This touches the rte_pci_device structure, so let's
make a separate accessor function just for that.
We will start putting the definitions for these
new dpdk_pci_device_xxx functions at the end of
pci.c. At the end of this series, we will then
just lop off the end of pci.c containing all of
the dpdk_pci_device functions and move them to
a DPDK-dependent pci_22_07.c file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0323fc19b51d21d1bac899df21d6ebf4354ab339
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14542
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
struct rte_pci_driver will become private, and its
size may change between DPDK releases. But we want
to keep the spdk_pci_driver structure generic. So
allocate 256 bytes of space for the rte_pci_driver
structure, which is far more than the 104 bytes it
currently occupies. We will keep a struct
rte_pci_driver pointer to this memory in spdk_pci_driver
which can be set up in the generic code. This will
make it easier in future patches to make sure that
anything actually touching the rte_pci_driver
structure will be in the separate DPDK dependent
files.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29aa7e71137da25a5480b34c71f2e0d5c9c02eae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14541
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Preparing for potential 22.11 changes, refactor this code using DPDK api:
- a bus device list can be walked through via RTE_DEV_FOREACH,
- a reference to the bus object is directly available under the device,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id3a21a6e62dfa1619a92465fac5a82afb9b43cb0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14532
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Also remove all pci-related DPDK includes from
env_internal.h, and add rte_bus_pci.h to pci.c
only.
Now pci.c has all references to DPDK pci-related
header files and data structures.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5f1727d465eaa73cf71d2f3589cecd3ebb83eb85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14531
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This moves the only references to the rte_pci_device
data structure from memory.c to pci.c. This helps
prepare SPDK for possible changes to DPDK around
visibility of these DPDK data structures, making it
easier for SPDK to manage if only one file is
affected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I26b1907fabd7a6c23701523811abd1ce12606683
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14530
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It'll make it possible to remove a PCI device from within the callback.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4cea2207a29bb145aee968715e873076a8c0993c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13956
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
This makes it possible to notify other PCI device providers (VMD) that a
PCI device is no longer used. The VMD will driver will unhook that
device and free any resources tied to it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I42752afbb371a1d33972dac50fd679f68d05b597
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13887
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Now that we have a attach_device() callback, the devices can be hooked
during spdk_pci_device_attach(). With DPDK, driver->cb_fn() is called
in pci_device_init(), so we need to do the same in
spdk_pci_hook_device().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Iada8b83ce7592aa62561530192072a50ec3a904b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The primary motivation for this patch is to allow the VMD driver to be
notified of when users wants to attach a device under a given BDF and to
make it more similar to the regular PCI path. Currently, the way the
VMD driver scans for the devices is a little bit different. The initial
scan is done during initialization and there's a separate poller for
checking hotplugs. Also, there's no device_attach() interface, so with
hotplug poller disabled, it isn't possible to attach to a device not
present in the initial scan, even if the BDF is known.
This causes a few issues. First of all, the VMD library isn't notified
when a device is stopped being used (i.e. user calls
spdk_pci_device_detach()), so when such a device is hotremoved, it never
gets unhooked. But we cannot simply add a spdk_pci_device.detach()
callback, as this would break cases when user detaches a device (without
hotremove) and then tries to reattach it again (via
spdk_pci_device_attach()), as the VMD doesn't get notified about the
device_attach() call.
So, in order to resolve this, a device_attach() callback is added, which
will notify the VMD library that the user wants to attach a device under
a specific PCI address. Then, in subsequent patches, a
spdk_pci_device_provider.detach_cb() callback is added to make sure that
devices are unhooked once they're no longer used.
Once that is done, it'll be also possible to get rid of the VMD hotplug
poller by adding something like scan_cb() to spdk_pci_device_provider and
call it from spdk_pci_enumerate().
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I084a27dcd12455f0f841440b7692375e80d07e84
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13883
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:
1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names
Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.
Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
rte_power was added to DPDK long time ago,
but some of the DPDK packages do not include it.
For those cases just skip building components that depend on in.
This change still allows to use dynamic scheduler, since
the dpdk_governor usage is optional.
Fixes#2534
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ied88edc8d58aae07d1384c1c40203fc80b919d80
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12993
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
dpdk_governor and gscheduler use rte_power,
which is only available on Linux and when
DPDK env is used.
Rather than repeat those checks in each mk or Makefile,
added DPDK_POWER flag directly to DPDK env.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I438caad8d333a4df697a79aa45de2930cce71d23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12992
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rte_net is a dependency for both rte_vhost and rte_power.
Next patch will simplify the checks to include rte_power,
and keeping this depenency next to component that directly
depends on it will make it easier to understand.
Since DPDK_LIB_LIST is sorted by the end of the env.mk,
it shouldn't be a problem to include the rte_net twice.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If2bb2aa5d972148ca8143023657b0aec45306a08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12991
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We already list the libraries with their explicit
pathnames, so the -rpath-link serves no purpose.
Our Makefile was actually specifying this option
without an = sign - i.e:
-Wl,-rpath-link /path/to/lib
On the submitter's system, this resulted in an error:
cc: Missing argument for -Wl,-rpath-link
I have no idea why no one has ever run into this
error, except for this one submitter. But removing
the -rpath-link is the right thing to do here, since it
is not needed - so do that rather than adding the =
sign and continuing to figure out differences in
-Wl option processing on these different systems..
Fixes issue #2540.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4f6176e55701a5dea5b10bba1ad621250cb5cb51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12984
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.
Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".
Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>
Intel Analytics Accelerator, this is the start of the patches to
add this support to accel_fw.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7410710697d2947355181616b35cc8ab78bbddfe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11985
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In prep for adding IAA support
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7eed173f9f907aa1c010d12db87b8dc27cd7495b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12760
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When using the SPDK nvme driver in multi-process mode,
and multiple processes detach from their devices
(i.e. at application exit) very close to each other,
there are cases where a process can have started its
own detach, and then get two remove notifications - one
from its own detach, and another from another process'
detach.
So we need to remove the assertion in pci_device_fini(),
if the removed flag has already been set.
Fixes#2456.
Tested using a modified version of the
nvme_multi_secondary() function in test/nvme/nvme.sh
that starts several additional perf applications.
The test consistently failed without this patch,
and passes every time with this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I91e16985cdc4a463aaac2c45096bb967aab85560
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12454
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This was added in patch 07526d85, back in March 2018.
This was before DPDK supported dynamic hugepage allocations.
Presumably this flag was added to reduce the amount of
memory lost due to mempool buffers that would otherwise
span an IOVA boundary (mostly typical with IOMMU off and
we are relying on physical addresses).
Removing it simplifies any code in SPDK that uses
mempool buffers for DMA operations, since it doesn't have
to worry about splitting buffers that span an IOVA
boundary - DPDK has already done it for us.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I49f6c1407fad02acae7e07c9dd00cb0449bd3554
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12277
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The current error handling of `spdk_mem_map_notify_walk` has off by 2
issue. This issue can split one memory region to multiple smaller
regions when calling the callback to unregister the memory region.
Also, in case of failure, the 1 GB maps of the map failed to be freed.
RDMA doesn't support this behavior and support calling the callback only
once for each previously registered memory region.
Signed-off-by: Aviv Ben-David <aviv.bendavid@vastdata.com>
Change-Id: I65b667f2e84533f234a2e330b20e9ad9eef32854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11219
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Added build system logic for checking mlx5 crypto PMD support. Added
required libs in make files.
- Changes in mlx5 reduce build system logic since both crypto and reduce
use common libs and libmlx5 related checks.
- Both mlx5 crypto and reduce require -libverbs.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ice1b88fe74bb04bf715ecaac70c4a8d4f3b5d782
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When using --with-dpdk=dpdk/install option, we need to check if the
librte_compress_isal was built in DPDK before adding it to the list
of libs. rte_compress_isal is not built by DPDK if libisal is not
installed in the system.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iceb4ebb8cee81aa4254e0a878653c8a8dd50cac6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11618
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- In case that --with-dpdk=dpdk/install option is used, we need to link
with the proper IPSec_mb libs the DPDK was built with rather than using
the default location of IPSec_mb submodule located inside the SPDK dir.
- Check with pkg-config if we need to link with IPSec_mb. Find the proper
IPSec_mb library path for DPDK specified with --with-dpdk=dpdk/install
option.
- Use the same behavior for plain --with-dpdk.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iea56d20d20556d63cb7ffb5ce2ca78f2244796e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11617
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- DPDK may or may not decide to use libbsd. SPDK needs to find this out
and add -lbsd to the list of libraries to prevent linking issues in
case that --with-dpdk=dpdk/install option is used.
- Use pkg-config for proper detection if the libbsd is in use.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ie3de0363fefb9b7337394b00adc862839834f164
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11616
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The only release to not unlink hugepages after mmaping
them is for multiprocess. But if shm_id is not
specified, then we aren't using multiprocess. This
ensures that all hugepages get released when the
process exits, even if there is memory in those
hugepages that was not freed during process shutdown.
Make sure we don't enable both huge-unlink and
single-file-segments at the same time though, DPDK doesn't
support that.
Note that even when using multi-process, if hugepages
aren't released, they aren't really leaked. DPDK will
clean them up next time the application runs.
Fixes issue #2267.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I017bd4f7ed9cf6aaa141879539b099fb48f357f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10991
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
rte_dmadev was introduced in DPDK 21.11, and rte_vhost
is now dependent on it. So link rte_dmadev if we find
it and if CONFIG_VHOST is enabled.
Fixes issue #2374.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iccbf7cb897f51cbc9d545274d4d00a442b2fd353
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the future releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 22.05
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id1a5358882dc496faa5b0b5c9a63b326c378c551
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK could be compiled as shared libraries by specifying
`--default-library=shared`. This is the default in packaged DPDK.
Building SPDK statically did not work with such DPDK builds,
since we always assumed the same type for both.
This patch makes detects the type of builds separately and
allows for any combination.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I40b81446cc1c02f18a0b986fb5f0a7a6e31de467
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6491
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev fio plugin has a destructor function that
cleans up the initialization thread, and we can't
have it run after we've cleaned up DPDK or we get
seg faults.
The toolchains reserve priorities 1 to 100 for
internal usage, meaning 101 is the highest usable
priority level. We'll use this for the env_dpdk
destructor priority, meaning it would be the last
destructor to execute.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I36718f9413267192d1c1dcec983a0f51b5d5b798
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11085
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change introduces initial experimental wrappers for enabling/
disabling rte_pci_device interrupts and for getting event file
descriptor assosiated with an interrupt.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: Iba1ba1e57a3555001502859d0bb2c655c07bf956
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
We already use destructor functions in env_dpdk to do
some cleanup at process exit, so let's also add one
to call rte_eal_cleanup. This ensures all hugepage
files are freed before the process exits.
Fixes issue #2267.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8c93f503d77f35717b3d18a63ea49b31789dbc00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10983
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These APIs are not safe, since they do not hold the
pci device lock across calls, which can cause problems
if a device is inserted or removed while handles
returned by these APIs are being used.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01a80f26d0a0ca4cdfc7181359932b38da8dd43a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10659
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is a safer alternative to spdk_pci_get_first/next_device,
since those APIs do not hold the lock between calls.
Future patches will remove those APIs, and change callers to
use this new API instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I71c7e8c1feb9112da8be32a8056b30e105e30463
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10655
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Future patches will remove some of the more complex conditions
between different configure flags. As a result duplicate entries
might be present in DPDK_LIB_LIST.
Just for tidiness of the DPDK linker args, the DPDK_LIB_LIST_SORTED
is added. Using sort function removes duplicate entries in the list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I318fd0cebbd30a80d281175b7d48bb3249abb841
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
This library was never used, remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5d0255f4b9ddbe98b349b4253f87e5332fe7057f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10526
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK supports only maintained LTS versions of DPDK.
For SPDK 22.01 this means DPDK 20.11 and 21.11.
This patch removes paths for earlier versions of DPDK.
There is no need to check if library is present for the following:
- rte_telemetry was added as rte_eal dependency in DPDK 20.05
- rte_kvargs was added as rte_eal dependency in DPDK 18.08
- rte_pmd_aesni_mb, rte_pmd_isal, rte_pmd_qat were removed in DPDK 20.11
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I30c4cdb0fe0634db50bc34d7d6c232806ff49960
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At this time raid5 bdev does not depend on rte_hash in any way.
Meanwhile NVMe-oF Fibre Channel transport does.
This patch reflects that in the mk file for env_dpdk.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2ba3e016337866f80fc7a6043cef87bf33cf2373
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit d9561c444f.
This patch is incorrectly iterating the CPU mask assuming it is
contiguous. However, rather than fix it, let's just let the kernel
scheduler place the thread where it thinks is best. It's going to prefer
idle cores anyway. So reverting is the simplest way forward.
Change-Id: I7b66cce7bfb6ddb108aa7576f508aa3b02b79138
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10475
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
PCI event module currently requires use of SO_RCVBUFFORCE socket option
which is restricted to CAP_NET_ADMIN. Retry with SO_RCVBUF for non-root
(unprivileged) processes where this capability is not available.
Return -ENOSPC if receive buffer is not of sufficient size.
Fixes issue #2224
Signed-off-by: Tom Nabarro <tom.nabarro@intel.com>
Change-Id: I0bed1b1eac0c7e8601d3d172d8027380ec8be391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Details of the changes here:
918fd2f146.
They mainly target the aesni_mb driver which was moved to ipsec_mb and
bump the minimal supported version of the ipsec to v1.0.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ica3b4fd66684751939159511845eb6ac6f7d5205
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
DPDK will report error when detaching the PCI device in secondary
process, because SPDK will return -1 in `pci_device_fini`, so
here we will reset the `attached` flag before that.
Also return the errno instead of -1.
Change-Id: I3efa4d97ceab504215faeb9d3d80a694bdd6014c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7944
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
This patch revert commit 8f7d9ec. In function vtophys_iommu_init(), we
can use `dev->drvier` in RTE_DEV_FOREACH() loop to count number of devices
probed by device driver using vfio APIs, or we will count all the PCI devices
that bind to vfio-pci driver, only the probed device's IOMMU group is added
to vfio container.
The original implementation is correct to count `g_vfio.device_ref` in
vtophys_pci_device_added(), we don't need to count it in
vtophys_iommu_device_event() callback.
Fix issue #2086.
Change-Id: Ib1502a67960a49e9a2f93823cc8ceab2e8303134
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9236
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
