From rdma_cma.h "Users must destroy any QP associated with an
rdma_cm_id before destroying the ID."
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I5ed0c25221c5401cdde8b31a4e217b9d79e7caaa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464290
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Purpose:
1 Do not caculated the psh_len every time.
2 Small fix, for ch_valid_bypes, and psh_valid_bytes,
we do not need to use uin32_t.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9b643da4b0ebabdfe50f30e9e0a738fe95beb159
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464253
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We should be checking directly against the base of the iov when doing
memory map translations. The current behavior is to check against the
starting address of the buffer which is a close address, but not exactly
the same.
Change-Id: I7f65224a6836a814708438f2866d84ae22882216
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463893
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: <jiandong.zheng@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of failure during resource allocation within poll_group_create
there is a lack of return statement which could lead to NULL ptr
dereference.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I84abe64a1843117d76b97e62656bdfc4fe2b35d8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463195
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_sock_group_poll() and spdk_sock_group_poll_count() had returned
0 on success. The implementation didn't match the specification
described in the header file, and couldn't be used to collect stats
correctly because 0 means idle.
This patch fixes the return value of spdk_sock_group_poll() and
spdk_sock_group_poll_count() to return number of events and
the callers not to overwrite the return value by 0.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e2a17187fc74ea44d3acf2f35d63f5e5a254eda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMf statistics functions use spdk_get_io_channel function to get a
poll group. It increases reference counter in io channel and causes
problems on application exit. spdk_put_io_channel calls were added to
release the channel.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I832d1eae346c3bc3858ed0ed063ff7a7a897a2f5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463389
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
- New files and updates to existing SPDK files to add the NVMf-FC transport.
- Depends on an existing low level driver library. This driver is not part of SPDK repository.
- Makefile updates to build FC transport (using CONFIG_FC)
- Update configure script for FC build.
- New FC unit test for FC-LS commands.
- Update unittest.sh to run FC unit test (when built).
Signed-off-by: John Barnard <john.barnard@broadcom.com>
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: If31d4d25feab76c2dbe90a7faf71d465c2c3a354
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Phenomenon:
Test case: Using the following command to test
./test/nvmf/target/shutdown.sh --iso --transport=tcp
without this patch, it will cause coredump.
The error is that the NVMe/TCP request in data buffer
waiting list has "FREE" state.
We do not need call this function in
spdk_nvmf_tcp_qpair_flush_pdus_internal, it causes the
bug during shutdown test since it will call the function
recursively, and it does not work for the shutdown path.
There are two possible recursive calls:
(1)spdk_nvmf_tcp_qpair_flush_pdus_internal ->
spdk_nvmf_tcp_qpair_process_pending ->
spdk_nvmf_tcp_qpair_flush_pdus_internal ->
>..
(2) spdk_nvmf_tcp_qpair_flush_pdus_internal->
pdu completion (pdu->cb)
->..
-> spdk_nvmf_tcp_qpair_flush_pdus_internal.
And we need to move the processing for NVMe/TCP requests
which are waiting buffer in another function to handle
in order to avoid the complicated possbile recursive
function calls. (Previously, we found the simliar
issue in spdk_nvmf_tcp_qpair_flush_pdus_internal for
pdu sending handling)
But we cannot remove this feature,
otherwise, the initiator will hang for waiting the
I/O. So we add the same functionality in spdk_nvmf_tcp_poll_group_poll
function.
Purpose: To fix the NVMe/TCP shutdown issue.
And this patch also reables the test for shutdown and bdevio.
Change-Id: Ifa193faa3f685429dcba7557df5b311bd566e297
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462658
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds measurement of time request spends from the moment it
was polled till completion.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I1fcda68735f2210c5365dd06f26c10162e4ddf33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds statistics for pending state in NVMf RDMA subsytem
which may help to detect lack of resources and adjust configuration
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I9560d931c0dfb469659be42e13b8302c52912420
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
RDMA polling statistics: number of polls and number of completion
entries returned.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Iabcf2cb6f6a35f595b89b58cdfcd177a637dda13
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds transport part to nvmf_get_stats RPC method and basic
infrastructure to report NVMf transport specific statistics.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ie83b34f4ed932dd5f6d6e37897cf45228114bd88
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452299
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Global tgt->discovery_log_page may contain old hostnqn log
page, so we will update the discovery log page if the offset
is zero.
Change-Id: Iba24409b16626d157d2782c6813fe5a0c27f1082
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <shahar.salzman@kaminario.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Initiator can use `nvme discover` command to display all
the subsystem's information, because we don't check
the allowed HOSTNQN for Discovery service, so here
adding this feature so that only return the log pages
to the allowed hosts.
Fix issue #576.
Change-Id: I51e6770bd67ea0b41caf9de3a8899923377e6255
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
When creating a new controller in the NVMe-oF target, hostnqn is
a must parameter, so we save the hostnqn to controller data
structure, and it can be used to verify the access right of
Discovery service.
Change-Id: I86a6f50d3209d5bbb8ac85508288173d826ea216
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462439
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
qpair structure is freed and an error code is returned to the caller in the case of failed qpair initialization in function spdk_nvmf_rdma_qpair_initialize (e.g. bad return value of rdma_create_qp).
The return code is handled by nvmf_tgt_poll_group_add function which destroys the qpair for the second time.
This patch fixes#857
Change-Id: I0773652ecccbbd634ad272106e0a93c1e591d7d2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462011
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Lorne Li <lorneli@163.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Func spdk_nvmf_rdma_destroy_defunct_qpair is a "last chance option"
to destroy qp manually if some driver/hardware doesn't drain qp's
failed wr as expected.
There's a probability that ibv_poll_cq polls wr of the destoryed qp
after spdk_nvmf_rdma_destroy_defunct_qpair's execution. Although in
practice the risk of this situation is minimal(if not non-existent),
add a log here so that we could detect this situation easily.
Change-Id: Ifa9534397513bcea34c18fbb8168eef8f53599c1
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462441
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently rqpair will be destroyed directly in ibv_poll_cq path
if it has been drained, regardless of whether there are outstanding
I/Os issued to bdev layer. So after outstanding I/Os completing,
spdk_nvmf_rdma_close_qpair will be called from nvmf layer, accessing
a destroyed qp.
This path defers qp destruction in nvmf_rdma_destroy_drained_qpair
func until nvmf layer closes qp.
Fixes 851
Change-Id: I8bcce66f8053ddb105702ac603d5d73af54bdcfc
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461237
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
move the staement location of TCP request setting and remove
the duplicated code.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia659756185547ff4f8aa26c5bc01f63defe6c113
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This priority is used to differentiate the sock priority on the TCP connections
between NVMe-oF TCP target and other TCP based applications.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6ee294e647420b56d1d91a07c2e37bf34ce24e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I5bcac50baca785255eb068086e67c07d120b042f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic42db528bbae4b3ca2e91cb9ac46def99ecb5f28
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No need to have it under lock. Additionally in case of failure
there was a lack of rdma_destroy_id(). This is addresed within this
change as well.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Idbb36d51ad4ef7ef81051463f56efc87ef00c966
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462054
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of failure during pd or map allocation freeing list of devices
was missing.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If62f7b072f3894fd1a7e856c19b4ea51646dd20e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462079
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of pd allocation by nvmf hooks there is a lack of null
check as oposed to pd allocation by ibv_alloc_pd.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iead6e0332bdee3da4adb6e657af298215c4e2196
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds statistics for BDEV IO pending state in NVMf subsytem
which may help to detect lack of resources and configure pool size
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I6c60c27efe3efed194b2d2c46a707af7c2808fe9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds number of admin and IO queue pairs per poll group in
NVMf statistics. It can be useful to troubleshoot load sharing issues.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I2a9c0fc99cf5d0729eb130d30540ae52b5207fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds nvmf_get_stats RPC method and basic infrastructure to
report NVMf global and per poll group statistics in JSON format.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I13b83e28b75a02bc1dcb7b95cbce52ae10ff0f7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Now that the resume path can correctly handle the case where a namespace
was removed and a new one added with the same nsid, this no longer needs
to be asynchronous.
Change-Id: I693045e66a7d4e75255b526d8f5ca5ef8695533e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459606
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set DIF context of the corresponding request to PDU when
- processing in-capsule data of the command,
- processing data of C2H PDU, or
- processing data of H2C PDU.
Change-Id: I3a668a55be21dbe2ee6ecf26476290670bd7b4a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When NVMe/TCP initiator transfers in-capsule data, NVMe/TCP has to
process it as in-capsule data. If DIF insert/strip is enabled,
in-capsule data size will be increased by NVMe/TCP target to insert
metadata. However size of in-capsule data buffer had not been
increased, and buffer overflow occurred when NVMe/TCP initiator
transfers in-capsule data to NVMe/TCP target with DIF insert/strip
being enabled.
This patch increases size of in-capsule data buffer size to store
metadata. 16 byte metadata per 512 byte data block is the current
maximum ratio of metadata per block.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I88b127efd7a945bde167a95df19a0b9175cb8cd0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We updated readv_offset before generating DIF to avoid adding
the temporary variable _rc in the previous patch, but that caused
write error when inserting DIF.
Fix the bug in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0788280a83cbea2554c851db77751432fc00cba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When handling the capsule command header, call spdk_nvmf_request_get_dif_ctx
by passing the NVMf request and the reference to the DIF context, and set
the flag dif_insert_or_strip of the NVMf/TCP request to true.
spdk_nvmf_request_get_dif_ctx returns false immediately when the
corresponding NVMf controller disables DIF insert/strip.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16f6b322f2692d5f9653d011a490e7929ec37365
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When the NVMf controller's flag dif_insert_or_strip is enabled, DIF is
inserted for write I/O and stripped for read I/O, and the corresponding
NVMe-oF initiator should not be aware of the DIF setting of the
backend bdev.
Hence this patch hides the DIF setting of the backend bdev
when the flag dif_insert_or_strip is enabled.
Change-Id: I3c14880c2e94cba7f76b1bca78afb36bfe884e26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The first idea was that the caller of spdk_nvmf_request_get_dif_ctx()
should check if the current transport enables DIF insert/strip before
calling spdk_nvmf_request_get_dif_ctx().
But NVMf controller knows if DIF/insert/strip is enabled now by the
previous patch. Hence spdk_nvmf_request_get_dif_ctx() checks if the NVMf
controller enables DIF insert/strip at its head.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78253d356b694800c3a9a9608514df58e0c631a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add a flag dif_insert_or_strip to struct spdk_nvmf_ctrlr that indicates
whether DIF insert/strip is done.
Copy the DIF insert/strip setting of the corresponding transport options
to the flag at NVMf controller creation.
The purpose of this patch is to make DIF insert/strip not per-transport
option but per-controller option because we may want to be able to
control DIF insert/strip per controller at some point. Besides this patch
will clean the implementation.
Besides align indent around the change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57f65960b430e55f4021ed514aacd85581ff9993
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch is used to do the following work:
1 It is optimized for NVMe/TCP transport. If the qpair's
socket has same NAPI_ID, then the qpair will be handled
by the same polling group.
2. We add a new connection scheduling strategy, named as
ConnectionScheduler in the configuration file. It will be
used to input different scheduler according to the customers'
input.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifc9246eece0da69bdd39fd63bfdefff18be64132
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add the optimal poll group get function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia9e57c6924a6563d79269cf535814883e83698cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
By capturing this pointer onto the stack, we inform the compiler
that we don't expect it to change. That allows the compiler to
generate more efficient code.
Change-Id: I0f3ff9373662198e915269c4498e4902a2cdb808
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This signals to the compiler and analysis programs that this
won't change during iteration, so it may produce better code.
Change-Id: I478c0c9445d4ddf8a69ab1b3deaf628b82a0eaea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This is a place holder and subsequent patches will use the option
dif_insert_or_strip and provide JSON RPCs to configure it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e3fbb1d49c47647a9a0a1a2149152801591b283
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a helper function to get DIF context when the passed NVMf request
is for I/O queue, NVMe read, write, or compare command, and its NSID
is valid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I796c20607c7b64a8be85da5131c5ea95ffd9f8e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a helper function to get necessary DIF information and set
them into the passed DIF context and return. This function will
be called only when the specific requirement is satisfied and
the caller will be added in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic435886ca936a211f34278b813f547ffa43b9000
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When DIF is inserted or stripped,
- in the TCP transport layer, we can use LBA based length throughout, but
- in the NVMf controller layer and BDEV layer, extended LBA based
length must be used, and NVMf controller gets the length from
tcp_req->req.length.
Hence by adding and using two variables, elba_length and orig_length
to struct spdk_nvmf_tcp_req, set the extended LBA length to
tcp_req->req.length before calling spdk_nvmf_request_exec(), and then
restore the original LBA based length to tcp_req->req.length after
calling spdk_nvmf_tcp_req_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9309b8923c6386644c4fd8ef3ee83a19f5d21ce5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458926
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If tcp_req->dif_insert_or_strip, increase the length from LBA based
to extended LBA based by using its own DIF context.
Change-Id: Ie9f5cf757328dda795b43a7b6c70a72259865115
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The next patch will extend the length from LBA based to extended
LBA based and use it as buffer length to insert or strip DIF.
So cache sgl.unkeyed.length at the top of spdk_nvmf_tcp_req_parse_sgl
and use it throughout.
Besides, one unrelated change-the-line to improve the readability
is included.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a1dc9379bb5671ec80b5b478504c9879a4f0fff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Generate and insert DIF to each data block when reading more than a single
byte.
This update is very similar with the use case of spdk_dif_generate_stream
in iSCSI target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I063919a32153ac0daf6d6eb1836c0d5995b65d33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459092
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Load reservation information based on ptpl configuration file, and
restore the information to NS data structure.
Change-Id: I5f46d49a6d1e6e49aab93ca7cd654469a3a08659
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If DIF mode is local and C2H data is extended LBA payload, DIF should
be verified just before sending the payload.
Add a helper function nvmf_tcp_pdu_verify_dif and call it in
spdk_nvmf_tcp_send_c2h_data after completing nvme_tcp_pdu_set_data_buf.
When nvmf_tcp_pdu_verify_dif returns error, treat the error as fatal
transport error because the error is caused by the target itself.
Handle the fatal NVMe/TCP transport error by terminating the connection
as described in the NVMe specification.
On the other hand, data digest error is treated as a non-fatal transport
error because the error is caused outside the target. This is reasonable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9680af2556c08f5888aeaf0a772097e4744182be
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
I used pahole to see whether the alignment of the structure
is reasonable. After reorgnization, we can saved 16 bytes and 1
cacheline according to the information by pahole.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1347e7c582fe2b00707e2841690b87d53cc61e33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460572
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using naming rules consistent with other related libraries is helpful
to ensure the quality as verified by this patch series.
This patch changes a few parts to use iov and iovcnt for SGL operations.
Besides, name of an array points to the head of the array and is
constant. So copying name of array to an another pointer is not
necessary and can be removed.
Change-Id: I2324f28126b3088098c1c767cf6c060f22c175c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we had used nvme_tcp_pdu_set_data() for incapsule data.
This patch changes handling incapsule data to use
nvme_tcp_pdu_set_data_buf() as same as H2C and C2H.
This unification is necessary to support DIF insert and strip
in NVMe/TCP target later.
Change-Id: I02cae8db94e51cf79a354dd64ad45f0e491ec08e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
NVMe/TCP target had assumed the size of each iovec was io_unit_size.
Using nvme_tcp_pdu_set_data_buf() instead removes the assumption
and supports any alignment transparently.
Hence this patch moves nvme_tcp_pdu_set_data_buf() to
include/spdk_internal/nvme_tcp.h and replaces the current code to use it.
Besides, this patch simplifies spdk_nvmf_tcp_calc_c2h_data_pdu_num()
because sum of iov_len of iovecs is equal to the variable length now.
We cannot separate code movement (lib/nvme/nvme_tcp.c to include/
spdk_internal/nvme_tcp.h) and code replacement (lib/nvmf/tcp.c)
because moved functions are static and compiler give warning if
they are not referenced in lib/nvmf/tcp.c.
The next patch will add UT code.
Change-Id: Iaece5639c6d9a41bd35ee4eb2b75220682dcecd1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
And also add spdk_sock_group_get_ctx function
Change-Id: I2a2a58b0588ff7d99d3538ea0a633a3b8c7a234b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Maximum size of NQN is already defined to be SPDK_NVMF_NQN_MAX_LEN,
and hence use fixed size string whose size is SPDK_NVMF_NQN_MAX_LEN
+ 1 for spdk_nvmf_vhost::nqn.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b9c7cc21200b3e88b5485ebfdcd5040bc6e3589
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add file based reservation information definition, the data structure
can be used to store all the reservation information to a json
based configuration file, and enable this feature with REGISTER
command.
Change-Id: Ic93cfc5934a4ad96f11b96ec77bacb877edf6c10
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In our previous code, we will handle all the PDU until there is
no incoming data from the network if we can continue the loop.
However this is not quite fair when we handling multiple connections
in a polling group.
And this change is setting a maximal NVME/TCP PDU we can handle
for each conneciton, it can improve the performance. After some
tuing, 32 should be a good loop number. Our iSCSI target uses
16.
The following shows some performance data:
Configuration:
1 Command used in the initiator side:
./examples/nvme/perf/perf -r 'trtype:TCP adrfam:IPv4 traddr:192.168.4.11 trsvcid:4420'
-q 128 -o 4096 -w randrw -M 50 -t 10
2 target side, export 4 malloc bdev in a same subsystem
Result:
Before patch:
Starting thread on core 0
========================================================
Latency(us)
Device Information : IOPS MiB/s Average min max
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51554.20 201.38 2483.07 462.31 4158.45
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51533.00 201.30 2484.12 508.06 4464.07
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51630.20 201.68 2479.30 481.19 4120.83
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51700.70 201.96 2475.85 442.61 4018.67
========================================================
Total : 206418.10 806.32 2480.58 442.61 4464.07
After patch:
Starting thread on core 0
========================================================
Latency(us)
Device Information : IOPS MiB/s Average min max
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57445.30 224.40 2228.46 450.03 4231.23
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57529.50 224.72 2225.17 676.07 4251.76
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57524.80 224.71 2225.29 627.08 4193.28
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57476.50 224.52 2227.17 663.14 4205.12
========================================================
Total : 229976.10 898.34 2226.52 450.03 4251.76
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I86b7af1b669169eee2225de2d28c2cc313e7d905
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By now (5.1 is released), the Linux kernel initiator supports the
success optimization and further, the version that doesn't support
it (5.0) was EOL-ed. As such, lets open it up @ spdk by default.
Doing so provides a notable performance improvement: running perf with
iodepth of 64, randread, two threads and block size of 512 bytes for 60s
("-q 64 -w randread -o 512 -c 0x5000 -t 60") over the VMA socket acceleration
library and null backing store, we got 730K IOPS with the success
optimization vs 550K without it.
IOPS MiB/s Average min max
549274.10 268.20 232.99 93.23 3256354.96
728117.57 355.53 175.76 85.93 14632.16
To allow for interop with older kernel initiators, we added
a config knob under which the success optimization can be
enabled or disabled.
Change-Id: Ia4c79f607f82c3563523ae3e07a67eac95b56dbb
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If users set the persist through power loss configuation file,
that means the Namespace has the capability to support ptpl
feature, here we added a ptpl_activated flag to indicate that
the users enable the feature or not. Users can use Set features
or Reservation Register commands to change the value.
Change-Id: Iae3fd44085c5be5bf9574e49efa567e8212dee20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost testing crashed from Nightly testing, because a member
access within null pointer of type 'struct ibv_send_wr'.
Change-Id: If8f34f23864883ea73516d2d1fe3b30137c04316
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SQSIZE parameter validation in Connect command was broken because QID
field in qpair was used before intialization.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I8a0b359937d661df3b9888e6084e7d0b4a9056ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unsetting this flag will decrease the number of WRs retrieved during CQ polling and will decrease
the oeverall processing time. Since RDMA_WRITE operations are always paired with RDMA_SEND (response),
it is possible to track the number of outstanding WRs relying on the completed response WR.
Completed WRs of type RDMA_WR_TYPE_DATA are now always RDMA_READ operations.
The patch shows %2 better peformance for read operations on x86 machine. The performance was measured using perf with the following parameters:
-q 16 -o 4096 -w read -t 300 -c 2
with nvme null device, each measurement was done 4 times
avg IOPS (with patch): 865861.71
avg IOPS (master): 847958.77
avg latency (with patch): 18.46 [us]
avg latency (master): 18.85 [us]
Change-Id: Ifd3329fbd0e45dd5f27213b36b9444308660fc8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456469
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the TP 8000 spec in Page 26:
Maximum Number of Outstanding R2T (MAXR2T): Specifies the maximum
number of outstanding R2T PDUs for a command at any point in time
on the connection.
Note that by the spec, the target may only support single r2t
(which is the minimum possible), it doesn't have to use multiple r2ts
even if the initiator supports that. So remove the maxr2t and
pending_r2t variable in the tcp qpair structure.
In the original design, we think that maxr2t is the maximal active
r2t numbers for each connection. So if the initiator sends out maxr2t=16,
it means that all the commands of a qpair can use such number of R2T pdus.
So we need to wait for the available R2Ts for the request when the maxr2t
reaches the maximal value. But it is the wrong understanding of the spec.
In fact, each command has its own number of maximal r2t numbers, then we
do not need to use the wait method for R2T method anymore. So we remove
the state TCP_REQUEST_STATE_DATA_PENDING_FOR_R2T. Futhermore, we adjust
the related SPDK_TPOINT_ID definition.
In current patch, the target will support one active R2T for each
write NVMe command. Thus, we remove the function spdk_nvmf_tcp_handle_queued_r2t_req.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7547b8facbc39139b4584637ccc51ba8b33ca285
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455763
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This matches the Linux kernel target. Users can
still decrease this default when creating the
transport (i.e. -p option for nvmf_create_transport
in rpc.py).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icad59350a2cd35cfc4ad76d06399345191680c05
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We could run into issues with this if we were using an arbitrarily large
amount of cores to run SPDK.
Change-Id: Ia7add027d7e6ef1ccb4a69ac328dbdf4f2751fd8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452250
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help us not iterate through the whole list of connections when
only some of them have pending recvs.
Change-Id: I681bc98befbdda4e77ef333b7a086c08b2708eb3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help save MMIO overhead. Especially in the SRQ case.
Change-Id: I6fb70cf6de4763450f97961f41ccdce3acec2e63
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By creating a list of qpairs, we can avoid looping over every connected
qpair to process sends each time we poll.
Change-Id: If24bbc363176f52fbfb756d56719edd885a21a11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By batching ibv sends each time we poll, we can reduce the number of
MMIO writes that we do.
Change-Id: Ia5a07b0037365abfa8732629c34d34a9ed49ac70
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It isn't obvious why hosts are being disconnected at the moment.
Change-Id: I5515ba40883ccb20921d0da013b27670212bf649
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are cases where srq can be a detriment. Add a flag to allow users
to disable srq even if they have a piece of hardware that supports it.
Change-Id: Ia3be8e8c8e8463964e6ff1c02b07afbf4c3cc8f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452271
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The individual transports will adjust these sizes when
necessary. In fact, we have to remove this check, since
RDMA transport may adjust the io_unit_size based on the
max number of SGEs - and can adjust it to a value that
will fail this check if we reload the configuration.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2708c7f5aaa54a368ec932ec40dd6447f1a4fde0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452474
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This restriction helps reduce the amount of padding when
printing out the event trace, allowing it to fit in a
small number of columns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa31e5a6967c7b9bc7028069effb71533f80596f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
During connect call based on queue type (AQ or IOQ), SQ size should be
validated against max sq size for that particular queue type.
Change-Id: I977d7556e4d04e37004d16c87efffd3b467fa62c
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use the rpoller->srq to check if a qpair is valid when processing
recv completions.
Change-Id: I6aa360adc48a3312ddcf79f10e2a65b502a7314f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Mempools are based off of a ring structure which allocates its elements
as a power of two. It also only exposes n-1 elements to the user. So
when we create a mempool with 2^n elements in it, we have to allocate a
ring with 2^n+1 entries. By decreasing the number of elements in these
key mempools by 1, we can save a decent amount of memory.
Change-Id: I942c9dd4cf59096969bc2559fb46fd2084a07f09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It used to be that we would get async events very infrequently. However,
with the introduction of SRQ, this number has gone up tremendously.
Change the way we report our these events so that we don't spam/confuse
people running the target.
Change-Id: I33070281fa854cbc17784d61bbbb870196ca8780
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there are outstanding recvs for a qpair when it is destroyed, we need
to clear the qpair from it before reposting it. Otehrwise, we have a
potential heap-use-after-free of double free (depending on whether the
recv completion is in error state or not).
See github issues #730
Change-Id: Ic2009c761cbcc5e89174f62fbd0872d0489c67ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At the RDMA level, we allow processing requests that should contain a
data transfer, but specify a length of zero to be passed up the stack
without a data buffer. See spdk_nvmf_rdma_request_get_xfer. In the case
of the reservation requests, we weren't checking whether req->data was
NULL before trying to copy into it causing us to segfault if we got a
malformed reservation request.
Found when using the fuzzer.
Change-Id: I320174ec72a8d298ab6ca44ef6a99691631f00ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not an error if the NVMe hard drive was formatted to 512 + 8 but
has no protection type, so we will also disable the protection for
NVMoF target.
Change-Id: I07e605cff9545f46c642f7ca783a4727a26abece
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451926
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were setting this value in the target from our initiator, but it
turns out the rdma_conn_params struct is responsible for setting the
opposite side so we need to add it in the target side when accepting
connections.
Also, add a test to demonstrate target functionality when we overwhelm
the SRQ. It is useful to note that performance really tanks when you
start overwhelming the srq so it may be useful to use this test case to
check performance gains in edge cases over time.
Change-Id: Iac541bd9fc1d82eca9f21e7abc3f625663a6c460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the use of spdk_uuid_compare() to be consistent in the file,
also change the SPDK_INFOLOG to SPDK_DEBUGLOG to avoid the
repeated log messages for RESERVATION CONFLICT response.
Change-Id: I72fefbd520cefcaf25182c3ca3d21e3d87d17e94
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now Host can get an asynchronous event notification when
registrants were unregistered/preempted or reservation was
released from the associate namespace, Host can send
get log page to clear related log pages and reservation
report to get the full overview of current reservation
configuration.
Change-Id: Idc57c19812490c7536503308989871515e9f2361
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case of a DSM Deallocate (unmap) with multiple ranges, individual
bdev IOs are submitted for each range. If the bdev IO cannot be
allocated, the request is queued on io_wait_queue; however previously
submitted ranges may complete before memory is available for the next
range. In such a case, the completion callback will free unmap_ctx,
while the request is still queued for memory - causing a segfault
when the request is dequeued. To fix, introduce a new field tracking
the unmap ranges, and make sure the count is nonzero when the request
is queued for memory.
Signed-off-by: Yair Elharrar <yair@excelero.com>
Change-Id: Ifcac018f14af5ca408c7793ca9543c1e2d63b777
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447542
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were incrementing over the end of the descriptor list and assigning
undefined values to the rsp opcode in SEND_WITH_INVAL case. We were only
hitting this error when mixing sgl and inline requests in the same
workload. We were just by chance hitting a four bit value that was set
to all 1s from the in capsule data from the last request.
Change-Id: Ied06356f3d22fa34a2cd869dfad6bdca8720791d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
