Using not FAILED but ABORTED for the completion status of the I/Os
aborted by reset will be reasonable and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c8181dd33453a330888cffa93505e6fc462f278
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The last patch ensures that the parent I/O terminate with failure
before continuing splitting process if one of child I/O failed.
This simplifies abort operation for I/O splitting.
Then we can use bdev_abort() and bdev_abort_io() nestedly.
Add necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I562bb6675f1fa380bc53dbe369138317ead66fe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Previously, bdev_io_split_done() had continued splitting process
even if the status became failed. To abort split I/O, this patch
changes bdev_io_split_done() to terminate with failure before
continuing splitting process if the status became failed. Add
necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd1ea49c22523e8c06fb45ebdcb2c84a57afd2ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2234
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to abort split I/Os. To abort any I/O by
bio_cb_arg, they have to be managed by the submitted I/O list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9459d9d2d3511aad0325dcc20d88610444a4ea04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having that transport can decide about particular ctrlr attributes not
globally but per ctrlr.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia3fb0d4e576cb9f8ce6df75f775e2fd5727d7f48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were many cases in the past where discover_bdevs()
is the first app to parse given (invalid) config and silently
fail without even printing the exact error. That's because
the spdk app that's started inside that function has &>/dev/null.
discover_bdevs() is currently used only in nvme perf scripts,
so move it there. It should be probably simplified there,
but the priority for now - and the purpose of this patch - is to
remove it from autotest_common.sh so that no one is tempted to use it.
Change-Id: I1d5840dde9272cdaa1ff282022c6ec29a297df50
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1554
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
They had no effect, only the first section was run.
I'm not sure how to run more than one, but it's not
a problem if we stick to just one. There's another case
right below where no `--section` param is specified and
all sections are run.
Change-Id: I399bef07b671ee81bd289e77f2a8203c96268807
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1553
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This function is not really reusable. Inline it to have
a simple, top-to-bottom test flow.
This already shows the test is unnecessarily complicated.
If anything with lib/virtio goes wrong this file is the last
script that will be used for debugging. It would be OK if
there simpler tests for lib/virtio, but there are not.
While here, also add comments for the three major steps
in this test script because it finally looks sane.
Change-Id: Ic8ae611d853d4a685d38aa3112d16e396b0e110d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1552
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
About 1 second speedup. We can use RPC deamon everywhere except for
load_subsystem_config (since it's not a real RPC and it's handled
differently).
Change-Id: If14964c6688976e0f2edec40198c30d5cbc21e83
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1551
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
That common.sh requires e.g. qemu installed, which is
completely unnecessary for this test.
vhost_kill() used to clean up e.g. leftover fio files,
but now instead of deleting them, just tell FIO not to
create them by using --verify_state_save=0 fio param.
Change-Id: I5e63dad5681e715ee5dac131ec9b5c17bfdac2eb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1550
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Tracing functions introduce performance overhead
so by default keep them only in debug builds.
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Change-Id: I08e0a139c3efa87b0f46b7e7a026b0676f3e8634
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If Namespace Change AER is not supported by controller we
need to reset controller after changing namespace configuration.
Change-Id: I640e925fa02881c7b8541f2c0353e78c51074cdc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1912
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test creates/deletes namespaces with Namespace Manage commands
and checks if appropriate NVMe CUSE device nodes are created/removed.
Change-Id: Iecbb4949c3843e41d4dbf365b0a57de3362c8947
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1131
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test changes the range of active namespaces and checks
if apropriate CUSE devices for namespaces was stopped/started
properly on CUSE update.
Change-Id: I9683a0ab6ff28328d4788c49a834cef31c0582cc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/780
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Always print QEMU's output to the screen - there's not a lot
of it and something may come useful. Let's know what's happening.
The text-based QEMU monitor always runs in an interactive mode,
so post-process its output a bit:
$ monitor_cmd info status
QEMU 5.0.0 monitor - type 'help' for more information
(qemu) info status
VM status: running
(qemu)
Clean it up by removing the first line, then filter out any
lines prefixed with "(qemu) ".
Change-Id: I20b56bbdfc868bc11468dea5ef246cf1db1b4ab8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2143
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Neither Debian or Ubuntu have qemu-img in their package repos. The
actual qemu-img tool comes with qemu-utils instead.
Change-Id: Id7cd538144850f3e2da47e279c9f10d5e7179617
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifdaf1e03e82a3167d994945661d9e5f0fba9224e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes introduced by 9307ff5a are applicable to Fedora 31 too, thus
use the very same copy of the patch while compiling vpp on that
version of the system.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4445497f928a1a509c5adbccfe244ff9eef7275b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib894655d69c507c4dbc3aebd72105eb85737e16d
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test was after the part in the nvme.sh script where
we kill the stub. So the call to get_nvme_bdfs was invariably
returning nothing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ice98cca8878ccff06057da5f96607eccffc5da39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2746
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help us to capture the error case in CI.
Change-Id: I4ff348e492d6acd18ff4552b9a233965db5a1019
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2734
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This only covered one test case for NVMe reservation feature, so remove
it to test directory.
Change-Id: I7920679ce14dd4d6a9164cb7663016bc7a3a4929
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This type was changed. We can avoid updating the major
version of libspdk_sock though because this type is in
the spdk_internal sock header.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib0d6cc0d99f97a34f618f776ac28e15e0a750356
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2741
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't want to rev this more than once in a release cycle. The idea
behind that is that nobody should be making shared objects from a commit
between two releases so we only need to rev once per release cycle.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8162683152bf86f41061309d341a54959e1c3646
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Move "source $rootdir/test/common/autotest_common.sh" above where
$SPDK_TEST_STORAGE is used, or else $SPDK_TEST_STORAGE is NULL for
its value is assigned in autotest_common.sh.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ie86af6034847ca2c046b18cd67cd8ad5707697a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2694
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently, Ubuntu 20.04 exposes btrfs-tools under different name,
btrfs-progs. Be nice and fallback to that package name if btrfs-tools
installation fails.
Change-Id: I78d51b081069b252c59b13d2347cdd077938131a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2671
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is detected by some shellcheck versions.
The wiki for this error tells us we should ignore it if we
know what we're doing.
Change-Id: I461dcceace652bc9abd1cfb9f6a2794b98016e96
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2429
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fixes#1382
System memory gets fragmented over time and repeated hugepage
allocations fail, giving us intermittent failures on CI. Linux
allocates those pages only when requested hugepage count is bigger
than current hugepage count, so in order to prevent any additional
allocations just stick to a single count all the time.
autotest_common.sh already exports HUGEMEM=8G for Linux systems
and 2G for BSD ones. `setup.sh reset` doesn't touch the hugepages,
so practically only the first `setup.sh` will allocate memory now.
The two setup.sh calls are run with sudo, so they need
HUGEMEM="$HUGEMEM" to work.
Change-Id: I48b4a720bad4e1da14e78313b4db0eb60a177c38
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2374
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
It was targeted only for Fedora 26 and this particular version reached
its EOL two years ago. Additionally, new version of the iscsiadm tool
was relased since (as part of the iscsi-initiator-utils package).
Change-Id: I14136e98b378f0b44a4a43c5ae7a129cf8f7c306
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
This is an important aspect of ABI versioning.
There was a change to the spdk_bdev_opts struct
which is accessible from the public API that results
in an ABI change.
There was also a change in the spdk_accel_module_if struct that
will affect new modules so its major version needs to be revved.
There was also a change in the publically accessible rmda_hooks
structure which forced an ABI change in the NVMe library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5cc6886fe01b4adc2836b6e15995471f0361dc29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2663
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
I missed a few files in this library the first time.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2ad55355e6348eaa10384a148dd45deb9f68fc2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2442
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove inclusion of spdk/event.h and spdk_internal/event.h from
SPDK nvmf library. Their dependency had been removed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibc6c52ab41555d9b29afc3e16c1c3fd0bf5fc63a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI library still needs to include SPDK event library only for
shared memory ID to allocate shared memory for iSCSI top application.
We will move the code to module library separately later but remove
all other inclusion of SPDK event library in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21d77b9cc00c6a1f512546a6a0202c8fa5623bed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2686
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The UT can test the received aer reqs number and
check if the reqs are continuous.
Change-Id: Ifa1cb9dd4cdae5526fc80fe6c1b504ad9873d0f8
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2549
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the AER events in nvmf target from one to four.
Change-Id: Ie31988b49d68bdbc28ab2e09c783e681d3017e2b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2548
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
current_queue_depth should have been incremented only if I/O submission
succeeded.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib26b42b0ab195eba7536b2403a31d42305d77433
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2585
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This helps ensure thread safety on creation of the
netlink socket, when probe is called from multiple
threads at once. It is also a lot more clean - we just
create it once, rather than checking every time probe
is called to see if it has to be created.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I528cedc3ff44de6ea8ecaf6d2389226502ba408e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2681
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit 79215d80c1.
Reason: Find the bugs while using batched. For example, if
we fetch 3 CQEs, A, B, C and put it in a cqes[] array.
Then we leverage io uring cqe seen to handle, Then we handle the
CQE A, then invokes the call back related with A. In A's call back,
it may also call the reap function (sock_uring_group_reap),
then the CQEs will be handled again. Thus the CQEs B and C can be already
handled. Then we will handle B or C again, then it triggers the error.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I67ece3b24e677b88d66d08722b00539693b42e1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2543
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Do not skip if db_bench is not available.
Explicitly fail.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I96b0fde50aedf20654a114a2c28d24bfed478b11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2515
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add simple periodic round robin poll group migration to the example
application to exercise SPDK thread dynamic scheduling.
Add CLI option to enable the feature manually. Default setting is
disabled, and the period is specified as micro second.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4639e94ce00611a600ff068e754ee6f31905565c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2556
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When testing fuse with blobfs, we used "bs=4k count=32" as the test case,
but when it comes to bdev layer, the IO size is 64KiB, and alignment is 4KiB,
so bdev_io_get_buf() will return error as the following message:
bdev.c: 789:bdev_io_get_buf: *ERROR*: Length + alignment 69632 is larger than allowed
so here we can resize the AIO alignment size from 4096 to 512, because the bdev memory
pool default alignment size is 512, with this change the error will not occur in
bdev layer.
For the umount operation, since the fuse module will use send message to do the umount,
here we can insert one second barrier to wait for the umount to be completed before
killing the process.
Fix issue #1406.
Change-Id: Id3c67900c87a5797718c28c184a925275f90c7d4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2587
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
I found this flag weird while debugging a lvol with
thin provisioned Blob, so make it consistent with it's Blob.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Iae555020d5781dfcf4d4f072a47e9573d35b8705
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently used fork of nvme-cli (nvme-cli v1.8 with our patch)
doesn't work well with namespace manage feature (e.g. namespace
deletion or working with NSID=0xffffffff). These problems seems
to be fixed in later versions of nvme-cli (v1.11.1 for now).
Nvme-cli tool must be patched to support namespace devices
exposed as character devices. Required modification is
already merged with current nvme-cli master in
commit: e770466615096a6d41f038a28819b00bc3078e1d
and hopefully will be available in the next release of nvme-cli
(>1.11.1).
Next steps would be:
1) Change the commit hash to a release that includes mentioned
patch.
2) Drop the compilation when system repos contain the right
release.
Change-Id: I07846cba955e580f5a8861ad4c7e50e7f4adccfb
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2417
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was overlooked when the module was merged.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia7bd8710741bf5a82e7dd27925ecef1e59ed2938
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2360
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of blindly dumping tmp files at random places, try to
determine the best place for given file based on the available
storage.
Change-Id: I92a7adf6cd17222510fa76969856a50f74966c0f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1868
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch updates the suggested branch to 5.0.0,
which at this time contain all necessary patches to run
FTL tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idddea7154565f710a8325ec73de98cfe52e6ab8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
In persistent-metadata test,
add a sleep because of issue #1348
Change-Id: If9ecaf660ac7ed18614d87cc775e60371ca84a97
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
This reverts commit 6d6052ac96.
This approach is no longer necessary given the patch immediately
preceeding this one.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I5aab14346fa5a14dbf33c94ffcf88b045cdb4999
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2512
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
This patch adds use of RDMA provider API to NVMEoF initiator.
Makefiles have been updated with new RDMA lib dependency
Change-Id: Ieaefeb12ee9681d3db2b618c5cf0c54dc52230af
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch updates NVMF target to use RDMA provider API
to create and destroy qpairs.
Makefiles have been updated with new dependency on RDMA lib
Change-Id: Iae35aea601380f8d1a6453a7fd6115f781e126f5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since gcc 9.* can be used across different distribution, the old check
no longer applies. Instead of looking for ArchLinux, check the gcc's
version directly to make sure proper options are added regardless of
the distribution (.e.g. Fedora{30,31} is also shipped with gcc 9.* at
the moment).
Change-Id: Ic493f411e8d886cae9bd5e2f389cb632d7b9f98a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2432
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Allowing for custom crc32 polynomials isn't really within the scope
of SPDK. SPDK libraries have shifted over to using more optimized
versions of these functions wherever possible (e.g. ISA-L).
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie4837010874e957481dd00896389b38c842445e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2424
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In current implementation, lib/vhost assumes that it always runs
together with lib/event, and would call lib/event's functions in
vhost.c. This is not necessary and make program unable to
create/destroy vhost module without init/fini the whole spdk env. It
would cause problems when program runs with vhost and other spdk
components together.
In this patch, we remove the dependency of lib/vhost on lib/event by
adding a global vairable g_vhost_core_mask so that it could handle
core mask by itself.
Signed-off-by: Kyle Zhang <kyle@smartx.com>
Change-Id: I38ceb92ac39b6980955346fda41e968aaead863d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1204
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rocksdb test file changed because
it relied on logs format by doing grep/cut,
so failed after format was changed by this patch.
Change-Id: I81b8747560d7c803faec1650a3ead042bee2508b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2023
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
cache_free_buffers() was only used in the file deletion and unload, and
the file is also freed after that, so here we combine the cache free and
file free together and do the cache free in the cache thread.
Change-Id: I57e9a27c9a6467bcf6c85cd277db3b57e06c98e5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1795
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also poll thread in the UT to cover the thread context switch.
Change-Id: I3dc765b66aa707c36eb3913b3e0d2c1c3986e282
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1793
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This file isn't exclusive to the nvme lib. As such, it shouldn't
use the internal SPDK_LOG_NVME flag.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib6d239ad2e45e58fb97a5ea70b01ce72afa938c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2246
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The log_rpc library should have its own flag.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7cfe4c9136089e83bdf2730c727a6602ffbaf83e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2215
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are several functions in the internal header that
are only used in the library that have kept the spdk prefix.
Add those to the suppression file since nobody in practice will
be using them.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iae1666c6f0bb853e62b89858037a5cded38c9b66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2213
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While we are here, change SPDK_LOG_JSON_UTIL to SPDK_LOG_JSON
It fits better with the naming convention.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I12bc8a44acf3effc5effcbc40ef1ab9af6e52c6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While we are here, give the library an so suffix
which was missed when the library was initially
created.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I68929127bf672c0f2f7153f9716882d03151480e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Apparently the environment wasn't getting passed to this test so
the configuration wasn't being preserved.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I65126e94c82d92fe33e81d2d0a6ef578aa506a34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2251
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The old suppressions were only relevant for the 20.01 release.
We will have new suppressions in the new release though,
so leave the plumbing to write out suppressions.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0c673244dfc767c31e646fec980a02ca88be37a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Use 20.04 reference build instead of 20.01.
Also updatethe NVMe-oF Makefile to reflect a change to the
ABI since 20.04 was released. This has to be done in the same
patch to keep the build from failing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3201f698ecb441021964debda760866dbbc01a64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use already cloned sources in spdk_repo/spdk and
create a reference build.
SKIP_ABI_TEST flag is deliberately not added to
autotest_common.sh because of it's one-time use here.
Otherwise autobuild.sh would fail if vm_setup.sh is
run for the first time on the system. There would
be no previous reference builds to use.
Change-Id: I0c32041321ca25b91acb498f852ef14e7869daf1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
There were multiple ways to check if particular UT should be executed.
This script unifies those.
To allow executing unittest.sh as standalone script,
verifying config.h flags was chosen.
FTL is an exception, as it always compiles if built on Linux.
Same condition was kept to execute the UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I83b3a58d4574154166af6763e7d1c38d75b8475d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2019
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add both the plumbing in the engine to call module entry
points if they exist as well as the json write config
for idxd (the only module with config info at this time).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I91376d3fc60227cd79fae17b164722619eafb9e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2052
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now, each bdevperf_job gets it's own bdevperf_thread. Scheduling the
jobs onto cores is left to the underlying event framework in the normal
case. In the multi-thread case, cpumasks are set on the jobs' threads to
ensure they're distributed appropriately.
Change-Id: I55f1a44b4262d715954b3a63bf00b8d2321fafca
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1512
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe spec defines "Keep Alive Timer" feature ID as optional and there
are targets that do not support this. SPDK fails to connect to such
targets.
This patch allows Get Feature "Keep Alive" target to fail with
INVALID_FIELD status. In this case we just continue with keep alive
timer value stored in controller opts structure. This value is already
communicated to target in CONNECT command.
Fixes#1328
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I52e7ea3cb66073ce6cc168a169989bd179041618
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Detect available VMD subsystems and disks to bind
to userspace for tests.
Re-run the default setup.sh configuration once
tests are done.
Additionally add verify_state_save option to
fio config, otherwise this will not pass 'git porcelain'
in autotest.sh.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5d5bded7ee214f39b96bb6ae1e82d59592629aff
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1959
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Blobid and md_page is claimed as first step of blob creation.
If blob creation failed, both should returned to be used by
other blobs.
This caused multiple reports of:
"Metadata page 1 crc mismatch"
when loading blobstore due to md_pages not actually containing
the written out md pages.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I495452c578d879f749281cebf8975eb2c1c7f79a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2057
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This gives a chance to quickly see why qemu might have failed, i.e.,
why the .pid file has not been found.
Change-Id: Ia1a5ae417164c865eede07cdb6dd4df1edc0b0b9
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2005
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to make the code that's about to be written out more clear
and drop the unecessary usage of a subshell.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I024012b08fc3c29d3c37c59a42e64d8429929799
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2004
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From the code, and due to lack of any help() or usage(), the way how
$disks are meant to be declared was not clear right off the bat.
Comment out how the argument should be formatted and cleanup its
usage within the code.
Change-Id: I3a4b077d5026f6f17d0ccc27183d2a89222169f5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2002
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The way how qemu cmdline for run.sh was being prepared was a bit
convoluted and simply hard to read. Instead of having it as a single
string, use it as an array and as such expand it for run.sh to use.
Change-Id: I1ee1bafbdd8a367a69c266d5a33c4d728fc0fe7b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2001
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The size of the nvmes[] was being compared against a plain string
(which in arithmetic context always evaluates to 0) due to improper
var referencing.
Fix this by using (( )) to be more flexible and not depend on the
parameter expansion syntax.
Change-Id: I56fd3b98940961475638099dc66aec5544c832c7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2000
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
reduce library uses unlink, but the unit tests need to
override it in a specific way.
But linking unit tests with LTO requires the wrapper
definitions be in objects/libraries listed *after*
the object/library that refers to it. So we need to
make the unlink wrapper somewhat generic. We do this
by exporting a string and callback function that the
user can set to enable a user-defined function to be
called when unlink() is called with a specific file
name.
Also revert 3ef6d06 as part of this patch, since we
no longer require the workaround that it implemented.
Fixes issue #1357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ee4c424ad31fe7d91d7b524ed47aedd279e5b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When grepping the log for a particular test script file,
e.g. lvol_test.sh, we get 20 matches from all the grep | sed | awk |
etc... Only the last match is the actual script execution. So
silence the first 19. They're not particularly useful anyway.
Change-Id: I96c64a1c6d79cecd4966d3c1faddbc014ea8b5b1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2102
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: This can improve the performance.
Change-Id: I3f5526ab8716cb0771b5e193afa9a0dbffec5cc0
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1929
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Bug introduced in:
9fc706f test/vhost: improve run_fio --local option
The original "nohup + no-wait" for spawned local VM fio
processes was probably as expected. Turns out we can't
"wait" for fio processes in some cases, and migration
is one of them.
run_fio() must start fio and exit immediately, so that
parent script can have a chance to do the migration
process while fio is still running.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3c0ab65e96bfa0b020eb42df76b14deda2b43e83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1937
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This makes sure that we will have the hugepages we need
even on systems that don't have them configured by default.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I9a0d82e0abf6363c1c037732b543c05e8931f97e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2141
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
mkfs also uses 512MiB as the default cache size, so here
we also use 512MiB for fuse, or the fuse will allocate
4096MiB.
Fix issue #1309.
Change-Id: Icb4c3a175107bb56f4f84a0b0435d05f6f44f15e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2112
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Used to determine whether IDXD isto be configured, previous check
did not work on FreeBSD, only Linux.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I70148ee2f0fffc83c2b89d2de6e81193b9357d3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2060
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Single file segments allow us to work with both
1GB and 2MB hugepages.
Change-Id: I2a455f9d23fafbf0746423f69379b74939ac2e9c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2021
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Check which driver is in use for detected virtio pci device.
If it's not uio or vfio then don't use it.
Change-Id: Ibf901c71e0125394c6cb8fd1499fc723f2308010
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2018
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Drop the static configuration file from spdk repo and
generate it with save_config RPC instead. This also lets
us drop a huge wart from those test that is discover_bdevs.
Change-Id: I74b2adbc2f391a04db9acd9ac7d0e8f381b41da0
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1549
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's set once in autotest_common.sh and must not be set anywhere else.
Change-Id: I575d42f2b5caa38d9836f26b8aa6e414682d9554
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's no reason to require running as root, so
remove the check for that.
Change-Id: I4fa97e5a500f4715c6949b8d84bfad4b59b1c474
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1547
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove a lot of lines which don't do anything.
Change-Id: I7244c24332c36ad02634abe82ddf606f4c3faddc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
"make configure" was missing.
Run "exec $SHELL" to reload current shell and use
new git thanks to updated PATH.
Change-Id: Ia92a6a3ce3ccf515a23353d91b8cde3a13b7c92b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1997
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Couple of reasons here:
- "install" should run first, as it runs pkgdep.sh which
actually installs git for all distros.
- Because of that we can remove ArchLinux and Centos7
git installation with package manager - this is already
covered by pkgdep.sh.
- install_git routine relies on wget and autoconf, which
have to be installed first.
- install_git routine (which actually upgrades git on
Centos7) makes it possible to use "git -C". Default
1.85 git version on that system does not support that.
Change-Id: I1422f8c2a1c49eb38f4253909a152a7bc99b173f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1995
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This might be a bit confusing, but it seems some of the
distributions using "minimal" install do not come with
wget installed, and it is used frequently in our provisioning
scripts. I stumbled upon this issue with Centos7, but am
adding wget for all distros, just to be sure.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9621d5ce92014623d76d70c9e22d9eefa9ea0203
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1994
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
idxd support is disabled by default right now due to being
experimental. Running unittest.sh would cause failure in such case.
With this patch idxd_ut only runs when it was compiled in.
Verifying if the UT was executed is done in post_processing.py,
by verifying every 'run_test' was executed.
Meaning that CI makes sure it is executed.
resolves#1369
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iafbc84839aa9dc62ead8821da8b860e1741e3624
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2012
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no point in setting this value on submission
and changing it on callback.
Since it is based on blob bserrno.
lvol_task is removed in next patch.
This change was motivated by lvol_op_comp() accessing
the task->status pointer on hot path for I/O.
There is no need to do so, so just pass status.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I17461fcf355f771f4de4e6d5ec1900d5042bd3d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1804
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The UT stubs weren't calling the assigned callbacks
and some weren't assering the passed values.
This will come in handy in next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I86eec58a28e40a93ff06b7e7c715c17d25e28818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1970
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
g_spdk_iscsi_opts is encapsulated and not directly accessed by outside
of iSCSI library. So do not add it to the map file of iSCSI library
and remove it from the map file of the shared build
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9202891813208329ec6b3b0e076e4f608a38ef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previous to this change it was possible to register
same nvme_io_msg_producer twice. This kind of functionality does
not make sense in current scope of it, as each message to/from
io_msg_producer does not have identifier other than this pointer.
In case of nvme_cuse this allowed creation of multiple /dev/spdk/nvme*
devices and caused an infinite loop when detaching an nvme controller.
This patch disallows that and adds test for nvme_cuse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5f56548d1bce878417323c12909d6970416d2020
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of refering to single controller, allow to point
and check different ones.
Next patch in series will verify lack of existance
of "/dev/spdk/nvme1".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9656ac06e86c8946b45b2ffc93119d31a1ccc5ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1979
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
More tests will follow in later patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6c45b94cc17219acfae863c774fc7dbc33625c85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Module, etc., will follow. Notes:
* IDXD is an Intel silicon feature available in future Intel CPUs.
Initial development is being done on a simulator. Once HW is
available and the code fully tested the experimental label will be
lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
* The current implementation will only work with VFIO.
* DSA has a number of engines that can be grouped based on application
need such as type of memory being served or QoS. Engines are processing
units and are assigned to groups. Work queues are on device structures
that act as front-end groups for queueing descriptors. Full details on
what is configurable & how will come in later doc patches.
* There is a finite number of work queue slots that are divided amongst
the number of desired work queues in some fashion (ie evenly).
* SW (outside of the idxd lib) is required to manage flow control, to not
over-run the work queues.This is provided in the accel plug-in module.
The upper layers use public API to manage this.
* Work queue submissions are done with a 64 byte atomic instruction
* The design here creates a set of descriptor rings per channel that match
the size of the work queues. Then, an spdk_bit_array is used to make sure
we don't overrun a queue. If there are not slots available, the operation
is put on a linked list to be retried later from the poller.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels with see the ring sizes increase. This is done from upper layers
via public API into the lib.
* The sim has 64 total work queue entries (WQE) that get dolled out to the
work queues (WQ) evenly.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It seems like -S will sort only keys within given objects, but if
actual objects are in different order, the sorting results may still
differ.
To avoid this, replace -S with jq's sort() which takes entire array,
and all its objects, as an input to be sorted. This should result in
the same output regardless of the initial position of given objects.
Change-Id: I4eca9474f1cea73040ae4a13692a1074fa1c4fc3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1973
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Couple of nvme_cuse RPC operations were done as part of
nvme-cli test cases. This patch moves those out to separate
script.
Next patches in series will expand those.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia3123939901368af3570b127230f828437f39ef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
${nvme_name} refers to device name when bound to
kernel nvme driver. One of the checks modified by this patch
would return true for case when original device name was anything
other than "/dev/nvme0". Any higher number id would not exist
in /dev/spdk path anyway.
Meanwhile devices under /dev/spdk are created in order
by the SPDK, so we are sure they will start from 0.
This test only registers single nvme_cuse device so that would
be the only one.
So this patch replaces ${nvme_name} with hardcoded
value of ctrlr="/dev/spdk/nvme0" as this is always the outcome
of this test.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I521ebe68685234774e8b94175553c8c8609c0bd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1919
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The qpair states should be maintained at the generic level.
Always going through the transport disconnect function is
one step in that direction.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I019b2b4a14fe192eff5293f918d633dde2c5400a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1851
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This variable really indicates when a qpair is
no longer connected. So NVME_QPAIR_DISCONNECTED is
actually much more accurate.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia480d94f795bb0d8f5b4eff9f2857d6fe8ea1b34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The $enabled_types consisted of a newline, two tabs and a trailing
space. In that form it was checked against a string that consisted
of array items returned in a form of:
foo
bar
The check initially was failing since plain [ was splitting these
strings into multiple words without proper quoting in place. This
could be seen in the build log:
line 52: [: too many arguments
This is fixed by replacing [ with [[ and using proper quoting on the
rhs of the expression.
Additionally, $enabled_types is now converted to an array to make
the comparision more natural without worrying about the whitespaces.
Change-Id: I6e3e539f36567443b36327f3bcc083de387b8474
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1864
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There were 9 function symbols removed from the global list
of the library. They were all symbols declared in env_internal.h
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I23210f27dc2bf23ae9e9cf76babb54e623fbc917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1708
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This should help reduce confusion within libraries about
which APIs are public and which are private.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7755081b016f269d4761d8cc2ce4bac2835c077d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1703
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, increment the library version since some non-public symbols have been removed.
Please note, SPDK_LOG_BLOBFS is included in the map file because it is used by the
blobfs_bdev module.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib05c0b6630951d97b1a5b2931746471eeb9d9630
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1702
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the following warning by allocating status dynamically.
In function ‘nvme_completion_poll_cb’,
inlined from ‘test_nvme_completion_poll_cb’ at nvme_ut.c:546:2:
/var/jenkins/workspace/unittest-nightly-autotest/spdk/lib/nvme/nvme.c:92:3:
warning: attempt to free a non-heap object ‘status’ [-Wfree-nonheap-object]
92 | free(status);
| ^
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I321b88414f431c8c18617d3ee882b8ab851a70fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1940
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allow multiple fio config files and fun them sequentially
in loop against provisioned Vhost+VMs setup.
This should decrease total time needed for performance
benchmarks as we can re-use current configuration rather
than provision from scratch for each workload.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0c4e37f0bb9f49f7614c8001d74d72b99470c084
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1899
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gen_nvme.sh requires that all the nvme devices are not bound to the
nvme driver which doesn't have to be the case when clear_nvme() is
called. To not depend on which driver is in use, simply iterate over
pci bus to find a proper device. This avoids additional setup.sh
ping-pong which is required to make use of gen_nvme.sh.
Additionally, upon exiting, in case mounts for given nvme device were
detected, keep the test environment reset to leave nvmes bound to the
nvme driver.
Change-Id: I428c5e2b0517553d267411a30316bde5d1ce8eef
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As other small change, function iscsi_conn_pdu_generic_complete()
had been declared in conn.h but defined in iscsi.c. Move the
definition of it to iscsi.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1bd796288036f78a7cba8a1c0af93bd6bc19e9cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1890
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The following patch will remove the "spdk_" prefix from iSCSI
internal APIs. The iSCSI global data g_spdk_iscsi is also local in
SPDK iSCSI library. Hence rename it by g_iscsi for consistency.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If35e9d58b1388fd725a505ee9be870e414c37ba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Fio output was saved to the same file as original
fio config. For a single test run this was not an issue,
but in case we run more iterations (like in performance
tests) we cannot overwrite the original config file.
Use fio config file name (without file extension) and add
".log" to the name.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If6f9d582ff5817c85b7cbf9192530b87a2079274
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1898
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Missing space caused wrong string concatenation
when running test with multiple VMs.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I594035b3c5c952cf74e4b6c2002e975f82e303a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1896
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
None of these operations need to occur on the job's thread, so just do
them in a simpler loop on the master thread during shutdown.
Change-Id: I6fda3c4b37c206e9e1e43af9d1a49a2e83afcd67
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1872
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can collapse the two loops at exit time into one this way.
Change-Id: Iffe06e03c54fadc605e168580b69d2c710ac1168
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1849
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is going to be used in the shutdown path, so move it
up to avoid having to forward declare it.
Change-Id: Ia5e4d9ef4290f6d67528ee7d3f8a2e15bc39868d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1870
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As we move to more complex job definitions, it will make more sense to
print the stats for each job separately, rather than grouping by
reactor.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1a94c36a5d272ae406b0b201dc05ec020ab651a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1848
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
No reason to delay until the I/O submit function. Do it up front
and fail if it can't get one.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I646bc68f8dd7207667e546f7be44464909fa2cc4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make these two separate code paths so normal mode doesn't need
to do an spdk_for_each_channel and iterate every thread just
to get to the single thread it wants to build a job on.
Change-Id: Ibe57b3f3d4f990550ef4f5da93cb8ca54ae3ab85
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1510
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These are the final test cases from the series of ports, thus clean up
the python script and its lib as well.
Change-Id: I9923fc93fbeb8c2d54dd2dad5acae41eaf5cfff5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is meant to reassemble python's math.ceil() that was used
throughout the test_cases.py in couple of places.
Change-Id: I0d7d13ffd1121b12d58f00fb6ca59d76a237802e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This test case covers unregistering of all bdevs by removing malloc
device under the lvol store with snapshots|clones present (test case
no. 553).
Change-Id: I7e706230c5156b5a072e73c774da492597a53379
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/892
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test case covers removal of the lvol snapshot while having a
snapshoted clone on top (test case no. 552).
Change-Id: I0674877bb3c39fa360c886f1b82f77e675109484
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/878
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test case covers proper order of lvol snapshot, clone removal (
test case no. 551).
Change-Id: I0faccaba0c2a097e2b6d03bc0446d1fbc1ef1891
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test covers lvol store removal from the underlying aio device (
test case no. 255).
Change-Id: I1e514abc0d0cc601996c6744dd65279d0865cf93
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/866
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test covers several instances of bdev resizing (test case
no. 254).
Change-Id: I31cd2d807a19e0452801ffe4721b8c154daa204b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Remove spdk_ prefix from the name of internal APIs.
Add single underscore as the prefix of the function name to the
private functions if we see any conflict as a result of this change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If0eabffbdb750db02866c1aa2b29b0c89fab1040
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is fail during install using vm_setup.sh:
Error: Failed to synchronize cache for repo 'AppStream'
adding yum update on instalation begining fix this issue.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I92a3298d332ffe94c63a4f007e480a0c4d529b00
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Allow to run fio bdev plugin with attached virtio
devices. This might allow to get better performance
results when running performance tests.
Fio is not run in client-server mode due to problems
experienced when running fio plugin that way.
These changes are not generic and will not work
in the CI out of the box. New VM image must be crafted
in order to run fio in this mode. VM must have compiled
SPDK and FIO binary already in place.
Change-Id: I2e957e1e3a573cc899fcfbe5918193e1af6a9a63
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also update the so minor version. Apparently spdk_bdev_module_list_find
was not declared global even though it matches the spdk_* regex for the
generic spdk map file. My guess is this is because it isn't actually
used in any file other than bdev.c even though it is declared in
include/bdev_module.h
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I5c4e9ed06130e5d1dcc7235b5c2588f7b98a3ab3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
I reversed the arguments to abidiff when I first submitted
this test which was causing additions to be reported as removals
and vice versa.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iac50243f7cda7c1f9c2302af13a34eca844e0689
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1705
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test helps ensure that nothing about the way we build our shared
objects changes in a way that breaks external applications or bdev
modules trying to link to SPDK.
Change-Id: I45ac36a2afc873b04eb237f4e633a9d84066737c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/435
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Both for SCSI IO task and management task, append and execute
operations bad bbeen separated into different functions.
Append operation was for LUN reset, and separating into two different
functions was for clarification and readability.
LUN reset is sufficiently stable now.
Merging append and execute SCSI task into a single function is good
as API and enables us to do optimization.
For SCSI management task, merge spdk_scsi_lun_append_mgmt_task into
spdk_scsi_lun_execute_mgmt_task() simply.
For SCSI IO task, merge spdk_scsi_lun_append_task into
spdk_scsi_lun_execute_task() and do a small optimization.
The refined spdk_scsi_lun_execute_task() adds the IO task to the
pending list if there is any pending management task, executes all
existing penging IO tasks first and then the IO task if there is any
pending IO task, or executes the IO task directly otherwise.
Update unit test accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I26ffc4f4f62747d8cdecb90690f26cd58a9c17f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the following patches to optimize task
submission and remove the spdk_prefix from internal or private
functions.
To avoid using double underscores as the prefix of the function name,
separate pending task check and outstanding task check into
different functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieda54507bf4c781b60fa05d03cd32ca25948e430
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1826
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This accomplishes a couple of things:
1. Now we don't perform these checks every single time
we source autotest_common.sh (some 140 times)
2. We have some flexibility in changing parameters either
during a test or when trying to do a specific compilation
and calling this function to get the updated parameters.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibbe2dc9113a56f651d41216e8557708824652442
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1784
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is for the sheer convenience and cleanup purposes.
Change-Id: I526c4fb682eef94fbfae20b1d5a03dcf325ff647
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If return is called without specifying the exit status while being
used in the trap context, it inherits the exit status code from the
last cmd that triggered the errexit (i.e. the cmd which was run right
before the trap). In this particular case it may be quite unexpected
since return is called after successful execution of the modprobe,
implying the overal success of the function. However, as set -e is
called right before return, the function returns with a != 0.
To avoid this behavior, explicitly return from the function with 0.
Change-Id: I8b21e7aa6cd5628f14b66e559d05b4d0a20e2050
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
This unit test shows how the guest and host handle
the shared packed vring.
Change-Id: I4d02a22a225a7945bfe4a2691d917adae86661d6
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move code like nvme_cfg and clean_nvme
to a new file - test/ocf/common.sh
Change-Id: Ife00cd979857ce69949ce9c9d9ad0b5581bb382b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that we are switching to json config,
metadata takes priority at startup,
which can result in test failure because
some devices were created from metadata.
This patch uses clear_nvme() - the same function
that is used in test/ocf/management/persistent-metadata.sh
It is factored out in following patch.
This patch fixes issue #1287
Change-Id: I16d40d0c1586a970c30761c0e1a81445621a419d
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the size of input buffer is larger than 16 and not divisible
by 16, the final line will keep part of the characters of the last
line. For example, if I want to dump "spdk dump 16 more chars",the
output is:
00000000 "hexadecimal" spdk dump 16 mor
00000010 "hexadecimal" e charsmp 16 mor
But the correct should be:
00000000 "hexadecimal" spdk dump 16 mor
00000010 "hexadecimal" e chars
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Iaf3f33c5ce68920ada83c59277f89a547e8030d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should be giving completions for all requests when we destroy a qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I802f5120f2e8289aa825872f8085ac21b5fce0f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Keep it all in one place to make it easier to see.
Change-Id: I8c2cc1b5da8ce431d7b1b5546440324db169e09c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Only called from one place.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I34a9d29d4a45df08ecf168c12bd28e358ed6ff18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1508
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It's only called from one spot.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I60ecc3c9763faed6d7f3dbc8de5bf63d478d70ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Only called one place.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I8e8edf4e7a36a2e953b0856a1849e86dc015a5c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This simplifies the initialization to only a single pass through all
cores.
Change-Id: I6fa8fec90d131f0fd9544ef8548daac52465691a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make some refactoring later a bit clearer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iae2c36d1c298377cd20cf3226b3b8dfe712484ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For RDMA, it seems we may have to wait out some timeouts to
reset all of the connections to make this test work reliably. Instead,
just restart the target for each test.
If there's a way to force close all of the connections properly in the
future we can go back to running these all on a single target.
Change-Id: If79257349007765dc16bacebf810312a025d70a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1609
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This function exposes assoc array which consits of fields extracted
out of the parsed jq output.
Change-Id: I189c5c01e6efd60d6f2010df90093920a5d37690
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If this function fails due to, e.g. modprobe not being able to unload
kernel modules, the errexit will prevent nvmftestfini() from killing
target applications.
Avoid this scenario by ignoring nvmfcleanup()'s es when called from
nvmftestfini().
Change-Id: I3a05261f71d3dcc6ed06f786b4cc1988fd733ffc
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: Broadcom CI
If, e.g., the rpc call fails the remaining parts of the function
won't be called, resulting in lingering processes tainting the
testing environment.
Avoid the above scenario by intercepting single es from the entire
list.
Change-Id: Ie591935a3d868a1efa2890d1bb14776b0bdb6620
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1356
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
NVMe ctrlr init state machine shall be async whenever possible so it
is not blocking other code from processing. It can result in deadlock
when cmd producer and consumer are sharing the same thread.
This patch is making identify active ns async by introducing new
state to wait for completions.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I346d35bab4733d3941e023602854fdd5b1ef23b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
It is a prework for changes related to ctrlr init state machine.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If289580f65ae27468b659a7ea07a4e4298876e77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Remove SPDK_BUILD_PACKAGE flag, since it was not set
on any of the CI jobs. The default value "0" was always used.
Only indicator whether second part of the script executed,
was handled by RUN_NIGHTLY flag.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1c5a660ed86bb520972c630118f8499966bdb6d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1607
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Lack of this initialization cause compilation error on release builds.
bdev_raid_ut.c: In function ‘test_multi_raid_with_io’:
bdev_raid_ut.c:2007:3: error: ‘ch_ctx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2007 | verify_io(bdev_io, g_max_base_drives, ch_ctx, pbdev,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2008 | g_child_io_status_flag);
| ~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2221aa1d78d640439d5876a781a0d173a370e2a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch creates a test case to simulate nested I/O channels by
generic bdev layer and bdev modules. The nested level of I/O
channels is two at a maximum now but the nested level of the test
case is three.
Besides, any poller registered on the nested I/O channel is not
visible to the upper layer. So include such pollers into the test
case.
By combining thread termination, test the fix for the github issue
is correct.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6a04d753e462cdaba7364678b5118c45b09708ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Set 5 seconds timeout to wait until exiting thread is exited into
spdk_thread_poll(). After the timeout, collect error log and then
move the thread to exited forcefully.
Add necessary unit test case accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied8f58a2023a3bbe098530810fd3288bef93c3e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extract _spdk_thread_exit() from spdk_thread_exit() and
_spdk_thread_poll() calls _spdk_thread_exit() if the thread is in
the exiting state. spdk_thread_exit() changes to move the state to
the exiting state. The spdk_thread_poll() loop will end after the
thread moves to the exited state because the caller of
spdk_thread_poll() will check if the thread is in the exited state,
and break the loop if true.
If the user does not call spdk_thread_exit() explicitly, the reactor
has to terminate all existing threads at its shutdown. In this case,
multiple threads may have some dependency to release I/O channels or
unregister pollers. So the reactor has the large two loops, the first
loop calls spdk_thread_exit() on all threads, the second loop calls
spdk_thread_destroy() if exited or spdk_thread_poll() otherwise for
each thread until all threads are destroyed.
Besides, change the return value of spdk_thread_exit() to return
always 0. Keep it for ABI compatibility. Change ERRLOG to INFOLOG
for _spdk_thread_exit() because it is called repeatedly now. Remove
the check of I/O reference count from _spdk_thread_exit() because
_free_thread() cannot free I/O channel. Refine the unit test
accordingly.
Fixes issue #1288.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee5fb984a96bfac53110fe991dd994ded31dffa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In show_blob(), value_len of xattr contains terminator '\0',
which is printed as '.' when calling spdk_log_dump().
For example, we set key/value pair as <key1,xattr value>, we get
"xattr value." but not "xattr value" when showing blob info.
Skip '\0' will fix this.
And "data[BUFSIZE]" seems redundant here, remove it.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I4e7c3276e51f14badf43b660b80b24ae85bb0900
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Compiling with warning:
nvme_poll_group_ut.c: In function ‘test_spdk_nvme_poll_group_add_remove’:
nvme_poll_group_ut.c:268:8: warning: ‘tgroup’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
qpair = STAILQ_FIRST(&tgroup->active_qpairs);
tgroup may can't be initialized as:
if (tmp_tgroup->transport == &t1) {
tgroup = tmp_tgroup;
} else {
CU_ASSERT(STAILQ_EMPTY(&tmp_tgroup->active_qpairs));
}
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Id915e651f73ca3814a7e8d3f95c8793b8b880990
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1738
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
fix#1: fix issue when setting outstanding bit array
In the case where spdk_bit_array_get() is false after selecting
an offset, we'd fail to set the outstanding bit in the array for
that location based as it was included inside of the conditional
that would have us try another. Switched the logic up to avoid
needing a second check on g_verify.
fix#2: fix offset_in_ios to be relative with the range of the job
offset_in_ios was absolute but size of bit map array was the
range of the job. The comment in the source file said it was
relative, but did not match the code.
Change offset_in_ios to be relative with the range of the
job and use it for spdk_bit_array_set, spdk_bit_array_get, and
spdk_bit_array_clear.
fix#3: fix bit was not cleared when submission failed
When bdevperf_submit_task() failed to submit, the corresponding
bit was not cleared from job->outstanding.
fix#4: fix bit was not cleared when submitted I/O failed.
bdevperf_complete() had cleared bit only if the I/O succeeded.
This bug is apparaent only when -C option is enabled.
fixes issue #1329
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5b7e1d0b2e489b807906a94ed5d05da65067e6ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
perf/common.sh uses autotest's common tooling which depends on this
variable to be set. Without it, execution of the run_perf.sh simply
fails.
Change-Id: Ib68d565b1d38c80df3d3f1a09f5fa7bef6eaaffd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This commit combines a couple of small optimizations to
help make the unittest scan-build checks more comprehensive
while not taking extra time to compile examples when we are
doing functional tests that don't require them.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1d3af0026b4be6e799516ef52e9414790eab85e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Parted is not installed in the system by default and
is needed by number of spdk tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5d8628be2e328d528a8aa47a8084d33fbb63b187
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose of this flag is sketchy at best.
Failing tests should be either fixed or disabled/removed.
Running separate job in hopes of it fixing itself,
might not bring the expected outcome.
Case in point - test case in this patch
was added to this flag over a year ago.
This is last remaining test case under this flag.
So there is no need for it to exist.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8481ac7102245889047dde083b34276d22271a03
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the caller had to check if thread is not exited when
it calls spdk_thread_exit().
Subsequent patches will change return type of spdk_thread_exit()
to void, and so include the check int spdk_thread_exit() in this
patch.
If spdk_thread_exit() is called when the thread is already exited,
collect INFOLOG and return normally.
This will make the next patch a little easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8b94261575e770485b33c0b37e76e770b77b417c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently nvme_completion_poll_status object is allocated using
malloc, so it may cotnain some garbage. In some scenarious
nvme_completion_poll_cb can be triggered before we enter
spdk_nvme_wait_for_completion_*. In that case status object
will be freed by nvme_completion_poll_cb if it contains a
garbage in `timed_out` field. Later spdk_nvme_wait_for_completion
will work with already freed memory.
Fix - allocate nvme_completion_poll_status object using
calloc and explicitly zerofy it before usage
Fixes#1292
Change-Id: Iac39653a6cd102471de16e65814f0760bbeda7d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There are tests which create a filesystem on a device.
Each one could use a timeout and retries for each mkfs.
Otherwise following error could appear due to not test
related system activities:
'mkfs.xfs: cannot open /dev/sdb1: Device or resource busy'
References #1141
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7307b085ada42200995d8bd2fcfd0469ee60a732
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1178
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Since we have OCF as a submodule, we do not need to
install it separately.
vm_setup.sh was used to install dependencies for testing SPDK,
so remove all references to OCF in the vm_setup.sh.
This is related to issue #1279
Change-Id: I616dd6e72101c78c6902603ef077eb7992809ab9
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1496
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
`-r` command line param in SPDK won't accept a TCP port soon.
Instead, we can make SPDK listen on a unix domain socket, then
expose the socket on a TCP port using socat.
Change-Id: Iea52a5f21d845eac6888d343ce03c7e7caf19617
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
That test used to call an inexistent function in its
ERR trap. That's for one. Second, none of the SPDK tests
should set the ERR trap themselves - it's set once in
autotest_common.sh and prints the backtrace. What test
scripts should do is setting SIGINT/EXIT traps - fix it now.
Change-Id: I46c82651be78eeaec16ac52396c5e80a0405e5ff
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
%*s prints at least * characters and may add padding to the string.
%.*s prints at most * characters.
In a few places we used the first instead of the second and
printed some garbage to screen (in the best case...).
Change-Id: I97a862be61a5e43aa61e8230044dbd64a9db33bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There's a small error when building rocksdb in blobfs db_bench
with gcc9:
"strncpy output truncated before terminating nul copying as many
bytes from a string as its length [-Werror=stringop-truncation]"
It's not a real bug for in the code "strncpy" truncates the null
terminator but set it later, which has been reported here:
https://github.com/facebook/rocksdb/issues/4017
Just adding "-Wno-error=stringop-truncation" to silent the compiler.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I95993605f0376f5c101fb487596721b384319bcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SPDK thread library in unit tests for compress bdev. This will
enable us to write unit tests for refactoring.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac3867cca460b998c9b3953aae5241ffddc3168b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When using --local acutally wait for fio processes
to finish and then gather results back to the host
system.
--local allows to run independent fio instances
on guest systems, avoiding fio client-server mode.
This will come in handy when trying to run fio bdev
plugin with virtio bdevs in guest systems.
At the moment fio plugin does not work in client-
server mode, so "local" must be used"
Change-Id: I2020c1b636fbf4ab1fe8ef590639e0dbfd905414
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1533
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
