Due to recent refinement of primary/secondary task management,
remove_acked_pdu() cannot use spdk_iscsi_conn_free_pdu(). As done
in iscsi_conn_free_tasks(), we can replace spdk_iscsi_conn_free_pdu()
by spdk_iscsi_task_put() and spdk_put_pdu() and we do that in this
patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9f83569becfc6e9440fb859709f04b6123674f25
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first step in properly reconnecting after a hard power off
event.
Change-Id: I9739bffacd66ec6d9f8f1d376bf42291c84f90f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473061
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This step is going to become more involved, so it's best to keep it in a
separate function entirely.
Change-Id: Iefa9860420edf28e858c4ed8aa932985c686cfd9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473060
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use whatever size the socket layer thinks is best. Before,
we limited the total amount of memory to just 32MB total. Now,
let the socket layer decide. It will likely use up to 2MB per
socket, which results in much better performance.
Change-Id: I9ef7680773b8c78a743fe74d8abb518258e19a0d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also need to update the spdk_nvmf_tcp_poll_group_poll.
Since if the tqpair recv state in wait_for_req,
we may already received the data, and there could be
not epoll event.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9c5a202e47e57aaba63da143f954a20c135a98ae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473626
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We should alert the upper layer when the qpair becomes unusable due to
qpair errors.
Change-Id: Icdee3b55a14441a60111f3bd7a44dceef93bbb09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474095
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The NVMe-oF target requires 128-bit identifiers for reservations,
so the extended report format must be used. If the user issues
a reservation report command without the extended format bit set,
the specification says to fail it with the HOSTID_INCONSISTENT_FORMAT
error code.
Change-Id: I2382af4f69167322d8e2c3f06cf8d9042830a70c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474131
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
One previous patch refined LUN hotplug process and updated the
comment but we still had checked not only outstanding tasks but
also pending tasks to be completed or aborted. But, as written
in the comment, we can wait for only outstanding tasks now.
Management task is the highest priority and is pending only when
there is any outstanding management task, and the completion
callback of management task executes the first pending management
task.
The last patch changed us to abort all pending management tasks
after stopping new submission.
Hence we can do this change not only for IO task but also for
management task.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I66056f2a02af05d5bccaf6462c6f48c608cd0ca3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474032
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI management task is for SCSI tasks which is submitted after it,
and all such SCSI tasks are aborted by the last patch when we
remove LUN dynamically. Hence we can abort all SCSI management tasks
being queued when removing LUN.
Add simple unit tests too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9be3f910ab4bbb99cd399f71dc716a7c40f34fe5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously iSCSI LUN hotplug had critical bugs and we had no choice but
accept submitting new tasks as late as possible. We fixed the bug now and
we can stop submitting new task immediately after starting LUN removal
process.
By this change, no task is submitted to the LUN and previously queued
tasks have no chance to be kicked. Hence we execute them instead after
stopping new task submission.
This change simplifies LUN hotplug process and reproduce LUN hotplug
issues solidly if we don't have the fix.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a33e6a217978b0863d15aaff3d35880dbdccfd4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to the next patch. If connections detect that
LUN is removed, we have no way to spdk_scsi_lun_execute_tasks()
to the pending tasks. Hence the next patch will call the new
function scsi_lun_execute_tasks() in that case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifdf630bd349c7d2099a6a14accc52f77c129f641
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473610
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We didn't have any check if ref count of SCSI task doesn't go negative.
This addition will verify the idea to LUN hotplug issue by subsequent
patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1d6ca9b9439bc7c4b701b65cc004cdf5cae16e91
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473585
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For large split write I/O, spdk_iscsi_task_cpl() does the same
operations for the error case as the normal path. Hence remove
duplicated operation in spdk_iscsi_conn_free_pdu(). This fixes
the issue that the reference count of the primary write task
goes negative.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I169d8932821f2a1c8e1f153347cd3175f1291bf1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For large split read I/O, the primary task have to be freed by the
last subtask. However, if LUN is removed in the middle of the split
read I/O sequence, the primary task is freed by the not last
subtask. This had caused critical system failure by LUN hotplug.
This patch fixes that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78acaf054360254dffbdc282c2d0d8bb5868e5d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473783
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In spdk_iscsi_conn_handle_queued_datain_tasks(), we had overwritten
task->scsi.lun. However, if the primary task is already submitted,
it cannot process IO completion correctly because task->scsi.lun is
NULL. This patch fixes the issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia63f4c2e37b43477eaccbfd6dfea28fa357bde12
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
In emulated zero copy mode on devices with separate metadata support
the start zero copy request could assert after read completion,
during _bdev_io_unset_bounce_buf; the original iovs would be NULL, but
original md_buf would have garbage data.
Signed-off-by: Kozlowski Mateusz <mateusz.kozlowski@intel.com>
Change-Id: Ia52b012c1b7462ebe490c29f5493168775646848
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473455
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Function vhost_put_poll_group is already removed. There
is no implementation for vhost_put_poll_group, so delete
its declaration.
Change-Id: Ib4766fca93329c4f4faab48857d1ac2eaa268300
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data segment length of the PDU is already cached in pdu->data_segment_len.
Hence additional caching to the local variable data_len is not necessary.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1e596999640229b1b0fa85cbdb342b1636af5076
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Based on the following description in Chapter 4.3 "iSCSI Session Types in
iSCSI specification
b) Discovery session - a session only opened for target discovery.
The target MUST ONLY accept Text Requests with the SendTargets
key and a Logout Request with reason "close the session". All
other requests MUST be rejected.
update the comment slightly, add macro constants for iSCSI logout
reason, and change the ordering of checks to be session type and then
logout reason.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc2ecc5b6dde546700662d3cda59d8cc465fd83a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
conn->sess->session_type must be accessed when conn->sess is not NULL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3d41443352b65ee5ef4cc1f0d152b9e3221975c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
_iscsi_conn_free() is simple enough to embed it into the caller
and remove it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I22bcbbdab15eca647914715754c04b8ec14ad9b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: To remove the duplicated code.
Change-Id: Iab9989f9928698967533e45e7cffad4f09bde16a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: But if we use asynchronous writev
for pdu sending, the call_back of writev may occur
after the new data coming. So it means that the
free tcp request may not be available.
So we use the strategy to check the request status
in TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST.
So the strategy is checking the state_cntr of all the
reqs in TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST
state.
1 If the state_cntr > 0, we should queue
the new request.
2 If the statec_cntr == 0, it means that
there is no available slot for the new tcp request
, i.e., the new nvme command comming from the initiator.
If we receive this, it means that the initiator sends more
requests，and we should reject it.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifbeb510e669082cb7b80faf2e7987075af31d176
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472912
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
To avoid the allocation of ttransport in the sub functions,
and it makes the code much efficient.
Change-Id: Ie4c5a1755ddbecf10dc364ff811f74a7af5f9c3b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473003
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In release builds, the assert() is compiled out, making
it look like the rc value is never referenced after it's
set.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I59305b0e928f2044146e30b7addc86f81e7a1d3f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473472
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we use async writev (e.g., lib io_uring), we find that
the callback of writev is executed after recving the new
data from the initiator, and this is possible.
For example, if the NVMe-oF TCP target receives the ic_req from the
initiator, and sendout the ic_resp, the state of tqpair will change from
invalid to running until the callback is executed. And the data of ic_resp
is already sent to the initiator, and we receive the new command later. However,
we may still not get the call back function executed
(i.e, spdk_nvmf_tcp_send_icresp_complete). And it is possible
for using lib io_uring, I faced this issue when using lib uring.
And this patch can fix this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7f4332522866d475e106ac6d36a8ec715133f0dc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472770
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Since g_fs_cache_size only takes effect when creating
g_cache_pool, so spdk_fs_set_cache_size is only
permitted when cache pool is already freed or hasn't
been initialized.
Add a return value to indicate the result
of spdk_fs_set_cache_size.
Change-Id: I3828b136976d6f03f0751b2f20f68cd47c36ec04
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471869
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we have a mix of -1 and -EINVAL which
is confusing, especially since these types of failures
also result in the caller's callback routine getting
invoked.
While here, document this new -EFAULT return code for
all of the functions that could return it.
Fixes issue #797.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8dfbba0ec0b83db0f2ec055b15830981af1965df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473054
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The last lcore_offsets value already marks the total
size of the histories file - we don't need to also
add sizeof(struct spdk_trace_flags).
Note that this only affected the amount of memory that
was mmap'ed. It did not result in any observable
failure.
Fixes issue #997.
Reported-by: tinnfu (GitHub submitter)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I70fef16241cf00228bc515678cca1721f440c925
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473049
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: tinnfu <tinnfu@gmail.com>
This at least allows the caller to know there was a
problem, and that the messages wasn't actually sent.
SPDK by default creates huge rings so this problem
should never occur, but out-of-tree use cases may
send messages much more often and require at least
a notification when it fails.
While here, change the thread check to an assert.
There's no need to work around someone calling
this function with a null thread parameter.
Fixes issue #811.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie6d432d616be45c7a4232aff1548cef198702bc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This returns true if all registered methods and aliases
are correct. False means that an error like one of the
following occurred:
- duplicate method with same name
- alias specified for non-existant method
- alias specified for another alias
Also plumb this so that incorrect RPCs cause an SPDK
application to exit.
Note: there are cases where this would have been helpful
during the recent RPC renaming.
Fixes issue #940.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I235a433c9b8c01e82f16288a8d295e96c54e4eb1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also cleanup some codes.
Change-Id: I45ff18cd2afcf38c50b073e80448ba5e267e3ef7
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472664
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
After I review the function iscsi_conn_flush_pdus_internal,
I think that it may cause recursive function call issue. One of
the recursive calls in iscsi_conn_flush_pdus_internal
is:
spdk_iscsi_conn_free_pdu
spdk_iscsi_conn_handle_queued_datain_tasks
...
spdk_iscsi_task_cpl(&task->scsi);
...
process_read_task_completion
spdk_iscsi_task_response
iscsi_transfer_in
iscsi_send_datain
spdk_iscsi_conn_write_pdu
iscsi_conn_flush_pdus
iscsi_conn_flush_pdus_internal
So we have to create another list to solve this recursive issue
in the while loop. And we face the the similar issue in
NVMe/TCP before. With this patch, we can fix issues caused by
recursive calls.
Fixes #issue 1023
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7150b962bfb30e74f53ba1a2a826fb78c73d8ea6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472999
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds support for hotplug / hotremove detection for devices
behind the VMD. The detection acts similarly to the one implemented for
regular PCIe devices, that is user has to periodically call probe
function. Additionally, for applications not using SPDK's event
framework, spdk_vmd_hotplug_monitor has to be called periodically as
well.
Change-Id: I9f6839560efcf16c839b01976639d835f119cb47
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The loop is intended to accept multiple socks when
available, but once accept returns NULL, there's no
reason to keep trying.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I896908d276da35bc3fff172c1c17e22abd2a5343
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473234
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All connections to a single LUN run on a single thread but
this thread may not be the same as the one which opened the backed
bdev. So hold pointer to the thread which opened the backed bdev
to struct spdk_scsi_lun and use it when calling spdk_bdev_close().
All resource of LUN are accessed on a single thread after getting
I/O channel, and so lock is not still necessary.
Fixes issue #1024.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc1e238d333afcde0cdf9e9b4af3b56ef65a4f7d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473002
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
It's important to be able to recover full context from just
the PDU in the future.
Change-Id: I3d1f3c326299b1237b42dbe33d340a282c3bc5bb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470531
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This is always the request pointer, so rename it for clarity.
Change-Id: Ifbda7db7787c65f0deb190a1e94f0676b2c0d99a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470530
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Use whatever size the socket layer thinks is best. In practice,
this is the same size as before.
Change-Id: I4820e16d8da6e566d1f8f078a75d345399f64ab5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
These will be used from the posix sock layer.
Change-Id: I6427d9e9aee889e11ba7e36876112a5aba449e31
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471751
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of manually implementing lists/queues, use the API provided by
sys/queue.h.
Change-Id: I06b9f5df2312ed0b6c1e35ecf857eabe5ba107c3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously iSCSI task was created after allocating data buffer
and reading all data, and hence creating iSCSI task and processing
iSCSI task were not separated.
However, the recent refactoring separate PDU header handling and
PDU payload handling, and then inserted allocating data buffer and
reading data segment in the middle.
If any critical error occurs during allocating data buffer or
reading data segment, PDU payload handling is not done, and hence
created iSCSI task is left in PDU receive process.
If any critical error occurs, the current connection starts exiting
and there is no way to continue PDU receive process.
The task left in PDU receive process is never freed, and hence
LUN hotplug or exiting connection never complete.
This patch do the following:
- Consolidate freeing pre-allocated PDU to spdk_iscsi_conn_destruct()
because this is the only path to exit connection.
- Abort SCSI task of the task left in PDU receive process if found
when freeing pre-allocated PDU. If the task is not SCSI or Data Out,
remove it simply.
Fix issues #1018.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a2464c446c43bf4cfb5afbc0cd78b5bdef7d080
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit Iad6ecdc37493fa9f2d7ccab262a2c75dac2fcd48.
Both estimated cause and code change were wrong and didn't fix
the issue.
The next patch will fix the issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00c8bb515ee39522c0e744dccfb839af15e946c4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472895
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Users already have to poll the admin queue, so embed the io_msg
queue polling there to simplify the API.
Change-Id: I4d4d3be100be0798bee4096e0bbda96e20d2405e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472833
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
