This function add possibility to check if there are any scheduled operations
on particular thread.
Return from spdk_thread_poll() will be used as a way to load-balance and
signify if any work was performed during the single iteration.
A poller could return 0, but still be registered.
This helps especially in fio_plugin that only checked active_pollers or
messages via spdk_thread_poll().
Change-Id: Id6237278eb3b4bd4922b2abaa3c8ebd5e434d45d
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This function add possibility to check if there are registered pollers
on particular thread.
Change-Id: I80af06a10c5c1b54fed5bb28a3aa769a52d8a206
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Explicitly assign values for lvol clear method to be the same as in
blobstore.
Change-Id: Iff19d3ff14929d2160280be1483f0ff282dc2227
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When the specified buffer size to spdk_bdev_io_get_buf() is greater
than the permitted maximum, spdk_bdev_io_get_buf() asserts simply and
doesn't call the specified callback function.
SPDK SCSI library doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
Bdev perf tool also doesn't allocate read buffer and specifies
expected read buffer size, and expects that it is allocated by
spdk_bdev_io_get_buf().
When we support DIF insert and strip in iSCSI target, the read
buffer size iSCSI initiator requests and the read buffer size iSCSI target
requests will become different.
Even after that, iSCSI initiator and iSCSI target will negotiate correctly
not to cause buffer overflow in spdk_bdev_io_get_buf(), but if iSCSI
initiator ignores the result of negotiation, iSCSI initiator can request
read buffer size larger than the permitted maximum, and can cause
failure in iSCSI target. This is very flagile and should be avoided.
This patch do the following
- Add the completion status of spdk_bdev_io_get_buf() to
spdk_bdev_io_get_buf_cb(),
- spdk_bdev_io_get_buf() calls spdk_bdev_io_get_buf_cb() by setting
success to false, and return.
- spdk_bdev_io_get_buf_cb() in each bdev module calls assert if success
is false.
Subsequent patches will process the case that success is false
in spdk_bdev_io_get_buf_cb().
Change-Id: I76429a86e18a69aa085a353ac94743296d270b82
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/446045
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
VMWare Workstation NVMe emulation does not seem to write the
SHST_COMPLETE bit within 10 seconds, resulting in an ERRLOG
during detach/shutdown. So add a quirk to cover these VMWare
SSDs. But rather than squashing the ERRLOG completely for
these SSDs, just add a message instead indicating this is
somewhat expected on these VMWare emulated SSDs.
Fixes issue #676.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3dfcb631feda639926fd712f1f41abb66cbf2096
Reviewed-on: https://review.gerrithub.io/c/445942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Users should not access the internal probe context fields when
using the asynchronous probe API, so change spdk_nvme_probe_async()
to let it can only return the probe context pointer.
Change-Id: I0413c2d8db6cbe4539ad80919ed34dd621a9df70
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445870
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Add spdk_ioat_build_copy and spdk_ioat_build_fill
which mirror the existing spdk_ioat_submit_copy
and spdk_ioat_submit_fill. These new functions
*only* build the descriptors in the ring - they do
not write the doorbell. This enables batching
which can significantly improve performance by
reducing the number of MMIO writes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3539f936924b7f833f4a7b963d06ffefa68379f
Reviewed-on: https://review.gerrithub.io/c/444973
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will enable batching of doorbell writes in
future commits. For now, just make the API public.
This is the first in a series of patches that
drastically improves performance for high queue
depth CB-DMA workloads. Some basic tests on
my Xeon E5-v3 platform shows about 4x improvement
for 512B transfers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia8d28a63f5020ae8644c1efdec7f68740bb6920c
Reviewed-on: https://review.gerrithub.io/c/444972
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
User can create a probe context to probe and attach controllers
asynchronously, the controllers will be added to the context list
for the first step, then users can poll the context until the list
becomes empty.
Change-Id: I3a96e2d8a9724332ff15542f78f9553fdab505e2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442664
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Existing NVMe driver uses a global list g_nvme_init_ctrlrs
to track the controllers during initialization, and internal
function will start each controller in the list one by one
until the list is empty. We introduce a probe context
and move the global list into the context, with the context
we can enable asynchronous probe API in the next patch, also
this can enable parallel probe feature.
Change-Id: I538537abe8c1a4a82fb168ca8055de42caa6e4f9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426304
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the inverse of spdk_thread_get_ctx.
Change-Id: I81541ff1687cfea358cb7046caf69982c38f6a38
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444455
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Schedulers can use this region to store required information.
Change-Id: I93efb44f1a534596f6285bbe014579311fe011e7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444454
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The thread scheduling mechanism is being rewritten and this
won't be used in the new system.
Change-Id: I829e8118ed0a10480bd86934b45e68fcb810931a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444453
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently struct bdev_io holds io_channel that the I/O was submitted
on through bdev_io::bdev_channel, but bdev_io::bdev_channel is private
in bdev.c and cannot be referenced in other files.
Hence add an new API spdk_bdev_io_get_io_channel API to get io_channel
coniveniently.
Change-Id: Ic2e2fde845d324f7a1637e3c75080727a62de5ec
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds two macros, spdk_nvme_cpl_is_success and
spdk_nvme_cpl_is_pi_error. The former will be used to check if
checked read completes normally, and the latter will be used to
know if PI verification should be done.
Change-Id: I425035c7f1e43284857181e0d815e3e001e82f4b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will use the string "prchk:reftag|apptag" as
per-controller prchk options for .INI config file.
Hence add helper functions for them beforehand.
Change-Id: I58c225cc36cc84bf594f108e611028996b5eedb9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443834
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Currently, the SPDK_BDEV_REGISTER_MODULE() macro uses __LINE__
to generate functions like spdk_bdev_module_register_187().
Typically, this is not a problem as these functions are not called directly
rather, they are only used as constructor functions to load the bdevs during
system startup.
There are languages however, (e.g rust) that require these functions to be
referenced explicitly to prevent them from being removed during the linking phase.
In order to reference them, having the names predictable (and potentially
changed per commit) makes things easier.
Change-Id: I15947ed9136912cfe2368db7e5bba833f1d94b15
Signed-off-by: gila <jeffry.molanus@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/443536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This follows smp_mb() implementation in the latest DPDK.
Change-Id: I39f9259a0208579034e5ff39961a2c4b8b72975c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_thread_poll()
This is an optimization if the calling function already knows the
current time.
Change-Id: I1645e08e7475ba6345a44e0f9d4b297a79f6c3c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443634
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is for DIF check types.
Add enum spdk_dif_check_type to DIF library.
Add a field dif_check_flags to struct spdk_bdev and add
spdk_bdev_is_dif_check_enabled to bdev APIs.
Added enum is intended to improve usability. If no enum, the
caller will have to get raw data of flags and mask each bit.
Change-Id: Ia46a37a9684dc968dcc51963674f0a9963e0cd4d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is for DIF settings.
Add fields dif_type and dif_is_head_of_md to struct spdk_bdev and
add APIs spdk_bdev_get_dif_type and spdk_bdev_is_dif_head_of_md to
bdev APIs.
The fields dif_type and dif_is_head_of_md are added to the JSON
information dump.
Change-Id: I15db10cb170a76e77fc44a36a68224917d633160
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443184
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Next patch will introduce enum spdk_dif_check_type for user to
know easily if checking DIF field is enabled or not.
This patch renames bitmask macros from SPDK_DIF_*_CHECK to
SPDK_DIF_FLAGS_*_CHECK to avoid mis-interpretation .
Using FLAGS was derived from SPDK_NVME_IO_FLAGS_PRCHK_* in
include/spdk/nvme_spec.h.
Change-Id: I89e155d047352f54091c14b9251464cd3a72a162
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To support DIF, bdev will need to expose the following information:
- Metadata format
- Block size
- Metadata size
- Metadata setting (interleave or separate)
- DIF settings
- DIF type 1, 2, or 3
- DIF location
- DIF check types
- Guard check
- Reference tag check
- Application tag check
This patch is for the metadata format. Subsequent patches will do for the DIF
setting and DIF check types.
Add fields, md_len and md_interleave, to struct spdk_bdev and add APIs,
spdk_bdev_get_md_size and spdk_bdev_is_md_interleaved, to bdev APIs.
The fields, md_len and md_interleave, are added to the bdev JSON infomation dump.
DIF will be used only in the NVMe bdev module and the upcoming virtual
DIF bdev module first. But additional required storage by md_len and md_interleave
will be very small and they are simple. Hence add them to struct spdk_bdev simply.
Change-Id: I4109f6a63e6f0576efe424feb0305a9a17b9b2e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443183
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Removed their various usages inside the core vhost code
together with the external events themselves. External
events were completely replaced by spdk_vhost_lock()
and spdk_vhost_dev_find().
Change-Id: I1f9d0268c27a06e2eecab9e7d179b1fd54d4223d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Vhost external events no longer do any asynchronous
calls, they only lock the vhost mutex and directly
call the provided function. The mutex encapsulation
isn't worth the additional complexity of splitting
each vdev-handling code into multiple functions, so
we expose low-level APIs that should eventually
replace external events entirely.
Instead of:
```
static int do_something_cb(struct spdk_vhost_dev *vdev, void *arg)
{
struct my_data *ctx = arg;
/* access the vdev and ctx */
free(ctx);
}
struct my_data *ctx = calloc(...);
rc = spdk_vhost_call_external_event("my_vdev", do_something_cb, ctx);
if (rc != 0) { /* err handling */ }
```
We can now do just:
```
spdk_vhost_lock();
vdev = spdk_vhost_dev_find("my_vdev");
if (vdev == NULL) { /* err handling */ }
/* access the vdev any context data */
spdk_vhost_unlock();
```
Change-Id: I06e1e149d6dd006720b021d3bef8d9b7bfaeceaa
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440377
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is only needed within the c file. It doesn't
need to be in the public header.
Change-Id: I0e072ea5eddc6edc84faecee9ef50fb2c20dbb24
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442426
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
trace_record is used to poll the spdk trace shm file
and store new entries from it to another specified trace file.
This could help retain the trace_entires from the overlay of
trace circular buffer
Note:
* trace_record reads the input tracefile into a process-local
memory and writes trace entries to the output file only at shutdown.
* trace_record can be shut down on SIGINT or SIGTERM signal.
A usage sample is:
./spdk_trace_record -s bdev_svc -p <spdk app pid> -f trace.tmp -q
Change-Id: If073a05022ec9c1b45923c38ba407a873be8741b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/433385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In SPDK, we will build isa-l with no shared option
and then integrate it into SPDK. And we do not need
to install isal in the system libaries.
Note: ocf build in autobuild.sh now needs to build
include/spdk/config.h before building the ocf library,
to ensure that header is available in a clean build
environment.
Change-Id: I3f0ce6932b386de17a77cf5bfdfd738b22417e2d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Error check of strtol is left to users of it. But some use cases
of strtol in SPDK do not have enough error check yet.
For example, strtol returns 0 if there were no digits at all.
It should be avoided for each use case to add enough error checking
for strtol.
Hence spdk_strtol and spdk_strtoll do additional error checking
according to the description of manual of strtol.
Besides, there is no use case of negative number now, and to keep
simplicity, spdk_trtol and spdk_strtoll allows only strings that
is positive number or zero.
As a result of this policy, callers of them only have to check if
the return value is not negative.
Subsequent patches will replace atoi to spdk_strtol because atoi
does not have error check.
Change-Id: If3d549970595e53b1141674e47710fe4dd062bc5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Add rte_pause to waiting while loop
This commit also adds spdk_pause as interface for rte_pause
Change-Id: I56e1023731e2e78febaa4f45808d6f07656d290f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Some users require to do write zeroes operation when
erasing data on lvol. Currently the default method is
unmap. This patch adds flag to spdk_rpc_construct_lvol_bdev
call that changes default erase method. This is also a base
implementation for possible future function for erasing
data on lvol bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8964f170b13c2268fe3c18104f7956c32be96040
Reviewed-on: https://review.gerrithub.io/c/441527
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch implements unit tests for the following modules:
* band
* PPA (Physical Page Address) translations
* write buffer
Change-Id: Ia7292bd3027347e8a3da77dafe71cde2c016bf38
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431328
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds the support of read and write separate
bandwidth rate limits control with the configuration file.
Below is the example (in MiB) for the configuration section:
[QoS]
Limit_Read_BPS Malloc0 100
Limit_Write_BPS Nvme0n1 200
Change-Id: I0221516ce70c3fbb07b9e80c1c814ed5ba271c88
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/416672
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds supplementary tracing for OCSSD library to allow
for more efficient debugging and profiling of the user I/O path
as well as the background tasks (maintaining write pointer,
defragmentation, ANM event handling, etc.).
Change-Id: I741f1304f4ee0eba019e31bea7814af475c3296e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Need to check user input and return status of parsing
to prevent app or target from crashing.
Input checking function will be added in the future.
Change-Id: I8167ac13306ae4f81e2cacb80edd9dcf9382c374
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
