This should make it easier later to group matching
result files when parsing results.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8d3c5641c8b71b6027e1f200ce53426a46e5234d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15466
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Run additional measurements (PM, SAR, PCM, BWM-NG, DPDK mem)
for each configured test run.
For example: until now if fio parameter "retry" was set to 3
fio would run the workload 3 times, but additional measurements
would only be done for the first run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5a8aaa8eeb28f2a24f47a41650f9e2bd14a298dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15380
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enable PM measurements by default.
Delay time and sample count variables are now taken
from fio ramp_time and run_time parameters, while
sample interval is hardcoded to 1 second.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibc08c690a8c8eea7591a5553b2478283c7574eec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15520
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Group and move all restore_* functions to classes
stop method.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I92cde5865a28343dbace702f54e4e06e4c2ba6cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14855
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If a lot of qpairs are connected all at once, the
RDMA optimal_poll_group logic does not work correctly,
because it only accounts for qpairs that received
their CONNECT capsule. Now that we have a counter
for a poll group's unassociated qpairs, use that value
to supplement the current io qpair count.
We can just assume for now that all of these unassociated
qpairs are io qpairs. That won't always be true, but
for purposes of picking the optimal poll group it is
sufficient.
Note that for RDMA, we could increment the counters
based on the RDMA qpair ID in the private data in the
rdmacm connect, but to keep the code simpler and common
across all transports, we defer the accounting until
after receiving the CONNECT command, so that it is
the same for all transports.
Fixes issue #2800.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5897d6ebac23d3b78b100e3fef5a7f9fb5304820
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15695
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use a local variable to hold the qpair count.
While here, also use pg_current to get the min_value,
this is a bit simpler to read than things like
(*pg)->group.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I65771fb469f021e9e77b8a6c117841b8f4b66af5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15694
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We make decisions on how to pick a poll group for a new
qpair by looking at each poll group's current_io_qpairs
count. But this count isn't always accurate since it
doesn't get updated until after the CONNECT has
been received.
This means that if we accept a bunch of connections
all at once, they may all get assigned the same poll
group, because the target poll groups counter doesn't
get immediately incremented.
So add a new counter, current_unassociated_qpairs,
to account for these qpairs. We protect this counter
with a lock, since the accept thread will increment
the counter, and the poll group thread will
decrement it when the qpair receives the CONNECT
allowing us to associated with a subsystem/controller..
If the qpair gets destroyed before the CONNECT is
received, we can use the qpair->connect_received
flag to decrement current_unassociated_qpairs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8bba8da2abfe225b3b9f981cd71b6f49e2b87391
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Currently we use qpair->ctrlr at qpair destroy
time to decide if we need to decrement the
qpair's poll group's qpair count. But this is
not correct - these counters get incremented
when the CONNECT is received, but qpair->ctrlr
doesn't get set until later.
So add a new connect_received bool to the spdk_nvmf_qpair.
Use this instead to determine when we should decrement
the poll group qpair counters.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I174a0fda36c4558171953bf58f2f5117bc074f76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At least recent Linux guest VMs send SPDK_NVME_IDENTIFY_CTRLR_IOCS as a
matter of course. While this isn't supported in lib/nvmf, as this
doesn't represent an error, reduce the log level of the error message so
we don't spam the logs.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I095de3e4331b3912cbc457da6d722b9883ec7884
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Issue is found in the virtio_pci_scsi_dev_create() whose
error path is setting the vdev->ctx to NULL before the
destruct operation.
Change-Id: I4ab0fbe300f7413ad4503833088856aa3f4c0734
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15676
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Optimal I/O boundary causes I/O to be split in the nvme driver. This is
a problem for writes if write_unit_size > 1 because the split I/O may
not match the write_unit_size.
Fixes: #2791
Change-Id: I437e6cb6d8e2415658d5b46539feeacb5363fd46
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
NVMf target reports copy command support if all bdevs in the subsystem
support copy IO type. Maximum copy size is reported for each namespace
independently in namespace identify data. For now we support just one
source range.
Note, that command support in the controller is initialized once on
controller create. If another namespace which doesn't support copy
command is added to the subsystem later, it will not be reflected in
the controller data structure and will not be communicated to the
initiator. Attempt to execute copy command on such namespace will
fail. This issue is not specific to copy command and applies also to
write zeroes and unmap (dataset management) commands.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I5f06564eb43d66d2852bf7eeda8b17830c53c9bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14350
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
The correct SPDK thread is already contained in the poll group.
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Change-Id: I4eefe2ba60c77c01a866a693bccbb8affc8262ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes#2781
This patch fixes two issue causing segfault on r2t:
1. pdu buffer is allocated from immediate_data_pool, but data_buf_len is set as data_out_pool
2. task->desired_data_transfer_length is rewrite by iscsi_send_r2t, which causes a wrong calculated pdu->data_buf_len
Signed-off-by: melon.masou <melon.masou@outlook.com>
Change-Id: I151859afff7104f29ad7f0ec57a8479d88b742bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Enable PCM cpu, power and memory measurements as
default and make them run during fio workload.
Change-Id: I4d42cf9df8385bfaa3b5e8fac59283ef8be0e98b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
bwm-ng interface bandwidth monitoring is now enabled
by default. Samples are captured every second during
fio run_time duration.
Change-Id: I868f01d23e648e855161e6711236a68dcff8ff5a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Enable SAR CPU measurements by default.
Delay time and sample count variables are now taken
from fio ramp_time and run_time parameters, while
sample interval is hardcoded to 1 second.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icf2866820250dd6bbc5619b2777f6fe139f2a588
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Groupt variables used for enabling addtional
measurements together for better readibility.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If61de427294fea6ae9a2d5c53f74b6c9e5aa3e6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Use "allowlist" and "blocklist" options in JSON
configuration file to specify which NVMe drives
are OK to use when setting up Target side. If no
list is specified the user can continue with the
test and use all available NVMe drives by passing
"-f" option when running the script.
Previously the default behaviour was to use all
NVMe drives available in the system for test, which
could cause data loss on those drives.
This is a failsafe primarily aimed at KernelTarget
class, as SPDKTarget is already safer to use because
of existing checks in "setup.sh" script which must
be run prior to executing NVMe-oF performance test
script.
Change-Id: I5ff93672a92cb09f2aef8355542ad197d96e14e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14854
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
"log_print" was removed in previous commit and
switched to Python's logging module instead.
This line was probably a result of a faulty rebase.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I6bbb2c37a947d0169689a014b2e110884bb70fdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Added new API 'spdk_bdev_histogram_get_channel' to get histogram of
a specified channel for a bdev. A callback function is passed to it
to process the histogram.
Change-Id: If5d56cbb5fe6c39cda7882f887dcc9c6afa769ac
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Currently user can only use PgDn and PgUp to scroll pages,
which may be confusing.
Change-Id: I61632a9eba35bcc2c817d202935ef5999ba00bbb
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current issues:
-tab buttons do not show on app startup,
-interface not refreshing properly after closing help
window
Fix for the first bullet point is to change color pair ID
from 2 to 10 (the colors WHITE and BLACK were swapped).
The new helper function has been added to remedy the problems
with refreshing interface after the pop-ups close. It is being
called after details windows and help window are closed.
Fixes: #2793
Change-Id: Ic91fc1ea8f858869c658b7803f6116fc4738aa63
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently our docs do not specify apps that can be
viewed by spdk_top tool.
Change-Id: I32ce0e54e114a8a6a4ea135f61d7907062872398
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I0d38256afb918f1273def36b3d4915d5a1911df9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
They were missed by the initial set of patches which introduced this
header as a mandatory one across different types of files.
Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I3f9b37d41298c843e1648e72fe8593768ccd37e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.
git log --follow -C90% --format=%ad --date default <file> | tail -1
and then pull just the year from the result.
Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)
For intel copyrights added, --follow and -C95% were used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2ef86976095b88a9bf5b1003e59f3943cd6bbe4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
initialize_buffer() uses memset() with a static pattern
that won't be able to detect issues such as writing/reading
only the first iov entry.
This commit adds counter at the beginning of every block
to help detect such errors.
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I6c497c707c8ae6a279c0222fdd4a1cf398c3b34c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15582
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_daos_writev() had a typo where local variable `io` wasn't advancing
in a loop over iovs. To avoid such issues in the future, function argument `iov`
is used instead, there's no need for original value and it seems less error prone.
bdev_daos_readv() was updated as well to be consistent with bdev_daos_write()
Signed-off-by: Denis Barakhtanov <denis.barahtanov@croit.io>
Change-Id: I06d39f207c7b881aca950c5721f250c17d41c328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15581
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Print out the specific values in this SPDK_ERRLOG,
this can help to find where the error is.
Change-Id: I2a38aa2d4270e0bbf554ddb348a73d40967d1b16
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Related reference:
OPENSSL_hexstr2buf() does the same thing as OPENSSL_hexstr2buf_ex(),
but allocates the space for the result, and returns the result.
It uses a default separator of ':'. The memory is allocated by calling
OPENSSL_malloc() and should be released by calling OPENSSL_free().
Change-Id: I0d2b9b66a41e53f8b438470e59a478c17df2e1e6
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15647
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot
Use the string value instead of int in raid_bdev json info.
Rename raid_bdev_parse_raid_level() to match raid_bdev_str_to_state().
Change-Id: I135269fe6de0746e661828cb1d36514b082011bd
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Compression and decompression both start with an uncompressed file,
provided using the new -l command line option. The file is then
compressed in chunks according to the specified block size. Each
operation works on one chunk.
Change-Id: Ia7d3853627d938f73e6aa3ee09fccd11d9bca706
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Paul Luse <paul.e.luser@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
CalledProcessError was removed from common.py and
not moved to run_nvmf.py in:
https://review.spdk.io/gerrit/c/spdk/spdk/+/14740
Change-Id: Ib35c60aa779711f40c6fda990c721491ae000b43
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Michal Berger <michal.berger@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use 'direct' option for writing into network block device
and sync once after writing is complete.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib671a0562cdecfa5f89b41ff6226dd81709c6a3f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15526
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
1GB I/O is to enough to perform the test and saves
time in test execution.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4845d114d835b86dfc47051a97825d8cc1dc3d07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Use spdk_dd instead of plain dd to reduce test
execution time.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I54979b68b3c328aa9618e704e2bc55e794aa232c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15524
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
When doing debug build on ARM octeontx2 platform, if gcc version is
lower than 8.4.0, we may met following errors:
/tmp/cc0XoOUM.s: Assembler messages:
/tmp/cc0XoOUM.s:56: Error: selected processor does not support `casp
x0,x1,x2,x3,[x4]'
/tmp/cc0XoOUM.s:88: Error: selected processor does not support `caspa
x0,x1,x2,x3,[x4]'
/tmp/cc0XoOUM.s:120: Error: selected processor does not support `caspl
x0,x1,x2,x3,[x4]'
/tmp/cc0XoOUM.s:152: Error: selected processor does not support `caspal
x0,x1,x2,x3,[x4]'
This change is based on existing solution available for ARM Neoverse-N1
platform
Reference commit id - fcc3894
Signed-off-by: Sunil Shahu <sunil.shahu@dell.com>
Change-Id: I01fab06fc40a82416e6a650c64cc25a1cd2a5dc0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
