For bdevs that don't support zero copy, emulate the
API using regular read and write operations.
Change-Id: Iabd7ff474bf740b096f38bd47196987cbd89e915
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/416465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a ZCOPY operation to obtain buffers that represent
data regions on the backing block device.
Change-Id: Ie941c16ee051d0009e3888b52b8f41773bba47b3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/386166
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Bdev descriptors could be closed only from the same thread
that opened them. This restriction was suddenly introduced
at one point without making sure all the SPDK code respects
it. Vhost can still close descriptors from any arbitrary
thread and fixing that would require some more effort.
With this patch we remove the thread-specific assert from
spdk_bdev_close() and hence allow vhost to work properly
in debug builds. Vhost can still have a possible data
race with bdev hotremove notification, but let's get rid
of the abort() from the usual code path first.
Change-Id: I6fac66a5ebc907b1c5418fff618f0b64cd9b69f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to wait only for those descriptors which
specified the hotremove notification callback. The
bdev could've been removed before the descriptor
was closed and the subsequent spdk_bdev_close would
simply segfault.
This patch modifies spdk_bdev_unregister to always
wait for all descriptors to be closed before actually
unregistering the bdev. This consolidates the bdev
unregister behavior for descriptors with and without
the hotremove callback.
Change-Id: I9b358209c6abd301b6fe8660e27bc6fa4ef485d6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the use of spdk_uuid_compare() to be consistent in the file,
also change the SPDK_INFOLOG to SPDK_DEBUGLOG to avoid the
repeated log messages for RESERVATION CONFLICT response.
Change-Id: I72fefbd520cefcaf25182c3ca3d21e3d87d17e94
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now Host can get an asynchronous event notification when
registrants were unregistered/preempted or reservation was
released from the associate namespace, Host can send
get log page to clear related log pages and reservation
report to get the full overview of current reservation
configuration.
Change-Id: Idc57c19812490c7536503308989871515e9f2361
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The mode of dmb oshld can guarantees cpu sequential execution,
which has less impact on performance.
Change-Id: If30b6a682a2216eecd1da039267ed4f5471afc38
Signed-off-by: h00448672 <heyang18@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, when creating a snapshot in blobstore the snapshot's cluster map
was copied from the "original" blob, with the original's map zeroed. These
operations are both O(num_clusters*cluster_size/page_size) while io
operations are frozen. This change replaces the linear operation with an
O(1) pointer swap at the critical moment that io is frozen, while
doing the zeroing before the freeze when preparing the snapshot to
minimize freeze time.
Change-Id: I1e468bc97623f5da161a8ddba1393c271acd3aed
Signed-off-by: Amir More <habeanf@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451486
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is the end of the patch series. After this patch,
delete_target_node RPC will wait for the completion of
removal of the SCSI device and then free the iSCSI target.
SCSI device holds passed callback and calls it in free_dev().
free_dev() is ensured to be called after all iSCSI sessions
are closed. So iSCSI target resource can be freed safely
after that.
Change-Id: I25921b4014207092b7b3845dfeae58bcdffa2edc
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450607
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_malloc() is not required here, as the device
object is neither DMA-able nor shared between processes.
The device structures used to be aligned to cache line
size, but that's just a leftover from before sessions
were introduced. The device object is just a generic
device information that can be accessed from any thread
holding the proper mutex. The hot data used in the I/O
path sits in the session structure, which is now allocated
with posix_memalloc() to ensure proper alignment.
Vhost NVMe is an exception, as the device struct is used
as hot I/O data for the one and only session it supports,
so it's also allocated with posix_memalloc().
While here, also allocate various vhost buffers using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic7f63185639b7b98dc1ef756166c826a0af87b44
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450551
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
They used to be allocated with spdk_dma_zmalloc() which did
provide zeroed memory, but we unintentionally changed that
when switching to posix_memalign.
The structure might have some unitialized memory, so with
this patch we just memset it right after allocating it.
Change-Id: Id5a5685e09419901513925abaeed605c36f5199a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
blob_delete_cb() takes spdk_fs_request as the input
parameter.
Change-Id: Ie6150e7d31d187296a448e82784e2ac2fecfe52c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
fs_truncate_complete_cb() takes spdk_fs_request as
the input parameter.
Change-Id: I0413fecd30a1f7cb6528b502848fa999454ba638
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For existing filesystem APIs, SPDK can only support
1 data buffer, we add the iovec data structure here
so that it can support multiple buffer vectors in
following patches.
Change-Id: I26984f3ea985f349a5016060e0801e3989ce2fc6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450722
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We did this a while ago for login notifications - do
it for logout as well.
While here, just use SPDK_DEBUGLOG instead of printing
to a buffer first.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I77f566d139cd818428371ec887efeca6eee08898
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451062
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The next patch will add the function ponter typedef
spdk_scsi_dev_destruct_cb for SCSI device destruction.
Hence add lun to the names of descriptors and callback for SCSI
LUN for clarification.
This patch doesn't change any behavior.
Change-Id: I73f2bce9129f7a6f16770ab6ed18428b16589108
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch changes iscsi_tgt_node_destruct to be asynchronous.
spdk_iscsi_shutdown_tgt_node_by_name() uses the callback
provided by iscsi_tgt_node_destruct(), but
spdk_iscsi_shutdown_tgt_nodes() doesn't use it.
The reason is that during shutdown all sessions are terminated
already, and spdk_iscsi_shutdown_tgt_nodes() doesn't need to
wait for the completion of iscsi_tgt_node_destruct() by using
the callback. iscsi_tgt_node_destruct() will complete immediately
in this case.
spdk_scsi_dev_destruct() is not asynchronized yet and so
iscsi_tgt_node_destruct() calls its callback directly in this patch.
The next patch will replace the call.
Change-Id: I86911c5297a93560551e0404d6ea85f49d647c22
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch changes spdk_rpc_delete_target_node() to pass
rpc_delete_target_node_done() and its context to
spdk_iscsi_shutdown_tgt_node_by_name().
iscsi_tgt_node_destruct() is not asynchronized yet and so
spdk_iscsi_shutdown_tgt_node_by_name() calls the callback
passed from the caller directly for now.
The next patch will replace the call.
Change-Id: Ide2d9fcc6738e02de19f91249c21ac2d0d37138a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450605
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
delete_target_node RPC had not waited for completion of
spdk_iscsi_shutdown_tgt_node_by_name. This implementation
is not the direct cause of the deadlock issue in
spdk_iscsi_conn_stop() but changing delete_target_node RPC
to wait for completion of spdk_iscsi_shutdown_tgt_node_by_name
will prevent future errors.
spdk_iscsi_shutdown_tgt_node_by_name() is not asynchronized yet
and so rpc_delete_target_node calls rpc_delete_target_node_done
directly in this patch.
The next patch will replace the call.
Change-Id: I6a042028b93c36ca9f68e3b212141e101b33d394
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When any iSCSI target is destructed, if the target exits all corresponding
connections first, destructing SCSI device will be easier.
Hence, iscsi_tgt_node_destruct() starts exiting all corresponding
connections. Then it destructs SCSI device immediately if no active
active connections, or waits for the completion if there is any
active connection for the target.
Change-Id: Ibd4a29789faecfefccefa1153a519c43d040a00d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450737
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In iscsi_conns_cleanup(), g_conns_array was unmapped but was not
invalidated by setting MAP_FAILED.
So, find_iscsi_connection_by_id() caused segmentation fault if
it is called after iscsi_conns_cleanup().
Change-Id: Ib91c9240c62c2aaa32713dd4aa382d31e5ea2eed
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In case of a DSM Deallocate (unmap) with multiple ranges, individual
bdev IOs are submitted for each range. If the bdev IO cannot be
allocated, the request is queued on io_wait_queue; however previously
submitted ranges may complete before memory is available for the next
range. In such a case, the completion callback will free unmap_ctx,
while the request is still queued for memory - causing a segfault
when the request is dequeued. To fix, introduce a new field tracking
the unmap ranges, and make sure the count is nonzero when the request
is queued for memory.
Signed-off-by: Yair Elharrar <yair@excelero.com>
Change-Id: Ifcac018f14af5ca408c7793ca9543c1e2d63b777
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447542
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The previous patches described as optimizations also
fixed some issues. They seem sufficient to cover all
the error cases, but the real source of the problem
lies in foreach_session() initiated by the device backend,
which can use sessions that were never seen by the
backend.
The backends are only notified when a session is
*started*, but foreach_session() iterates through
all the sessions - even those that were never started.
Vhost SCSI, for example, in the foreach_session() callbacks
used to expect svsession->svdev to be always set, but
that field is only set when the session gets started.
A perfect solution would to introduce a new backend
callback to be called on new connection. Vhost SCSI
could set e.g. svsession->svdev inside. For now we go
with much easier solution that prevents sessions from
being used in foreach-session() unless they were
started at least once. (...and e.g. got their ->svdev set)
Change-Id: Ida30a1f27f99977360d08a71a64fc92931b25b75
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449394
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Before SCSI target is removed, all vhost sessions need
to drain their pending I/O and put their I/O channels.
After a session puts it channel, it sends an async
notification to the entire vhost device. The device
will check if there are any other sessions still
referencing the SCSI target and if not - it will
continue removing the spdk_scsi_dev object. There may
be multiple sessions sending those async events at the
same time, and while we do protect from removing the
same spdk_scsi_dev twice, we can still remove
a different spdk_scsi_dev that was hot-attached in the
meantime with the same target ID.
1. SCSI target hotremove (e.g. via RPC or bdev hotremove)
/ \
/ \
session A session B
drain I/O drain I/O
| |
v |
done v
send event done
\ send event*
\
All sessions have detached the SCSI target, remove
it from the entire vhost device. From this point
a new target can be hot-attached (e.g. via RPC).
2. Attach a SCSI target with with same target ID.
3. Hotremove event* from the previous SCSI target gets
finally executed. SCSI target with that ID is
occupied (again) and may be hotremoved by mistake.
The role of that hotremove event is just to kick the
vhost device and make it remove any scsi targets that
can be removed, so add a check preventing it from
removing devices in states other than REMOVING.
Change-Id: Ia1cc7cae797fd8859d485e63f0ef37aeac2945d0
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449990
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Always unset the VHOST_SCSI_DEV_REMOVED status on
session stop, so that we won't send hotremove SCSI
sense codes after e.g. a VM gets rebooted. The VM
should generally enumerate the SCSI devices again
in such case. We already unset the REMOVED status
for devices which were still attached at the time
of the session stop, but the devices hotremoved
before the session stop retained their REMOVED
status, giving us inconsistent behavior.
Change-Id: I7c5876e29f4bdc99cc060f1d891e24ac57051f37
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449709
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Vhost sessions currently inherit the SCSI target
status from their vhost devices when started. So
if a session is started while an asynchronous SCSI
target hotplug is in progress, the newly started
session will inherit the VHOST_SCSI_DEV_ADDING
state, which was not meant to be used in sessions
and will likely cause vhost to misbehave. The
ADDING status is used by the entire vhost device
to indicate that some sessions are still hotplugging
the SCSI target and that target can't be hotremoved
just yet. The sessions set their targets' state to
PRESENT when hotplugging them, so newly started
sessions should do the same.
This patch also prevents the same SCSI target to be
hotplugged twice to a single session. It wouldn't
cause any problems, but some resources could've been
leaked.
Change-Id: Icdbff78c167fc1f2f65137087334bd5512e81546
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This an optimization that slightly simplifies the
SCSI target management. Currently if a session is
started while an asynchronous SCSI target hotremove
request is pending, the newly started session will
inherit the target in the REMOVING state. It will be
probably removed from that session in the next
management poller tick, but all that complication
is completely unnecessary. The session shouldn't
have picked up the removed SCSI target when started.
It could have simply checked that the target is
being removed and could have ignored it. That's what
this patch does.
Since the hotremove event used the active session
counter to determine if the removal was additionally
deferred, it had to be refactored to use a separate
per-request context, as there's no longer a direct
relation between started sessions and sessions that
still need to remove the target.
Change-Id: Ib78765290fa337a7d0614e5efc271760e81e4e63
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Here assert(nvme_bdev->id == nsid) ,there's inactive case about nvme_bdev,
that code will continue. So need to skip the same case in remove_cb.
Change-Id: Idd3bd16d32e75f6d0e448b838676eb6f2ca5cfad
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451445
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were incrementing over the end of the descriptor list and assigning
undefined values to the rsp opcode in SEND_WITH_INVAL case. We were only
hitting this error when mixing sgl and inline requests in the same
workload. We were just by chance hitting a four bit value that was set
to all 1s from the in capsule data from the last request.
Change-Id: Ied06356f3d22fa34a2cd869dfad6bdca8720791d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The upper levels of the stack allow for this, so we should follow that
pattern so I/O don't break here.
Change-Id: Ia862f14975a551b0675bafd7709fb7897d0d567e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The while loop in this function was structured such that if the final
child request did not contain a full number of SGE elements, it would be
truncated. We need to not only check whether we have a full number of
SGEs, but also if the current child has consumed the end of the parent
request.
Change-Id: I7df6c224e9ab66033c92d2cf1af10452f5cdfd9b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
While detaching the device, DPDK may try to unregister
a VFIO interrupt callback which is currently "in use".
The unregister call may fail, but the error doesn't get
propagated to upper DPDK layers. Practically, detaching
the device may stop in the middle but still return 0 to
SPDK.
This effectively breaks hotremove as the device would
be neither usable or removable.
We work around it in SPDK by internally scheduling the
DPDK device detach on the DPDK interrupt thread. This
prevents any other interrupt callback to be "in use"
while the device is detached.
Since device detach in SPDK can be asynchronous now,
we add a few checks to prevent re-attaching devices
that are still being detached.
Change-Id: Ibb56a8017e34418db0304fe32774811427b056aa
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an attempt to fix device hotremove with VFIO.
A soft device hotremove request through sysfs [1] would
currently just block until the SPDK process manually
releases that device - e.g. upon an RPC request.
VFIO won't get unbound from the device untill userspace
releases all its resources. VFIO can signal a pending
hotremove request by kicking any file descriptor provided
by the userspace - and DPDK does provide such descriptor -
but SPDK does not listen on it.
DPDK does offer handy API to listen and in this patch
we make use of it inside our env/pci layer. Within
a DPDK callback we set an internal per-device hotremove
flag, which upper-layer SPDK drivers can poll with a new
env API - spdk_pci_device_is_removed().
The VFIO hotremove event will be sent to primary
processes only, so that's where we listen.
We make use of this new API in the NVMe hotplug poller,
which will process it just like any other supported
hotremove event.
Fixes#595Fixes#690
[1] # echo 1 > /sys/bus/pci/devices/<bdf>/remove
Change-Id: I03d88271c2089c740e232056d9340e5a640d442c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reservation notification log page can be returned via the
get log page command with correct page number, users can
get zeored page buffer if the controller didn't have any
reservation notification log.
Change-Id: I99f5e4b8917a6919eb68359628efa1bead4b21b5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
All the reservation commands are processed on subsystem's thread,
however the reservation notice log are controller related, and
the get log page command with reservation page will be processed
on controller's thread, so we use the same thread for generating
the log.
Change-Id: Ie000320d74242b979f6638d703523f063347ec29
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Existing code only update the subsystem's poll group reservation
information when unregistering the key, however, new registrant
and update the key actions also need to be updated.
Change-Id: Ib8db9eb457977757251403edb92eda073b846e59
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now all the spdk_fs_cb_args used in blobfs are in the
spdk_fs_request context, so the field 'from_request' in
spdk_fs_cb_args can be removed.
Change-Id: I9b40cffeac8a673a87406ee89ad248939593806b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Data structure spdk_fs_request has internal spdk_fs_cb_args
for each request, and for some APIs such as truncate they
all use spdk_fs_request as the parameter, so here we also
change flush to use the request parameter too.
Change-Id: Ic70b98cafe53d42c234f74b3703dc7797f210569
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After the write data has been appended to cache buffer, the
allocation of flush request can return error, so we move this
allocation before appending to the cache buffer.
Change-Id: Ia8baae8f3d88596561633bd8a5c4f83e554c72d7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rqpair qp and resources maybe not be created, if rqpair fail to
initialise. For example, in function new_qpair, the code run to
spdk_nvmf_qpair_disconnect, but rqpair is initialised in
poll_group_add.
Fix#557 segmentaion fault(core dump)
Change-Id: I1892e6d13e2d53dd5a7c4856d775f9b3b85da961
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
set_bdev_qos_limit RPCs must come after the RPCs that
create its bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7008745f9c56d9bc579decc7fe3c4d0d58950754
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451414
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This case was zeroing the entire structure - overwriting
the peripheral and page_code data already set. Don't
bother zeroing the alloc_len either - we'll set that
later in this case statement.
Fixes issue #750.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b7c6f954b5e3c85ddfaf801d64dd4a501f50cd2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The DMA-able vrings are allocated separately, so
the general virtqueue object can be allocated with
regular malloc - it only contains some local PMD
context.
While here, also allocate those DMA-able vrings using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I06b9e0256c14c21747c253f05b63ef2361f465c7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If rsp->status.sc != SUCCESS and xfer == DATA_CONTROLLER_TO_HOST,
We would not send the data WR, so clean the num_outstanding_data_wr.
Fix#728
Change-Id: I32259788e495ed76f8f02a9d871bd56356d93dc4
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450726
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A host can use the Asynchronous Event Command to be notified of
the presense of one or more avaiable reservation notification
log pages. A reservation notificaton log page should be created
whenever an unmasked reservation notification occurs.
Change-Id: I8b83e5319725286dd0a5efc1b22d8ac4673e31e1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the flag destructed to struct spdk_iscsi_tgt_node and
iscsi_op_login_check_target() refers it and returns
ISCSI_LOGIN_TARGET_REMOVED if it is true.
When destructing iSCSI target node, it will be nice if iSCSI library
can stop further connections are created but, connections are not
associated with any target node until processing login. Hence stop
creating sessions instead.
Additionally, when destructing iSCSI target node, if the flag destructed
is already set, return immediately, and the flag destructed does not
affect discovery session.
Change-Id: Ic73bdd93f2ca7d5ca1d2f897d5046cbc51650d5f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450881
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These change will be used in the next patch.
Change-Id: Ifdb4ccf20049b46e850122a4021cbbe7441e1270
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will exit only connections belonging to the
specific target node. So add target to get_active_conns() as
an argument.
Change-Id: If0d9cad46614310e0fe17e69e75c1185146730f4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When target is specified, the function starts exiting any
connection that belongs to the target. When target is not
specified, the function starts exiting all connections.
Change-Id: I0dfb56ceac5ee36d10547a9ab9a0f768ca8e02ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the operation to start exiting connections into a
function. This patch doesn't change any behavior.
Change-Id: I8f48961bcc95c480636e0e0d8fbb8ef029818d9e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
target had been set to the created session after returning from
create_iscsi_sess(). But create_iscsi_sess() has been used only in
a place and target has been already included in the arguments in
it. So set target to the created session in create_iscsi_sess().
Change-Id: Id65e6c5a1f76b995a7d0e9939ff3a2fce5daeb3f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
iSCSI mutex had guarded both unregister operation and destruct
operation in a single critical region in spdk_iscsi_shutdown_tgt_nodes
and spdk_iscsi_shutdown_tgt_node_by_name.
Subsequent patches will separate unregister operation and
destruct operation, and so this patch separates critical region of
unregister operation and destruct operation.
Change-Id: I847915f8277c4475c034ca64fd07ccdd47659590
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will make iSCSI target possible to wait for
completion of SCSI device destruction by using callback.
This patch moves spdk_scsi_dev_destruct() before starting to
free iSCSI target node resource as a preparation.
Change-Id: I9cfe7662a05b1211292a5cc448bbba60a929f356
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Nvmecli tool doesn't add parameter check when submitting
to NVMf target, so we add additional check in NVMf target
to prevent such cases.
Change-Id: Ieb2b3b3c22d71913f2743a0f9cdad4aba184c320
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Existing condition for updating subsystem poll group's reservation
information is wrong, when received the RELEASE command, the
reservation type may be changed to none, but it will not be
saved to the subsystem's poll group.
Change-Id: Idc177a0f03fb9611d6eda1e25a5b90caaa73d1be
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450727
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This avoids a data dependent load to find which
callback to call in the completion path.
Change-Id: Ifa20790a7af3332a74bc45037e589668744af797
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The same information can be obtained by checking the req
field for NULL.
Change-Id: I9689ee0be33537fd6d3f35d8c3710fabab5e1928
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450557
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Newly added callback parameters are passed to spdk_bdev_unregister()
in the end. This patch adds just parameters and the next patch will
utilize them.
Change-Id: Ic239c55872c0c69f3d1625eaccdb91a32a9d4d30
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Change-Id: Ib58b7e6d8531c84ab5e4fce7a838e409e77a0de5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450571
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
spdk_io_device_unregister should be called after spdk_bdev_unregister
because IO channel should be terminated after all open descriptors
are closed. This patch follows the practices of other bdev modules.
Change-Id: I6003edf0a6f6b2b235bf66f4b81bb0c2b855ae14
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450570
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Move the call raid_bdev_deconfigure() to the end of the function.
This will make us to add the callback to raid_bdev_deconfigure()
and remove_base_devices().
Change-Id: Ic8ce847068f5a3682003707c87c364ed4b68e587
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450569
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
Getting raid bdev from its config and processing base bdevs by using
it throughout is much more natural.
Checking if base bdev is active can be done by checking if the pointer
to the base bdev in base_bdev_info is not NULL.
Change-Id: Idd43b13eb342d9cd21ba55943bdcd1f564b3760e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450568
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a preparation to add completion callback to the
destroy_raid_bdev RPC.
This patch doesn't change any behavior. This patch just factors out
code into a function and move it to raid_bdev.c.
Change-Id: Ia86741ec686ffd85e4d826caf4442292963922ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch tries to clarify the logic of the operation to
deconfigure the corresponding raid bdev when a base bdev
is removed.
Change-Id: Id601049dfa59cd919321d833c2867f40c3ba031b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
raid_bdev_free_base_bdev_resource() has been referenced only in
bdev_raid.c.
Change-Id: I4be9ed5b7a93b950b16e57323cdf1f4bdf89841f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450565
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
raid_bdev_cleanup() has been used only in raid_bdev.c.
Change-Id: I4dcc4979eda2fd872fda23e3433b120ab6aaaad2
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Configuration lists in RAID bdev are unlikely to be exposed outside
of the RAID bdev module. Hence simply the prefix g_ will be enough
to clarify they are global data structure in RAID bdev module.
Change-Id: I9df88db8fa651d5af7d771d88ff04bb5997079c9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When copying the NVMe command from the request to the actual
submission queue slot, use a non-temporal move instruction.
The submission queue slots are never read by software - only
written to. So don't pollute the CPU cache with their contents.
Change-Id: I112f721abfac03bd7b33ec9ddf783d4bf2952b42
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450193
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to ceil the size of the vring structure to the
nearest cache line boundary. That's how the original
DPDK implementation behaved, but I can't find a reason
for this. This patch gets rid of the ceiling.
Change-Id: Iaa40fdb79c60252237901f77023ff2f9e580eece
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_malloc() is not required here, as the device
struct is neither DMA-able nor shared between processes.
While here, also allocate various ioat buffers using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I4ffa40a59f48b2854ba3b35a759e4778007b47b7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450258
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I1ad624aa64c70e6f5716d711bb6d2d6b6cd1007d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450257
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Idb18f7ef44634deaf63139f0f872881c9cdaefac
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_malloc() is not required here, as the bdev
struct is neither DMA-able nor shared between processes.
While here, also allocate mdisk->malloc_buf using
spdk_zmalloc() instead of spdk_dma_zmalloc(), as
spdk_dma_*malloc() is about to be deprecated.
Change-Id: If835216764a565ade09180159fbbc92411b5c78f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Id49d700116bdd977893c6b89470764d97d9293bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a part of future changes to block blob operations
that may cause race conditions between each other.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia728d1fc207375ddcb3b70b5081ddcffa9f99027
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are several places where we have the tracker
pointer, yet we go find the tracker again by getting
the tr->cid and using that index to find the tracker
again in the qpair's array. That's really silly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54acd642a2c9821f2b95e17563904b859495081a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450308
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current the idea is:
Convert the multiple SGL into the single SGL and send it
out.
Change-Id: I8e571704e9d7c7b583f889837eead7cac1982fcd
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
First submission. Implemented part of the Opal library
and "scan" function. Can be invoked by nvme_manage.
Change-Id: Iba86d86dd3af06a06b6805120ee5005af8183459
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Limit the thread scheduler to put spdk_threads on
lcores < last_lcore instead of lcores < lcore_count,
which was probably the original intent.
When the cpumask was not a contiguous cpu range, the
thread scheduler failed to schedule any spdk_threads on
the last cores. There was one hardcoded thread created
for each reactor, but the scheduler could squash some
of those into a single reactor. This broke the legacy
lcore-based messages as those expect there to be at least
one spdk_thread per lcore. Any spdk_poller_register()
or spdk_get_io_channel() called from such a legacy
message would fail an assertion, as spdk_get_thread()
returned NULL.
Fixes#743
Change-Id: I81a3f76d9c4788596c697df6ff51b264b99ce10b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's possible that we get a request to abort I/O just after
a queued_datain_task has completed, but before we've had a
chance to remove it from the queued_datain_tasks TAILQ.
_iscsi_conn_abort_queued_datain_task wasn't accounting for
that which would result in an infinite loop.
Fixes issue #725.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Tested-by: Jane Lusby
Change-Id: I494ee78763d527d83dcb65f46563ee69bb975576
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450301
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unregister OCF bdev using poller that checks if
cache has pending requests.
This prevents ocf_mngt_cache_stop causing
deadlock on reads in WT mode.
Submodule commit was updated to get new function ocf_cache_has_pending_requests().
Change-Id: Iee4cb09bc2bb859a6dcce89994c686f64924c942
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add structure vbdev_ocf_mngt_ctx that is going to be used
for asynchronous management operations.
Using such context, dynamic memory allocations are no longer required
(except for one time poller registration)
This patch also adds functions to modify context in a predictable way.
They are very important for complex flow of management operations in OCF bdev
especially after whole OCF API gets changed to asynchronous.
Change-Id: Ia402d51665330a553f7f3d74000e3636f0d6a598
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Should speed up operations, and allows us to remove the 16 byte link
object from the request structure.
Change-Id: Ie62df1f44d22580a7a7ae41c498295841d1e3064
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I683ea366da7bb186f16a8084a9c43276ed4fce04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449798
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To support the multiple SGL later.
Change-Id: I133a451100b736353cf98a6aaca879d290ff5b67
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enhance RPC method start_nbd_disk to take nbd_device as
one optional parameter. If it is not assigned, automaticly
choose an available nbd device path from /dev/nbd0 to
/dev/nbdN.
For github issue #324:
https://github.com/spdk/spdk/issues/324
Change-Id: I72c064d8bd476df342f5aa0af4d6120eb021c7ed
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This API had good intentions, but as more complicated
use cases came up where base bdevs could come and go,
we've realized that the bdev layer will need another
mechanism to query bdev modules on these types of
relationships between a virtual bdev and its base
bdevs. We removed all code related to tracking
the array of base bdevs a long time ago.
Change all existing callers to use spdk_bdev_register.
Document spdk_vbdev_register as deprecated for now,
and change its implementation to just call
spdk_bdev_register for simplicity sake.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3b40ed96480c0fa7184db42953a9f4e4c167fed1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function will be exteneded later for multiple SGL
support.
Change-Id: I1f6962ec03c72e335efaa311a12d3891312fcc53
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
LUN ID is not converted from integer to structure and integer is
set to R2T PDUs.
Popular iSCSI initiators don't check this value and work correctly.
This patch uses the public helper function of the SCSI library
to fix the issue.
Additionally, private helper function to convert structure to
integer for LUN ID is replaced to the public helper function
of the SCSI library.
Change-Id: I9218c5ef7a8bfec43326c6584db7c6929fdd11a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449963
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one enum from this whole struct, so there is no need
to store it. Plus the queries we use to update it are so infrequent and
only occur during connect and disconnect so I think we can save quite a
bit of space by removing this without compromising performance.
Change-Id: Icf29977a3c10cb289564fa2760a0059f07a0f8cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There was a lot of duplicated code here between states. I'm trying to
minimize the duplicated code without making it confusing.
Change-Id: I13183431e554c8a9f501b3385bbd7b59e2c83161
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Catch an edge case where a multi sgl request is longer than the allowed
transfer size.
Change-Id: I79779050fe951d16f1240e2c3d8cf5037e576ea2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is important to avoid thrash when we don't have enough buffers to
satisfy a request.
Change-Id: Id35fd492078b8e628c2118317f674f07e95d4dba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While useful in NVMf target, this is really annoying
in the consolidated spdk target, where NVMe-oF doesn't
even have to be used. OCF tests currently use iscsi_tgt
just because spdk_tgt requires the additional [Transport]
section in the cfg file. Let's remove that requirement.
Change-Id: I418b47d62dcc06b9513f9f0496dc1e39b9d5a554
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450056
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Right now they can only use memory from the socket
that performed iSCSI static initialization, which
doesn't make sense. Those mempools can be used from
a different socket as well, so don't restrict them
to any specific one.
Change-Id: I0def1c554ed6227ab0f0a7be107c4c1c61f40c96
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Relaunch queue poller on put_io_channel callback of OCF bdev
to delay thread shutdown. New poller will finish all pending
OCF requests as there might be some even after all SPDK IOs
completed.
This solves the issue of OCF not being able to
complete all its work because of queue poller getting
unregistered in callback of put_io_channel.
This patch also changes unregister procedure:
we call ocf_cache_stop in callback of io_device_unregister
instead of in callback of bdev_unregister.
Change-Id: Ib7e41fc25e71029a73bb76a62e39e6bf4b8189ce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
vbdev_ocf_delete function accepts callback now.
RPC delete_ocf_bdev is also updated to adopt this change.
Change-Id: I1d357a5e37015268e28c07fd81dc35f48ec80ab8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are really specific to the request and not the wr or data
object. In the case of multiple wr requests, the maximum number of
buffers per req is equal to the number of SGEs in the NVMe-oF request
*2.
Change-Id: Ic59498bfed461d180adb2fb9a481ac5b11fa9252
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable parsing an nvmf request that contains an inline
nvme_sgl_last_segment_descriptor element. This is the next step
towards NVMe-oF SGL support in the NVMe-oF target.
Change-Id: Ia2f1f7054e0de8a9e2bfe4dabe6af4085e3f12c4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/428745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This also means that the RocksDB threads don't need
to be SPDK threads any more.
Change-Id: Icadd6dd446958ebf470ad8ab8239f5390942eb87
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the next step, this won't be a channel at all.
Change-Id: Ia8fe4da5b0b283e8dfc5c6477b84cfdd346d89a0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When we decompress, pass the size of the compressed
data - not the size of the buffer itself.
We also need to remove an assert that's no longer
true since we can now handle compressed chunks.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb7896db12ccbefdd49815b5037af11ddd82e625
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Most typically, the error will be -ENOSPC, meaning the
destination buffer wasn't big enough to hold the compressed
data. But even for other types of errors, just write the
uncompressed data rather than treating it as an I/O
failure.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6526cab95488a1a587b183237f9980c83287761
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test functions to be added later in series
Change-Id: I96286b6214b4577df334d180e7c3d641e8ce8f68
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
My iSCSI target reported segment fault after memory allocation
failure, and add the addtional check here can fix the issue.
Change-Id: Iee3e497d7028fbface6d110c78e73965ef0f178b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449717
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
lvol should not only be freed but also removed
from lvols list when deletion fails.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a047e1cc611e71b1544ca77c256a879dd2efdae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not standard to put a newline here - let's use a null
character instead.
Found while using nvme-cli - when creating a subsystem with
default serial number, the right justified callout text had
an extra newline in it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a81dafb4f6c30f7bf2dcebfa7a5b19cfe3ab5fc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes#726.
This prevents a segmentation fault by checking the pointer
before accessing it.
Change-Id: I18a3776fbcd6242c6efd1b88044debaa88c7342f
Signed-off-by: Claire J. In <claire.in@circuitblvd.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449591
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Misc cleanup from earlier patches, some naming issues and other
minor things that are needed before adding UT.
Change-Id: Ic76f0e2fd12e48782b048fb8785902b1098cf352
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is starting point for metadata refactor
which is needed for efficient ANM events support.
Change-Id: I81d864605e69008d8e3922fb61adf504187447a1
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ib9fb94463a69ffd9660ab2c7fbe02826a7e06741
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When bdev is registered it will send "bdev_register" notification and
"bdev_unregister" when unregister is complete.
Change-Id: I3b37a4cb766a473f3da63a571036add366e78fa5
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448839
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A few private functions had still the prefix spdk_ in their names.
This patch completes the effort to remove the prefix spdk_ from
private functions in iSCSI library.
Change-Id: Ic1a1e85220edb72296ca4881bdf7b550c4f6b6b8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fixes#722. The state was set in nvme_ctrlr_identify_id_desc_async
Signed-off-by: cranechu <cranechu@gmail.com>
Change-Id: I232f0035e8c45d49eca2de7174c91860a299d804
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449527
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replaced tpoint_ids generated based on the properties of the IO with a
static list of tpoint_ids, to fit inside the per-group maximum tpoint
limit (64).
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ifb8b8637a1e6d8f0e7fd3f4363b97fdbedcdb8d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When you connect a iscsi lun as a bdev, and the lun id is not 0,
all IOs will fail.
We should use the correct lun id in libiscsi.
Reproduces like this:
./scripts/rpc.py construct_iscsi_bdev -b iSCSI0 -i
iqn.2016-06.io.spdk:init --url
iscsi://127.0.0.1:3261/iqn.2016-02.com.smartx:system:fl-iscsi/1
Signed-off-by: Li Feng <fengli@smartx.com>
Change-Id: I2480e866fdda17426362aca3cb30b7e90c927547
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449318
Reviewed-by: Kyle Zhang <kyle@smartx.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI library had used the prefix spdk_ for most functions regardless
of private or public. Using the prefix spdk_ only for public functions
will be helpful to distinguish private and public functions, and
will be helpful to investigate issues or do further improvement.
Besides in iscsi.c static variable spdk_arc4random_initialized had
the prefix spdk_, and change it to g_arc4random_initialized according
to the SPDK's good practice.
iSCSI library still have some issues but is more stable than before
and now will be the good time to adjust the naming rule to other
libraries.
This patch doesn't change any behavior.
Change-Id: Ia0b8585a7ce6662cabc0e6f57b7ccb8a40342297
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449396
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
These function declarations are not used.
Change-Id: If525f4157e3fa9e5d718e6c7aa77db8584edd14c
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449395
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds library that will provide ability to notify about
events. On one side each spdk library can specify what kind of
notification it can produce and on the other side libraries can fetch
those notifications.
Example is bdev module, which lib notify about added or removed bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Our blobfs allocates fixed number of reqs on three different channels
(the default size is 512), if the req cannot be allocated, our blobfs
related function will do nothing.
With this debug info added, we can easily know the issues.
If the fixed number of requests are not enough, we need to change the
design, using malloc/free together with the fixed number of requests.
During high presure test, I think that if the reqs are not allocated,
it will cause the sync, flush related issues.
Change-Id: Ied8cd5197c4f87b861bd7dc09edd5a095fdcc802
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is just a cleanup. There's no need to hotplug
or hotremove SCSI targets from stopped sessions, because
those sessions can't access any targets anyway. When
session is started, it already inherits all SCSI targets
from the vhost device. When it's stopped, it releases
resources of all targets. Intermediate changes have
no effect whatsoever, so don't do them.
Change-Id: Ibf283bcf8260e71dec8d9ea39a9461a978031ab3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It is theoretically possible for an asynchronous
hotremove request to be finished before the hotplug
request that was started first. This is obviously
not expected and will most likely result in a resource
leak.
For SCSI target hotplug, we immediately update the
whole vhost device object and then asynchronously
ask each vhost session to poll the changes.
For hotremove, we see the device attached in the
whole vhost device object, so we immediately mark
it as "still being removed" and proceed aynchronously
asking the sessions to hotremove. When session
receives the hotremove event first, it will either
fail an assertion (when debug is on), or do nothing.
The subsequent hotplug event will attach the target
again - and that target won't be ever freed.
Change-Id: I784c979fb47127a4238038ad9fb5ed1cac3ced04
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For session context we need only a few fields from
spdk_scsi_dev_vhost_state structure, so introduce
its stripped variant as a separate structure.
Change-Id: I1be4e77447443d156f86033450892cb7cb464cb9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
