Use 20.04 reference build instead of 20.01.
Also updatethe NVMe-oF Makefile to reflect a change to the
ABI since 20.04 was released. This has to be done in the same
patch to keep the build from failing.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3201f698ecb441021964debda760866dbbc01a64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In SPDK NVMe/TCP target, when initializing the socket, the low
watermark is set to sizeof(struct spdk_nvme_tcp_common_pdu_hdr),
which is 24 bytes. In our testing, some times there might be very
small data packet (as small as 16 bytes) be sent to wire. After
this, if there is no more data sent to the same socket, this small
data packet won’t be received by NVMe/TCP controller qpair thread
because the size hasn’t reached the low watermark. Because of this,
the qpair thread is waiting for more data come in and the initiator
is waiting for the IO request to be completed. Hence the delay
happens.
As the minimum data that allows target to determine the PDU type is
sizeof(struct spdk_nvme_tcp_common_pdu_hdr), which is 8 bytes, we
changed low watermark setting as below. With the change, the problem
was gone immediately.
Change-Id: I14ccc4c84b77e33a617726e7455304aca29d5d57
Signed-off-by: Wenhua Liu <liuw@vmware.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2138
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Useful for transport specific layer to inform that Keep Alive is not
supported or to adjust granularity.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I636fda3eadcb96cd8a4b79570fc4e3cc6a58fe93
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Hit assert when completion is done is response to internal connect
cmd. Fix by outstanding counter incr, add missing err handling.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2ba71f83432831fc043f2b6f6a5cba024045068b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1902
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This also lets us get rid of the set_ibv_state function
since rdma_disconnect does the transition to the error
state for us.
rdma_disconnect triggers an RDMA_CM_EVENT_DISCONNECT on the
initiator side. This is important so we know when qpair ids
can be reused on the initiator side.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I87b80797c84ffa1d2cbe94cf37316b1b674b6c74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1878
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As soon as we disconnect the qpair, the initiator can submit an
additional request to connect a qpair with the same qid as the
one we connected.
This series is aimed at making sure we don't acknowledge a disconnect
until we have cleared that bit.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I76d9312448a9740911465c146a195996cc567370
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1880
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Historically, we have immediately called the qpair
fini function directly from _spdk_nvmf_qpair_destroy.
However, to fix a race with initiators where we can get
a duplicate QID from the initiator, we will have to clear
the QID bit before calling qpair_fini. Clearing the QID bit
must be done on the controller thread, so we have to pass at
least two messages between calling _spdk_nvmf_qpair_destroy
and qpair_fini. This leaves a gap where we can poll the poll group
and reap completions for the qpair before we call qpair_fini and drain
all of the requests related with the qpair.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I337a0608f88fdda132b8a629a508c0263d2261c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
The code used to do this but it was removed when the buffering was
shifted down to the posix layer. Add a way for users of sockets
to still properly size the buffers.
This also means that by default, the receive buffering is not enabled
on sockets. That matches the behavior of the previous release.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I20ce875be2efd841fe3a900047b4655a317d7799
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1560
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's actually faster to process them until you run out of data.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9e81babdb9bdc405a8dbf03b2f701fe50bcc70f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1559
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add FC listen address to target listeners table before attaching the
same to the subsystem listener list. Without this fix, subsystem allow
any listener provision which is very important to FC-NVMe is broken.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: I06436c0a73e65cb5f7bb3280658fcf200b975989
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1443
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently SPDK rejects Connect command when subsystem is not active.
This change allows to queue Connect command and execute it when
the subsystem goes back to active state. To queue the command we
should know subsystem_poll_group, in current implementation
this poll_group is known only when controller is already created.
To get the poll_group for Connect command we can retrive subsystem
subnqn, find subsystem and get poll_group by subsystem->id.
Increment subsystem_poll_group->io_outstanding even for Connect
cmd in order to prevent subsystem change state during the
connection process. Update spdk_nvmf_request_complete -
decrement io_outstanding for Connect cmd.
Fixes#1256
Change-Id: I724abb911696d7234a9c9d27458eba24739b26fd
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1273
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We callocated the listener, but if we to execute the listening
behaviors which got failed, and all the other resources have been released,
only left listener.
Fixes issue #1326.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I020b509caed79e9880d07b01888ed389630ff67f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_jsonrpc_begin_result() was changed to always return non-NULL
a while ago. Most of the checks were removed from SPDK, but this
one must have been omitted because to its unusual structure.
Change-Id: If305d7a27d8e6bd4dae1aa8221efabba50db1982
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
the nvme, nvmf, and thread libraries have all had public APIs
removed or changed since the API was changed to 2.0 and
backported to 20.01.1 we should rev these so versions to make
that distinction obvious.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Id48454b8d0451794abad4db452b5c4e337b23c0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The previous patch ce6b8a1313
added a wrong assumption that every WC of RDMA_WR_TYPE_DATA
type must point to rdma_req with IBV_WC_RDMA_READ opcode since
RDMA_WRITE operations are non-signaled. However it is wrong
since in the case of error all WRs will have WCs. Revert part
of the problematic patch.
Change-Id: I8d270c5313ebfe1ec44a338820a62f085996eb8f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1334
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The current implementation doesn't log WC status. Remove independent
logs by WR type, use common error log. Besides that add a minor cleanup
in checking of WC opcode for RDMA_WR_TYPE_DATA type - it is always
RDMA_READ
Change-Id: Ifdfc295e804ab3246ec54327afc8a5a37aca1d55
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1160
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit ea5ad0b286.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I333bdf325848e726ab82a9e6916e1bbdcd34009c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit d50736776c.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I7cf477333f2a3fa4a0089394d5fa28142b262a7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 5e7b8d18f3.
This code is moving from the nvmf target down into the posix
sock layer in this series.
Change-Id: Iea9a7cef5bedd6a34edf7b4c87825897279829c3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It was probably miss-interpretation of description from discovery log
page which refers to min admin max sq size.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I575bf7fd6beb904b3a38a07616b76a34f8365643
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
subsystems
This is optional and most transports will not implement it.
Change-Id: I51e0f1289b0e61a8bdb9a719e0a2aae51ecb451c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix Segmentation fault on the target side.
Issue:
rdma.c:2752:spdk_nvmf_rdma_listen: *NOTICE*: *** NVMe/RDMA Target Listening on 192.168.35.11 port 4420 ***
rdma.c: 789:nvmf_rdma_resources_create: *ERROR*: Unable to allocate sufficient memory for RDMA queue.
rdma.c:3385:spdk_nvmf_rdma_poll_group_create: *ERROR*: Unable to allocate resources for shared receive queue.
Segmentation fault (core dumped)
GDB:
Program terminated with signal 11, Segmentation fault.
736 if (resources->cmds_mr) {
(gdb) bt
736 if (resources->cmds_mr) {
(gdb) bt
0 nvmf_rdma_resources_destroy (resources=0x0) at rdma.c:736
1 0x0000000000497516 in spdk_nvmf_rdma_poll_group_destroy (group=group@entry=0x2fe1300) at rdma.c:3489
2 0x00000000004978bb in spdk_nvmf_rdma_poll_group_create (transport=0x2fe11d0) at rdma.c:3371
3 0x000000000048df70 in spdk_nvmf_transport_poll_group_create (transport=0x2fe11d0) at transport.c:267
4 0x000000000048a450 in spdk_nvmf_poll_group_add_transport (group=0x2f49af0, transport=<optimized out>) at nvmf.c:941
5 0x000000000048a6cb in spdk_nvmf_tgt_create_poll_group (io_device=0x2fce600, ctx_buf=0x2f49af0) at nvmf.c:122
6 0x00000000004a0492 in spdk_get_io_channel (io_device=0x2fce600) at thread.c:1324
7 0x000000000048a0e9 in spdk_nvmf_poll_group_create (tgt=<optimized out>) at nvmf.c:723
8 0x000000000047f230 in nvmf_tgt_create_poll_group (ctx=<optimized out>) at nvmf_tgt.c:356
9 0x000000000049f92b in spdk_on_thread (ctx=0x2f81b20) at thread.c:1065
10 0x000000000049f17d in _spdk_msg_queue_run_batch (max_msgs=<optimized out>, thread=0x1e67e90) at thread.c:554
11 spdk_thread_poll (thread=thread@entry=0x1e67e90, max_msgs=max_msgs@entry=0, now=now@entry=947267017376702) at thread.c:623
12 0x000000000049af86 in _spdk_reactor_run (arg=0x1e678c0) at reactor.c:342
13 0x000000000049b3a9 in spdk_reactors_start () at reactor.c:448
14 0x0000000000499a00 in spdk_app_start (opts=opts@entry=0x7ffc2a5e0ce0, start_fn=start_fn@entry=0x40aa80 <nvmf_tgt_started>,
arg1=arg1@entry=0x0) at app.c:690
15 0x0000000000408237 in main (argc=5, argv=0x7ffc2a5e0e98) at nvmf_main.c:75
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Id9bf081964d0cf3575757e80fc7582b80776d554
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1073
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To avoid the strange formatting, typedef has been used. But this
comment is hard to get the meaning. So stop breaking after return
type for this case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia03d6ec50610c395007fe172018b890733dce599
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is a warning triggered when holding ref to const obj and passing
to these getters.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2c7b4ea0d325d84d66923fc524273ea44a3a311b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the spec, if the CC.EN bit is transitioned from 1 to 0,
then all of the I/O qpairs shall be disconnected and the csts.rdy bit
shall be set to zero.
Change-Id: I871170e79e08a9fab8286f9c135c7b3316f58ace
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a way for the transport to query the value of the controller
registers.
Change-Id: Id365ff088989f6f8e74e26ff6f3d435f35bee2f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The first 4 or last 4 bytes of an 8 byte property can now
be written independently.
Change-Id: I894f8349be836511c18c380262eae46951060766
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It is memory optimisation as transport id is 'heavy'. As a side effect
simpler handling of listen and stop_listen on transport specific layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4e9d0e0c5eee2d570ec4ac9079270c32d5afb8db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
qpair might be deleted with incomplete requests (e.g. when NIC
is removed or when huge amount of qpair are being destroyed
simultaneously), this reduces the capacity of the transport
buffers pool. Check that qpair qd is nonzero and process
requests whose state is not FREE. Processing of requests
when qpair is being deleted leads to their release.
Change-Id: I0e42b5cb78f35add9f37942db77781db72c1e59c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Destroy subystem if spdk_nvmf_subsystem_set_sn or spdk_nvmf_subsystem_set_mn
failed. Check status in spdk_rpc_nvmf_subsystem_started callback, destroy
subsystem and report an error on error.
Fixes#1192
Change-Id: Id6bdfe4705b5f4677118f94e04652c2457a3fdcc
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/832
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is meaningless for network devices, but will be useful
when emulating the more complete register state of local devices.
Change-Id: I37052e514101c298a1f66cc72135a8c3dd669003
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This doesn't do anything for a network fabric, but it doesn't
hurt to allow these commands to set the emulated register
values for AQA. This will be more useful when emulating a
physical NVMe device.
Change-Id: I2891d7a07a5dceff50c6d66a8ce0b6b7c22a79f8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
