviewed-by: YuZhoujian <windyu@tencent.com>
Reviewed-by: LuWeiKang <luweikang@tencent.com>
Change-Id: Ib921b6d7381f46bb5894ed787cef52e02524197a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5970
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is for packed ring and recover the ring
base when vhost target reconnect to QEMU.
Change-Id: I73f791b4a55adf9834112afd7dd7bb26c75a135d
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4128
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is for packed ring live recovery.
After reconnection we should resubmit the inflight descs.
Change-Id: I133bf5f1c09029d3c693c0fef67a609d72f2bf69
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Code cleanup to make the code looks more clear, this helps the coming
inflight IOs support for packed ring.
Change-Id: Iebca17e01e597eab2a920dd7f38056c57ae2cd11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5755
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the function also get the payload from vring descriptors,
this mixed the process of vring and virtio_blk together, now it's
only related with virtio_blk.
Also this make the resubmission process more clear.
Change-Id: I6dd17cf9e30dde99e50a7c6d345b6eee7fa5b758
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since there may be race condition, num_events gotten
from kickfd is not always right to reflect the number
of requests in virtqueue. So remove this check.
Instead, avail_idx in memory reflects the real situation
whether there is unprocessed requests in queue.
Change-Id: I4e59242cf3101ece912777533411bc4dcdc81c9d
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
kickfd of virtvq should be akcnowledged firstly in
vhost_vq_avail_ring_get function, in case there is
no available requests then kickfd won't get acked.
Change-Id: I9c2f0cc19be9da54649991ddab5a5b5640ed941a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Flag VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP is only used for WRITE
ZEROES command, vhost-blk target may tell VM via 'write_zeroes_may_unmap'
configuration that the backend can support this flag, however, Linux
generic block driver doesn't have such logic, it will enable this
flag by default(without REQ_NOUNMAP) with WRITE ZEROES command,
so the backend may choose to ignore this flag, because WRITE ZEROES
with this flag isn't mandatory.
Fix issue #1714.
Change-Id: Ic9388f39269720a23c00d41cba585d2a5abc3cfb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
This patch is for packed ring live recovery.
First step is to track the packed ring descs.
This feature base on this QEMU patch:
https://patchwork.kernel.org/patch/11766697/
Change-Id: Id0ccb6fd12b3623cc367424f496b4ffc5323f390
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the virtio-scsi controller doesn't support the 'eventq' and
'controlq' queue, the operation(vhost_scsi_controller_remove_target)
of removing target from this controller will always hang.
We can reproduce this by starting a qemu without a bootable guest os.
Change-Id: Ia53b48ae1a18cfb9dc919352fc3cce6ade84c9d8
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If interrupt mode is set, related poller functions will be
registered to interrupt handler instead of poller.
interrupt_tgt can work as vhost-blk target to support VM.
Change-Id: I3a15f9a63532f44fe0d2f0cb69b0efdd72431d10
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch removes legacy config support in vhost_blk/scsi library.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia63651cdb7433267d1a8839a1739e68b436e5d08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The internal vhost library is used when DPDK's version
is older than 19.05 and the experiemntal vhost nvme
target.
For the CONFIG_INTERNAL_VHOST_LIB option, SPDK doesn't
enable this option by default over one year and CI
doesn't cover it either, so we may remove it with
this release.
As for the vhost-nvme target, since we are developing
a new vfio-user target solution, it's OK for us to remove
it now.
Change-Id: Ib2cce1db99cd09754307c2828b3187f2d4550304
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4562
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Open a bdev whose name matches bdev_name first in spdk_vhost_blk_construct()
to avoid using spdk_bdev_get_by_name() to fix the race condition
due to the time gap between spdk_bdev_get_by_name() and spdk_bdev_open_ext().
A pointer to a bdev is valid only while the bdev is opened.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I99fedd696aa44bb46c1fcc4f49ca37069f7adfef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
If the capacity of scsi bdev has changed, vhost-scsi should
notify the guest to handle this change.
Change-Id: I1087b28cdb719f6b727ff0ae486cee6a0719bb0c
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4124
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When the vhost-scsi target needs live recovery, check the inflight share memory,
and resubmit the inflight io.
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: I785476c8835053a4e8d4f1d692437feaf3a9ace1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4092
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove assert and add exit codes instead. That in non-debug mode, these
could lead coredump. We don't want the vhost target be crashed after
recieved invalid commands.
fixes issue: #1575
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ifef6d8f9c32150213bc2c80787e92d428d4c49c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3951
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to resize the backend bdev of vhost-blk
and notify the guest OS that the capactiy of virtio-blk
disk has been resized.
The spdk api entry is `spdk_bdev_notify_blockcnt_change`.
Any bdev if used as vhost-blk backend may need to implement
a rpc that calls this function.
Related DPDK patch has been merged and release in 20.02.
https://www.mail-archive.com/dev@dpdk.org/msg153365.html
Change-Id: I961c61de0fc03e210d776035a40f3a4adfa9b4f3
Signed-off-by: Li Feng <fengli@smartx.com>
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1468
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
