When generating a discovery log page, we will add entries
for the discovery subsystem for all listeners except the
one associated with the controller that generated the
log page command. We do this comparison using
spdk_nvme_transport_id_compare().
But this function compares the subnqn of the trid, and
the subnqn is not set in either of the trids that we
are comparing.
The listener's trid always has an empty subnqn, but
the source trid has an uninitialized subnqn when
we do the comparison. This means that sometimes the
subnqn may be empty (which always happens in debug
builds) but sometimes may contain garbage. This
means that sometimes an entry would be added to the
log, even for the trid of the discovery controller
that generated the command (meaning the discovery
controller would end up referring to itself which
is not allowed).
There is an even more subtle issue with this. If the
host reads just the log page header, the nvmf target
generates the entire log page, and just returns the
header contents. Let's say in this case, the source
trid has an empty subnqn, so we don't generate an entry
for it, and report numrec = X and genctr = Y. Then
the host reads the X log page entries. But now the
source trid is garbage, so a discovery log page entry
is returned, replacing one of the "real" log page
entries. And since genctr didn't change, the host
thinks the data is all valid, meaning there's a log
page entry for an NVM subsystem that ends up getting
dropped.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I96cfc566ddaf17153aec089bf3d9b3480bec3e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_close() may not complete synchronously.
Then the following scenario is possible.
ctrlr_disconnected_qpair() calls spdk_sock_close(). Then any request may
complete and call _pdu_write_done(). qpair is still associated with a
poll_group and is inserted into the group->needs_poll list.
After ctrlr_disconnected_qpair() completes, disconnected_qpair_cb() is
called. disconnected_qpair_cb() calls spdk_nvme_ctrlr_free_io_qpair().
spdk_nvme_ctrlr_free_io_qpair() calls spdk_nvme_poll_group_remove().
spdk_nvme_poll_group() removes qpair only from the
group->disconnected_qpairs list.
Even after qpair->poll_group is nullified, qpair is still in the
group->needs_poll list.
Then spdk_nvme_poll_group_process_completions() polls all qpairs in
the group->needs_poll list and hits the assert.
Fixes the issue #2390
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I6ede8bd3b7b1a57a34ac61436159975ab6253fbe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11882
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The root ports might have been configured by some other driver (e.g.
Linux kernel) prior to loading the SPDK one, so we need to clear it. We
need to before the scanning process, as it's depth-first, so when
scanning the initial root ports, the latter ones might still be using
stale configuration. This can lead to two bridges having the same
secondary/subordinate bus configuration, meaning that their config space
would map to the same memory area, which, of course, isn't correct.
This has manifested in issue #2413, where two root ports were configured
to use the same secondary bus. This caused an endpoint device to be
enumerated twice on two different root ports, with the first instance
being broken once the second port was configured by the SPDK driver.
Fixes#2413
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5ce0931a84c1d23ccadb93fe39e8155ff1281474
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow to use these functions without having to instantiate an
instance of vmd_pci_device. The following patch will use this to
perform some initial clean up before the scanning process.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Icff92a4a429b259bec13eb6b0c1581aadbaae24d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11862
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently shadow doorbell updates are not counted; add statistics for
those, and rename the other statistic for clarity.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I211a77902e38265c99b15862034c6d022dc582a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11844
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_pcie_qpair_update_mmio_required() is only called for QPs with
shadow doorbells enabled, so we don't need an additional branch here.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idf65f92deb0c6f93019892ef5a02bc28ba4c0f8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11843
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_pcie_qpair_update_mmio_required() qpair argument is unused.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I0bd6897eb8e6a06f211cc599ab6045409bb43641
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11842
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The current error handling of `spdk_mem_map_notify_walk` has off by 2
issue. This issue can split one memory region to multiple smaller
regions when calling the callback to unregister the memory region.
Also, in case of failure, the 1 GB maps of the map failed to be freed.
RDMA doesn't support this behavior and support calling the callback only
once for each previously registered memory region.
Signed-off-by: Aviv Ben-David <aviv.bendavid@vastdata.com>
Change-Id: I65b667f2e84533f234a2e330b20e9ad9eef32854
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11219
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
That is a preparation for adding memory domains
pull/push functionality which works with iovec
structure instead of pointers
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I3d0db3e7b302b45b4e3bae3452bc5ffa3e62db8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11687
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
At this time only rte_vhost_user makes use of the virtio related
functionality. Which is used by vhost_scsi and will be used by
vhost_user_blk virtio transport.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia159e14ce5f9a74185da9898713deeff76d14f1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11100
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If 0 - UINT32_MAX or UINT32_MAX - 0 is substituted into a int variable,
we cannot get any expected result.
Fix the bug and add unit test case to verify the fix.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iad2ea681ad8ad234e70c7310b58785a999612156
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
The spdk_msg_mempool structure has a fixed size, which is not flexible
enough. The size of the memory allocation can now be changed in the
options given to the spdk_app_start function.
Signed-off-by: Alexis Lescouet <alexis.lescouet@nutanix.com>
Change-Id: I1d6524ab8cf23f69f553aedb0f5b0cdc9dde374b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11635
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Enable runtime scheduler changing in SPDK.
Currently we do not allow to switch between different
schedulers after "framework_start_init" rpc is called.
This is cumbersome, because user has to reinitialize
SPDK each time they want to make changes.
Change-Id: I97d723c6ba966d25e8e57ed023fc1d0826e1b402
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11404
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To speed up qpair lookup, an idea to use the DPDK hash library was
proposed. But we have some concerns for the idea, we may see performance
regression for small configuration, lib/nvmf is depending on the DPDK
feature, and so on.
On the other hand, RB tree is simple to use and is not likely to have
negative side effect.
To use RB tree easily, cache QP num into struct spdk_nvmf_rdma_qpair.
Change-Id: Id4ea4e75692f86335b3e984c3fc128e187f22c72
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11798
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
nvmf_rdma_poll_group_add() added a rqpair to the poll_group->qpairs list
before its initialization.
If we change the poll_group->qpairs list from linked list to RB tree,
the qpair can be added to the poll_group_qpairs list only after its
initialization completes because QP number is necessary.
As a preparation, change nvmf_rdma_poll_group_add() to add a rqpair to
the poll_group->qpairs list after its initialization succeeds.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I42525f68c5efbd445f96da8f4f63d31f06f739e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11800
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When vfu_run_ctx() returns EBUSY, due to an ongoing quiesce, we did no
work, so should return SPDK_POLLER_IDLE.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I5953ab652f0adf22df81c94c4bece507833cece4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11810
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will use nvmf library CSTS.CFS instead so that the client can
get this error status.
Change-Id: I42c248a7333d1f9c940bb29135c887a61c906bd4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11676
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
No logic code changes, we will define a nvmf controller migration
data structure in public header file, this is a preparation patch.
Change-Id: I0a98581b320ac9b12b7e4bf838222c5075168e64
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11493
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Plumbing for flags was added in prior pathces. This patch
introduces and respects the relevant flags for use with PMEM
aka durable memory through the accel_fw, IDXD, IOAT and SW
modules.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I792f31459e061d220965feced60e0c236d819a68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9455
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is just plumbing the flags param. Use of it for PMEM
will come in upcoming patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I620df072aaad3f8062a0312bbea3da1bc3f911b9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A new public flag, SPDK_IDXD_FLAG_NONTEMPORAL, is introduced
that hints to DSA that it should bypass CPU cache. An example
use case of this would be where the target is PMEM. This flag
is not set by the low level library (so default is that CPU
cache is the target).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I99fc62d6bfd6ec97985a86fc1ae5454a21679684
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously required flags were hardcoded in the low level library.
By having the user pass them in there is more flexbility and control.
This was driven by the need to add a new flag for pmem durability,
coming in a future patch in this series.
There is no change in functionality with this patch, just movement
of where flags are set and by whom and the plumbing of 'flags'..
Also note that some flags in scenarios that we know are required are
still set by the library.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I194278f9e3cec0886628585cf84bcc2eae635e0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Added build system logic for checking mlx5 crypto PMD support. Added
required libs in make files.
- Changes in mlx5 reduce build system logic since both crypto and reduce
use common libs and libmlx5 related checks.
- Both mlx5 crypto and reduce require -libverbs.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ice1b88fe74bb04bf715ecaac70c4a8d4f3b5d782
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11620
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 3bacd6653d.
Change-Id: I8dbaffc9f50cf9627720667644496cdaf4e81c3f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11723
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Prior to this patch bs_user_op_abort() always
returned EIO back to the bdev layer.
This is not sufficient for ENOMEM cases where
the I/O should be resubmitted by the bdev layer.
ENOMEM for bs_sequence_start() in bs_allocate_and_copy_cluster()
specifically addresses issue #2306.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Icfb0ce9ca20e1c4dd1668ba77d121f7091acb044
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11764
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When using --with-dpdk=dpdk/install option, we need to check if the
librte_compress_isal was built in DPDK before adding it to the list
of libs. rte_compress_isal is not built by DPDK if libisal is not
installed in the system.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iceb4ebb8cee81aa4254e0a878653c8a8dd50cac6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11618
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- In case that --with-dpdk=dpdk/install option is used, we need to link
with the proper IPSec_mb libs the DPDK was built with rather than using
the default location of IPSec_mb submodule located inside the SPDK dir.
- Check with pkg-config if we need to link with IPSec_mb. Find the proper
IPSec_mb library path for DPDK specified with --with-dpdk=dpdk/install
option.
- Use the same behavior for plain --with-dpdk.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Iea56d20d20556d63cb7ffb5ce2ca78f2244796e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11617
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- DPDK may or may not decide to use libbsd. SPDK needs to find this out
and add -lbsd to the list of libraries to prevent linking issues in
case that --with-dpdk=dpdk/install option is used.
- Use pkg-config for proper detection if the libbsd is in use.
Signed-off-by: Yuriy Umanets <yumanets@nvidia.com>
Change-Id: Ie3de0363fefb9b7337394b00adc862839834f164
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11616
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- Reduce the size of initial memory needed by OCF.
Number of allocator buffers equal to 16383 is tested to work
on 24 caches running IO of io_size=512 and io_depth=512, which
should be more than enough for any real life scenario.
This reduces initial OCF memory usage from 726 MiB to 392 MiB.
- Fix string handling for the name of the mempool.
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: I40063ab1897c479c25904ae4096c5dae3351f73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To fully support interrupt mode for the vfio-user transport, we need to
arrange to wake up in one of two conditions:
- we receive a vfio-user message on the socket
- a client writes to one of our BARs
In response, we can process any pending vfio-user messages, as well as
poll the actual queue pairs.
As there is no way for a client-mapped BAR write to cause us to wake up,
interrupt mode can only work when mappable BAR0 is disabled. In that
case, each BAR write becomes a vfio-user message, and can thus be
handled by registering the libvfio-user socket fd with SPDK.
For the poll group poller, we enable interrupt mode for it during the
vfio-user ->poll_group_create() callback; this only works in the case
that no other transports without interrupt mode support are sharing that
poll group.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ic784d01078b2006edb27892fc0613f934eca930b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Keep track of g_vhost_user_init_thread, local to the
rte_vhost_user.c.
There is no need to track this in generic vhost layer.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1fd22e196a3091284f5f9c3c0c7c70a0e18514cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11075
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remaining functions that manage or interact with vsessions
are now placed in rte_vhost_user.
Renamed the functions appropriately with vhost_user_* prefix.
While here g_dpdk_sem was made static, since rest of references
from vhost.c was removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie9fbf5f08910c136711fb1dfab1b35a5488f0c25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11025
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This functionality is specific for rte_vhost,
so move it to appropriate file.
Renamed to include vhost_user_* prefix.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9630902f52d4944d0d18a39dfbff05945ce2bdba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11024
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Functions defined by set of callbacks in vhost_device_ops,
are going to be only used by rte_vhost.
This patch moves those functions into the file, removing them
from vhost.c
g_vhost_user_dev_dirname and _stop_session() are no longer
referenced from vhost.c, so can be removed from vhost_internal.h.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I233206fae3ad5b4549172ac4bd2b036df9ac548b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11023
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Note that this also works around a false positive in
gcc-11 of type -Wstringop-overread.
Fixes issue #2391.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib5301b9ef9fa3ead2a1a2318655533a8cfba03fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11709
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When generating the discovery log page, add entries for
the discovery subsystem, skipping the listener associated
with the command generating the log page.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a14a7d5cdce483f8f3c2eff1b4ededd40bc029
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11542
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we accept connections to the discovery
subsystem on any listener that has been added to
any subsystem (not just the discovery subsystem).
This is not proper behavior, especially for TCP. TCP
defines port 8009 (not 4420) as the discovery port,
so the current behavior means that if NVM subsystems
are listening on port 4420, then the discovery
subsystem by default is listening there too.
For now, continue to allow connections, but print
a warning message when someone connects to the
discovery subsystem on a listener trid that wasn't
previously added.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I734bc49d1a21b2edfb675aef4b8551e2d0ccd4d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11539
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
According to NVMe over Fabrics spec number of SGLs supported by the
controller is reported in MSDBD. But it is also implicitly limited by
command capsule size (IOCCSZ) since SGL are passed in capsule.
This patch adjusts max_sges to capsule size if required. Adjustment to
MSDBD is also moved to transport layer because it is fabrics specific
parameter and is not valid for PCIe transport.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I44918eb949345c61242ca50a524d21d04b6ac058
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11669
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This confirms that the error path can return more efficient
without memcpy such as xattr->name.
Signed-off-by: Dong Yi <dongx.yi@intel.com>
Change-Id: Ic2ed28121ed76eda9d7b24ed6c4c95b0588817de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
One simple fix for nvmf_vfio_user_qpair_abort_request().
Current implementation mixed up request of abort cmd and the request
to abort, which cause problems.
Signed-off-by: Rui Chang <rui.chang@arm.com>
Change-Id: Ia0db9aa738e372789fc502ef877fd1c841c0a2e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11711
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The patch
nvme: Set dnr to zero for nvme_qpair_abort_reqs()
1b3172f726
did the change stated in the title.
However,
Revert "nvme/rdma: Correct qpair disconnect process"
c8f986c7ee
destroyed it for RDMA transport.
Additionally, we had still set DNR to 1 in nvme_qpair_init().
This patch fixes both.
Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Iee60ac24aa7e04cce0f394014c9d9afc9d2b56ec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11644
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When function returned from the error handling the mempool on
'sess' was not released which lead to a memory leak.
Fixes issue #2393.
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Change-Id: Ida3651e9369fb5c4948969480d398a723b2cb6a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11714
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
We do the null check for 'fc_req', but already dereferenced it
before the check. Swap their position to avoid null dereference.
Fixes issue #2395.
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Change-Id: I33b9e6b51b54f6ada9c072cf7ab0acda2622472f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11721
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
A common pattern is:
if (foo->thread == spdk_get_thread())
cb(arg);
else
spdk_thread_send_msg(foo->thread, cb, arg);
for cases where it's important the callback runs on a particular thread,
but it doesn't matter if it's synchronous or asynchronous.
Add a new API to support this pattern, and convert over the current
instances.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Idfbf77c02c9321c52e07181ffd8b0c437e1ab335
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
We can ask libvfio-user for the listening socket fd, and register that
for SPDK interrupt handling.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I8d0ba7a86403f2d0170b9359480f1fefc1036557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
