Merge detection functions into a single one where all supported
devices are picked up and exposed in the environment. Be verbose
about what's been found for given tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I780c5e480c301dbb92092074f927a731ed2680b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7849
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
By default, clang uses static sanitizer libraries, which means that the
executable needs to have them linked in. Since we don't control how the
fio binary is compiled, we need to use the shared libraries.
This patch fixes ubsan, but there are still some issues with clang's
address sanitizer. It seems as if the address sanitizer ignored
some/all of the suppression rules, but in the interest of fixing the
ubsan build, this will be fixed by a separate patch at a later time.
Fixes#2367
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I416a410214826b4ef8c25eeeef95272ef1742d7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11662
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jun Wen <junx.wen@intel.com>
The two functions running fio with different plugins (bdev, nvme) are
identical except for loading different plugins, so it makes sense to
extract the common code to a separate function.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I151668bbefe18f3cacc82ae98b081e662a5fe231
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
To compile contigmem and nic_uio in DPDK the `enable_kmods`
flag has to be enabled in meson. This is required for FreeBSD.
This is done in dpdkbuild/Makefile for the submodule,
but is needed in build_native_dpdk() for upstream DPDK tests.
While here, removed comment in autotest_common.sh that refered
to patch that was already upstreamed to DPDK. See:
https://review.spdk.io/gerrit/c/spdk/dpdk/+/2534
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2ee17ed5b62291881e64b687c642a81993e03e36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11238
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The common file is sourced in all test scripts, so it
is ideal place to put all library paths.
It will make changes to those paths simpler in next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic37148e6be669f296e8561d6554e735132941413
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6685
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This breaks the flow of EXIT traps that use this function together
with errexit. Consider:
set -e
trap 'killprocess $pid_not_found; nvmftestfini' EXIT
...
if killprocess() suddenly exits the remaining parts of the trap won't
be executed.
Also, if the process is not found, allow killprocess() to return
success - if it's gone then the main goal of the function is already
achieved. If the process terminated abruptly errexit should pick that
up regardless.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I93c00c2a2da5457affb2ed2b5bf0ebae9c4bf291
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10853
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should gather the core regardless of the RLIMIT_CORE setting.
Also, don't limit number of parallel executions of the collector
in case more than 2 processes crashed (unlikely to happen anyway,
but just in case make sure we cover it). Lastly, wait a bit longer
for the potential cores.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic7de8f8000676122282469b729f45b235ab6f9ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add test script for launching VMs with vfio-user transport,
this test script not active until vfio-user capable qemu available,
new flag SPDK_TEST_VFIOUSER_QEMU will decide case whether to run.
Change-Id: I9b885cec797fe3bb28860f1ec436c31a6fa2f131
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10096
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Our tests, especially those which use nvme block devices for various
use-cases, won't be able to perform successful IO on such devices.
The idea is to skip them for now and introduce basic, dedicated,
tests for zoned nvmes in oncoming patches.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I67baad5c85c662921e3327f2101180283c89e96c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9181
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's been some time since SPDK switched from ini to json,
there's no much benefit from keeping these tests around.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0cf7fcd6587abe872553211e41bee12e14bf234f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I713b2908fb124c76380b66659a1f646548fe1b70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10205
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is part of test/nvmf/common.sh which is not included
in the test/common/autotest_common.sh. This makes autotest_cleanup
unusable unless parent script sources test/nvmf/common.sh directly.
To make its scope more obvious, put the revert_soft_roce() inside
autotest.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id8a8cf448d73abb6fe924b452f984f6e5381266f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10206
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This makes it compatible with the FreeBSD version.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I99707f07f8a74e5ca90074bfc69bdaa524ed2ad4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10207
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is needed since fio, by default, links to libtcmalloc if found
during the build. See:
01fe773df4Fixes#2192
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1de8fe9d489f92acb79ef0f169229a6c09ce1179
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9822
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By default on Linux, we hardcode HUGEMEM=4096. But some
environments (like VMs) may not have enough memory to
allocate that much hugepage memory, and the user may
want to run some test scripts that don't require that
much memory.
So allow user to specify HUGEMEM in their environment
before calling a script that uses autotest_common.sh.
If it's set, it will use the specified value,
otherwise default to the values used prior to this
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6e441ed2d703a04430305ad712903a7fa41190c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9726
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The list may end up being quite big due to the number of executed
tests so drop it from the log.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id9f2823be053a7ab8c03d95830d3f63f6f5aa4d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9459
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is done to get rid of this:
autotest_common.sh: line 384: [: -ge: unary operator expected
This happens for older libiscsi which doesn't define
LIBISCSI_API_VERSION in the iscsi.h.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I658ab2936e161d648fc301fadcc510b84a61d916
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8710
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Previous expansion was assuming there's only one instance of "test/"
string in source's path but this is not really the case on phy
systems running in the CI. Instead of relaying on the string pattern
of the path, simply disect it into basename_dir/source. So e.g.:
/home/vagrant/spdk_repo/spdk/autobuild.sh -> spdk/autobuild.sh
/home/vagrant/spdk_repo/spdk/test/nvmf/common.sh -> nvmf/common.sh
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6f458566547dcaf5508263b2b19f4e1bc0de4f32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9c01e786c4d9df1b5a0f61b0ab354a3fd2546672
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9085
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I8f21f6f9a1cf837931646a7458f0ad8147cf6810
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8646
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It seems like there's some race in the kernel when we try to
delete_controller (nvme disconnect) right after the new nvme subsystem
is connected. This results in a block subsystem left with lingering
nvme devices which are not usable and which start to affect the nvmf
suite. They also can't be removed either unless the kernel is rebooted.
To workaround it make sure that we wait long enough for all of the
subsystems to be in a sane state before we attempt to stress
the connect<->disconnect path.
Mitigates #2060.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9299ecfc760e334504730aab6f19d338fad88081
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9059
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The argument is meant to be SERIAL so the last check may erroneously
force waitforserial_disconnect() to report success if lsblk is not told
to include serial of the device in the output.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iee591597140658b1e611a84e65b280c565eecdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9057
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In particular, non-volatile cache setup and EXTENDED fio tests:
these haven't been supported nor tested by the CI, thus there's
no value in keeping these routines anymore.
fio tests are limited to what was previously called as a "basic"
suite and hooked to standard SPDK_TEST_FTL flow.
Code which is not used by the remaining tests is removed as well.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I865da1ea4d8743322d4c303908c598efe6ecd40b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8294
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Trace details are written out only when test fails, but sometimes
it's hard to determine from which script and what particular line
given command is being executed during the actual runtime of the
test. This should make it a bit easier. The log lines would look
like this:
-- common/autotest_common.sh@1217 -- # uname -s
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iac6973f986e6c553f39e5a9c909ccabf607251f7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SC2269: This variable is assigned to itself, so the assignment does
nothing.
Since the --id check doesn't change the value of $id, remove it
completely. This simplifies the process_shm() so the --id type is
considered to a be default and $id changed only in case --pid was
explicitly requested.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If8a4a43c6822fa1b32217a0b783cb96d0fee2644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8502
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is relevant mostly for the VMs. Allocating that much memory puts
a lot of pressure on remaining pieces of the system as currently we
allocate total of 12GB memory per VM instance in the CI pool. Default of
4GB hp should be enough to cover majority of the tests hence if there's
any suite that requires more memory, setup.sh should be called there
directly with an optimal value.
This is done to make sure we can accomodate proper resources in the CI
by knowing what are the actual requirements rather than just blindly
allocating "as much as possible".
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie958c518c7ed702b068c7fc9042183fdf41aa816
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This helps ensure that not only is the bdev available,
but that it has been fully examined by any upper
layer bdev modules before returning from this
waitforbdev function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7b69bb35199c08a4ccaa9c7ea9429d82b16ac46c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Source Windows specific definitions from common.sh. These adjust
uname to report the operating system as WSL, Msys or Cygwin and the
kernel name as Windows. They also define kill() to invoke the SIGTERM
handler before causing a hard stop with TerminateProcess.
Adjust the ordering of the 'source' commands in autotest_common.sh so
that the config definitions are available when common.sh is loaded.
Define MAKE, MAKEFLAGS and HUGEMEM for Windows.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I130b892ee55c925a0b033bda271a29133993afb7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was added only for testing purposes. Right now it just
unnecessarily makes the build logs bigger and spams the stdout.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id8ff3e1dfde955dc118e0a202897d6c6634c3995
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8194
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case IFS was modified in the environment where print_backtrace()
was called, it could impact the cmd substitution used for seq'ing
the main FUNCNAME loop. Example:
========== Backtrace start: ==========
/home/vagrant/spdk_repo/spdk/test/common/autotest_common.sh: line 980: 1
2
3
4: syntax error in expression (error token is "2
3
4")
Avoid that by resetting the IFS to its default value, but also,
replace said $() with arithmetic evaluation to avoid it altogether.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I4ab098319dfae3a5356eb4fe0dbf9f4af2d2eea6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Consider this:
foo() { echo bar >&2 ; }
set -x
foobar=$(foo 2>&1)
[[ $foobar == "bar" ]]
The above test will fail since $foobar will also include tracing
strings as stderr is where set -x redirects the output. Since in
some cases this may troublesome, replace stderr with a dedicated
fd allocated dynamically.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia6609e4463b371c07fab42d2bd291c9e43742df5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8158
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, move ocf build outside the autobuild suite to make sure
scanbuild also picks up all the pieces.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5f0de407cc55b1dc153cc856f68e053a54fc0682
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6841
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replace old '/home/sys_sgsw' location by new created
'/home/sys_sgci/spdk_dependencies'
Also update readme with current user name.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ifcea15f704183c7ae0044ee02bd28b6bd891b262
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Also, create a common dir which will hold symlinks to all existing
plugins used in the tests. Location of the actual lib is not changed
so the relation to the given test suite is clearly preserved.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icb70bbc61fbfa3325a357d5dd93f554ff132a3b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7146
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows to pass to rpc_cmd() sets of commands via stdin. E.g.:
rpc_cmd <<-CMDS
bdev_malloc_create -b Malloc0 32 512
bdev_malloc_create -b Malloc1 32 512
bdev_malloc_create -b Malloc2 32 512
CMDS
Since rpc.py is already running in a server mode, this is slightly
faster than grouping commands and running scripts/rpc.py directly.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I29fbcf3f2751400980d35b4de2cce2da1cd2bf2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unittest job is now split into three smaller jobs, each of them
requires unit tests to be built.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ibc0dfbf6f7395a9dfe23242b532fb5cb1f8dd8f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Users can use "--with-vfio-user" to enable it when testing it.
For CI configuration, we add a new test flag SPDK_TEST_VFIOUSER
to enable CI tests.
Change-Id: Id284df721171d01cc52491ebf4088bcc17eee147
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6139
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This also introduces scheduler tests in the autotest pool.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I892a2374e21dab0e349c655dcafaa4cc2e45fdc1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5741
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK 20.11 moved the kernel modules to separate
dpdk-kmod repository. It has to be built separate
from DPDK.
If needed for testing vm_setup.sh script now contains option
to build this driver.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98a5eb956eb0cc60ec402d88fcdbd66d4854f19a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6033
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Due to recent change to vm_setup.sh we now expect
this module to be already provision in system and
available under /lib/modules.
Change-Id: Ica40e7ad95710f44bf538919e7a65878f416b7e4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is done in order to track core dumps in a more efficient
manner. Till now, some cores could be missed if the binary was
executed outside of the cwd of the autotest (i.e. outside of
the spdk repo) but which was part of the critical path of the
actual test (e.g. fio in vhost-initiator tests). Also, since
core_pattern was set to plain "core", impact on the underlying
storage wasn't controlled either - if core was 20G in size,
this is what we would get. This could easly exhaust storage in
case error-prone patchsets were submitted on the CI side.
The collector will try to mitigate all the above by doing the
following:
- collecting all the cores, regardless of their cwd
- limiting size of the core to 2G
- compressing the cores (lz4)
Also, limit of 2 collectors executing at once is set - if more
processes crashes at approx. the same time, they will be logged
in the kernel log instead.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5956a9030c463ae85a21bfe95f28af5568c5c285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I5226c58f9993e0d1d8665ac75930ea952e474f05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
