This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic5c128244699c1a47275145ca7e41aa5f1366259
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3044
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch paves the way for introducing a tailq containing
multiple alternative paths to the same controller.
Change-Id: I13d30c12b8e0ce38eae687f9e76740be1d11e4d1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3259
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Cache size of mempool is not based on SPDK thread but DPDK thread,
i.e. CPU core. So replace spdk_thread_get_count() by
spdk_env_get_core_count() to determine cache size of mempool in
spdk_bdev_initialize().
Besides, allocate and free stub cores at the corresponding unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc4deae84c74820af4de61e991fa3f8683add058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Using not FAILED but ABORTED for the completion status of the I/Os
aborted by reset will be reasonable and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c8181dd33453a330888cffa93505e6fc462f278
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The last patch ensures that the parent I/O terminate with failure
before continuing splitting process if one of child I/O failed.
This simplifies abort operation for I/O splitting.
Then we can use bdev_abort() and bdev_abort_io() nestedly.
Add necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I562bb6675f1fa380bc53dbe369138317ead66fe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Previously, bdev_io_split_done() had continued splitting process
even if the status became failed. To abort split I/O, this patch
changes bdev_io_split_done() to terminate with failure before
continuing splitting process if the status became failed. Add
necessary unit test together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifd1ea49c22523e8c06fb45ebdcb2c84a57afd2ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2234
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to abort split I/Os. To abort any I/O by
bio_cb_arg, they have to be managed by the submitted I/O list.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9459d9d2d3511aad0325dcc20d88610444a4ea04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the target I/O is controlled by QoS, the abort request is
submitted on the same channel that the target I/O is submitted.
By using this, add a helper function bdev_abort_queued_io(), and
change _bdev_io_submit() to call bdev_abort_queued_io(), and
call _bdev_io_complete_in_submit() with success if bdev_abort_queued_io()
returned true when QoS is enabled on the corresponding channel.
Add necessary unit test together.
Update unit test accordingly, especially, update stub_submit_request()
to abort the matched I/O, update io_during_io_done() because we need to
know not boolean but the exact completion status now, and update
basic_qos() to reset the rate limit to test the abort I/O feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ca21e7c32cabfdce5d0e5c27a8af8bb00f11c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no point in setting this value on submission
and changing it on callback.
Since it is based on blob bserrno.
lvol_task is removed in next patch.
This change was motivated by lvol_op_comp() accessing
the task->status pointer on hot path for I/O.
There is no need to do so, so just pass status.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I17461fcf355f771f4de4e6d5ec1900d5042bd3d5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1804
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The UT stubs weren't calling the assigned callbacks
and some weren't assering the passed values.
This will come in handy in next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I86eec58a28e40a93ff06b7e7c715c17d25e28818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1970
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Lack of this initialization cause compilation error on release builds.
bdev_raid_ut.c: In function ‘test_multi_raid_with_io’:
bdev_raid_ut.c:2007:3: error: ‘ch_ctx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2007 | verify_io(bdev_io, g_max_base_drives, ch_ctx, pbdev,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2008 | g_child_io_status_flag);
| ~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2221aa1d78d640439d5876a781a0d173a370e2a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SPDK thread library in unit tests for compress bdev. This will
enable us to write unit tests for refactoring.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac3867cca460b998c9b3953aae5241ffddc3168b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.
This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.
This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930
lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.
Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that a namespace can be depulated asynchronously now, the NVMe bdev
module should also be finalized asynchronously, after all namespaces and
controllers are deallocated.
Change-Id: Ic082fec8e31e9bd5ee1c698cd8dfca9f248776d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch adds the ability for a namespace to be depopulated
asynchronously. Currently both regular NVMe namespaces, as well as the
OCSSD ones are depopulated synchronously, but it'll be changed in the
upcoming patches.
The nvme_bdev_ctrlr.ref is now not only tracking the number of bdevs
created on that controller, but also the number of populated namespaces.
Change-Id: I7b112d9b0d41739f3dc7d427e9da340843128c54
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add raid5 module and unit tests. Use './configure' with option
'--with-raid5' to enable it.
Change-Id: I9f07da8c3567fa65499444899c899adaa2e29550
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/855
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: Ib95e8d190bd87158ae1ecc6698da95ccc4ba9579
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/992
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To make room for other raid module unit tests.
Change-Id: Icf8b8ff0c9051ccb4c7ebd784807370f8be1a8fb
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/853
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use new bdev aux buf feature. Huge performance benefit for writes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5a27460a369ef5f13bf490a287603e566071be41
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478384
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Changed write function to be able to work in zone append mode.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I3af98f1d8e69eac6922e19addebabbc6ce847c63
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Handle finish zone management function to zoned block vbdev
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iffe24572609e741a79b6bb92f72b56cede4906ca
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Handle close zone management function to zoned vbdev
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I001e25a157ba738724012ca366ef901016733944
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added handling of reads to a zone; blocks outside of a write pointer
are zeroed out.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: Iaf60d6ff74caf9831998862e048446ccd0a0fa3f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added handling of write commands, including zone state changes and write
pointer updates.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I576ca18b52474bb299c20296a7561f25e5afa85b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468037
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Add handling of two of the zone management commands for vbdev.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I2868a96d15acbc2d13d18dea405b6d98cb4573d6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
For the latest QAT devices there are 3 CPMs each with 16 VFs and
2 qp each VF. To load balance for multi-thread operations we want
to assign each new queue pair (QP) on a per CPM (processing module)
basis so this patch assigns the next QP, for QAT, by taking the
last + 32 modulo the total number of QP. This will results in each new
channel getting a QP on the next CPM.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Iea608ada68517b6f2faecd45701c7aae6d23a2d0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477082
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Previously one global list of device/qp combinations was used
regardless of PMD and when assigned, the device name was checked
to make sure a matching one was pulled from the list.
Later in this series a patch will make use of having different
lists as we discovered a decent way to load balance QAT but the
implementation with all PMDs on one list was too complex.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I54dfbd0206a881d126831ba27a4ae05cdc6f7c11
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477152
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added handling of get zone info command
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I2d80885af83345c945af22a46a41abf55e1eb413
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468036
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added zone specific information during initialization (starting LBA,
capacity etc.)
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: If0599960f0f872117691c801dce497649da20da6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unify function names and memory handling for create/delete rpc mock
functions in unit test for block zone bdev.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ib8613a78623279447cd5a6b9cf0c686e15b69d32
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479644
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are unit tests for non emulated version of
spdk_bdev_comparev_blocks function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I459ac614e1a03e42b9d584aaa907a1448a13d16e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478969
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Upcoming patch will use most of the comparev test code
so let's reuse it.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibc6230d38da224bfcf25f76fe1d834d48200bfd9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479832
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
