From SAM-4, section 5.13 (Sense Data);
“When a command terminates with a CHECK CONDITION status, sense data shall be returned
in the same I_T_L_Q nexus transaction (see 3.1.50) as the CHECK CONDITION status. After
the sense data is returned, it shall be cleared except when it is associated with a unit
attention condition and the UA_INTLCK_CTRL field in the Control mode page (see SPC-4)
contains 10b or 11b.”
SPDK does not set UA_INTLCK_CTRL to 10b or 11b, so we set the unit attention condition
immediately against a single IO or Admin IO after reporting it via a CHECK CONDITION.
Once the failed IO received at iSCSI initiator side, it will be retried. In the case of
resize operation, if there is no IO from iSCSI initiator side, the unit attention
condition will be delayed to report until the first IO is received at the iSCSI target
side.
Meanwhile, we clear the resizing (newly added) flag on our SCSI LUN structure after
first time we report the resize unit attention condition.
The kernel initiator won’t actually resize the corresponding block device automatically.
It will report a uevent, and then you can set up udev rules to trigger a rescan. SPDK
iSCSI initiator will automatically report the LUN size change.
Change-Id: Ifc85b8d4d3fbea13e76fb5d1faf1ac6c8f662e6c
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
There's no need to keep polling with iscsi_bdev_conn_poll() when the request
list is empty, as new requests already restart the poller when needed.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Iec5553f8c14d32e894989c9f7a448b6817a821b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev layer can do the unmap split now based on the backend
device. For now we only use 1 unmap descriptor, the bdev layer
can help us to do the split.
Fix issue #1888
Change-Id: Iaf740bafd4f2bb4b108133fee2aafd2f53da9b2b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7519
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also free scsi_task data structure for the asynchronous
libiscsi APIs.
Change-Id: I0bff706bfb795e51a4b10c357913ae66493dca5d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7513
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
This request was getting leaked previously.
Change-Id: I6e7dc24c92d7bae7a8df54025d61eb391a569df9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1591
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If thread A is the first to grab a channel, the poller will be on thread
A. But then if the shutdown happens such that thread B is the final
channel to release it's channel, it will attempt to free the lun poller
from thread B and crash.
Change-Id: I354f9f28d55e5e82cb6c737c734acadbd80e283d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1590
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.
Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
