As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve handling of partial IOs for case when iovcnt == 1.
This case is pretty frqeuent because all data allocated by OCF
have iovcnt == 1 (see ctx->data->alloc() or vbdev_ocf_ctx_data_alloc())
Change-Id: I8d38ca9e9d2bd3e6ce298bf788ce6ed782b56594
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes submission of partial IOs in bottom adapter
Existing check (if offset > 0) was not sufficient to detect partial IOs
because there could be an IO with offset = 0 but length < total size of iovs.
This patch changes the check, but also free operation on completion
because now the old free does not cover all situations when we allocate iovs.
`Partial IOs` are the IOs handled by bottom adapter
which specify only part of the internal iovs vector.
So their length is less that the length of internal iovs vector.
They exist because sometimes parts of single IO from top adapter
need to be sent to different locations.
Also, in general, IOs initiated by OCF (such as cleaner IOs) are represented
as single big iov that is submitted by parts in form of 'Partial IOs'.
Change-Id: I8ae47659fb34904c593a696d74d683a418ac9962
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement metadata probe functionality to load cache state
from disk.
During metadata probe, we inspect UUIDs of core devices
and create vbdev configurations based on them.
Then, to start vbdev, we use load path (loadq = true).
After this change persistent metadata is officially supported,
we can save and restore cache state from persistant storage.
WriteBack mode is now safe to use in respect to unexpected shutdowns,
because all information about dirty data is also restored during cache load.
Change-Id: I6cf86aabd68177b88638a68ea6a5b78a1068a4d0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455417
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates submodule and appropriate functions.
Cleaner poller is now registered only when needed.
Change-Id: Ic4ca7ce6f77b71ac12c19462f62ae7cd96c59006
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Interpret volume->open() options as our vbdev_ocf_base struct.
This is used during metadata probe procedure, when there is no
vbdev configurations created, so we need to pass base structure
as option.
This patch is a prepartion for persistant metadata support,
and it does not change current behavior.
Change-Id: I0b7435df1692d8b3028931c6c9fc50d2d84b2557
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use OCF per-volume UUID field to serialize bdev names.
This is going to be used during cache load to find out
which bdevs we want to attach.
Note that there is in fact "user_metadata" buffor that is
also stored in cache metadata, but we cannot use it
because its size is limited to 64 bytes.
UUID in OCF terms is not standarized
and is meant to be used to store custom immutable data.
This change preparation for persistent metadata support.
Functionality is not changed. (everything works the same way)
Change-Id: Ia9204fae29106f5b816d93a6771425a223d6c028
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455414
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change shutdown behavior such that now first bdev destruct() call
stops OCF cache instance.
Previusly, cache was stopped when single vbdev was referencing it.
This patch is related to persistent metadata support.
Without this change, every time a SPDK application is stopped,
only the last core is remembered in metadata,
because vbdevs detach by 1 by 1, each time updating the metadata.
Change-Id: I57db3f77db525177c024ee85e660a85aff2f8c31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fix instance function for OCF ctx interface.
This function is used for persistent metadata only.
Change-Id: I9583ea8eb21f07a3e9072a9552bed1c077cb7114
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Make init_vbdev() accept NULL as cache_mode if loadq flag
is set.
This is needed for load path because we don't know cache mode
before the actual load (happens later).
This change is related to persistant metadata support.
This patch does not change current behavior because loadq flag
is always false.
Change-Id: I42727eb841d87903c81bd5e6d51b6d4869ed9be3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455411
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement load path for OCF cache.
During load OCF will read metadata from cache disk and restore its state.
management_channel initialization is moved before cache load/attach part
because ocf_mngt_cache_load() needs it to read metadata.
This patch is a preparation for persistant metadata support.
Load path is never used yet because loadq flag is always false.
Change-Id: Iff6c1c52eae7b9f52812a8bd3d5ae6d6facedd60
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455410
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new loadq flag that indicates if vbdev
should load cache instance from disk or start a new one.
This change is a preparation for persistent metadata support.
Functionality is not changed in this patch as the loadq flag is always false.
Change-Id: I1baac7f988e6eeadb4f365ba7bfab8019d55a753
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455409
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Do management flush during OCF shutdown to write all dirty requests to cores.
Dirty requests are relevant to WriteBack mode only.
Change-Id: I778a73ed8ab5659921f192f638027d513c239814
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Implement cleaner that is used in WriteBack mode.
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~20 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
WriteBack mode is fully functional after this change,
but persistent metadata support is required to use it for production.
Cleaner will run on management thread for now.
We plan to implement functionality of
chosing a CPU core where cleaner should run.
Cleaning policy is not configurable yet.
The default is ALRU with 20 sec interval.
Change-Id: I35aa7e00c44e0d7a77e64e60df1f66f20be03f55
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create new management channel and handle sharing between vbdevs.
This channel is going to be used for management operations
that produce IOs (such as flush) and also for cleaner.
Change-Id: Ieeed8454a7ab7459c86ac06ec6c0ece038bc928e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455272
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement management queue for asynchronous management that is provided
in new OCF API. This is a neccessery step to be able to implement
metadata support.
OCF submodule was updated to get management queue functionality
It has to be done in this patch because OCF module will not work
otherwise.
Change-Id: Id19c2e5bd6a5d26fee41752b62720e408dc082e8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448619
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
OCF queue list needs to be managed synchronously.
This patch uses our own mutex to achieve that because we cannot rely on
ocf_mngt_cache_lock() as it may produce deadlocks when using
cleaner.
Alternative way would be to use trylock, but
we need to register a poller for it and do locking concurently
which doesn't seem to be possible in callbacks of io channel.
We agreed with OCF team that we are going to change this part
when OCF will deliver safe ocf_mngt_cache_lock() function.
This patch fixes a very rare failure on our CI that looked like this:
```
04:33:02 vbdev_ocf.c: 134:stop_vbdev: *NOTICE*: Not stopping cache instance 'Malloc0' because it is referenced by other OCF bdev
04:33:03 MalCache1: Core core2 successfully removed
04:33:03 MalCache1: Stopping cache
04:33:03 MalCache1: Done saving cache state!
04:33:03 src/ocf/mngt/ocf_mngt_cache.c:1576:2: runtime error: pointer index expression with base 0x000000000000 overflowed to 0xffffffffffffffa8
04:33:03 #0 0x7f3c52d54c26 in _ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1576
04:33:03 #1 0x7f3c52d5579f in ocf_mngt_cache_stop src/ocf/mngt/ocf_mngt_cache.c:1657
04:33:03 #2 0x7f3c52cbe9f4 in stop_vbdev /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:147
04:33:03 #3 0x7f3c52cbf4a0 in vbdev_ocf_destruct /var/jenkins/workspace/NVMe_tests/nvme_phy_autotest/spdk/lib/bdev/ocf/vbdev_ocf.c:216
```
Change-Id: Id6fafb444958f3becdc480e44762074c6c081e1f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450682
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Introduce cache context structure that is going to be used
for sharing per cache info. For example: management queue,
cleaner_channel, cleaner_thread.
Lifetime of this structure ends with last vbdev that gets unregistered
and NOT when cache stops because cache does not have to be freed
there.
Change-Id: I66252084d7efda92edd10fb737c8e9c8169b4f6d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451403
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adapt to new async API which was changed recently
This is a neccessery step to be able to implement persistent metadata support
OCF submodule was updated to get new API
Change-Id: I6bf9941ab0557981235c5be27686594a1b8ac3a0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move last step of register chain to the top because it is arguably more readable.
This should not be done in previus patch because it spoils the gerrithub diff.
Change-Id: If51642a32c5cf2a757ca20485d2347410653ca2a
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use new trylock API to prevent lockups when using OCF cleaner.
Starting and stoping OCF bdev becomes asynchronous with this patch.
Using trylock means that we have to poll function that does locking each
time we want to initiate some operation on cache instance.
This is the reason why management functions become asynchronous.
Each management operation now has a _poll() operation associated with it.
_poll() uses trylock and continues when cache is locked.
Change-Id: I83b9fbe87c27433e178583411b87a68b8efaf58e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch is a preparation for adopting ocf_cache_trylock() function.
Register OCF bdev path uses vbdev_ocf_mngt_ interface now
Register stays synchronous blocking operation in this patch,
but with adoption of ocf_cache_trylock() function,
register will be asynchronous, in which case we
want to use mngt_ interface.
This series of OCF patches will enable WriteBack support for OCF bdev.
There is a lot of preparation before we will be able
to actually implement WriteBack.
Dependencies look like this:
- WriteBack
- Cleaner
- trylock
- Persistent metadata
- asynchronous management API
Cleaner is a background agent that does synchronization
of data between cache and its cores.
Cleaner usually runs every ~30 seconds to perform cleaning.
The synchronization is a simmilar operation to OCF management flushes.
We need cleaner for WriteBack because only WriteBack mode
produces dirty data that cleaner needs to deal with.
Cleaner requires adopting trylock() because in current version
cleaner uses management lock when performs cleaning,
which may lead to deadlocks if cleaner runs on
the same thread as management operations.
Peristent metadata is functionality of OCF
that allows to restore cache state after shutdown
We need persistent metadata in context of shutdown
with some data being dirty which may only happen
when using WriteBack mode
Support for persistent metadata requieres
asynchronous OCF API because in current version
we will have a deadlock during metadata initialization
because it is required to be done on different thread
than cache initialization.
Change-Id: I45d84a5fa0c96581d522050dad186b06d489226e
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455225
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow user to set timeout for poller in management operations.
Now also all management pollers have 5 sec default timeout.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ic75f2b150ef21ccd673b80aa84f16c9a24f90e32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add stop function to management interface.
It is needed for error handling when execution has to be aborted early.
Example flow:
```
rc = op();
if (rc) {
handle();
vbdev_ocf_mngt_stop();
} else {
vbdev_ocf_mngt_continue();
}
```
This can be improved in the future, because currently, error
handling cannot be a management operation on its own (but should be).
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I9ba528db8a9957ee561e5c1b5528b16bd143d5d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Replace remove_base() function by smaller ones:
detach_cache(), remove_cache_bdev(),
detach_core(), remove_core_bdev()
This change is necessary for implementing asynchronous unregister using
trylock API.
Also introduce stop status variable because unregister path has changed.
Change-Id: I62599cafacdba685848bd7d32d3d5245907ee4a1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reorder function for register and unregister path to make code more
readable.
Change-Id: I3479b231de1f6a4f84f9538f345e62eb73e6847c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452415
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
stop_vbdev() is management a function so it should be one of the steps
of unregister_path[]. It will have to be when stoping is asynchronous,
but right now it is not a hard requirement.
remove_base() no longer calls stop_vbdev() because that was actually a
dead code.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ie2d87da0fbe7807efea084181ea386b323e6b9d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453653
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make examine work with asynchronous bdev startup.
We need to count references of bdevs that are being examined,
for the case when single cache bdev is referenced by multiple OCF
vbdevs.
The construct function is not in fact asynchronous yet,
but will be after adopting "trylock" API. Adopting trylock
requires a lot of changes, so this patch is really to split
implementation.
Change-Id: I6ac091f2dd48462e74aa89cf54acb0306c30673b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450033
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add callback for construct function.
It is not asynchronous yet, but will be after
adopting asynchronous OCF API
Also adopt RPC construct call for this change.
This is done in this patch because (1) change is small (2) leaving
implementation as TODO still requires implementing a mock because we
decided that callback should be required rather than optional.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: Ib6a78e2caf34ac057d4da53ad5dda47163e8a089
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add vbdev as another argument in callback of vbdev management operations.
This is nice for async version of vbdev_ocf_construct() which uses mngt_
interface and creates vbdev structure.
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Change-Id: I8c88e0a881855b9f22fcf1f8174c888f3cfd6828
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452145
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Id49d700116bdd977893c6b89470764d97d9293bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregister OCF bdev using poller that checks if
cache has pending requests.
This prevents ocf_mngt_cache_stop causing
deadlock on reads in WT mode.
Submodule commit was updated to get new function ocf_cache_has_pending_requests().
Change-Id: Iee4cb09bc2bb859a6dcce89994c686f64924c942
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add structure vbdev_ocf_mngt_ctx that is going to be used
for asynchronous management operations.
Using such context, dynamic memory allocations are no longer required
(except for one time poller registration)
This patch also adds functions to modify context in a predictable way.
They are very important for complex flow of management operations in OCF bdev
especially after whole OCF API gets changed to asynchronous.
Change-Id: Ia402d51665330a553f7f3d74000e3636f0d6a598
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Relaunch queue poller on put_io_channel callback of OCF bdev
to delay thread shutdown. New poller will finish all pending
OCF requests as there might be some even after all SPDK IOs
completed.
This solves the issue of OCF not being able to
complete all its work because of queue poller getting
unregistered in callback of put_io_channel.
This patch also changes unregister procedure:
we call ocf_cache_stop in callback of io_device_unregister
instead of in callback of bdev_unregister.
Change-Id: Ib7e41fc25e71029a73bb76a62e39e6bf4b8189ce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vbdev_ocf_delete function accepts callback now.
RPC delete_ocf_bdev is also updated to adopt this change.
Change-Id: I1d357a5e37015268e28c07fd81dc35f48ec80ab8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Process 32 OCF requests during poller invocation.
This will result in more flat events distribution.
This patch uses new API function: ocf_queue_run_single().
Change-Id: I0bc2ef783018fdbcf6f6e938fd7ca136ade61599
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Extend existing get_ocf_bdevs call to make it easier
to get information about attached cores.
Implementation is based adding additional optional argument "name"
to existing call. Based on "name" bdevs are filtered.
Backward compatability of RPC interface is preserved.
This patch also adds tests for the case when name is given.
Change-Id: I4300ebe37e936bc5cca8e066b5f09db462a87cf7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
OCF requires memory retrived from mempool to be filled with zeros.
When mempool is created, information about element size is stored to be used
when new memory is retrived.
This is fix for issue #671
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: Ieb533e3bdae0665dae18e7b3a379da0ed843c35a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449155
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds support for many-to-one configuration
for OCF bdev. Meaning that one cache instance can
be used to cache multiple core devices.
Without this change, it is not possible
to attach core device to existing cache instance.
Change-Id: Idfce023c08b6d41490d590a8abb51f626252cd4d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Those targets use the same directories for temporary
files and at the moment they race with each other. We're
seeing intermittent failures on CI:
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_list.c
rm: missing operand
```
```
INSTALL [...]/ocf/env/src/ocf/utils/utils_device.h
INSTALL [...]/ocf/env/src/ocf/utils/utils_io.c
rm: cannot remove [...]/ocf/env/src/ocf/utils': Directory not empty
```
Fixes#709
Change-Id: I9bf6ee7a97144afafbb643a0e350f38abe79270f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447750
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use new queue API to manage OCF queues dynamically
This change allows for dynamic creation and deletion of queues
on get_ and put_ io channel.
Qeueues no longer depend on number of cores in SPDK.
Queue-to-pollers mapping list is removed as well
as locks "q_ocf_lock" and "vbdev->_lock" as they became redundant
Change-Id: I5069e1f8535f505816184a333db876afb925ac44
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
- locks moved from ocf to adapter code,
- 'data object' renamed to 'volume',
- context and volume API reorganized.
Change-Id: Id4670ddfcb8eda9aefabc273497498c5bd3db1d5
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444092
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Robert Bałdyga <r.baldyga@hackerion.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If success is false in each bdev module's spdk_bdev_io_get_buf_cb,
call spdk_bdev_io_complete with SPDK_BDEV_IO_STATUS_FAILED, and
then return.
Change-Id: I6f106d8d39a3616f7305201fa2efc4805d4d00ee
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Make modyfication of global allocator index tread safe
by using atomic operation
This patch also changes mempool size to be 2^n - 1
which makes it more efficient
Change-Id: I5b7426f2feef31471d3a4e6c6d2c7f7474200d68
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442695
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
