Add -a cli parameter to enable warmup stage.
Move ns_ctx statistics-related variable to a new structure
for easier cleanup.
Change-Id: Id536209bc49322f1bc9b5c2296f98f0183b7d4b9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When using nvme perf program to test against NVME-oF target,
the nvme perf program will hang if we kill the NVMe-oF target.
For example, if we run the following command:
1 On the target side, start a SPDK NVMe-oF target;
2 On the initiator side, we run:
./build/examples/perf -r 'trtype:rdma adrfam:IPv4 traddr:192.168.7.55 trsvcid:4420' -q 128
-o 4096 -w randwrite -t 100
3 Then we kill the NVMe-oF target on the target, the nvme perf program
will hang.
For NVMe perf program, I think that we should check it in
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia864394acdb6e705484dd0db6f015b567eb527a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3774
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes implementation of VPP socket abstraction
along with ways to compile it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I089f7703cfc4fb517f8f80f4368e544bced549b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This flag only works for local device. If the device from the kernel
is getting from remote (e.g., /dev/nvme2n1 is from NVMe-oF target),
then it will not work for those kernel devices while using
IORING_SETUP_IOPOLL flag.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide396de9f53b884c4d12af64693293d57fac9523
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3531
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add a new sample application to test I/O abort for NVMe backend,
both PCIe and over Fabrics. And enable it to test pool by NVMe-oF
+ delay bdev + malloc bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5aa28b523bdb2c1d4d8c7af05f925c4dd01dda86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2661
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch will add the uring support to test kernel based
local devices, e.g., files or local NVMe devices.
To make one binary can support both uring and aio mode when --with-uring
is complied. We also introduce a new global variable g_use_uring to switch
the mode to use liburing or libaio.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I72851168cb377751313d7aa09040ef2a7eb76594
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3214
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We must include nvme.libtest.mk first, because
OS variable is defined in spdk.common.mk referened in
nvme.libtest.mk.
Without this patch, AIO library will not be compiled
because OS variable is NULL.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I760310ab80252237d211a855d18d80ed88119a43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3217
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are anbormal cases, from callocated nvme qpairs until
connect io qpairs successfully .
We should free these resources when abnormal exit, and codes
just return there.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I08de9c1fe1757a11a118ebedc326d81e2c68b077
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_nvme_ns_get_extended_sector_size() is same with
spdk_nvme_ns_get_sector_size() if the drive wasn't
formatted to extended LBA format, but if the drive
was using extended LBA format, it will cause error
without this patch.
Change-Id: Ie845453949c65a9f1d1370227fe3363648f0d0d9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2934
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There are many log prints such as:
Controller INTEL SSDPF2KX012TZ (PHAC0016001N1P2EGN ): Skipping inactive NS 0
Controller INTEL SSDPF2KX012TZ (PHAC0016001N1P2EGN ): Skipping inactive NS 0
for inactive namespaces, so here we just register active namespaces for tests.
Change-Id: Idbb89c4e5610b4c725dbc211acaefd1897cceeb5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2933
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will open up the way for probing and connecting to
all of the namespaces on a pci controller.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8fa3dde9f249ce826659882e66f630b8c25e2701
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2779
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
I think the main point of having unused qpairs in
the perf application is to simulate the performance
drag of having active qpairs sitting idle on an application.
If we don't poll these unused I/O qpairs, there is no real performance
effect (in terms of cache evictions, wasted cycles or otherwise).
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie67223eae57a9bfbfaa703a401b0960f88552e11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We only enable this feature for READ commands in the NVMe driver, so
also ignore the WRITE commands in fio plugin tool.
Change-Id: Iecf43326e1a2a3b3540a1391e09a33d2443bd546
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This only covered one test case for NVMe reservation feature, so remove
it to test directory.
Change-Id: I7920679ce14dd4d6a9164cb7663016bc7a3a4929
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When testing the application, after release the reservation, the
registrant is still there, so we need to unregister the registrant
at last to restore the drive to a clean state.
Also set the CPTPL to 10b, it means Reservations are released
and registrants are cleared on a power on, we will move the tool
to test/nvme directory in following patch as this is only one
test case for NVMe reservation feature.
Change-Id: I271a61985940958b9f36887f9cd97841841ba2d6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
current_queue_depth should have been incremented only if I/O submission
succeeded.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibdcae2d4e8d5b804faaac2392226252c95dfb634
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2586
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The capacity is calculated without single block size.
Correct the calculation.
Change-Id: I039e4dbdfc00f5d29148efc2c2a553535b7daf70
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2367
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Recent CMB changes disable using the CMB copy and submission queue
at the same time, so disable use_cmb_sqs by default.
Also spdk_nvme_ctrlr_map_cmb() changed the "size" parameter used as
size of buffer that was mapped, so change it here too.
Change-Id: If957674042b7f4a08e272bf5f9f2ee29f50805cb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1955
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the purpose to enable the stress test with Bit Bucket SGL,
here we added one new parameters: "bit_bucket_data_len".
For testing it, user should set "enable_sgl=1" and
"bit_bucket_data_len=4096". This means total 4096 Bytes of
data will be described by Bit Bucket SGL, note that the value
should be less than block size specified in the fio command
line.
We will count the Bit Bucket data from the beginning of each
I/O for simplification.
Currently it's only valid for READ test. User can see the
performance improvement when enabled the Bit Bucket.
Change-Id: Ia481a324c25942d6ca051c71cb90f87d21955259
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Commit 8c1d107 added a new erase API and renamed the original
API with "secure_" prefix according to the specification, as the
secure one will not cryptographically erase user data, due to
the limitation from the drive, only the secure API can be
supported, so changing the caller to use the original again.
Change-Id: I25cb054e728065d9ae9c6c30aa0ab374d60cf6f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In spdk_fio_setup when the connections are too many,
for example 16 subsystems, it would take too much time to
complete the probe. And it takes the mutex that makes the
poll_ctrlr function can't send the keep alive cmd which
causes the target timeout. Split the mutex so the poll_ctrlr
has the chance to sent keep alive.
Fixes issue: #1286
Change-Id: I300513b5e8761d9eaadb4c5cbc8ed97fe84d02df
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1407
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Actually we can just use one API to finish the requirement.
Change-Id: Ia0d3d589755e8c92f636d3d090ec642299511401
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The APIs even don't have a chance to be called if the drive can't
support OPAL feature, so just remove the NULL check, and we will
store level 0 discovery descriptors after initialization, so
spdk_opal_cmd_scan() isn't necessary here, remove it as well.
Change-Id: I24f12f2c352996d9ebe76dc015cd0b7502798359
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The macro is defined by the spec, so place this value to where
it should belong.
Change-Id: I23f91662fd4ab279aa4285212fc8cbd2ed42245b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No actual logic change except re-define some data structures.
Change-Id: Id0a483071591beee675cbc3ef368ac1fb723cfe0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently an option is implemented to monitor a correlation between the
core and namespace.
Previously:
==================================================================
Device Information
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0:
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0:
==================================================================
Now:
========================================================================
Device Information
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) NSID 1 from core 0:
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) NSID 2 from core 0:
========================================================================
Signed-off-by: Alla Kiseleva <c_allaki@mellanox.com>
Change-Id: I35e39c62bbdac05152f35e11eb1d560eb0e50404
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/955
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These parameters can be enabled using -A (ack_timeout) and
-R (retry_count) cli options
Change-Id: I0c262f93c664a69aa952d6926fd7b0d02acf9e30
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
On newer versions of FIO, there is an issue with heavy verify workloads
where one of the headers (rand_seed) gets incorrectly generated by fio
during verify. This can be circumvented by using the verify_backlog
flag.
This is needed because it will enable testing this workload on the tcp
transport using fio in the SPDK test pool.
Change-Id: I028be3fdb72a76733b4226a37b6332cd45d0f774
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Meanwhile, checking new gerrit for committing a new patch.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I33c0f5bf5b13a147777a9831c9c6e6079b90590f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Make the two non-global conf variables global (this will be needed when
we switch to the app framework) and only assign globals with an initial
value if that value is Non-zero.
Change-Id: I141c32cb2eb614861f62ec6a7662252a33a101ec
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is preparatory to switching the application over to using the app
framework which will require us to avoid any overlap between the app arg
string and the other arg string.
Change-Id: I692d4ec9d078acfc4c28aa7b0f40c0acd7c8af12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
the workload parsing didn't need to be that complex.
Change-Id: I28627a430834eb48a7c3921ac655d80e348c66ea
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
