In RDMA, qpairs can't be removed from poll groups because
the poll group defines the completion queue. So don't
allow this operation anymore, even if it were theoretically
possible on other transports.
Change-Id: I69a3d1b336decd2d25e43ddea94f8b2095ef662f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421174
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We need these errno to make outputs more clear and make
spdk_vhost_blk_construct() conforms to it's declaration.
Change-Id: I1936e7393494a0344d97c8a920f3d719dee27002
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/421859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
--wait-for-rpc can be used instead.
This parameter will eventually become obsolete,
so let's remove the short version. It will be
exclusively used for "workload" in perf apps.
Change-Id: Ib4b7001d0e756349b05788278c894d622bc89790
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--silence-noticelog can be used instead.
The 'q' parameter is too precious to waste it on such
minor feature.
Change-Id: I96b5f1b62a9676aac895b08b17a80d55257ea83c
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
I/OAT device will refuse to resume from the Halted
state until we clear both CHANERR and CHANERR_INT
registers.
We only cleared CHANERR so far. So after the I/OAT
device encountered an error, SPDK would not be able
to initialize it ever again unless it's rebound to
the ioatdma driver.
Unlike CHANERR, CHANERR_INT is only accessible through
PCI config space.
CHANERR_INT is only available on I/OAT devices with
version < 3.3.
Change-Id: Ib369ca76f58c4868fe61ff9532b2e7947e5091d3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422026
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Setting of one-way CHAP auth is applied to mutual CHAP auth unexpectedly
for discovery session.
Change-Id: Ice931b5b70985ae433740eaee63740c9acff6ef2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were passing a map structure to unmap ioctl,
where we should obviously pass an unmap structure
instead.
Due to how map/unmap structures are, we were
unmapping much more memory than necessary on pci
hotremove.
Change-Id: Iabbea4b277228dc3de300849f751202f42bded2b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the case of user specified configuration file with the
section [Malloc] only and no valid settings like NumberOfLuns,
LunSizeInMB and BlockSize, just log an error message and
keeps the initialization running.
Change-Id: I567ff9163fc24f89520dc55462c26d3588154e50
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/421844
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Memory for socket structure is allocated in the selected net
framework but freed in the libsocket on the higher level.
This patch moves memory free to the net framework implementation.
Change-Id: Ia3d4e1553a858a38beb390986e9af105778c12c7
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/421587
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
irq_delay must be not less than zero.
Change-Id: I22d8a7df453f07a44a32582d8e880949824bf868
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/421685
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unify the regular mocks and the pointer mocks. Simplify
several of the #defines.
Change-Id: Ica8c69dbb70a685a55b5961b73fd7872f451c305
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/418884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the case that NVMe SSD itself has limited number of
hardware I/O QPairs, the corresponding abstraction of
I/O channel where upper module used to send I/Os down
will be NULL.
Add a check here for the NVMe-oF module and return the
error if the related I/O channel is NULL.
Change-Id: I97b799c6ecb026a01b0a414f1b49b949aa2407fd
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416689
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the controller has a serious error and set the Controller
Fatal Status field to 1, host driver does not know this error,
while here, when timeout happens, try to detect the CFS and
reset the controller to recover from such fatal status.
Change-Id: I9fa5b263b34edc52d0f359d874b2920f7570d1f3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/417622
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After some other refactoring, we can now efficiently handle
IBV_EVENT_SQ_DRAINED events during error cases again, so do that.
Change-Id: Iba9ec59d9e6b72d8a6d8c7b74f3c3c532114a0a4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421045
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_nvmf_rdma_qpair_recover
Also clean up some print statements
Change-Id: I67cfc9ea560298a310b1216d4542a981c0f1e8f3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420938
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Decide which action to take based on a combination of the
nvmf qpair state and the RDMA qpair state.
Change-Id: I338ace9dd66dd8dcf81aa30e51758aa81768d7f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421162
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When raid bdev goes to offline, manual removal of raid bdev may be
required. This patch tries to highlight paths to transit to offline
when configuring raid bdev failed.
Change-Id: I394984691fdf1d270d4e107e3131b677b42af49e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421205
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"Timeout" option was replaced with "TimeoutUsec" in SPDK 18.07 release,
while here, remove the option for 18.10.
Change-Id: Id681152a5400f525efcbc9ddbdf558966baef2b3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/421345
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Claim the block device when adding it to a new Namespace,
and prevent the block device to be added twice for other
modules and Namespaces. Also remove the test that using
same block device over different Namespaces.
Fix issue #371.
Change-Id: Ib7ce18e9fde4a15c0f19ce9e28e69145e54570e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/420472
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This operation is called at one place but this refactoring will be
rewarded by considering subsequent patches and future enhancement.
Change-Id: Id8a16a111847162d5716c3c1eebd0c6eb698903f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421195
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
During IO submission, raid_bdev can be get by bdev_io->bdev->ctxt.
Hence holding raid_bdev in raid_bdev_io_channel is duplicated.
Change-Id: I722432718aca8c5846541816b6ecca56821d77f6
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421182
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Locating spdk_bdev structure to the beginning of raid_bdev structure
will simplify the hierarchy and match other bdev modules.
Change-Id: I1bfbf773bc96a4f144e6bff772ade05bb42762e9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420818
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
No longer send an event to process the pending queue -
just do it inline.
Change-Id: I32716c9ecac3791de297c2a48529c15d220dbe6c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
recover was only called by drained, and they're relatively small
Change-Id: I65002cfe13d0045a37609be5b85be087402b4a65
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421043
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
There is no need to keep attempting to abort all requests later on,
there won't be any in these other states.
Change-Id: I7b12e10b87e0d0bb4a74fdf67fb278b443e70e8a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421042
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
The state of the RDMA qpair is not entirely initialized (RTS)
until after the CM event is accepted. Delay caching the state
until then.
Change-Id: I39befb867fc6a01e94d7fc176071aaabb906bd07
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
IBV_EVENT_SQ_DRAINED can occur during both error recovery and
normal operation. We don't want to spend time sending a message
to the correct qpair thread and then attempting to abort
all I/O in the case where this wasn't triggered by an error.
The case where this occurs during an error is very rare and
only in response to a user forcing the state to err from the
sqd state. For now, don't handle that case at all. Handle that
corner case in a later patch.
Change-Id: I16462ca52739b68f6b52a963f7344e12f7f48a55
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This was the only call point of two very small static functions,
so merge them into the main body.
Change-Id: Ifdd3355ffd500ac5ad4fcf69feace65b35132906
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420935
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The update call was never used independently of the get
call, so combine them
Change-Id: Ibae622e5fd23203e79ceeae1aeccc5c7d9d1ebc0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420934
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Currently, the bdev layer iterates over all of the
existing channels of a bdev to collect I/O
statistics. But this ignores statistics for
channels that are deleted.
Fix that by keeping an io_stat structure in the
bdev which accumulates statistics for deleted
channels. Use the bdev mutex to protect these
accumulations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3103c0b8b55973c827d977765f47e5b9e7f58e5f
Reviewed-on: https://review.gerrithub.io/421029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used further in an additional patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1126e5adfc24f17e5cdf33b0d3e04c78470771c8
Reviewed-on: https://review.gerrithub.io/421027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We should not use mutex, but use the spdk_send_msg policy,
then we can let only one thread to handle that and
eliminates the segement fault issue.
Now in the code, the qpair_mask is handled by the same
thread, e.g., the thread which owns the admin qpair of
the ctrlr.
Change-Id: I609fd4d49f5ecc85bc47bf9c23afbb507900be7c
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix the issue #379.
Change-Id: Ia953d4ebe232d389ba3264074592ae8d0cff467a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/421078
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Many functions were inconsistent in regard of error codes
they returned. In a couple of places we could print "Operation
not permitted" via strerror() from functions that were
supposed to return negative return codes, but returned
`-1` instead. (-EPERM == -1)
Change-Id: I7c36e54d449352dbd8036746e4f44a65c9b1d0b3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/419007
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch fixes github issue #385.
We need to unregister previously created NVMe controller
when creation of NVMe bdevs fails otherwise we won't be
able to use NVMe device as it will stay in wrong state.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I28a165aba1a556a2ed2d4cd5ff6fd510e80657d3
Reviewed-on: https://review.gerrithub.io/421006
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We need to decrement the free_cnt before checking
if it reached 0.
Note: the vq_free_cnt overflow is asserted at the
beginning of the function.
Change-Id: I655217785e4425d1cd3c704d24321b643be55dcf
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Release nvme rdma ctrlr before exit the nvme_rdma_ctrlr_construct function
when creating the admin qpair fails.
Fixes GitHub issue #363.
Change-Id: Ib988e0da2f627db06b68bd3fb72c117c52572cf8
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/420719
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Asking which thread we're currently on is more expensive
than sending a message.
Change-Id: I9d9007c9f7f30e4cdd9a97de6bf7a10b0e2a0594
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420933
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These were left out previously.
Change-Id: I4e97068d2f13ca1dd1cfae1b25564641cee794ef
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Two extra fields are added to the iostat rpc.
1. io_time. The amount of time since queue depth tracking was
enabled that has been spent on I/O processing.
2. weighted_io_time. Incremented each time this bdev's queue depth is
polled by the amount of time spent processing I/O since the last polling
event times the measured queue depth.
Change-Id: Ie70489ec24dee83f3eeac8f4f813ec7074ff458f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419031
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: If90434452dba51fbb72c8c486e3c1e4691549c34
Reviewed-on: https://review.gerrithub.io/420845
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With the reordering of the nvmf_tgt states, we need to remove any
connections accepted during the shutdown pahse of the target.
Change-Id: I768484366da8273df74b8d52a3e8de6158b6995f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Now that the acceptor poller is also checking for asynchronous rdma
events at the transport layer, we need to make sure that this is running
until all of the poll groups are deleted.
Change-Id: I34973047fcb247b8a5a36cc7db681ab0b3cb0779
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously, qpair deletion was synchronous and handled by the
io_channel_destroy_cb for the target. However, with the new asynchronous
qpair deletion api, these qpairs need to be completely removed before we
free the i/o channel and the poll group.
Change-Id: I42c62391df62825d53e158306c4372523403ad27
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The poll group pause, resume, remove, and add functions are only called
from the subsystem_state_change_on_pg function. Previously, they would
return immediately and the state change would move on to the next
channel. However, some of these functions (specifically remove) kick off
asynchronous APIs and we should not iterate past them until those
asynchronous operations complete.
Change-Id: I78804273b39f2d171ba26ac4478ad515356833f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419289
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Even after the bdev is removed, the underlying virtio
device may be still alive for some time. The user may
then try to recreate the virtio bdev and could technically
initialize a second simultaneous connection to a vhost
target. It does not cause any technical problems, but the
target may reject such connection if it reached a connection
cap or doesn't support more than one connection per target
(like SPDK vhost does as of today).
Since the fix is straightforward, here it is.
Note:
Virtio SCSI is already safe, because it uses a separate
completion callback to indicate virtio device destruction.
Change-Id: I2989780ef9b13c19d0432224ff4602a14be48315
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Daisuke Aoyama originally contributed to istgt, the
iSCSI target in FreeBSD. The SPDK iSCSI code is
originally derived from that. Due to copy and paste,
some incorrect copyright attributions have been added
to other files that do not derive from istgt, so
this patch removes those.
It is doubtful, at this point, that there is any code
whatsoever that remains from the original istgt, but
we can revisit that at a later time.
Change-Id: I207e1e6b99d271e2f12690be90a96f7d0c113af7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Use strdup for all strings allocated by JSON decoder and free them on
all paths.
Change-Id: Ia30d32c2fd6bd79f62588ca19bd3bb093d38a502
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Kunal Sablok <kunal.sablok@intel.com>
Also, don't try to remove any bdevs. The bdev layer
does that before module fini is even started.
Change-Id: I869f4b9e6d8590bfae2504a96d971c4f8866aeb9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420577
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For front-ends like iSCSI (and NVMe-oF in the future)
which want the backend to specify the data buffer, the
RAID module doesn't copy the pointer to the allocated
buffer from the child IO back to the parent IO. It
really can't copy the pointer - the child IO owns it
and will free it.
So the RAID module needs to allocate the buffer first
and then pass it down.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b1eceac9b1cdd26130e59e1d400c9869a19f881
Reviewed-on: https://review.gerrithub.io/420677
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is needed for next patch which needs to defer reads
when getting an io buf.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If31e7d76384c7fd05cc77a3b2124ee4e9354823e
Reviewed-on: https://review.gerrithub.io/420676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: If25463ea76e8382c61f10636e1119376a00104dc
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/411594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is necessary to avoid race conditions when freeing subsystems.
Change-Id: I9b4a7d006cc42cd29e13179e940ced0cc580f548
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/417351
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This ensures that when we continue to iterate through channels after
deleting the qpair, we will be able to continue iterating through
channels.
Change-Id: I6fba43dc14a3e5e8faac78f8b37e9e0c6aad2687
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is necessary to free the AER without sending a completion to ensure
that the host does not attempt to send an additional AER upon receiving
the first completion.
Change-Id: I2b3f8f286d6396019d8ace97d2376547705b8d9d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/420661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At times, it may be necessary to free requests without completing them.
For example, when freeing a qpair, one needs to free the AER sent from
the host before deleting the qpair. It is important not to send a
completion for the AER because:
1. According to the spec, this will trigger the host to send another AER
2. No Asynchronous Events have occured, so we should not complete the
AER.
Change-Id: I92e163f0fed0ee2bc942569a647cb3c1967edec9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/419732
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fixes a memory leak and a possible data race.
Change-Id: Ib094ca62e66d8d3a88b0acccc92e69214d413e72
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420573
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Besides the obvious memory leaks, we also need
to call the async completion callback, which may
also free some resources.
Change-Id: Ia80799be4b220053b82dfb4ee2453181c90136a1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420571
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK 18.05 introduces a new "runtime" directory,
which contains hugepage metadata to be accessed
by secondary processes. There may be multiple
files per each memseg and we cannot easily predict
their count, so this patch deletes all regular
files in that directory.
$ ls -l /var/run/dpdk/spdk_pidX
total 16784
-rw------- 1 root root 4096 Jul 27 15:10 fbarray_memseg-1048576k-1-0
-rw------- 1 root root 188416 Jul 27 15:10 fbarray_memzone
-rw-r--r-- 1 root root 16974144 Jul 27 15:10 hugepage_data
-rw-r--r-- 1 root root 12432 Jul 27 15:10 hugepage_info
srwxr-xr-x 1 root root 0 Jul 27 15:10 mp_socket
The DPDK config file is not located in this directory
yet to preserve some of the backward compability.
Eventually, it will moved there as well.
Change-Id: I61cf1a47b306b51b0817c9d870841508f1e5e604
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It was never destroyed.
Change-Id: If10b23b0a6784994a5aac85968f7efb99fa6ba70
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
create_iscsi_lun freed the provided parameters under
one condition, and did not under some other. The
behavior is now clarified.
When create_iscsi_lun succeeded, the parameters are
passed to an iscsi bdev and will be freed together
with its removal, but if the bdev could not be created,
the params need to be freed manually.
Change-Id: I010421d48461b365a324488029e11c90a4e20a37
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
It is not required anymore.
Change-Id: Ic16003311a451a223a626eca63cd9308a196bbdc
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420568
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Bdev module fini is triggered after all bdevs get
unregistered - this includes all iscsi bdevs. There's
no need to unregister/free them manually.
A few words for the iscsi_logout_async call, which was
never possibly called, but is now completely removed:
Destroying the iscsi context, which is done at bdev
destruction, will "tear down any existing connection"
as the libiscsi docs say, so there's apparently no
need to perform a manual logout.
Change-Id: Id163668a19a1d4b9bcd7538ecd1c0febae0fe47a
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/420567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Blobstore uses 1MB cluster size by default, but logical volumes
override it to 4MB by default. When an existing lvolstore is loaded,
all cluster calculations were being done based on the 1MB size - not
the 4MB cluster size read from the superblock. That would result
in asserts (due to mismatched used cluster mask size) and all kinds of
other possible weirdness with subsequent operations.
Fixes: 2c91e91907 ("blobstore: Save the original size of the disk.")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5d57c2b64aba791903e69560b9fe5684a72669df
Reviewed-on: https://review.gerrithub.io/420582
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Though the buffer can be allocated in the normal case,
however we still need to check it.
Change-Id: I483c7bd083c24590295e44473674c7b8ed30e9da
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420462
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for virtio bdev.
This is generic call for both - blk and scsi.
Scsi specific call has been removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3ed629942e9ef6067b488d94ca508b40e9e74f42
Reviewed-on: https://review.gerrithub.io/417008
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for NVMe bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib9a0475d735af2616a3005d04530ca825ece8a52
Reviewed-on: https://review.gerrithub.io/416546
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since destroy_lvol_bdev was implemented, it is now more convinient
to call destroy/unload for lvol store explicitly.
Rather than using lvs struct to pass a request checked on each
lvol close/destroy.
Change-Id: I56ee626e96f8752909d1584a20fe3345c5607fdc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/420285
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a module fails during init, github issue #363 reported ASAN
errors due to leaks from not cleaning up modules that may have
completed init before the failure. An earlier partial fix was
added, this is a more correct fix that addresses the specific
scenario reported as well as the simplified one used during
early debug...
Change-Id: Ia43476faf33d8e31b581529de3b6d75caed09096
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/420118
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also make the iov_len always set to the used length, not
the total length of the buffer.
Change-Id: I7ebb5b63c6ca7570369f4af0131a23c520c1f7b0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/419025
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes queue handling for QEMU 2.12 which is sending new memory
table but resetting only some queues
Fixes#339
Change-Id: Ic971725261720d7459e49a4f14bc15c2f2a77b1a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/420372
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Chen Wang <chenx.wang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some functions should be executed togther, so
group it into a single function which will avoid
the potential issues.
Change-Id: Ie57be20aa76d9bece82b5534c3c5fc6c9faeebad
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should check the value of error info. If it
is error, we should not do the read anymore.
Change-Id: Ie3527766779a1f4ed98dde7d9881fe66720badc4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In python script:
- timeout should be nop_timeout
- min_connections_per_core was min_connections_per_session by mistake.
- max_queue_depth was not included.
- call_cmd was missing.
- A space should be added after semicolon ":"
In SPDK library:
- type of options was not int32_t but int. Hence decode failed.
- type of options in dump were not correct.
Change-Id: Iaa79236c03d368cdf286a72c2386509ffa81530f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/419553
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If it fails to allocate the buf, we should conduct
the error handling.
Change-Id: If36b2dd84236052c777f5007ecbf7295e1c1d3eb
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The two values are all default values.
Change-Id: I117eb217b71c3f079a4450c6f716f9bb70762399
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/420333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use free() instead of realloc() to free allocated memory.
Currently realloc() is used to free memory unintentionally. Hence
the pointer is not nullified and it has caused double free.
realloc(g_spdk_raid_config.raid_bdev_config, 0)
is equivalent to free(g_spdk_raid_config.raid_bdev_config).
Use Shuhei's patch https://review.gerrithub.io/#/c/spdk/spdk/+/420224/
as a reference.
Fixes GitHub issue #372.
Change-Id: If3b761e3ac10844f734dab9b10d202db9ddc79c0
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/419975
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is not an error if bdev is smaller than cluster size so convert this
error to infolog. This fixes false error message dring examine process.
To return proper error message when creating blobstore using RPC the
_spdk_bs_alloc was adjusted to return errocode that is propagated up and
converted to "No space left on device".
Fixes#316
Change-Id: Ic9803720a55125fcfa34263346f2d9e1aae03a53
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/420054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch fixes lvol delete behaviour.
First, we look if there are any dependencies that disallow lvol deletion.
If there are any (i.e. dependent clones) we fail.
Otherwise we delete lvol and unregister associated bdev.
destroy_bdev no longer deletes lvol.
Fixes#345
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I99e6abded2ed3ae2742103f81fc7eb937ad1cab4
Reviewed-on: https://review.gerrithub.io/407402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
