SPDK test script can fail during any point of the
execution. To keep using the same devices
between test runs in CI, those devices have to
be cleaned between runs.
To select device for tests or to clean before tests,
the partition table and lack of mount points is used.
SPDK GPT partitions were always considered not in use.
Meanwhile Linux GPT were not, even if lacking a mount
point.
Some of the SPDK tests create Linux GPT partitions,
which might remain after a test run.
Linux GPT partitions created during tests now contain
"SPDK_TEST" as part of their partition name.
This allows marking such block devices as 'not in use',
to be cleaned and used in further SPDK test.
fixes#2345
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0098776239da9b0c5dcc748625485284e4863525
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11220
Reviewed-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Our tests, especially those which use nvme block devices for various
use-cases, won't be able to perform successful IO on such devices.
The idea is to skip them for now and introduce basic, dedicated,
tests for zoned nvmes in oncoming patches.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I67baad5c85c662921e3327f2101180283c89e96c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9181
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id22c28c46a5fbdf5bd76b31d16f07f2672dfe14e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9306
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is mostly relevant for making sure the nvme drive used for gpt
test is cleaned up. To that effect, replace dd with wipefs to make
sure all signatures are wiped and kernel updated with the changes.
Also, since gpt test is not supported on FreeBSD don't try to run
it from autotest.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic970026363a6269f85b63e713f4187268fd6f923
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9290
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I5120baff8d2de3ef639d7b3c66d51002838c3f3c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8439
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_bdev_wait_for_examine() API to be called
in order to report when examine on all registered bdevs finished.
It will be built in to most bdev modules RPC.
New RPC added to allow
- building it into bdev submodule
- user/orchestration to verify examination status manually
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27db3ae42eea3e692faeea4c2a01d04586bff438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5480
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
gen_nvme.sh will no longer generate the legacy configuration.
"--json" option will still work for any current users of the script.
Tests were modified to no longer use the "--json" option.
Meanwhile others were simplified with switch to "--json-with-subsystems".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8450be98660e54c64c27d8401fc40d649f9403ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This removes all the sleeps called after setup.sh reset. These
sleeps were meant to wait for devices given tests depend on.
Change-Id: Ibb86c9f6f8d5f1b05d165e84d9019530af84f9ea
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4035
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test steps were disabled due to issue #1146.
Which has since been resolved by patch:
(991a56f) fio: Continue polling spdk_threads on the init thread after shutdown
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id5c2849a94b23e95bb222b8a70c538f392896a30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Purpose of this flag is sketchy at best.
Failing tests should be either fixed or disabled/removed.
Running separate job in hopes of it fixing itself,
might not bring the expected outcome.
Case in point - test case in this patch
was added to this flag over a year ago.
This is last remaining test case under this flag.
So there is no need for it to exist.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8481ac7102245889047dde083b34276d22271a03
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is to avoid spammy stderr comming from ceph/stop.sh:
+ umount /dev/loop200p2
umount: /dev/loop200p2: not mounted.
+ losetup -d /dev/loop200
losetup: /dev/loop200: detach failed: No such device or address
Change-Id: Id1ecfc5da1a530c63d454bfacc8fb36c29549f8e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1006
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Additionally, part_dev_by_gpt() is dropped in favor of having entire
gpt setup done from within the setup function.
Change-Id: If026215138f2de20176ebc920a2427c18de991b5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The function is almost 20 lines long and it essentialy
appends two lines two a specified file. We don't need it.
Change-Id: I565de8e54aa71b04f15745456bec7b2b3b8fc178
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Overwrite ini config with json and use it in such a form throughout
the entire test run.
This patch is the beginning of the series targeting conversion of
ini config to json in blockbdev tests.
Change-Id: Ic64f24b2ea9df85ad1ba3d038a78384e6f2badf9
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The hardcoded path is replaced with $CONFIG_FIO_SOURCE_DIR as defined
during the compile time.
Additionally, all checks which determine if fio is available are now
based on $CONFIG_FIO_PLUGIN=y knob instead of the presence of the fio
repo.
Change-Id: Ie469747f3863c9561f53d32e8c3f29778afaaf74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We've now supported ZCOPY io type and Malloc bdev will use
ZCOPY for the read/write operation. Add the support for the
test case of Malloc with ZCOPY operation.
Change-Id: I291fc9ef82b1eae800c97c5a6b7a0c810c357fe0
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Now we can actually know which tests we are running on which bdevs when
we call blockdev.sh. Removing the conditionals from the configuration
setup (or failing if they don't succeed) and then calling run_test from
the top level allows us to reliably track the bdev tests and fail if
they don't run on a desired class of bdev.
Change-Id: I14e6e3d993b4af4995adcbc5f138bac4ae9d63be
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some bdevs don't support unmap so they may not be able to run the fio
unmap tests. In case none of the bdevs we are testing support this
operation, the test will be skipped.
Change-Id: I5063297f0378bc87abf50e5311d147251cfe0ad9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This allows us to run the NBD tests on any combination of bdevs
based on the flags passed to the script. Previously we ran the tests
on a specific grouping of bdevs and opted to only free one type (passthru)
over RPC after the test ran. Rather than free all bdev types in the new
implementation, I opted to not free any of them via RPC and rather allow
the application to close them at termination time.
Change-Id: I574db4f941bfbb073cceed4610e1f5d43028569f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478246
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just to make sure that we always test against a valid bdev.
Change-Id: I7c9786f32b8d5ff5f2bf9c86151fb7f2bdfdf5f3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478245
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, we only ran bdevperf tests against GPT partitioned NVMe
drives. These tests are generally applicable and should be run against
all of the bdev types we support.
So long story short this configuration file isn't needed and we can just
get rid of it.
Change-Id: Ia6ded22ce16fc1f76b7d99643b9d37e3ecbd1c60
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow us to parameterize the blockdev.sh script and call it
individually from different jobs.
Change-Id: I8585c12dedfb1a32ea206a09a544440d2e794d4b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478242
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Previously, we conditionally ran one test in per patch, and another in
nightly tests. However, the only difference between these tests was the
configuration options sent to FIO. All other tests in the build pool
follow a pattern where they simply change the options and run the same
test in nightly and per-patch.
Following that pattern makes it easier to set a specific list of jobs
that must be run before a tet run is considered complete.
Change-Id: I6b2f49114155fdfa1d1e07faf45f03e64572eeb8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Currently the blockdev.sh tests fail due to using a GPT partition on the
hello_bdev portion of the test. On some of the test machines, sgdisk is
not installed, so they silently fail to create the GPT partitions that we
were trying to use.
This change is only geared towards fixing the current nightly failure in
the bdev tests. It does not address the test machines silently failing to
create GPT partitions.
fixes: issue #1107
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If58201ff4eb7dce9a44e2f93dfe25601ad1b508a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477611
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a significant simplification to the whole test script. Note, it
does force us to run the hello_bdev example against a gpt bdev instead
of an nvme bdev directly, but I see this as an acceptable tradeoff since
it seems like the purpose of running the hello_bdev example is mostly to
ensure that the example itself is not broken.
Change-Id: I8c2a1ede8e7ece2a82222593a7ae46704cc658af
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
