Created Linux AIO bdev disk with 8192 block size can not work
on some guest OS, i.e. CentOS 7.x, and may stuck when guest OS startup.
So applying block size smaller than or equal to 4096 bytes may be a more
suitable and common choice for most guest OS or cases.
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Change-Id: I0f2ce4e1fd19f337c3128ad3511823c984f0aac8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2489
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The bdev_auto_examine flage will impact how bdev layer examine a
disk. If bdev_auto_examine is true, the bdev layer will examine all
bdevs as usual. If bdev_auto_examine is false, the bdev layer will
only examine a bdev if it is in a whitelist.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If5b26283905f97f8a95ae9065226fa3dae6c27a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2114
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These paths are not being looked up by clang (cc) by default, hence
currently it's not possible for vm_setup.sh to compile ref spdk on
FreeBSD as the compiler is not able to find libunwind.* files.
The reason why it looks for libunwind is because get_config_params(),
which is passed to ./configure, uses hardcoded gcc (not $CC) to check
if libunwind is supported.
This fixes the particular issue with libunwind (and potentially other
files for different options), inconsistency mentioned above should be
addressed separately (Issue: #1397).
Change-Id: I2afe11a669ba248ddb7854aa2a36a36372e944f4
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2434
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Since gcc 9.* can be used across different distribution, the old check
no longer applies. Instead of looking for ArchLinux, check the gcc's
version directly to make sure proper options are added regardless of
the distribution (.e.g. Fedora{30,31} is also shipped with gcc 9.* at
the moment).
Change-Id: Ic493f411e8d886cae9bd5e2f389cb632d7b9f98a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2432
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
A newer version of shfmt was released, but the script still
looked explicitly for the older one.
Make it execute the first binary '^shfmt.*' in PATH whose --version
returns at least v3.1.0.
Change-Id: If621abfa4d995a9dc985e6bab8c33aa36c327fae
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2428
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Following patch made sure that CQ/SQ are allocated in
physically contiguous manner:
(64db67) nvme/pcie: make sure sq and cq are physically contiguous
Using MAX_IO_QUEUE_ENTRIES is enough to make sure that either
queue does not span multiple hugepages.
Yet the patch made sure that whole page is occupied only
by the queue. Which unnecessarily increases memory consumption
up to two hugepages per each qpair.
This patch changes it so that each queue alignment is limited
up to its size.
Changes in hugepages consumed when allocating io_qpair in hello_world
application:
io_queue_size Without patch With patch
256 8MiB 0MiB
1024 12MiB 4MiB
4096 24MiB 16MiB
Note: 0MiB means no new hugepages were required and qpair fits into
previously allocated hugepages (see all steps before io_qpair
allocation in hello_world).
Intersting result of this patch is that since we required alignment
up to the hugepage size this resulted in reserving even two 2MiB
hugepages to account for DPDK internal malloc trailing element.
See alloc_sz in try_expand_heap_primary() within malloc_heap.c
This patch not only reduces overall memory reserved for the
queues, but decreases increase in heap consumption on DPDK side.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I75bf86e93674b4822d8204df3fb99458dec61e9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2244
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is more to exercise the various CRC-32C back ends than anything
else but will calc a CRC on the source data and if -y is
specified it will also calculate SW (ISA-L)f defined CRC-32C and
compare every operation against what the accel engine came up
with using whatever back-end was enabled.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5ecd3c474717bce4e46d75875a784f888052993e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2073
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the CRC function at the framework level and implement the
software engine back end to use ISAL. The patch series will continue
to include an option for accel_perf to test CRC as well as IDXD
implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4eff3bbcf98c0bc2928a48272a57031c8b96394e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2072
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Currently the new transport is dynamically allocated and looks like
not freed when the application exits. Trying to use the
__attribute__((destructor)) function to free the allocated memory,
it will not work in the case of user created thread as this function
is called right after the "main" function while other operations
may be still ongoing.
In this case, add a global array of transports.
Change-Id: I610b1e8114ba2e68abbd09ea5e02a9abce055e70
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2415
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The pipe buffer gives about 19% randwrite and 56% randread
performance boost on arm64 from my test. We can also enable it on
arm64.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Iff4c6eaffb4ec5ae8fe02b35f72aed7f6b272bb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change OCF logger callback to
use spdk_vlog interface,
instead of manually deciding log level and
printing messages to a FILE.
This allows user to modify logging preferences
for OCF without modifying our OCF code.
Change-Id: Ibe526c97965acb9a5e9816446354e3a200d0cc31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1947
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Some users of SPDK API, such as OCF,
may want to generate logs with arguments themselves.
In that case they would need to first create a buffer
and then pass that buffer as a single argument to spdk_log().
This change adds spdk_vlog() which accepts va_list as argument list,
so it is easier to use spdk_log().
Change-Id: Ie2a3ac481035a250fcd68d0f9b8292008ebb6fe0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1946
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
