Like other test, need to add SPDK_CU_ASSERT_FATAL(TAILQ_EMPTY(&g_bdev_io_queue)).
To avoid issue:
scsi_bdev_ut.c:956:2: warning: Address of stack memory associated with local
variable 'task' is still referred to by the global variable 'g_io_wait_queue'
upon returning to the caller. This will be a dangling reference
ut_put_task(&task);
^~~~~~~~~~~~~~~~~~
waiting exit from while loop in ut_bdev_io_flush.
This is related to issue #822.
Change-Id: If390f5076582a0149646f0c2a408c3bcd3b4fab6
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459534
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This isn't needed, and it actually results in warnings
when linking with LTO enabled.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e7dcd5d3f738fb3e53e35a1fff154a0e1ab06d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
All the SCSI commands have two states: allowed and conflict,
based on different reservation types and I_T nexus, the SCSI
module will check each commands before sending to the backend
device.
Change-Id: Ib05cece1c237873360f85c68d139362200d2d47e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To establish a persistent reservation the application client shall first
register an I_T nexus with the device server. An application client registers
with a logical unit by issuing a PERSISTENT RESERVE OUT command with REGISTER
service action or REGISTER AND IGNORE EXISTING KEY service action.
Specify Initiator Ports (SPEC_I_PT) bit and All Target Ports (ALL_TG_PT) bit
are not supported for now, the registrants belong to the I_T nexus who sends
the command.
Also Activate Persist Through Power Loss (APTPL) bit will be supported in
following patches.
Change-Id: If057a764a4bfa73017f98048c94b697dbfa4b4a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the end of the patch series. After this patch,
delete_target_node RPC will wait for the completion of
removal of the SCSI device and then free the iSCSI target.
SCSI device holds passed callback and calls it in free_dev().
free_dev() is ensured to be called after all iSCSI sessions
are closed. So iSCSI target resource can be freed safely
after that.
Change-Id: I25921b4014207092b7b3845dfeae58bcdffa2edc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
Change-Id: Ib964a41ec22757f2a09cea22f398903f78d0781f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
About conversion from bytes to blocks, we don't expose bdev API
spdk_bdev_bytes_to_blocks and but create private helper function
_bytes_to_blocks because we will use not block size but data
block size when we support transparent DIF feature.
Change-Id: I37169c673479c92e027e2507a0e54a1e414b43e1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Also remove some unneeded stubs since the thread
library is linked by default to all unit tests.
Note that the lun.c unit tests include test_env via
the new include of ut_multithread.c. It needs ut_multithread
to simplify allocation of threads needed so that the lun.c
code can safely register pollers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I922b5fed12ff7e2802b19d7f953c1b2352800f73
Reviewed-on: https://review.gerrithub.io/c/432919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
mk/spdk.unittest.mk already includes mk/spdk.common.mk, so it's
not needed. This also fixes an issue where touching an included
.mk file would not trigger unit tests to rebuild if they had
this duplicated mk/spdk.common.mk include.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I41a04eb77ce468849cb9b53bd1f76df6fec06e46
Reviewed-on: https://review.gerrithub.io/c/443980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is the callback type used for message passing. The
old name is easy to confuse with the callback to pass
a message to a thread or the upcoming callback to
spawn a thread.
Change-Id: I5fd63b57c4be2a4262a197850e6de4901be03ee7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk.unittest.mk includes spdk.app.mk, but some unit test
Makefiles include both spdk.unittest.mk and spdk.app.mk,
meaning spdk.app.mk gets included twice. Fix that.
This hasn't been an issue because spdk.app.mk currently
only includes variables - but no rules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d39e8084f79442fb06ae9b5a6a68d6134adff4
Reviewed-on: https://review.gerrithub.io/434281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By subsequent patches for iSCSI, spdk_scsi_dev_queue_mgmt_task()
will not be called directly from the function that knows TMF code,
and currently setting TMF code to SCSI task is done in
spdk_scsi_dev_queue_mgmt_task().
Hence after subsequent patches for iSCSI, to hand off TMF code to
SCSI task, any dynamic context will be required.
To avoid the dynamic context, extract setting TMF code from
spdk_scsi_dev_queue_mgmt_task() and put appropriate place for
each call of spdk_scsi_dev_queue_mgmt_task().
Additionally, in spdk_abort_transfer_task_in_task_mgmt_resp(),
ref_task_tag is got from PDU but getting it from SCSI task is
much easier. Hence get ref_task_tag from SCSI task in the callback.
Change-Id: I7add9290598d2df7cfcf1506ec75d74c70c0f236
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch tests the following:
- Reset task will not complete until prior IO tasks complete.
- IO tasks will suspend until prior reset tasks complete.
Change-Id: I8ae27874e7eb34f866bbd4e057ee5d8c27d040e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/435433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IO submissions to backends have to complete first in LUN reset.
Previous patch makes the waiting time limited.
LUN reset don't use timeout for now because even if LUN reset reports
timeout, error handling of the initiator will be escalated and the
initiator will issue stronger command and will wait eventually
until all outstanding tasks completed.
Besides, not using timeout in LUN reset will make implementation simple.
If timeout becomes necessary, I'll do it in the separate patch later.
Change-Id: Ie9e4502068c19b1727ea65dc773ddf08cedec7c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission queue deleted by https://review.gerrithub.io/393911
is necessary to support proper LUN reset.
Hence revert the removal in this patch.
And using the submission queue, suspend IO task submission during
LUN reset to limit completion time of LUN reset.
Change-Id: I3cdc4f0165fe845637112c2900407d6b4a09df79
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Task management functions don't require performance. Serializing
execution of task managment functions will sipmlify and stabilize
the logic and will be helpful for upcoming patches to support
other task management functions.
This patch introduces two queues, pending and submitted queue,
and serializes LUN reset exection and makes LUN hot removal
wait for LUN reset.
Besides, checking if LUN is NULL is moved to the upper layer as
same as IO task submission.
Change-Id: Ia0cf3f437a745ee70fc9b17744cc63c833690dda
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the next patch.
Change-Id: Ia7af66ba129a4666730f94be64d3699cded65e09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a variant of spdk_trace_record which takes a tsc
parameter. This allows callers who already have the
current tsc to pass it in as a parameter, saving an extra
rdtsc in the trace library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I074f4f9fdbe649ad6717f932982a574bc61f2997
Reviewed-on: https://review.gerrithub.io/424277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reduces overhead of spdk_trace_record calls when
tracing is not enabled.
While here, remove a couple of unit test stubs for
spdk_trace_record that weren't needed anymore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2cbb91e7d3311d95444d663f466d846676d2dcce
Reviewed-on: https://review.gerrithub.io/424276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I had to make small modifications to one test in the dev_ut.c file to
prevent a memory leak error. However, changing the index in this test
from -1 to 0 has no effect on the coverage.
Change-Id: Ia8a475aaa41118f072a5d9006bab9d9c84b4a10a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424126
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use a descriptor got by opening the LUN to allocate IO channel of the LUN.
This requires opening the LUN is done before allocating IO channel of the
LUN.
Use the descriptor to free IO channel of the LUN too.
Additionally, assert is added to the close LUN function to check if
IO channel is freed before the last close LUN function is called.
Change-Id: Iafb2f9ce790fff25801ea45b3286f3e26943807b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to scsi bdev.
Change-Id: Ia6a5be871ae09a4d1166991925f0a44f3b355bdd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI reset function return code is not used,
so there is no need for it to have return code.
Change-Id: Ib647109c75b1546675d2601fa00004e1ef186024
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds UT for IO operations, as preparation for
next patch in series handling bdev_io buffer exhaustion.
Change-Id: I139cb8811453576efd1acddd15ad2a3672995f09
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417452
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously when IO was sent to bdev, even without callback yet,
status for task was set to SPDK_SCSI_STATUS_GOOD.
This patch changes it so that it is only set when callback actually
comesback from bdev via spdk_bdev_io_get_scsi_status().
Change-Id: I4a36ec345608257123e1036d31540f5f1090a23b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There was a plan a long time ago to try to output all
unit test results in JSON format for post-processing.
It is used by only one unit test file currently, but the
results aren't used and there are no plans to use it in
the future or extend it to other unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I72c409090bbd7b8fa7ec307bbc97f97ccf2e397c
Reviewed-on: https://review.gerrithub.io/418112
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Originally task was memset to 0, meaning that some asserts might have
incorrectly asserted values that were set to 0 beforehand.
Now ut_init_task() sets task to 0xFF, with only couple required fields set to
appropriate values.
Change-Id: I47fbb03daf6ab7cbf60abc58f63315a151e49890
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417686
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Callbacks were never called in UT for scsi_bdev.
Change-Id: I54a9d75af3161cd4dd4f0c153c7808b13e818576
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417551
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To make it clear that spdk_put_task() and spdk_init_task()
are not part of public API, chaged prefix to ut_.
Change-Id: I76a6efc3835f0ee71953029cad1dabf5a68013a4
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417685
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_bdev_read() bdev function is not used
in scsi library. No need to stub it.
Change-Id: I7c142c59c5e64ae9ecfabaf0c73a9b0e68fffd04
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417550
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the status field into the internal structure.
Change-Id: Icf96436925dd829ee89d2491ef55e337823be6fb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/416057
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change the checks to asserts instead. No callers ever
checked the return codes, and if they did, there's
nothing they can do to recover from an error status.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96d6804d61dfbf6030b3cc78ea59981301417421
Reviewed-on: https://review.gerrithub.io/415539
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch does a little cleanup of SPDK SCSI layer APIs.
spdk_scsi_task_alloc_data() is only used in spdk_scsi_task_scatter_data().
spck_scsi_task_free_data() is only used in spdk_scsi_task_put().
The latter was called in UT code but this can be removed without any
degradation.
SPDK SCSI layer is relatively matured and these will not be used
out of lib/scsi/task.c.
Additionally memory leak detected by ASAN is fixed in this patch.
Change-Id: I8eff7b4dbfc307c211087734649a9b9b10555f8d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/413872
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of silently truncating overly-long SCSI dev names, add an
explicit check and return an error if the name is too long.
Since we now calculate the length of name up front, this also allows
simplification of the copy into dev->name.
This also ensures that dev->name will always be zero-terminated, so we
can simplify the strnlen() in spdk_bdev_scsi_pad_scsi_name() to a
strlen() and remove the invalid unit test case for padding names longer
than SPDK_SCSI_DEV_MAX_NAME.
Change-Id: I54de00bac062a142a10c41cfa2aec19d7969dff0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406990
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5ec4b2e1421a1b0ba5ad005d5376a1a556ea4d7b
Reviewed-on: https://review.gerrithub.io/399749
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These broke due to a conflicting merge that wasn't
found until both were committed to master.
Fixes 3b3c6002c9.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0fc045a1e5d46cc42e5b4ec985bf1ade4417d85
Reviewed-on: https://review.gerrithub.io/395173
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removing an LUN from an existing iSCSI target is possible by
removing the corresponding BDEV. However adding an LUN to an
existing iSCSI target is not possible yet.
Add a new function spdk_iscsi_tgt_node_add_lun() and related
functions first toward supporting this function.
JSON-RPC for this operation will be submitted an another patch.
Informing the newly added LUN to the initiator is not included
in this patch. Hence this operation is possible only for any
inactive target.
Change-Id: I3a28f4d75a17126e49c9d12ce64c3ad68f231840
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385180
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
