We report SPDK_WORK_BLOCK_SIZE (1 MiB) as the Maximum Transfer Length in
the Block Limits VPD. The initiator should not submit a request larger
than this; if it does, fail the request.
Change-Id: I39575cdca4555ac1f78e055a48569be3f47e4781
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373162
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
None of these make sense as global parameters - they're
all only configurable per-disk. This is a large simplification
and removes the SCSI library's dependency on the config
file entirely.
Change-Id: I1236158a23fa49e437938c51022b13772e404561
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables checking permissions - for example,
spdk_bdev_write will fail if the descriptor was not
created with write permissions.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I68b65a560f471f2e0f71a7f42cfa6689b911110f
Reviewed-on: https://review.gerrithub.io/369493
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This includes file names, functions, #defines, etc.
There are still a few uses of "blockdev" outside of
include/ and lib/ - these can be handled later.
This preps for a future patch to consolidate vbdev
modules and bdev modules into just bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70e575709ae1b0a116b08515fd38ae793de05377
Reviewed-on: https://review.gerrithub.io/369325
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This variable was misleading and unnecessary. Replaced all it's
occurences with SPDK_SCSI_DEV_MAX_LUN.
Change-Id: Iaaf9ed5efb60f9a89585121d2fbec7b43c3723e9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/368115
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is not actually useful to be immediately returned
a handle to the bdev_io. There isn't anything valid
that the user can do with it at that point. Instead,
return an integer error code.
Change-Id: Iffa9a8dc5b2eefab57e3cc1f68919985431d17d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/364137
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Mark the intentional switch/case fallthrough locations with comments
recognized by -Wimplicit-fallthrough=4 in GCC 7.
Change-Id: Ibf2b077d9432e7f23a3833f98edd4768e5e8cfe9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363490
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is now just one type of reset, which is equivalent
to a HARD reset previously.
Change-Id: I955b219cbc5c25793d97de1cc003b30ae99313ac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/362615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds property of transport protocol id to spdk_scsi_dev.
This allows to change it depending on which appliation is using
the device. Previously only iSCSI was used for all.
Setting protocol id is done at the time when device is added to
vhost controller (vhost) or target node (iSCSI).
Please note that for SPDK vhost SAS protocol id is used,
as that is what kernel vhost reports as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I455a856c5d7796a749b6650fee0218d526e094ed
Reviewed-on: https://review.gerrithub.io/362864
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
- rename spdk_malloc_socket to spdk_dma_malloc_socket
- rename spdk_malloc to spdk_dma_malloc
- rename spdk_zmalloc to spdk_dma_zmalloc
- rename spdk_realloc to spdk_dma_realloc
- rename spdk_free to spdk_dma_free
Change-Id: I52a11b7a4243281f9c56f503e826fd7c4a1fd883
Signed-off-by: John Meneghini <johnm@netapp.com>
Reviewed-on: https://review.gerrithub.io/362604
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NAA locally assinged designator(3h) format was defined in SPC4,
as SPDK claimed can only support SPC3, so we used NAA IEEE
extended identifier format instead.
Change-Id: Ia4c153263c6b89ae8160488deaf16fd0e5cac8dc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/361904
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This ensures that all spdk_bdev_io structures now have
an attached channel, simplifying some future work around
things like counting the number of outstanding IOs for
a given channel (which otherwise would have had to
account specially for resets).
Reset semantics are still that they affect the entire bdev
and not just the channel it was submitted on.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8aad21a88faacecfd94bdba350059528eb62c390
Reviewed-on: https://review.gerrithub.io/362251
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The user should not see the bdev_io status directly; the NVMe and SCSI
error code wrappers provide the ability to translate to the desired
format regardless of what kind of error is stored inside the bdev_io.
Replace the spdk_bdev_io_completion_cb status parameter with a bool
simply indiciating whether the I/O completed successfully.
Change-Id: Iad18c2dac4374112c41b7a656154ed3ae1a68569
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/362047
Tested-by: <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The type of a task is known due to the function used to submit it:
- spdk_scsi_dev_queue_task() for normal SCSI command tasks
- spdk_scsi_dev_queue_mgmt_task() for management tasks
Change-Id: I183a1f89ab85f3fce1de2491e77d95d4b147fd72
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI read and write functions use the same LBA range check, so move
it up to spdk_bdev_scsi_readwrite().
spdk_bdev_scsi_read() previously passed task->transfer_len / blen rather
than xfer_len to the LBA range checking function, but this should
actually be using the transfer length field from the CDB (which is the
xfer_len parameter).
Change-Id: I8285abf936a18a0baf7cc25709945637e4e6b87d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Factor out the common data direction Check Condition logic from read
and write.
Change-Id: Ia2fbd5f69eefd826ebb5ab2a8e99aeb380f1b7ea
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
What was previously called "maxlba" was actually the block count
of the device, which is the maximum LBA plus one.
Change-Id: I5e141a3eb0c79b2aa70006739c5586cb50744d3d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Blockdevs already indicate support for unmap via
spdk_bdev_io_type_supported(bdev, SPDK_BDEV_IO_TYPE_UNMAP).
Change-Id: I634f27a281fd900bb3a6da2e4ff8a74e43579578
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI layer always passes task->iovs to spdk_bdev_readv(), so there
is no way for task->iovs != bdev_io->u.read.iovs to be true.
Change-Id: I4c0a2075c6e50e4304d62707a29bededa37b4e5c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move the scsi_nvme translation code from the SCSI library into bdev, and
provide a generic way to translate any bdev_io status into a SCSI
status.
Change-Id: Ib61a6209387c24543e31574e2b5ca249e2ac8b74
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch assigns correct value to page control.
Now that page control value is correctly taken from CDB,
error via sense data is reported when processing "saved values".
"Changeable values" are not supported, so all parameters
are reported as not changeable when requested.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I41378c96b1e8c716b5d0ce4b72777065fb122228
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
According to the scsi standard, all ASCII data fields "may be
terminated with one or more ASCII null (00h) characters"
[7.6.10, 4.4.1]. Windows SCSI Compliance tests expect a null terminator
there, so let's include it.
Change-Id: I18fa35295233a163cea711a5c4ff8e3d3e80c4f1
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
This fixes multiple SCSI reset issue.
This patch does not remove sleep in iSCSI tests.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I5e9f3705e5dc34004b9d1b9e40fbdcb04a3bee4e
Some intermittent issues still observed with multiple
resets in quick succession. Reverting for now while the
issue is more fully root caused.
This reverts commit 7fa7f91ee3.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I493b564e8a110bbfb7a6cc47107d53d6eca40053
For iscsi read/write, expected_data_xfer_len
is 0, dxfer_dir is set to SPDK_SCSI_DIR_NONE.
But we can still have read/write op in SCSI layer.
This patch solves this issue.
Change-Id: I950e163fffb06fefaf8a913d1f6de29c96a52264
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Use a plain function pointer + callback context for the bdev I/O
completion callback. This is possible now because each I/O channel will
be polled on the core that submitted the I/O.
Change-Id: I29ee8e4a3430df11c74845adab840395b9bc5010
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
An old prototype SPDK AHCI driver would return
TASK_SET_FULL if all NCQ slots were full on a given
disk. This would kick the SCSI task back to the LUN
to be retried later. Since then, we have pushed
responsibility onto the bdev modules themselves
to handle this kind of queueing/retry logic.
Removing this logic allows us to make some additional
changes that enable tasks to get completed inline without
an extra event callback to handle completion. We also
no longer need to worry about checking if pending tasks
need to be executed in the complete_task() routine, since
the execute() routine will now always exhaust the pending_task
list.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If2dc3ab017e0dbc225c8f627e1f87c5a8e9b1e3e
This allows the elimination of the spdk_event_get_arg1() and
spdk_event_get_arg2() macros, which accessed the event structure
directly; this was preventing the event structure definition from being
moved out of the public API header.
Change-Id: I74eced799ad7df61ff0b1390c63fb533e3fae8eb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The vendor ID for Intel shoudl be "INTEL", according
to the following page:
http://www.t10.org/lists/vid-alph.htm#VID_V
Change-Id: Ib9611e5604c8b5e3eaec8101548aaf4a3c45597a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Remove 4k allocation size in spdk_scsi_task_alloc_data(). From now on
all commands must obay allocation length.
Change-Id: Ica9384c62d431483ae1d0bd2e6fdee18b570861f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This refactor MODE SENSE 6 and 10 related functions to respect buffer
size parameter.
Change-Id: I03bad456bac0554a8bf7b56f69d1f9cf5b1991f6
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
