Split the connection process across two states, which allows the
transport to connect the admin queue asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie84477331df0abf5ffdfc2a0ff5d5ada760c9e73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Modified the async_list to be per-process instead of
on the controller object. This allows an NVMe multi-
process setup to have Asynchronous Events Reported
to each process that may interested in them. In the
previous case, where the async event list was on the
controller object, AER (Async Event Requests) would
not be reported to all the processes.
Fixes: #1874
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I3e885c0cf5a0fd471d243bc7d96a8b7ffe65d14b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8744
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was accidentally merged as part of c3a5848.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I430e7035e9c2baf0b8d0592cda76265957c3791e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9251
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Split the NVMe controller reset into pre-init and reinit stages so
that the latter begins with a call to nvme_ctrlr_process_init(),
returning -EAGAIN if the controller is not yet ready so that a poller
can call it again later.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Ia182b04e438241b139109be93f3ed858fac7f3d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implement an async variant of spdk_nvme_ctrlr_reset(). This initial
implementation only allocates a context and returns it to the caller,
relying on the caller to poll the context to execute the existing
spdk_nvme_ctrlr_reset() implementation.
Wire up spdk_nvme_ctrlr_reset() to use this async variant to verify
that NVMe controller reset still works.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I75d4b75dbf5897db452ee65286aef5a4eb839fca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If there are completed asynchronous events that have not been notified
to the user, free them during controller shutdown to avoid memory leaks.
It can happen if an event completes before user has a chance to execute
`spdk_nvme_ctrlr_process_admin_completions()`.
Fixes#2032.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie608bf9100342f8dfd709e070326f67335d27fed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
NVMe bdev module manages ANA log page itself now. So NVMe driver
should disable managing ANA log page.
Add a new option disable_read_ana_log_page to struct spdk_nvme_ctrlr_opts.
Then NVMe bdev module enables it when calling spdk_nvme_connect_async().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5249efe90a4d50763c3a7eaa1eb9572f60fbc8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This fix is as same as for NVMe bdev module.
If a ANA log page has two or more ANA group descriptors, the second
or later of ANA group descriptors will not be 8-bytes aligned.
Then runtime error would occur as follows:
runtime error: member access within misaligned address 0x612000000074
for type 'const struct spdk_nvme_ana_group_descriptor', which requires
8 byte alignment
nvmf_get_ana_log_page() in lib/nvmf/ctrlr.c creates a ANA log page
data and processes 8 bytes alignment correctly because we got the
same runtime error before. However, lib/nvme had been missed at that
time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idaa610544dc5cb659c387fcd38a2b4b97cbd06e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8398
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
The next patch will add an new controller option, disable_read_ana_log_page.
Initializing ns->ana_state to optimized before reading ANA log page
will simplify the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I34e56a2b454e4c02e1899f972e0ad675f2ebe2a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using the CMB for SQs is not a standard use case.
Performance can vary widely when using CMB for SQs
and is typically not the configuration used for
benchmarking.
So let's change the default value here to 'false',
users can still opt-in by setting this option to
true in the spdk_nvme_ctrlr_opts structure prior
to attach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab746ba777b04152ffb92fea2a2bb923a0a0bf21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8227
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe driver layer will clear this log, so we don't
need to send another one in the aer callback.
Here we change the logic to compare with previous NS
state, if the NS state is same it will fail the test.
Change-Id: I6d80cb6a5f6d5eab92b8ccac601a23c19cea4003
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8175
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We need to wait to process this quirk until after we
have a valid CAP register value. Before this fix,
controllers with this quirk would get their io_queue_size
always capped at 2 (min io queue size) because CAP hadn't
actually been read yet.
Fixes: f5ba8a5e (nvme: add NVME_CTRLR_STATE_READ_CAP)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4df87b5dfb0faa21db5b4cf6fc667d80621d1691
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8211
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Each time the following file
"/sys/kernel/config/nvmet/subsystems/nqn_name/namespaces/ns_id/enable"
on the target side was changed, the SPDK initiator should receive an
async event (type: SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE, info:
SPDK_NVME_ASYNC_EVENT_NS_ATTR_CHANGED).
But actually not.
Since for SPDK, when target sent the non-first event, the condition
"nvmet_aen_bit_disabled(ctrl, NVME_AEN_BIT_NS_ATTR)" that prevents
target from sending event was matched.
This commit fix this issue by issuing a get_log_page cmd for each async
event received, just as the kernel initiator does.
Fixes#1825.
Signed-off-by: tyler.sun <tyler.sun@dell.com>
Change-Id: I2973470a81893456ca12e86ac390ea1de0eed62c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we were only checking trtype==PCIE to
determine whether a controller was fabrics. This
skipped the vfio-user case. So use the new
spdk_nvme_transport_id_is_fabrics() API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81f26853f44b1c47522ce6354e5aa4a905796bd0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8089
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Initialize ANA state of each namespace to optimized regardless of
whether ANA is supported or not. This will simplify the code to get
the optimal I/O path because we do not have to care if the namespace
supports ANA.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24dfe08674af398671de6528b884e9d82409eeae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7890
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We map the SPDK_NVME_TRANSPORT_* values directly to
the NVMe-oF trtype values. Since PCIe isn't
Fabrics, we choose 256 which is outside of the
8-bit trtype range of values.
So we can just check if trtype >= 256 to determine
if the trid is for fabrics or not. This is
preferable to checking PCIE || VFIOUSER in case
additional non-fabrics transport types are added
in the future.
I considered taking a trid as the parameter instead,
but went this route since it is consistent with
the existing spdk_nvme_ctrlr_is_discovery().
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib62ff4d30549b2324486c81f2dce67f0f1741e9b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Connect the adminq as part of controller initialization
instead of controller construction.
We never actually 'connected' the adminq for
PCIe or vfio-user transports, since its a nop.
But their connect_qpair transport ops function
is also a nop for the adminq, so it's fine to
generically connect the adminq across all transports.
Note that we cannot read registers (cc or csts)
during controller initialization now until after
the adminq has been connected since reading fabrics
registers depends on a connected adminq. This gets
special cased for now, but eventually reading
cc and csts will need to be part of the state machine
itself to make it asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia5566d7c549d78d24b94ea253df51e697da6237f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This ensures the discovery ctrlr initialization is
done the same as normal ctrlrs. This will be
critical as we make the driver fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33c4fd7c82d241c30e7adb89abe79b8088c8776a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Read CAP (Capabilities) register as part of controller
initialization instead of controller construction.
For now, still read CAP in the pcie and vfio-user
controller construction, since they need the
drstd (doorbell stride) to construct the admin
queue.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I000fe880f2ec0d6de1d565c883d7ea0ae1ac2c81
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8078
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We're going to be adding some new states (READ_CAP
and READ_VS) in future patches, that we want to
come before the current "INIT" state.
So we will simply make "INIT" have the same
value as this new NVME_CTRLR_STATE_CHECK_EN state
for now. That means existing code won't have to
change later once we add new states that come
before CHECK_EN.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07ca92e28ab1cd8d838cdef5c3ff36ba80a224bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8075
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This patch changes the order of IDENTIFY_ACTIVE_NS and CONSTRUCT_NS
controller states. It is required to further improve memory management
for namespaces by allocating memory only for active ones.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ie540442b1bd9e897afcbaa4319c139109dd0c515
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6503
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous implementation allocated memory just once at the beginning of
active NS list retrieval procedure. It allocated memory for maximum
possible number of active namespaces, i.e. 'cdata.nn'.
This patch changes allocation logic. One page is allocated at the
beginning. If more is needed, reallocation is done with one more
page.
This patch also removes SPDK_MALLOC_DMA flag from allocation since we
don't do RDMA directly into this buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Iaa80c4d70c54daaf71dcbf755c63a01a1d83b772
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the format command is issued, the kioxia drives responds with "NS Attr change" notices.
In the callback function of the notice, the CQ Head Doorbell is updated twice with the same
value while issuing the Active NS list & identify NS commands.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I8cc80fba0a226c22753e605ef3129602a9313ce7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7149
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also update the UT.
Change-Id: I6086bf4cafca8a917a467490955d7df0ba8930d5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7495
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously we can only remap NVMe command using PRP, now we add
the SGL support.
Change-Id: Iec352d858a07bdd3d5f261336d6fa1167ba7aa79
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7279
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API `spdk_nvme_map_prps` is used in nvmf/vfio-user to
remap VM's NVMe command data buffer to local virtual address,
and for command using PRP, there maybe multiple pages, when
parsing the PRP list to local IOVs, we need a parameter to check
that the maximum number of vectors can't exceed the IOVs, this API
can't meet the requirement, while here, we add a new API `spdk_nvme_map_cmd`
and with a new parameter `max_iovcnt` to fix this case, and it can
also cover the command using SGL in the coming patches.
Change-Id: I71063524bed16ee3434103867a556d3741e55326
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7278
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change spdk_nvme_map_prps to a internal fucntion with
a new parameter `max_iovcnt` to protect the IOVs. Also
for the purpose to keep API compatibility, we still leave
the API here.
Change-Id: I9a638beb87aab20bba5f8a4fa0a9396110d56aff
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7335
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This prepares for an upcoming patch to fix issue #1701 which
requires handling async events outside of the check
completions loop.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I4985d814903143511383172b1a443580db33a78f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7416
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Introduce new utilities NVME_CTRLR_ERRLOG, NVME_CTRLR_WARNLOG and so
on to output the ctrlr's identification at different log levels.
For RDMA and TCP, the subnqn will be output and for PCIe and custom,
the traddr will be ouptput.
Change-Id: I81a112463bf752999aa1fe4e0c867d88e09a2f64
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7057
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the following nvme controller statemachine states:
NVME_CTRLR_STATE_IDENTIFY_NS
NVME_CTRLR_STATE_IDENTIFY_ID_DESCS
NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC
The statemachine can either:
- Jump to succeeding state
- If active ns list is empty, jump directly to NVME_CTRLR_STATE_CONFIGURE_AER
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
Simply this such that we either:
- Jump to succeeding state
- In the unlikely case if NVMe completion error, jump to NVME_CTRLR_STATE_ERROR
This will help to reduce the complexity of the nvme controller statemachine,
especially considering that there are new additional states
(NVME_CTRLR_STATE_IDENTIFY_NS_DIRECTIVE and
NVME_CTRLR_STATE_CONFIGURE_NS_STREAMS) currently on review that would continue
with the bad habit of having three possible jump states instead of just two.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I3242052b1108afcd8adbe6d0378b1358fef58ec8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6521
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Identify application prints the PMR details if it is supported
Signed-off-by: Krishna Kanth Reddy <krish.reddy@samsung.com>
Change-Id: Iaba4c15e18e1402035b11a34b2defe8078855751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6209
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixes#1777.
When a qpair cannot be allocated because the transport connection fails,
the qpair was freed without unlinking it from the other structures.
This was leading to a segfault when attempting to create and free other
qpairs.
Also added a unit test to cover this case.
Change-Id: I74b78d1847f90117248b07203b43a11ff5cfa5d6
Signed-off-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6272
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add two async API for Directive Send and Directive Receive.
spdk_nvme_ctrlr_cmd_directive_send;
spdk_nvme_ctrlr_cmd_directive_receive;
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Icb6974f74902df1512a5ffa9835188132634291b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5803
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As log shows
00:06:32.300 [2020-12-18 21:13:35.511014] nvme_ctrlr.c:1414:spdk_nvme_ctrlr_reset: *ERROR*: Controller reinitialization failed.
00:06:32.300 [2020-12-18 21:13:35.511104] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511132] bdev_nvme.c: 392:_bdev_nvme_reset_complete: *ERROR*: Resetting controller failed.
00:06:32.300 [2020-12-18 21:13:35.511240] nvme_ctrlr.c: 925:nvme_ctrlr_fail: *ERROR*: ctrlr 192.168.100.8 in failed state.
00:06:32.300 [2020-12-18 21:13:35.511511] bdev_nvme.c: 556:bdev_nvme_failover: *NOTICE*: Unable to perform reset, already in progress.
if spdk_nvme_ctrlr_reset() failed, nvme_ctrlr_fail() is called, and
then if spdk_nvme_ctrlr_process_admin_completions() failed,
nvme_ctrlr_fail() is called.
We don't know which one comes first but nvme_ctrlr_fail() should do
nothing if the ctrlr is already failed.
Hence we should avoid setting ctrlr->is_failed and calling
nvme_transport_ctrlr_disconnect_qpair() twice.
However we should set ctrlr->is_removed if the parameter hot_remove is true.
We do these changes in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac37c892e054fb59d78e69346ca7f0575d596235
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5694
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In some extreme use cases, an SPDK process could get
swapped out for a long period of time just after
we checked the state but before we called spdk_get_ticks().
So now we will only timeout if the timer expired before
we checked the state *and* the state did not advance.
It's possible we could just move the timeout check
to before the ctrlr->state switch, but I was
hesitant to change the flow for this case.
Fixes issue #1720.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I95b1db3365b5d2d8a65e528f53c302a724d44460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5596
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Explicitly test for not __linux__ where that is the intent, rather
than testing for __FreeBSD__.
Cast pointer to uintptr_t before aligning it, rather than using
a specific integer size which may not be large enough to store a
pointer.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Icfe219e1bbb2d06b3ef05710fac5b7091d340251
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5142
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The zone append command, which is part of the Zoned Namespace Command Set,
has a maximum data transfer size that can be less than or equal to mdts.
Since zone append commands will not be allowed to be split, the user has
to be able to get the maximum zone append data transfer size. Add a
function that returns this limit.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9da2672ea8a307ff62251c069a42f7540765e08b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5140
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Zone append is an optional command in the Zoned Namespace Command Set.
Add a convenience function to check if the controller supports the zone
append command.
The ratified NVMe TP 4056 added a CSI field (in cdw14) to the Get Log Page
command. However, since there already exist two public functions to get a
log page (spdk_nvme_ctrlr_cmd_get_log_page() and
spdk_nvme_ctrlr_cmd_get_log_page_ext()), avoid creating a third one for
now, since nvme_ctrlr_get_zns_cmd_and_effects_log() itself can leverage
one of the existing public functions.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I99516dbac8db6714488b4d6cabe64c27f46d6153
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5078
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Remove superfluous parentheses around ctrlr->cdata.mdts.
They provide no value while making the code harder to read.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I4342d87f0e33fd92fe76357eb0379fb1e9c8f98f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5138
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
While I assume that the initial thought of having the
NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it is
waiting for, was to make it clear for the reader in which order the
states will be executed.
However, it feels silly to have the same code copy pasted everywhere.
Someone who needs to add a new state will still need to edit
nvme_ctrlr_state_string() and enum nvme_ctrlr_state, which still defines
the NVME_CTRLR_STATE_WAIT_FOR_* state directly after the state which it
is waiting for.
In one way, moving the NVME_CTRLR_STATE_WAIT_FOR_* states to the end of
nvme_ctrlr_process_init(), when reading nvme_ctrlr_process_init(), it is
actually easier to see the ordering of the states which actually do
something of significance.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia95ea5ac3c44a53179edbdc65cba45bec94e469f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5115
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Section 7.9 of the NVMe spec says that all nqns must
start with "nqn.".
Fixes issue #1669.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fd0e6a0a397e831c4fa2377126b6b1e1b127d88
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5017
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This fixes#1423 where the completion loop never
breaks when the NVMe ctrlr is no longer present.
This condition can happen during a hot remove.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: Ia238c8aeae720832068de28ce4d34a9d233344fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4831
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add two new helper functions, nvme_ctrlr_detach_async() and
nvme_ctrlr_detach_poll_async() to make the internal of
spdk_nvme_detach() asynchronous.
Use callback function to remove controller from the attached list after
completing shutdown and before freeing to avoid conflict between
attach and detach.
Update MOCKs in the corresponding unit test cases.
The next patch will add two public APIs spdk_nvme_detach_async()
and spdk_nvme_detach_poll_async() based on this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifbdfec2a1facde9354007c6248f280e245a36eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following the last patch, separate nvme_ctrlr_destruct()
into nvme_ctrlr_destruct_async() and nvme_ctrlr_destruct_poll_async(),
but keep nvme_ctrlr_destruct() by replacing the internal by
nvme_ctrlr_destruct_async() and nvme_ctrlr_destruct_poll_async().
Add shutdown_complete to nvme_ctrlr_detach_ctx. If shutdown_complete is true,
we can destruct the controller. The case that nvme_ctrlr_shutdown_async()
failed sets shutdown_complete to true. The case that nvme_ctrlr_disable()
is called sets shutdown_complete to true unconditionally.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3994e259f9d3ccf8fede3ac03aadef911eefb9dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is the first of the patch series to make spdk_nvme_detach()
asynchronous.
We have lengthy shutdown notification, i.e., we have to wait a long time
until shutdown processing is completed, in some SSDs. If the running system
has many such SSDs, we see large intolerable delay.
SPDK provides a controller option, no_shn_notification as a workaround.
We can use the workaround if the use case of the detach is to switch to
the next application without system reboot. However, we cannot use the
workaround if we want to do system reboot after detach.
To mitigate such lengthy shutdown notification, we need to parallelize
detachment among SSDs.
Hence the patch series will introduce an asynchronous detach API and
will use the API to parallelize detachment.
This patch adds the following changes.
Introduce a context structure and separate nvme_ctrlr_shutdown()
itno nvme_ctrlr_shutdown_async() and nvme_ctrlr_shutdown_poll_async()
using the context structure.
Name the context structure as nvme_ctrlr_detach_ctx because it will be
used only in internal APIs. The upcoming public APIs will support
multiple detachment and will have the contest structure named as
spdk_nvme_detach_ctx.
Use TSC instead of counter because polling interval will be controlled
by the caller.
Use the convenient macro, SPDK_CEIL_DIV(), to round off the time
value in milliseconds.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2355fd24b6d6a4d6c1813577d53822304d4f33
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4414
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since namespace types were introduced in NVMe, the CC.CSS register
has a new value (SPDK_NVME_CC_CSS_IOCS) which indicates that all
supported command sets should be selected/enabled. This possibly
includes command sets other than NVM and ADMIN only.
Therefore, if a SPDK application wants enable all the command sets
that the controller supports, it has to explicitly set
opts->command_set to SPDK_NVME_CC_CSS_IOCS.
To avoid possibly a lot of SPDK applications having to set this
parameter, check if the user requested a command set explicitly,
if not, make SPDK automatically use the most reasonable default,
based on the supported bits set by the controller.
The most common case is that you want to enable (all) the command
sets that the controller supports.
A user will still be able to restrict the controller to only use
the NVM command set (or ADMIN only), by setting opts->command_set
to a specific value.
Since the current default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() is SPDK_NVME_CC_CSS_NVM,
which is defined as 0, we cannot know if the user specified a
command set explicitly or not.
To solve this, change the default command set value specified by
spdk_nvme_ctrlr_get_default_ctrlr_opts() to CHAR_BIT (0x8), which
is larger than the largest value that can be set in CS.CSS (which
is only 3 bits wide, thus 0x7).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I45ec148d3667ab87c41fbfb6d6612a1e0e5c9d9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There is an error when do following sequences:
1. Allocate an I/O queue pair
2. Do controller reset via spdk_nvme_ctrlr_reset
3. Allocate an I/O queue pair
becaues the free_io_qids was reset and didn't
restore.
Fix issue #1621.
Change-Id: Icd533f171079c12fe03be07e659e8eed9b082384
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Namespace data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Namespace data structure.
The NVM Command Set Specific Identify Namespace data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Namespace data structure is not
all zeroes, however, adding support for Key Value is outside the
scope of this patch.
The new NVME_CTRLR_STATE_IDENTIFY_NS_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY_ID_DESCS state. This is because
we need to have fetched the identifiers in the desc list in order
to know which command set a namespace belongs to.
A slightly nicer design might have been to refactor the NVMe state
machine to first fetch the id desc list, then the identify namespace
struct, and finally the identify IOCS specific namespace struct.
However, since this would have required a lot of changes, it didn't
really seem justified.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I62cbc533c2c3eec1ccf0ba9b1c414d5a70919cff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add a new state in the SPDK NVMe state machine in order to fetch
I/O Command Set Specific Controller data structures.
Right now there is only support for the Zoned Namespace Command Set
Specific Identify Controller data structure.
The NVM Command Set Specific Identify Controller data structure is
all zeroes right now, reserved for future use.
The Key Value Command Set Identify Controller data structure is also
all zeroes right now, reserved for future use.
The new NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC state is added
after the NVME_CTRLR_STATE_IDENTIFY state. That way, if support for
the Zoned Namespace Command Set is enabled during probing, we will
fetch the Zoned Namespace Command Set Specific Identify Controller data
structure, regardless if any Zoned Namespaces are attached or not, and
no additional steps will be needed once a Zoned Namespace is attached.
Since we only have one command set to fetch, avoid creating
NVME_CTRLR_STATE_IDENTIFY_IOCS_SPECIFIC substates, although that will
probably be needed when support for another command set is added.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I95535b09b03b7ef2ee9a11eebdbd28aad66d65ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4367
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Meanwhile, to verify an issue about git push unittest failure.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Idac60e5832390eb8bdce68aee639be2e9ac6cff6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4373
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add ana_state and ana_group_id to struct spdk_nvme_ns and keep
them up-to-date by updating when spdk_nvme_ctrlr is created or
ANA change notice is received asynchronously. For both cases,
struct spdk_nvme_ctrlr holds the latest ANA state.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I311fe1c8015c8b8ac9659c38661244706c04b3e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an internal API nvme_ctrlr_parse_ana_log_page() to parse an ANA
log page and execute the specified callback function for each
ANA group descriptor in the ANA log page.
We will be able to copy the ANA group descriptor to the caller instead.
To do that, we will need to inform the size of the descriptor first,
but the size will not be constant.
Passing parser to the API will be more convenient.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd8fda30a83965948017fb8ad992c0d889197cde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When creating a controller, allocate a buffer to the controller
and read ANA log page into the buffer.
When receiving ANA change notice, read ANA log page into the buffer
to keep the contents up to date.
The next patch will provide a public API to get the contents of
ANA log page the controller holds.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5c653f4e80d157e5120bb754e6660250b2b8fa1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With the introduction of namespace types, the identify command has
gained an additional parameter: Command Set Identifier (CSI).
This parameter is similar to the existing parameters NSID and CNTID,
and is not used by all CNS values.
Most notably, the CSI parameter is not used for the existing CNS
values 00h (ID NS) and 01h (ID CTRL).
There are new CNS values, e.g. 05h (ID IOCS specific NS), and
06h (ID IOCS specific CTRL), which do take the new CSI parameter.
The new CNS values instead return Command Set Specific data structures,
which is basically an additional data structure. Therefore, the CNS
values 00h and 01h are very much still in use.
(Even the NVM Command Set has a Command Set Specific data structure,
even though all fields in that data structure are currently reserved.)
Since the CSI parameter is unused by all the existing calls to
nvme_ctrlr_cmd_identify() (since none of the calls send in a CNS value
that uses CSI), simply send in 0 for all existing calls.
No functional change intended.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ia2b2324393a0707152b2f8511f0a22ad4a12bd46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4309
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the command set identifier might be accessed at several
different states in the nvme state machine, cache it so that
we don't need to loop through the ns id desc list every time.
This is similar to how other identify fields are cached using
nvme_ns_set_identify_data().
None of the identifiers in the desc list (including the new CSI)
can change over the life time of a namespace, so caching them
should be safe.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ie06180a4b3750dfa1a42f47afe0f7f9e3ec04ba9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4266
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the nvme completion was an error, the function will return,
so there is no reason for an else statement.
In fact, the else statement in nvme_ctrlr_identify_ns_async_done()
differs from the coding style used in other nvme_ctrlr_identify_*
functions, and arguably makes the code harder to read.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If76b823b7ca04ab98abb2912927c344ee9f12314
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4265
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In cases where the SPDK nvme driver is being used as a validation/test
vehicle, users may need to allocate a currently unused qid that can be
used for creating queues using the raw interfaces. One example would be
testing N:1 SQ:CQ mappings which are supported by PCIe controllers but
not through the standard SPDK nvme driver APIs.
These new functions fulfill this purpose, and ensure that the allocated
qid will not be used by the SPDK driver for any future queues allocated
through the spdk_nvme_ctrlr_alloc_io_qpair API.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I21c33596ec415c2816728a600972b242da9d971b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3896
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This may happen when resetting a controller, if the ADMIN queue failed
to reconnect, the controller is set to failed state, so for this case
we don't need to loop until timeout, just exit.
Change-Id: I2b37af5453086cd64f3609c41eb8f6475da55fd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4143
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: JinYu <jin.yu@intel.com>
If ctrlr->cdata.cmic.ana_reporting is 1, set the corresponding
field to true.
Then use its API in the identify application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e74bc4c114883e4aecdbee7a6f1a02027db23a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4156
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for getting the Command Set Identifier for a given namespace.
The SPDK_NVME_CAP_CSS_IOCS feature can be implemented on top of an old NVMe
specification. If the feature is set, retrieve the NS ID Descriptor List
regardless of the NVMe specification version. The quirk is still respected.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7b257115ecb0d813ba75201c0f48960c7070dcc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4085
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are two bugs:
1, When the target response 0, it means target does't
support keep alive.
2, Change the interval time to us so when the keep alive
timeout is 1ms then the interval is 500us.
Fix github issue: #1565
Change-Id: I75707ab0e4e639209a9c50ef326492fae213044d
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4077
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an oversight that can cause issues with looping
through the list if we end up allocating the same qpair
twice.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I513ea35398f4b724366c21be144531fbfbdb4347
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3835
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the transport is broken, we should set errno code in
spdk_nvme_ctrlr_process_admin_completions instead of keeping silence.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie73763e1329e12a8c82a0223d360991f86c39be3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3773
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows for much more granular control over the timeout.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib23de21e60eec4207c55320579699edf284f4e16
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3794
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When a process cleans up IO qpairs from another crashed
process in a multi-process environment, we must not try to
abort reqs for that IO qpair. Any reqs will contain callbacks
for the crashed process which we must not try to execute in
a different process.
Fixes issue #1509.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5e58cce7bdb86e3feb4084733815c086901f867e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3536
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function hasn't kept up properly with the states that
we use for tracking the qpair lifecycle.
Add checks for NVME_QPAIR_DISCONNECTING and NVME_QPAIR_DESTROYING.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I51607d4f00e94937b08fca28e766163580d46461
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3359
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the user requests a non-default command set configuration, via the
probe_cb() supplied to spdk_nvme_probe(), which is not supported, then
the controller initialization will not proceed.
This patch changes that behavior into falling back to the NVM command
set and continue with the controller initialization. It is done by
assigning the NVM command set to opts.command_set such that the user
knows in attach_cb() with which command_set the controller is
configured/enabled.
The fallback is needed since the user does not have access to the
controller capabilities register. The strategy left for the user is thus
to try. However, this is an issue, as the user only has one attempt, as
subsequent calls to spdk_nvme_probe() will not trigger probe_cb() for
the controllers whose initialization did not proceed.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Ia414628fcd7d56956649647775462e62d98c0a90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2931
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These SSDs set the oacs.security bit but do not actually
support OPAL. So do not set the controller flag indicating
SECURITY_SEND_RECV support in this case.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7fcfeafcc8d9439a1c53c60a1aea1801923a2ce5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3156
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ctrlr->outstanding_aborts is counted only for submitted abort requests.
However ctrlr->outstanding_aborts had been decremented for queued
abort requests by mistake.
Subsequent patches will use parent-children for abort requests but
nvme_free_request() is not aware of such relationship.
Queued abort requests had not been canceled or aborted when controller
was destructed. Retry submitting queued abort requests had been
repeated recursively and had caused stack overflow.
This patch fixes all.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8ce0ae51ddd5ed3e1e8ac86329c8bdb7a9236b2f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: Make the initilaization in order.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I66962073a02b6a4c2fc79ac343cdf5310075dd63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
