There was an assignment in perf that prevented the user from actually
disabling keep_alive. If the user specified 0, it would get overridden
by the default opts value. So set the global in perf to a reasonable
value, and always use that value when setting the keep alive timeout.
Change-Id: I2eba14525613d679d7def29cc9ed312851cae156
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is sort of like the periodic stats that fio
prints every second or so. We can add more to this
later, but this by itself is a nice improvement I
think.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4ac588c8301bae9924dd6541cbc386ffe8d06b5d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When initiating the io_u strcture from FIO, always
set the engine_data to NULL first as the io_u structure
is just malloced from FIO without specifically setting
to zero.
In the io_u free path, the engine_data field is checked
whether to NULL or not. To avoid mischeck issue, explicitly
set the engine_data to NULL at the beginning of the io_u
init path.
Change-Id: I52c8c251f36925650a44d14e35781bd8494ff358
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472916
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be used in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie88daa20842f5f166b4a7a5abccafd6683d6da64
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
There's little use to the "Starting thread on core XX"
messages - they may have served a purpose at some point,
but the other messages showing where each controller
is associated is sufficient.
Also remove the "Attaching to..." message - the
"Attached to..." message is sufficient here too.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9543e8f3f6d7b6e28238cba27fc1e4194908f3b7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
The core number may be 1 or 2 characters, and the
printf format wasn't accounting for that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c87466df1014fb6c0a4e7db1a9b6f6054559eae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
When we specify a queue depth that may be higher than
the io_queue_size, we print a warning indicating this.
But it was also setting the g_warn flag which would
result in this message also getting printed:
WARNING: Some requested NVMe devices were skipped
But we don't actually skip any SSDs in this case. So
remove setting of that flag in this case.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic63209f1a96990dac9664ce245c6406c37248494
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Modifying the target_disconnect.sh test to include an example of
transport_id failover for an NVMe-oF controller.
Change-Id: I746ed737ab56c7dec6ee99e840c631ba46ee359e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472230
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is simply a dumbed down version of perf so that we don't add extra
functionality to perf that might impact its performance.
Change-Id: Ia2716a61abcc5269dafcda394d40517d156fdb2a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The puprose is to print some trace info. We support
it in nvme identitfy. Also -L is occupied by other usage,
so we use -T instead.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I29f018c2a5951e5e3aad04dbeaa7ee74a2d7e3f4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469919
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When PRACT is set, if metadata size is 8 bytes, PI is stripped
(read) or inserted (write). Hence block size must not include
metadata size for extended LBA payload. This patch fixes the issue
by reducing metadata size from block size for this case.
On the other hand, When PRACT is set, if metadata size is larger
than 8 bytes, PI is passed (read) or replaced (write). So block
size is not necessary to change for this case.
The wrong block size didn't cause any visible issue but should be fixed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3351e3e3b7816f726752e85604cf557251d9870c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468018
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
g_metacfg_prchk_flags had been used to pring PRACT setting. This
didn't cause any issue but will lead to misread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2f6c48b12ffa511afa2663d31dc9467cec980c9c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468017
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When PRACT is set, if metadata size is 8 bytes, PI is stripped
(read) or inserted (write). Hence block size must not include
metadata size for extended LBA payload. This patch fixes the issue
by reducing metadata size from block size for this case.
On the other hand, When PRACT is set, if metadata size is larger
than 8 bytes, PI is passed (read) or replaced (write). So block
size is not necessary to change for this case.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I930c8a07519a4742c44240801b068fac2c4802a7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465708
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If PRACT is enabled, DIF context was not initialized. However it was
expected that PRACT is passed through DIF flags of the DIF context.
Hence PRACT was not set in NVMe command even if user set PRACT.
This patch fixes the issue by passing fio_qpair->io_flags instead
of dif_ctx->dif_flags.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcb74fc8f74f863d8b53d53484fdea66f4b5db8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: James Bergsten <jrb@thebergstens.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DIF context has to be initialized both for read and write I/O. However,
it had been initialized only for write I/O unintentionally after
refining error processing.
This patch fixes the issue.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I363da40ddba186e52fd0dfce37cfb0dea325040d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: James Bergsten <jrb@thebergstens.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Arbitration Burst is valid for both round robin and weighted round robin
arbitration.
Change-Id: I0046194ef510bf255ac0527bc6b1d2dc0648b7cb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466686
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As SSDs with namespace management become more prevalant,
improve the identify utility to clarify things like the
total number of namespaces, and that data is printed out
for active namespaces only.
While here, change an active namespace check to an
assert. The print_namespace() function is only
called for active namespaces, so the check and print
was a bit confusing since it is never seen with SSDs
with inactive namespaces.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib21772579b94c5bcd1c518adb9d3341f4bf824f6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466818
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Some SSDs have inactive namespaces under normal circumstances,
especially those that support namespace management. Printing
error messages for these can be confusing to users. So just
remove that log message.
This removes the only usage of cdata in register_ns(). But
that cdata assignment was prefaced with a useful comment for
readers of this example code. So move that comment to
attach_cb() and restructure the code there a little bit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I844e860ea0856d73ca535b6fcbd14279b96da4f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
perf is under the examples directory, but it's much more than
an example application and probably needs to be moved. We use
the libaio functionality extensively as part of benchmarking
and comparing the SPDK driver with the kernel driver. So we
need to keep this functionality.
This reverts commit b3d9ebae21.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifb9a1df919d32a98c328101029cc22e91915a976
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466795
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Users can use '-N' option to disable shutdown notification
for faster shutdown process.
Change-Id: I227dc4da3aa2f89d23f9b235e979cb6d3e25d635
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In case the previous controller already initialize the valid flag to TRUE.
Change-Id: I2896e5a8bd2bca6c0d67bba412b859e96f73d28f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Only SPDK_NVME_FEAT_ARBITRATION feature bit was used.
Change-Id: Ic81ae6d63716d648aee13dc656ff4172deaba898
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some drives can return get features with Arbitration feature ID successfully even
the drive can't support this feature, so we will not print this information for
the drives which can't support this feature.
Change-Id: Ife8a40120de7adcacd99d8513cfbcae1c15330dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
features are global variable and can be used for different controllers, e.g: there
are 2 controllers, the first one can support Arbitration feature, and the second
controller can't support Arbitration feature, the value from features[fid].valid
may contain the first drive's old value.
Change-Id: If020a0413a8a32e2be25ecccb5baf0a82d99371b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Original intention most likely was to compare nvme lib to
aio, but since then aio bdev was developed.
There should be no need to keep the support for AIO in
perf example app.
Change-Id: I716f2164b8eaef16db05b4fffa35393c7d916e0b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461593
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Admin can enable user and add user to locking range.
Then the user can lock/unlock his range.
Change-Id: Ifc5a8cf5c6b5febeb59c86333981f0cf5b938500
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we use getpass. But it looks like this
is obsolete, this patch is to fix this.
Change-Id: If3b667cea8e09aab170bfdb75b8d51e6855bb0b0
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
scanf format specification '%ld' expects type 'long int *' for 'd',
but parameter 2 had a different type 'uint64_t*'.
Changed to SCNu64 to reflect the type for range_length and range_start.
Change-Id: I1637b2f7e982a33b45bc765a3e16f7f1302d84cb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch removes HAVE_URING CFLAG that was unused by
the perf.c
Change-Id: I8af85324db147989e0d3b9bd48faa9587c23be06
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This change attempts to address the Trello request to decode I/O errors in
NVMe hello_world example.
See https://trello.com/c/MzJJw7hM/2-decode-io-errors-in-nvme-helloworld-example
As part of this change, spdk_nvme_cpl_get_status_string was declared
in nvme.h, and spdk_nvme_qpair_print_command and
spdk_nvme_qpair_print_completion were renamed and added to nvme.h,
allowing all three to used "externally."
To test the failing paths, two compile time defines were added to force a
write or read error (bad LBA) respectively.
As the example does a read after write, if the write fails, the example fails.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Ib94b4a02495eb40966e3f49517a5bdf64485538a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457076
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fio will allocate metadata buffers for each request, even the NVMe namespace
wasn't formatted to separate metadata, it's not an error to set the metadata
pointer to NVMe command, but still it's better to set it with real cases.
Change-Id: I1d29b6be65cfa6ba1c20d31906bcee5e8e2decf8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461349
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Print the type of metadata (extended LBA / separate buffer), even if
protection information is disabled. Changed the way protection
information's location is reported to be more accurate (previous
"Metadata Location" wasn't precise enough). Aligned all of the namespace
information fields, so that all values start from the same column.
Change-Id: Ia736db233cbcfdddcfd4a1437907e528f2b8947b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
free resources when error was triggered in nvme_manage
Change-Id: Ibdc020ffb5abd3d614fe85e54788b1818ef5af1e
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The ns_ctxs of worker_thread are organised as a list, so they
should be freed totally.
Change-Id: I348cacb12c338dfe0df100e1dc3de7b9f95bfda1
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458036
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In order for fio_plugin to compile a replacement is needed
for CLOCK_MONOTONIC_RAW, since FreeBSD does not support it.
In that case CLOCK_MONOTONIC is used.
Change-Id: I234ce4d932baf9c5399a46f9f4676315351e720c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
New flag -V was added for VMD enabling.
Change-Id: I2d090a70b9d9b2bd996467a9b3da908f6eed1062
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457601
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Try to enumerate VMD devices in fio_plugin.
New flag enable_vmd was added to fio config.
Change-Id: I5546665719e4ef2b169d403db8bf0398e834dbc4
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
New flag -V was added for VMD enabling.
Change-Id: I0a31994acd5fd677366e8d5e49ad9a3583670c2c
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
New flag -V was added for VMD enabling.
Change-Id: Ie0feae1bdfce39ad246f57411d00587c6417d21d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
fio_thread->iocq allocated on line 403 was leaked when
fio finished its run.
Change-Id: I740dcaa1e0037283d099ddf4bc125cec57cfdbcc
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456623
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
verify_io is a function pointer, so avoiding the
call altogether is beneficial. We know that no
verification is possible if md_size == 0, so use
this to determine if the call should be made.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I75f01e4f56aacb0f7babd2342efc6014f886667d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456249
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The compiler wasn't always inlining this. Inlining
results in a small optimization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I34240d85439b7329fab7151ae4f8b02f44c4d7d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456248
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Now that we print the addr/nqn for fabrics controllers,
adjust the column width in the output so that it prints
the full information for fabrics, but keeping a smaller
width when it is only PCIE controllers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3532a8928a806b8084047f6686c37cd02d015983
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The serial number doesn't provide much value - but the
transport id can sometimes be helpful though to correlate
performance of different devices to their PCI BDF.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I529f111311108a6efc1ba23129963bb4383d3bdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456078
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These are the names displayed in the output. Some
upcoming patches will modify these names, so making
this a common function now will reduce the work
later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I11cb8f607a66523becdcf621d8d6c911aec4427d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
mk/nvme.libtest.mk includes mk/spdk.common.mk, but all
of the Makefiles including mk/nvme.libtest.mk were
also including mk/spdk.common.mk unnecessarily. So
remove the spdk.common.mk include from all of the
offending Makefiles.
This was relatively harmless, although it would cause
weird things like CFLAGS and LDFLAGS getting duplicated
when building.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie60637db3c19a2ead097562b2adf6573dbe27472
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455321
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add uninstall target to makefiles to be able to perform
reverse of install target.
Fixes#464
This patch adds 'uninstall' target to makefile.
'make uninstall' will remove spdk_tgt app, headers, libraries
and shared libraries from system directories defined by $DESTDIR.
Additionaly, if there will be any empty directories left after
this operation, they will be removed as well.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I7b07fb4b81081d3914ff09165991fbe3a26b9067
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reset the device to its factory defaults.
Change-Id: I43f7dc8fb7bd5226283a4762beac0e2cf016f698
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Assert that spdk_nvme_ctrlr_get_ns() does not return NULL.
If display_namespace() would proceed with ns == NULL,
functions below will segfault since the input is not verified there.
Change-Id: I12c4b617aca703f07275fbc6ab593b42c25e2ccd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also make some modification for invoking process in
nvme_manage tool.
Change-Id: Ib54db43d7336d3e839e7d9317c292b9a57b38f80
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The perf tool's bandwidth data is MiB/s, not MB/s.
So update the data description part.
Change-Id: I770cc0d7c0f0a4d56cb4eff593e88fbed55e3ed6
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451319
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
First submission. Implemented part of the Opal library
and "scan" function. Can be invoked by nvme_manage.
Change-Id: Iba86d86dd3af06a06b6805120ee5005af8183459
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439335
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FIO is going to always present a contiguous buffer to us. But we can
fake out the nvme driver with a couple of global variables.
Change-Id: I038e70582043e1d7c1800ed065fe126aa091c290
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439608
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When test hotplug, the timeout callback will set the attach callback
to NULL, so it will not add the drive back to hotplug tool automatically
sometimes.
Change-Id: I91a7c29059a7f680b2a0b7b79cf0a62c5638dcda
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For some testing, we need queue pairs to exist but not actually
be in use.
Change-Id: I2b17ff0172c9ec002692babcf7d4d612c3062eb4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/392977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
liburing is a wrapper around a new Linux kernel interface for
submitting I/O using user space rings. This patch simply
adds the ability to link the nvme perf tool to liburing, but
doesn't implement any of the new functionality yet.
Change-Id: Idb741c87b6d951c013af86e30eac18d3834dd4b7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444711
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Queues will be doled out to cores as available.
Change-Id: Ib6a0fe846a9d90b659754be1c11ae022abbe38a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/391876
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This tool continually polls for completions, so it
is safe to turn this on.
Change-Id: Ice1c68cdaff070f8edd428621e19a6fb44fb8c31
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since fio is continually polling for completions, this
option can be safely enabled.
Change-Id: I02ee3d2507d3b37f79e14d69fe90ee19c4b4eea2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447711
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Existing fio plugin tool uses hardcoded application
tag and application tag mask for end-to-end data
protection, we export the two options to users
now.
Change-Id: I64d89c29e99030ce8daa2947e73d941b73ac4a8e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446384
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing APIs used in the fio plugin tool already
contain the separate metadata parameter, so we just
need to allocate a separate metadata buffer for each
request, by default, each request will have 4096
metadata buffer size when PI enabled with separate
metadata, but also providing an option here to let
users can input bigger value in case one request
will need larger metadata buffer size.
Change-Id: I51679c5cb7f7b1599b81287b1fbb8d9be7959191
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also set the errno for submitting and verification path.
Change-Id: I97e94eb3c63167eed2f0b14fa7b79c42add834a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447558
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Uninitialized namespace struct will be all zeros.
Some drive might have multiple namespaces but not initialized.
nvme_manage will get to segment fault when this happens. This
patch is to fix this.
Change-Id: I8ea5bf3d7c29cf876fbea3d1bee22b95748d3b8a
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447414
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If multiple numjobs and filename were used in fio tests, one thread may
have a list of queue pairs, so we should store the queue pair when
submitting a new request.
Change-Id: I585cd40ea4295b94c8766f9adfa5a7344cb0bc3c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447272
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The example would endlessly loop in unregister_dev()->spdk_nvme_
ctrlr_free_io_qpair(), if the device has been removed after leave
hotplug monitoring. Add the timeout callback to handle this corner
case. The case will not be friendly to newcomers, if we use the event
framework to update it, because the hotplug has been hidden in frame
work.
Change-Id: I33a81efd356fdf1e7921f5721e9d95936470e8b0
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
If do not do that, we will continue polling. And checked
the exceptional handling of aio_check_io, it will just exit.
So we add such case, thus we shall not poll the qpair again.
This is especially useful when we use perf to test against
NVMe-oF target.
Change-Id: Ib820e0b80f80cfceb1ea5e08b359f50d9e360b30
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/444325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If spdk_nvme_probe fails, there will be no controller,
and we jump to clean up. And the thread is not created,
so we need to judge the value of thread. if it is not zero,
we will do the pthread_cancel. Otherwise, we do not
need to call that. If we call that, it will have coredump.
btw: we also fix an small issue of cleanup.
Change-Id: Iee854f6ef42ef6d4a3d3f63d57740375e293a3ba
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444147
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
perf application can't generate IO for NVMe namespace with
more than 4G size.
Example of error:
"Attached to NVMe over Fabrics controller at 1.1.75.1:1023:
nqn.2016-06.io.spdk.r-dcs75:rd0
WARNING: controller SPDK bdev Controller (SPDK000DEADBEAF00 ) ns 1 has
invalid ns size 0 / block size 4096 for I/O size 4096
WARNING: Some requested NVMe devices were skipped
No valid NVMe controllers or AIO devices found"
ns_size variable is uint32_t, spdk_nvme_ns_get_size function
returns uint64_t. Result can exceed the maximum size of
uint32_t and ns_size remains 0.
The issue introduced by commit: f2462909
Change-Id: Idc6dd8688d5d6268bda1a1d6b06a611643af6155
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/443996
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Apply the new DIF library to DIF generation and verification.
Condition to use DIF generation and verification are changed
only about DIF type. DIF type 3 is supported in this patch.
DIX is not supported in this patch.
The case that PI is located to the first 8 bytes of the metadata
is not supported in this patch too to because how to pass PI location
is not fixed yet. But this limitation will not be critical because
PI is located to the last 8 bytes of the metadata by default.
DIF insertion and strip will be required not to destroy data by
DIF generation. But this is still added in the TODO list even after
this patch.
Change-Id: If08bcaaaa9f4e0fb4f373ef844b88b38cfffc6b5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Keep alive was enabled with RDMA/TCP transport by default, for
perf tool we should also enable it or the nvmf target may
disconnect when timer expires.
Fix issue #609.
Change-Id: Ibd4073c4a4ac398d601285d3bf64631058046c59
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441834
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds DIF generation and verification for NVMe namespace
formatted with DIX.
Change-Id: Ic67c88c485aacffa40fd0c73ba164f2cb1f88991
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/439969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For the commands sent from upper layer, the NVMe driver may
split one command into several children requests based on
stripe and data length, so number of requests in each queue
pair has a value which is start from 512. we must ensure
that the number of request in each queue pair is big enough
to process all the commands, e.g: a user's input for a 512KiB
read can be divided into 5 children NVMe commands when maximum
transfer length is 128KiB, in addition, one parent request is
occupied to track children commands.
Fix issues #566 and #573.
Change-Id: I162da8e1e15692625ce311e68a72c89b6492dd56
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Apply the new DIF library to IO submission and verification.
Condition to use DIF generation and verification are not changed
in this patch.
appmask, apptag, and lba in struct perf_task are duplicated with
members of struct spdk_dif_ctx and are removed in this patch.
Change-Id: I68ccfb41cce2546d7145417c1490f49f0e62bb7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/437907
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Currently, DIF information is extracted by NVMe name space API each
time. This patch changes to extract and hold DIF information at
namespace registration and use it.
Change-Id: I6ce857bf5df5fd5972bdca8b52226d1fb81e40c7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/439653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove unused apptag_mask and apptag in struct ns_entry.
Change-Id: I2da7ee099c8b18c93a9525e7195c1f98bc5a9543
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440674
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
