This helps ensure thread safety on creation of the
netlink socket, when probe is called from multiple
threads at once. It is also a lot more clean - we just
create it once, rather than checking every time probe
is called to see if it has to be created.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I528cedc3ff44de6ea8ecaf6d2389226502ba408e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2681
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When starting the QEMU NVMe SSD with "cmb_size_mb=XX"
parameter, the controller memory buffer feature is
enabled in the Guest, the SPDK NVMe driver running
in the Guest will allocate the submission queue in
the controller memory buffer by default, it will use
memset and SSE instruction when copying NVMe command
to the submission queue entry or zero the whole
submission queue, inside the memset implementation
the AVX2 instuction will be used if the CPU can support
such feature. However, due to the limitation in the
QEMU, the maximum access width to the PCI BAR space is
set to 8 Bytes, SPDK will report illegal instruction
in Guest.
Here we add a quirk for the QEMU emulated NVMe.
Fix issue #1362.
Change-Id: Ib5e2e4198d39ce7f8455175f7db283db0b01eebf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2196
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patch made sure that CQ/SQ are allocated in
physically contiguous manner:
(64db67) nvme/pcie: make sure sq and cq are physically contiguous
Using MAX_IO_QUEUE_ENTRIES is enough to make sure that either
queue does not span multiple hugepages.
Yet the patch made sure that whole page is occupied only
by the queue. Which unnecessarily increases memory consumption
up to two hugepages per each qpair.
This patch changes it so that each queue alignment is limited
up to its size.
Changes in hugepages consumed when allocating io_qpair in hello_world
application:
io_queue_size Without patch With patch
256 8MiB 0MiB
1024 12MiB 4MiB
4096 24MiB 16MiB
Note: 0MiB means no new hugepages were required and qpair fits into
previously allocated hugepages (see all steps before io_qpair
allocation in hello_world).
Intersting result of this patch is that since we required alignment
up to the hugepage size this resulted in reserving even two 2MiB
hugepages to account for DPDK internal malloc trailing element.
See alloc_sz in try_expand_heap_primary() within malloc_heap.c
This patch not only reduces overall memory reserved for the
queues, but decreases increase in heap consumption on DPDK side.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I75bf86e93674b4822d8204df3fb99458dec61e9c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2244
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Commit 9ad044c4 remove the offset parameter in nvme_pcie_ctrlr_alloc_cmb()
and uses spdk_vtophys() to get the physical address of the submission
queue, however, the memory isn't registered to SPDK yet, so use the
offset to get the physical address again.
Change-Id: Ida0f4a8bf1e72d6446fba442a1b71f0ddaab4bb8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1933
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When iterating SGL segment, we can use existing virt_addr parameter
to return UINT64_MAX as a special value to indicate this segment need
to be described as Bit Bucket SGL.
Currently only READ command is supported, we can enable the WRITE
and COMPARE support when necessary.
Change-Id: I50aa2b226ec3449c13ed1d97b3224ee8e7de95a8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1467
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the request contains separate metadata buffer, we should set
PSDT 10b when hardware SGL is supported and dword alignment is
required. SPDK driver doesn't provide SGL metadata data buffer
APIs for now, the separate metadata buffer is alway contiguous,
so we can put the metadata buffer into a data block SGL entry.
Change-Id: I9ccfce755a3169cd2c9b908e4da76081155d9613
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1466
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
alloc functions
Make the signature look more like spdk_dma_malloc and family.
Change-Id: I6a31acf3b9edd136924b6e53b9a23c699429b9dc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/788
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Separate these two operations into different functions. It is
possible that a CMB may not be visible from the CPU, but still
be present and have data transferred to it by some other DMA
engine. Generalize the API to handle that case.
Change-Id: Ifcd282af0db734fe4a6ef2283ae8e8933d017809
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We only need to register the memory for the CMB if the user
plans to map it for use with data. Delay the operation until then.
This also gives us a way to support unmapping the CMB.
Change-Id: I6121ae2cc3f6f44efae8b52b6582ff9f68432bc8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/786
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Currently nvme_completion_poll_status object is allocated using
malloc, so it may cotnain some garbage. In some scenarious
nvme_completion_poll_cb can be triggered before we enter
spdk_nvme_wait_for_completion_*. In that case status object
will be freed by nvme_completion_poll_cb if it contains a
garbage in `timed_out` field. Later spdk_nvme_wait_for_completion
will work with already freed memory.
Fix - allocate nvme_completion_poll_status object using
calloc and explicitly zerofy it before usage
Fixes#1292
Change-Id: Iac39653a6cd102471de16e65814f0760bbeda7d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This API will allow us to simplify the polling mechanism for qpairs on a single
thread. It also will pave the way for doing transport specific aggregation of
qpair polling to increase performance.
The generic implementation is included. The transport specific calls
have yet to be implemented.
Change-Id: If07b4170b2be61e4690847c993ec3bde9560b0f0
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/579
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the drives report that SGL dword alignment is required in
Identify Controller data structure, when using separate metadata,
PSDT should only be set with 10b. The specification says: If PSDT
01b was used, Metadata Pointer (MPTR) contains an address of a
single contiguous physical buffer that is byte aligned.
For supporting this case, SPDK driver needs a metadata SGL entry,
so we can reserve one entry in the tracker data structure.
Change-Id: I2d86a58b0395c3000626f922e56d7f2212c8a752
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
PSDT 00b also need to check the metadta alignment.
Change-Id: I117f524c61bc4c712b46c91e4d51549825d06f6c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We only set the flag to false when the controller reports SGL supported
and can use byte contiguous buffer. Also check the data block's alignment
for hardware SGL.
Change-Id: Id936c49823963000d0543fc95fbb6edba3118feb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Align rdma and tcp to respect opts. Reduce default number of entries
for admin queue so it becomes memory optimization.
Linux driver by default creates admin queue with 32 depth, there is no
good reason to enlarge that queue by default within SPDK NVMe driver.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I97ceea8f350c52313021a63190fb0980f604c48e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Users may only set the transport type, but for the actual probe
process, the trstring field is mandatory, so set the trstring
based on transport type at first. Also remove unnecessary
spdk_nvme_trid_populate_transport() call from each transport
module.
Fix#1228.
Change-Id: I2378065945cf725df4b1997293a737c101969e69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1001
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is allowed by the specification, but preventing using both
of these features simultaneously will make some upcoming patches
much simpler.
Change-Id: I1abb7d9c02c105a50b1603bfab8eec2025289123
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/782
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Keep them grouped together for clarity.
Change-Id: I51be01802b69aa722dec458fda56e4e396edbfeb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All of the code now goes through the transport plugin system,
so this isn't necessary.
While doing this, caught a bug that the get_registers function
wasn't being set for the PCIe transport.
Change-Id: If19a933e0c6f656bc55232b15d59052e22af3ee9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/711
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A pointer to a stack variable is passed as an argument to
nvme_completion_poll_cb function, later this variable is used
to track completion in the spdk_nvme_wait_for_completion() function.
If normal scenario a request submitted to the admin queue will be completed
within the function which submitted the request.
spdk_nvme_wait_for_completion() calls nvme_transport_qpair_process_completions
which may return an error to the caller, the caller may exit from the
function which submitted the request and the pointer to the stack variable
will no longer be valid. Thereby the request may not be completed at that time
and completed later (e.g. when the controller/qpair are destroyed)
and that will lead to call to nvme_completion_poll_cb with the pointer
to invalid stack variable.
Fix - Dynamically allocate status structure to track the completion;
Add a new field to nvme_completion_poll_status structure to track status
objects that need to be freed in a completion callback
Fixes#1125
Change-Id: Ie0cd8316e1284d42a67439b056c48ab89f23e0d0
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481530
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The trtype should be stored as both an enum and string. This is intended to
help pave the way for pluggable NVMe-oF transports.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I6af658d7a17c405e191ff401b80ab704c65497e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
This patch adds first_fused_submitted field in spdk_nvme_qpair
structure which is used for postponing ringing a doorbell for
fused commands.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibfc43931891ebaadbafa4895c05af9f228440210
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use a lookup table with function pointers to build
the request depending on the payload type and SGL support.
This change helps to remove several if/else branches
Change-Id: I506e4290efc218be68fc8cfda4835b242a99aa77
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Command with cns SPDK_NVME_IDENTIFY_ACTIVE_NS_LIST is issued during
controller initialization and if the controller supports SGL,
this command will be built as a contig SGL. This leads
to a failed completion with the following status:
INVALID FIELD (00/02) sqid:0 cid:95 cdw0:0 sqhd:0004 p:1 m:0 dnr:0
The first identify command SPDK_NVME_IDENTIFY_CTRLR passed since
it was built as a PRP command - we didn't know that the controller
supported SGL at that time. Fix - do not build SGL requests
for admin qpair
Change-Id: I72ab7fe33c03e60ea9f20a9c8afd7c79c40843aa
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478320
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
mapping length is initialized with 0 and spdk_vtophys() returns
min(*mapping_length, cur_size) or 0. So length -= mapping_length has no
effect and req will be failed when nseg reaches NVME_MAX_SGL_DESCRIPTORS
Initialize mapping_length = request length
Change-Id: I9082866b7f8055d99fa6930a78335b3b0fdf9b2b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477575
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The hardware sgl format can describe large contiguous
buffers using just a single element, so it's more
efficient that a prp list even for a single memory
segment. Always use the sgl format.
Change-Id: I9c62582829f0d64dcd1babdbc48930ddb4d9e626
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
NVMe hotplug must be monitored in the primary process -
DPDK doesn't support trying to handle it in the
secondary process.
This issue was somewhat masked previously in secondary
processes, since usually it would just probe(NULL) which
meant probe all attached NVMe controllers. So in the
secondary process, we would probe just once, and create
the hotplug fd - it would never actually try to monitor
it.
But when explicitly specifying multiple trids in a
secondary process, probe would get called multiple
times. First time would be fine since it only creates
the hotplug fd. But second time would segfault since
monitoring for hotplug requires checking the DPDK-allocated
context which doesn't exist in the secondary process.
Fixes issue #1063.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a9a91e222c206034293d90e30e3f598c8d7baa8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently we have a mix of -1 and -EINVAL which
is confusing, especially since these types of failures
also result in the caller's callback routine getting
invoked.
While here, document this new -EFAULT return code for
all of the functions that could return it.
Fixes issue #797.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8dfbba0ec0b83db0f2ec055b15830981af1965df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473054
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This wasn't being done in the previous case which meant that I/O qpairs
were not being moved to the connecting state when connecting for the
first time. However, to prepare the way for a coherent state machine for
nvme qpairs, we need to ensure that all qpairs go through the same
states.
Change-Id: I3cfe799a003acd926b24c107ab1461a96239c1bb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit bc4e31d6b2.
This change was accidentally merged after it was decided to go with a
different architecture.
Change-Id: Ifc9d8b08bd1fcbc4ace8dd6fb4bd0014330916ed
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471144
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The remove callback is a built in way of alerting the user application
that we have removed a controller. Once we fail a controller, we never
move it back out of that state so it is in essence removed.
Change-Id: Iaad6bef0994e9ddd5a424f6b83502f9191b2de49
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Making this structure available from the ctrlr allows us to call the
remove callback when the controller is failed/removed on transports
other than pcie.
Change-Id: I2c66dfef12b039c0d6daf7df83da745757818006
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
