For a lot of the tests, we may want to specify different options for
each transport. I believe this will be more prevalent as we add more
transport specific options.
Change-Id: I83a915629460d1d869eaba4bc86822d7563402ac
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When possible we should make sure that no silent failures or
skipped tests.
Since some of the tests use fio, autotest should fail
in those places when it is missing.
Change-Id: I97581e2df30a02445b560e3b88d03ce92986d0fd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456316
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's always set in autotest_common.sh, there's no need
to set it again in each test script.
Change-Id: Ib14c4189c553dad54a3065c1a1d413a5fc5a5347
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds functions in autotest_common.sh,
fio_bdev() and fio_nvme() for their respective plugins.
It simplifies its usage throughout the scripts.
Additionally will help with expanding the fio cmd
line with nessecary changes only in single place.
This will be used in next patch in series to
LD_PRELOAD ASAN before fio_plugin.
Note: Did not implement changes for perf scripts,
since they are usualy run separately and didn't want
to affect those.
Similarly didn't change vhost initiator tests,
because the exported directories do not work for
inside the VM. Will need to think of a way to change it
there as well.
Change-Id: Idf750ee7aa9d5e30efc0ce430d15fa45ceccb203
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456314
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This prepares for using scripts for tcp testing as well.
Note that this patch just hardcoded TEST_TRANSPORT to
'rdma' for now. An upcoming patch will require the
caller to pass --transport=rdma instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I085fdf51910aaf960959c71c73a187be41fd7ee8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A lot of places were still hardcoding 4420 directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iff8a549addeb05e441fe3b035a84a0f8a6bf2205
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456666
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Good suggestion from Darek - let's just always
parse common script args from autotest_common.sh.
These arguments follow common arg naming conventions
(i.e. --iso) so there's no harm just doing this for
any test that sources autotest_common.sh. This has
the nice effect of not requiring scripts to
explicitly call this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id89b68c22557a5a771be407873d0e57843f0d05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455552
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
iscsi test scripts can now take two arguments -
"iso" and then the sock type (posix or vpp). They
need to be in that specific order too. nvmf test
scripts also support "iso" and we want to add
the transport type (rdma or tcp) as well. Even further
out, we may want to use a sock type for nvmf, i.e.
tcp transport with vpp.
We also have the iscsi_tgt fio_remove_nvme.sh test
that does both iscsi and nvmf.
So to make this all work a bit nicer, add a new
function called parse_common_script_args that
will take the command line arguments to a script
and set the appropriate variables, including defaults
when a specific parameter isn't specified. We will
use getopt-like behavior for this also, instead of
enforcing a specific parameter order. Then a script
could be called like this:
test/nvmf/target/shutdown.sh --iso --transport=tcp --sock=vpp
Individual test scripts then just need to do this
after sourcing autotest_common.sh:
parse_common_script_args $@
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb8d7666384991482a2d425e26ffa7525b9ac15a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's a bug in Linux 5.1 (possibly 5.0 too) where
the kernel initiator driver crashes if it can't get
one queue per CPU. This will get fixed eventually,
but for now we need to remove the cases where we
restrict the number of queues per controller so that
we can test on newer kernels.
Even on cases where we're testing the SPDK initiator,
there's no real need to restrict the number of queue
pairs.
The kernel will eventually get fixed, but we should
be testing with default behavior anyways (the kernel
wants lots of queues). We'll also want to add some
regression tests to make sure the kernel doesn't
break again. But that will all come later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9979e6d94456e075688b822b042936b63e518a4a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nested lvolstores take a very long time to create,
since the initial unmap will get broken into
one unmap per cluster for the underlying lvol.
This test is working fine in the test pool, but they
have much smaller SSDs. My system has a 3.7TB SSD,
and this test times out.
So don't bother clearing the nested lvol store - this
saves unmap operations. We still have unmap operations
when deleting the nested lvol, so increase the cluster
size for the main lvolstore to 1GiB to reduce the total
number of unmap operations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29a254fff443e963cd620b55e78092d6a96f8ddd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
All of the checking for NVMF_FIRST_TARGET_IP, starting
the target, waiting on the target and modprobing
nvme-rdma is duplicated in every script. So move
a lot of this either to nvmftestinit() or a new
nvmfappstart() function in common.sh.
Also just kill the nvmf target in nvmftestfini, rather
than the script to explicitly kill it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5864404610a4244473f460d48264de92687ed867
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454678
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Pull this parameter when sourcing common.sh
and set a RUN_IN_ISOLATION flag if it was specified.
This reduces the overall code a bit plus avoids having to
pass the "iso" parameter to nvmftestinit and nvmftestfini.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idbbe27bfb7b62857500176cdb5d90e381fce4ffc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454814
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
get_lvs_free_mb only takes a UUID argument, not
a friendly name. So revert that part of the changes
to this script made previously.
Also fix ordering of nested lvolstore and lvol names.
This fixes last night's nightly test failures for
nvmf.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I408ed787b6ff43314dd432c9fa7d9f5882c3d071
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453007
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't need to use the UUIDs for lvolstores and
lvols in the nightly test - just use the names that
we've specified.
Also remove the bdev loops - there's only one namespace
per subsystem.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I684b72ca4472009dd8bc49f5221a7937769f1ab8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
FIO is going to always present a contiguous buffer to us. But we can
fake out the nvme driver with a couple of global variables.
Change-Id: I038e70582043e1d7c1800ed065fe126aa091c290
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allows us to run them independent from autotest
Change-Id: I59843fb3e089494be32fd7aa47cad5439f2732c0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435937
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvmf_create_transport can be run both before and after the subsystems
have been initialized. Therefore, we don't need the --wait-for-rpc
argument in most cases. This eliminates the need for calling
start_subsystem_init.
Change-Id: I35560fb968159b4796b1022b1de9cca4dfc5feeb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429983
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When running these tests, we want to set the transport opts, not
necessarily the target opts. This will also open us up to doing broader
tests in the future against different transports.
Change-Id: I73112f82c371592456c65355f53f7970878a59c3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429049
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use nvmf_subsystem_create instead.
Change-Id: Idcfa6526ef47e2839f69acd5d7dc08e65e5150b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/425187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This it to prepare for RPM package. Also lower number of dependencies
needed by SPDK tools.
Update changelog to deprecate Python 2 and explicit interpeter invoking
in scripts.
Change-Id: I2497cca721cbcbadc1c99c675f8b8b7f682d5efa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable tracepoints and move shm file to
the output directory in case of crash.
Cleanup all shm files after successful run.
Change-Id: Ie46c86ddda71015038624f9b2b5fd4a3e1d7f61f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/425078
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--wait-for-rpc can be used instead.
This parameter will eventually become obsolete,
so let's remove the short version. It will be
exclusively used for "workload" in perf apps.
Change-Id: Ib4b7001d0e756349b05788278c894d622bc89790
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for NVMe bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib9a0475d735af2616a3005d04530ca825ece8a52
Reviewed-on: https://review.gerrithub.io/416546
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the first step toward fixing the behavior of the lvol bdev
module so that it handles spdk_bdev_unregister() correctly.
Currently, when an lvol bdev is unregistered, this causes the associated
lvol to be deleted; this isn't the desired behavior, since
spdk_bdev_unregister() is just meant to drop the currently-exposed bdev,
as in a hot-unplug event, not destroy the backing storage.
The current implementation of the new destroy_lvol_bdev method still
calls into the exsting (broken) spdk_bdev_unregister() path, but this at
least lets us fix the existing delete_bdev RPC callers that really
intended to destroy the lvol.
The next step is to make vbdev_lvol_destroy() call spdk_lvol_destroy()
instead of unregistering the bdev, which will require cleanup in the
generic lvol layer to remove the close_only flag.
Change-Id: Ic4cb51305d31f6d7366a82ba7bf7b19ebbcd3e9c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/408084
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To cover fio_plugin as host with nvmf lvol backend.
Change-Id: I5c602d95421f1ab6d2dde660c1833c953c2e5c75
Signed-off-by: wenzhong wu <wenzhongx.wu@intel.com>
Reviewed-on: https://review.gerrithub.io/390381
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous behavior with an empty host NQN whitelist was to allow any
host to connect.
Change-Id: I5401e52d96642cf20afe0d50c692613e67262edf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376432
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the first in a series of patches to remove network configuration assumptions from the NVMF test suite.
Change-Id: I9d8a9daab6910c5e80276db7e6701e1aa8e1d38f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/371193
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is now only virtual mode. Virtual mode has been
improved enough to reach feature parity with direct
mode and performance benchmarks show no degradation.
Simplify the code by always using virtual mode.
Change-Id: Id5cdb5d4d8c54e661b245ed7250c2f9d66ca2152
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/369496
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use "trtype" to represent transport types in nvmf_tgt RPCs for
consistency with the NVMe-oF spec and other SPDK RPCs.
The current "transport" names are still supported for compatibility with
existing RPC users.
Change-Id: Ib03dda384dc01a41a18c06c56baff16b82d36c00
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/367422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
fio has a race between reap_threads() and free_ioengine(). free_ioengine()
will call the ioengine's cleanup routine and then dlclose it if it
is dynamically linked (like the spdk fio plugin). free_ioengine() does
not set td->io_ops = NULL though until after dlclose() is complete. If
reap_threads() tries to dereference td->io_ops after our plugin has been
closed but before io_ops was set to NULL, it will segfault.
Solution (until an upstream fio fix is available) is to use LD_PRELOAD
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ide4eb3cb92a636513289107fc211fdf1f98b616f
Reviewed-on: https://review.gerrithub.io/365272
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
The stub application will ensure that each
nvmf test does not need to reinitialized DPDK
memory and NVMe devices. This drastically
cuts down on the amount of time needed to run
all of the nvmf tests.
Change-Id: I6abad4e1298111884f18026e72e36f5d8b73c4b9
Signed-off-by: cunyinch <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/362810
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also adds the automation test case for using remote
NVMe devices exported by NVMe-oF target.
Change-Id: I2b839a4eeec33d5b0c30d654e6013ad8c7949e23
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
