In test_nvme_free_request, there is valgrind error:
Conditional jump or move depends on uninitialised value(s)
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: I80f741cac9316d86b060419e3b6fb651fa018aa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11826
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
According to NVMe over Fabrics spec number of SGLs supported by the
controller is reported in MSDBD. But it is also implicitly limited by
command capsule size (IOCCSZ) since SGL are passed in capsule.
This patch adjusts max_sges to capsule size if required. Adjustment to
MSDBD is also moved to transport layer because it is fabrics specific
parameter and is not valid for PCIe transport.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I44918eb949345c61242ca50a524d21d04b6ac058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11669
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
With async connect, we need to avoid the case
where the initiator is sending the icreq, and
meanwhile the application submits enough I/O
such that the request objects are exhausted, leaving
none for the FABRICS/CONNECT command that we need
to send after the icreq is done.
So allocate an extra request, and then use it
when sending the FABRICS/CONNECT command, rather
than trying to pull one from the qpair's STAILQ.
Fixes issue #2371.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If42a3fbb3fd9d863ee48cf5cae75a9ba1754c349
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
SPDK can submit more commands to remote NVMf target than allowed by
negotiated queue size. SPDK submits up to SQSIZE commands, but only
SQSIZE-1 are allowed.
Here is a relevant quote from NVMe over Fabrics rev.1.1a ch.2.4.1
“Submission Queue Flow Control Negotiation”:
If SQ flow control is disabled, then the host should limit the number
of outstanding commands for a queue pair to be less than the size of
the Submission Queue. If the controller detects that the number of
outstanding commands for a queue pair is greater than or equal to the
size of the Submission Queue, then the controller shall:
a) stop processing commands and set the Controller Fatal
Status (CSTS.CFS) bit to ‘1’ (refer to section 10.5 in the NVMe Base
specification); and
b) terminate the NVMe Transport connection and end the association
between the host and the controller.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ifbcf5d51911fc4ddcea1f7cde3135571648606f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11413
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to NVMe over Fabrics specification (rev.1.1a) HSQSIZE sent
in RDMA_CM_REQUEST private data (ch.7.3.6.4) shall be the same as
SQSIZE later sent in Connect command (ch.3.3).
SPDK NVMe RDMA initiator adjusts SQSIZE to CRQSIZE received from
target in RDMA_CM_ACCEPT private data. Target is allowed to send
CRQSIZE < HSQSIZE if RNR retries are used. So, it is possible that
SQSIZE sent by SPDK will be lower than previously sent HSQSIZE. There
are targets validating this match and they reject connection from
SPDK.
Linux kernel NVMe initiator doesn't perform such adjustments and
connects well to such targets.
This patch aligns SPDK behavior with specification and Linux kernel
implementation.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I01968d1c07d284396fa5939932d85841351d7a45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11350
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed afterwards. An already initialized mutex should not
be re-initialized.
Add calls to nvme_ctrlr_construct where nvme_ctrlr_destruct is
called without a matching construct.
Add missing calls to mutex_init and mutex_destroy as required.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I9753fa7fbd77402f23a08a66f4b489a5c229487a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
This reverts commit eb09178a59.
Reason for revert:
This caused a degradation for adminq.
For adminq, ctrlr_delete_io_qpair() is not called until ctrlr is destructed.
So necessary delete operations are not done for adminq.
Reverting the patch is practical for now.
Change-Id: Ib55ff81dfe97ee1e2c83876912e851c61f20e354
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10878
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Admin commands can be sent and polled from any thread, which also means
that the error injection queue on the admin qpair can be accessed from
multiple threads. Therefore, any modifications to that queue should be
done under the ctrlr lock.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib1ed194405cb5b93f65a007b9749fd4433dc367d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Fix warning: missing braces around initializer
This issue is seen with gcc (GCC) 4.8.5 20150623.
Warning like below:
nvme_tcp_ut.c:243:9: warning: (near initialization for ‘ctrlr.ns’) [-Wmissing-braces]
nvme_tcp_ut.c: In function ‘test_nvme_tcp_req_init’:
nvme_tcp_ut.c:525:9: warning: missing braces around initializer [-Wmissing-braces]
struct spdk_nvme_ctrlr ctrlr = {0};
^
nvme_tcp_ut.c:525:9: warning: (near initialization for ‘ctrlr.ns’) [-Wmissing-braces]
And more information from below link:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Change-Id: I88b5b3908d5d0daa9383e47a1ed53288f342ca3b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11137
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
nvme_poll_group_disconnect_qpair() is called only by a single place now.
We do not need the flag poll_group_disconnect_in_progress any more.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I8f9c0f14baa8fcb9b0637635a5bb3d34a8b11af5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_ctrlr_disconnect_qpair() calls nvme_poll_group_disconnect_qpair() if the qpair
uses a poll group, and nvme_poll_group_disconnect_qpair() calls
nvme_ctrlr_disconnect_qpair() if the state of the qpair is not DISCONNECTING.
This relationship made the code very complex.
A few patches starting from this patch simplifies disconnect and free qpair
operations.
This patch swaps the ordering of nvme_ctrlr_disconnect_qpair() and
spdk_nvme_poll_group_remove() in spdk_nvme_ctrlr_free_io_qpair().
This ensures the qpair is disconnected when spdk_nvme_ctrlr_free_io_qpair()
calls spdk_nvme_poll_group_remove().
This enables us to limit spdk_nvme_poll_group_remove() to be available
only for disconnected qpairs.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I0601a74f953a2efc4f177a51a4450baea33533d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10670
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding metadata support for io commands. Currently metadata is ignored
even if present in the cmd struct. Making metadata adress
readable/writable depending on data transfer bits. Adding extra unit
test to make sure metadata fields are populated.
Signed-off-by: Ahriben Gonzalez <ahribeng@gmail.com>
Change-Id: I1d01974a6b2831c82b43e94073065d235eea429a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10854
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We only populate active namespaces into the main namespace tree, so we
don't need a separate list of active namespaces too.
Change-Id: Iaf194f806cc1d9672f5567cff3dffafff3165069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since this is now sparsely populated, a tree is a better choice.
Change-Id: Ie66d913fa1d298de56a7d22ef55f0adf7f8803b8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10031
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some subsystems report a very large maximum value for the number of
namespaces, but in essentially every case the subsystem is sparsely
populated with active namespaces. To save memory, don't allocate
objects for the inactive ones.
Change-Id: I4cbeb5a7a898d3c685f4a3a9ec4c2ce45efffb92
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9898
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If nvme ctrlr is resetting or initializing, free_io_qids
bitmap is already freed or not created yet. In that case
an attempt to create IO qpair leads to segmentation fault.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6a97bf81d5a568db20d23b3f88cf01e994ba42e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
In current implementation RDMA qpair is destroyed right after
disconnect. That is not graceful qpair shutdown process since
there can be requests submitted to HW and we may receive
completions for already destroyed/freed qpair.
To avoid this, only disconnect qpair in ctrlr_disconnect_qpair
transport callback, all other resources will be released in
ctrlr_delete_io_qpair cb.
This patch is useful when nvme poll groups are used since in
that case we use shared CQ, if the disconnected qpair has WRs
submitted to HW then qpair's destruction will be deferred to
poll group.
When nvme poll groups are not used, this patch doesn't change
anything, in that case destruction flow is still ungraceful.
However since CQ is destroyed immediately after qpair,
we shouldn't receive any requests which point to released
resources. A correct solution for non-poll group case
requires async diconnect API which may lead to significant
rework.
There is a bug when Soft Roce is used - we may receive
a completion with "normal" status when qpair is already
disconnected and all nvme requests are aborted. Added
a workaround for it.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0680d9ef9aaa8737d7a6d1454cd70a384bb8efac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the one place this was called, we can call nvme_ns_construct
instead. There's no harm in re-fetching the identify pages.
Change-Id: I91292ff9650bdc7edd5588a05837b671dcac1922
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10102
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also we don't treat exceptions when getting INTEL log pages
as a fatal error, the initialization will still contine.
Change-Id: Ic2fd2be510fde2679c1546482934d0a180266936
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10341
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move the CONFIGURE_AER state before SET_KEEP_ALIVE to
make sure that we run the CONFIGURE_AER state for
discovery controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia4e24f6507c43e3fece06b9161ff8e0b8fa0e97d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Discovery services using the SPDK nvme driver may
use long-lasting connections that detect AER completions
to determine when there are changes in the discovery
log. This means that we still need to send keep alives
on discovery controller admin queues. So move the
SET_KEEP_ALIVE_TIMEOUT state immediately after
IDENTIFY, and run the SET_KEEP_ALIVE_TIMEOUT state
even for discovery controllers.
Note, we need the IDENTIFY's KAS value to properly
set the keep alive timeout, so we have to keep the
IDENTIFY state before SET_KEEP_ALIVE_TIMEOUT.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c6403c28fb72d42629c5f9009a89c4bfd44d162
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10329
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For DSM command, the NVMe drive may take a long time to finish it,
if we set a small timeout value for DSM command, the bdev/nvme module
will try to reset the IO queue pair when timeout happens,
in `spdk_nvme_ctrlr_free_io_qpair`, we will abort the outstanding
IO requests first, then in the `nvme_pcie_ctrlr_delete_io_qpair`,
we will poll the CQ for any requests that have been completed by
the NVMe controller, if there are NVMe completions in the CQ,
we will finish them again, thus double completions happened.
Here we rename `nvme_qpair_abort_reqs` to `nvme_qpair_abort_all_queued_reqs`,
so the common layer will just abort queued request, and let each
transport to abort outstanding requests case by case.
Fix#2233.
Change-Id: Icae6214239160c615418cb514fc51cfe77b59211
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was sometimes used as the maximum array index and sometimes as the
maximum count. Make it consistent everywhere and give it a better name.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I518efd99a7d36584624490b0b3497bb6e81ce9ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10101
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This meant to zero the entire active namespace list.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I2da2293b53acd57d3480cf93b052eb1520de35d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10028
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The qpair's state member is only 3 bits of a uint8_t,
and the in_completion_context bit is another bit in that
same uint8_t.
We know that the qpair's state is only ever updated by
one thread, but it is possible that the state could
be modified by one thread, while another thread
is modifying in_completion_context.
in_completion_context is only modified by the thread
that is polling the qpair (or the qpair's poll group).
But with async mode, another thread that has a qpair
on the same PCIe controller could poll its adminq and
reap the SQ completion for the qpair that's owned by
the other thread.
So do *not* set the generic qpair state to CONNECTED
from the SQ completion callback. Instead just set
the pcie_state to READY, and let the thread that owns
the qpair detect the qpair is READY and set the state
to CONNECTED itself.
Fixes issue #2157.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9efc0c954504f1841e1c3890ae78211ad0d1990e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9975
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
In some cases a single virtually contriguos memory
buffer can be translated to several chunks of memory.
To make such translation possible, update structure
spdk_memory_domain_translation_result to use a pointer
to iovec.
Add a single iov structure or cases where translation
is always 1:1, it will make easier translation callback
implementation. For RDMA transport translation of address
is always 1:1, so treat iovcnt other than 1 as an
error.
Change-Id: I65605575d43a490490eba72c1eb19f3a09d55ec6
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9779
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Push operation complements existing pull
operation and allows to implement read data
flow using memory domains.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Change-Id: I0a3ddcb88c433dff7a9c761a99838658c72c43fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9701
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new name suits better to the following "data push"
operation
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ic3249f65de203f375477f8e87b0749b9502d165c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9878
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When data digest is enabled for a nvme tcp qpair, we can use accel_fw
to calculate the data crc32c. Then if there are multiple
c2h pdus are coming, we can use both CPU resource directly
and accel_fw framework to caculate the checksum. Then the datao value compare
will not match since we will not update "datao" in the pdu coming order.
For example, if we receive 4 pdus, named as A, B, C, D.
offset data_len (in bytes)
A: 0 8192
B: 8192 4096
C: 12288 8192
D: 20480 4096
For receving the pdu, we hope that we can continue exeution even if
we use the offloading engine in accel_fw. Then in this situation,
if Pdu(C) is offloaded by accel_fw. Then our logic will continue receving
PDU(D). And according to the logic in our code, this time we leverage CPU
to calculate crc32c (Because we only have one active pdu to receive data).
Then we find the expected data offset is still 12288. Because "datao" in tcp_req will
only be updated after calling nvme_tcp_c2h_data_payload_handle function. So
while we enter nvme_tcp_c2h_data_hdr_handle function, we will find the
expected datao value is not as expected compared with the data offset value
contained in Pdu(D).
So the solution is that we create a new variable "expected_datao"
in tcp_req to do the comparation because we want to comply with the tp8000 spec
and do the offset check.
We still need use "datao" to count whether we receive the whole data or not.
So we cannot reuse "datao" variable in an early way. Otherwise, we will
release tcp_req structure early and cause another bug.
PS: This bug was not found early because previously the sw path in accel_fw
directly calculated the crc32c and called the user callback. Now we use a list and the
poller to handle, then it triggers this issue. Definitely, it will be much easier to
trigger this issue if we use real hardware engine.
Fixes#2098
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I10f5938a6342028d08d90820b2c14e4260134d77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9612
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Abort any queued admin requests once admin queue gets enabled. A request
can get queued if a controller is being reset and it gets submitted
while admin qpair is being reconnected. If these requests aren't
aborted, the init process will stall, as requests don't get resubmitted
while controller is resetting and subsequent admin commands required for
the initialization would be queued too.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If456a297d2d434b3cc741816cbfb13b01d37e963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow to return more than one memory domain.
This change aligns bdev and nvme API and provides
more flexibility for custom transports.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ica9b12ad8463c361be6cb62ee2c0513eec0b486d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Enable dump of transport stats in functional test.
Update unit tests to support the new statistics
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I815aeea7d07bd33a915f19537d60611ba7101361
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8885
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Renamed nvme_qpair_abort_reqs() to nvme_qpair_abort_reqs_with_cbarg() to
highlight the fact that it only aborts requests with specified cb_arg
and to distinguish it from _nvme_qpair_abort_reqs() which aborts all
requests immediately.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I32fec5ab0501b1beb8605689d73ec42a6424fba5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9323
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This removes some code that was duplicated in the
CHECK_EN and DISABLE_WAIT_FOR_READY_1 states.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie5d175540f71c692f7784c7ff22a48f34b9b7082
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8614
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added mocks in preparation for making the NVMe controller initialization
use asynchronous versions of the register operations.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifbcc3c73933fb965db710389fec8cd2d52886d4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8610
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It will make it easier to support asynchronous register set/get
functions.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9915609ff940596ae4d67388238cc685dfa426fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Poll group holds lists of qpairs in different states and
when we got rdma completion with error, we iterate these
lists to find a qpair which qp_num matches. qp_num
is stored inside of ibv_qp which belongs to spdk_rdma_qp
structure. When nvme_rdma_qpair is disconnected, pointer
to spdk_rdma_qp is cleaned but qpair may still exist in
poll group list and when we start searhing for qpair by
qp_num we may dereference NULL pointer.
This patch adds a check that pointer to spdk_rdma_qp
is valid before dereferencing it. To minimize boilerplate code,
wrap all check in macro. Add unit test to verify this fix.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I1925f93efb633fd5c176323d3bbd3641a1a632a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
John Kariuki tested this patch on a system with
several Intel P5800X Optane SSDs, to determine the
performance impact of adding these two
spdk_trace_records() in the main NVMe I/O path.
The pathological case (512B random reads on a single
Xeon core) decreased from 13.10M to 12.88M, or 1.7%.
Normal workloads (4KB+) would incur a smaller penalty
since the I/O rate would be much lower - maybe even
unnoticeable..
This is a really valuable tracepoint to have enabled
by default, so I think this small amount of degradation
is acceptable.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie2543cadf3541eb74398d31ac0f495522ab49ec0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9303
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If NN is very, very large, this allocates too much memory. For now, just
use a list.
Change-Id: I904977673d8fb6c86f03c94ba798c6cc07f4a4d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be done immediately after receiving the controller identify
data for now.
Change-Id: I527a44c4d1f4d3ad2eeb8fc77e07086c2358cac3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Split the connection process across two states, which allows the
transport to connect the admin queue asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie84477331df0abf5ffdfc2a0ff5d5ada760c9e73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The fabric connect command is now sent without. It will make it
possible to make `nvme_tcp_ctrlr_connect_qpair()` non-blocking too by
moving the polling to process_completions (this will be done in
subsequent patches). Additionally, two extra states,
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_SEND` and
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_POLL`, were added to keep track of
the state of the connect command. These states are only used by the
initiator code, as the target doesn't need them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25c16501e28bb3fbfde416b7c9214f42eb126358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
