pthread_join() expect pointer to 'void *' which is 8 byte long but gets
pointer to 'int' which is 4 byte long.
Bug introduced in:
e6c30818e3 ("test: don't use bdev_svc application in this test")
Fixes#533
Change-Id: Icaa35c5acec5ad9aebfb92e05b113c4275624db4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/436309
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is for ABORT TASK SET and LUN RESET.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: Idabf4931d751ee698e9809eafd5c151b979f048b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By up to the previous patch in the patch series, unexpected behavior
due to write tasks in task management commands have been fixed.
But unexpected behavior due to read tasks in task management commands
have been still observed.
Remaining patches in the patch series will fix the unexpected behavior
due to read tasks in task management commands.
This patch is for ABORT TASK.
ABORT TASK is not supported in SCSI layer yet. But the initiator
doesn't care about the failure is due to not-supported or failure.
It must be avoided that the task management command returns SCSI Good
but some tasks are not aborted and return SCSI Good later. On the other
hand, it is acceptable that the task management command returns
failure but some tasks are partially aborted.
Hence this patch adds operation without checking the support status
in SCSI layer.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: I030a8b2f19c2f7c7d2f7b0b2c633579534db631b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By subsequent patches for iSCSI, spdk_scsi_dev_queue_mgmt_task()
will not be called directly from the function that knows TMF code,
and currently setting TMF code to SCSI task is done in
spdk_scsi_dev_queue_mgmt_task().
Hence after subsequent patches for iSCSI, to hand off TMF code to
SCSI task, any dynamic context will be required.
To avoid the dynamic context, extract setting TMF code from
spdk_scsi_dev_queue_mgmt_task() and put appropriate place for
each call of spdk_scsi_dev_queue_mgmt_task().
Additionally, in spdk_abort_transfer_task_in_task_mgmt_resp(),
ref_task_tag is got from PDU but getting it from SCSI task is
much easier. Hence get ref_task_tag from SCSI task in the callback.
Change-Id: I7add9290598d2df7cfcf1506ec75d74c70c0f236
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch tests the following:
- Reset task will not complete until prior IO tasks complete.
- IO tasks will suspend until prior reset tasks complete.
Change-Id: I8ae27874e7eb34f866bbd4e057ee5d8c27d040e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/435433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IO submissions to backends have to complete first in LUN reset.
Previous patch makes the waiting time limited.
LUN reset don't use timeout for now because even if LUN reset reports
timeout, error handling of the initiator will be escalated and the
initiator will issue stronger command and will wait eventually
until all outstanding tasks completed.
Besides, not using timeout in LUN reset will make implementation simple.
If timeout becomes necessary, I'll do it in the separate patch later.
Change-Id: Ie9e4502068c19b1727ea65dc773ddf08cedec7c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission queue deleted by https://review.gerrithub.io/393911
is necessary to support proper LUN reset.
Hence revert the removal in this patch.
And using the submission queue, suspend IO task submission during
LUN reset to limit completion time of LUN reset.
Change-Id: I3cdc4f0165fe845637112c2900407d6b4a09df79
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Task management functions don't require performance. Serializing
execution of task managment functions will sipmlify and stabilize
the logic and will be helpful for upcoming patches to support
other task management functions.
This patch introduces two queues, pending and submitted queue,
and serializes LUN reset exection and makes LUN hot removal
wait for LUN reset.
Besides, checking if LUN is NULL is moved to the upper layer as
same as IO task submission.
Change-Id: Ia0cf3f437a745ee70fc9b17744cc63c833690dda
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Having unlimited size core dumps is not a good idea on a lot of
machines. Modify it to 5GB.
Change-Id: I1d52bfa9f2450e2d8f824c3b86aa2ad5fe4579c3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use nvmf_tgt for nvmf tests.
Use iscsi_tgt for spdkcli iscsi tests.
Use vhost target for spdkcli vhost tests.
Fixes#511.
Change-Id: I5f084bccf87d32b0ede210c62ccc4a2f7926d716
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435139
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a more difficult case to handle than killing with I/O
outstanding because the target gets no notification that the
connection went away. Effectively, this tests that keep alive
is working correctly.
Change-Id: I5bccea8bc51de6d1d2d40c2648ad7c40cce2c281
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433360
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I2ec68f20ba209f02ee5c2de4b6fe5330a4bc0853
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: Ia92bd8f4525712bd27ade16ead67435c5e0fbe7a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I7558590e41e5c580a130a6aba7ae4f7dcff58da8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently, SPDK can support bandwidth limiting. So add bandwidth
test cases into the qos.sh.
Change-Id: I85930506b296d6a94bd7dbb101a34ef804cd100e
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/432141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch enables non blocking mode in RPC client. Requests are send
and received during spdk_jsonrpc_client_poll.
Change-Id: I5089737b2407055d3eeddb5e2ab0946d74e43c6a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/430095
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pass many spdkcli commands to spdkcli_job.py
Change-Id: I0cf5840fdf7183febff1872c7fc8d1cb303a06f1
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the next patch.
Change-Id: Ia7af66ba129a4666730f94be64d3699cded65e09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As described in RFC3720, task management request will act on all
the commands from the same session having a CmdSN lower than the
task management CmdSN.
Current implementation clears all R2T tasks without checking CmdSN.
This patch changes the implementation to clear only R2T tasks
whose CmdSN is smaller than the task management request.
Additionally this patch adds to UT code to verify the change works
as expected.
Change-Id: I0b368cb13741bc05259924d27793438e9250b951
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For tests that aren't specifically testing the thread API,
leverage the ut_multithread framework to simplify them.
Change-Id: Ib772ac4ebd3179b71a51697edc50ad9b7b70536b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allows us to run them independent from autotest
Change-Id: I59843fb3e089494be32fd7aa47cad5439f2732c0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There appear to be issues around using dynamic memory allocation with
secondary processes and local NVMe drives. This change allows us to keep
running the NVMe-oF physical tests while we debug the root cause of the
issue.
Change-Id: I2fdbac9878c3e19e6ef0bcef1aa301b7062dc0bf
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a test with a hooked PCI device that redirects
all PCI config reads and writes to a local buffer.
Change-Id: I86fb847a50a3d33ab20dcb1a8158a76e68843f6e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libpmem only allows passing a size when CREATE flag
is set.
This requires some updates in the unit test stubs
for pmem_map_file as well. While here, do some
additional cleanup and add a g_volatile_pm_buf_len to
track the size of the allocated volatile pm buffer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib9fe58fd9946161dd20bb8391be2e9680705ab22
Reviewed-on: https://review.gerrithub.io/435945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Python3 Exception don't have 'message' attribute so need to add it in
RpcException class.
This attribute has beed dropped in pep-0352. We should switch to str(e)
instead in other places too.
Change-Id: I610696b9e374e11ffa95327af6a10c6874915022
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/435506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Apparently there's a data race with the setup.sh script,
that may unbind the PCI device before the mount is visible.
Change-Id: I71a349a10a74e29405e3537c513f284acfbd39fb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In case the process we are waiting for fail to start
listening on RPC socket the test script will stuck till the build times
out. Fix this by adding 20s timeout and 0.5s sleep in the while
loop.
For systems where there is no ip command and netstat output is missing
'Status' column for Unix sockets (like FreeBSD) call the get_rpc_methods
RPC command to check if process is listening.
Change-Id: Ia8b06af7875b65a7fd8be65cf55e92881f6f95db
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/433102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are too verbose in many places. Some scripts don't want to be traced
all the way, instad they enable tracing only for some parts and
autotest_common.sh just do 'set -x' in many places.
This patch save 'x' flag on function enter and restore it at exit.
Change-Id: I39b3d3dd3f711e1131e476f9d322d9e1b097ad12
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/432604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Includes tests for the parse_sgl function.
Change-Id: I83a854598c7320b31b75a4fa5ebbfe66cb708b6d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429070
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This makes it correctly wait until the bdevperf test has started
running prior to starting the sleep to allow I/O to begin.
Change-Id: Ia6c004ede1854e836479dd3a0707a91551f954bc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433359
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be the logical block size presented by the
compressed volume to differ from the backing device's
block size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4ef06e131d8e101a0c9ced228c56a02fcbfb7af
Reviewed-on: https://review.gerrithub.io/434113
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will keep the RPCs for now but mark them deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0407dcb392ea0c9e89c0f26cd5670aed2dbfadef
Reviewed-on: https://review.gerrithub.io/435345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90e7d698cae7577736319e38f089e3b759c9beef
Reviewed-on: https://review.gerrithub.io/435343
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"trace" is for event tracing. SPDK used to use this
term for logging - we've moved some APIs to use "log"
but more needs to be changed. So start that now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib732c57d01602e56f37e9deed7135840a7c005be
Reviewed-on: https://review.gerrithub.io/435342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Not all bdevs have uuid attribute.
Fixes#510.
Change-Id: Ie3055563c8b88c002b5af45eb528ffbef5ec2166
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
1. Use the Raid-0 bdev which based two Malloc bdevs to run
the fio test.
2. Use the Raid-0 bdev which based one Nvme bdev and one
malloc bdev to run fio test.
3. Creating lvol store on device Raid-0 which is based on
two Malloc bdevs.
Change-Id: I3fb5e5d8e445a236a6a4e8c198a6f54a1f488989
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/425546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We assumed spdk_mem_map_translate() translates only 2MB-aligned
addresses, but that's not true. Both vtophys and NVMf can use it
with any user-provided address and that breaks our contiguous memory
length calculations. Right now each buffer appeared to have the
first n * 2MB of memory always contiguous.
This is a bugfix for NVMf which does check the mapping length
internally. It will also become handy when adding the similar
functionality to spdk_vtophys().
Change-Id: I3bc8e0b2b8d203cb90320a79264effb7ea7037a7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/433076
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
NVMf target can't support extended LBA format for now, so print a
error log for those NVMe backend devices with extended LBA format.
Fix the issue #497.
Change-Id: Idda76ba934dd0eb45f92ae22b0b71398b3ae69dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/432799
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Considering it's the part base object that's now accessible
in its remove callback, we can simplify the part API by making
it accept the part base object directly.
Change-Id: I87c3278929a063c115828d02e0def7fa536e6682
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/434835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Application Makefiles can now just add xx_MODULES_LIB_LIST
to SPDK_LIB_LIST. This is possible now since all
SPDK libraries are linked with --whole-archive, so there
is no need to differentiate between "modules" libraries
and other SPDK libraries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iabf81a388b72d3b2a2f48287a8491ddc977722ac
Reviewed-on: https://review.gerrithub.io/434277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
