For the number of trace entries, change strtoull to spdk_strtoll
because no issue will occur by the change.
Besides, getopt guarantees that if an argument is followed by a
semicolon, optstring of it is not NULL. spdk_app_parse_args()
had unnecessary NULL pointer check related with this. Hence
remove those NULL pointer checks too.
Change-Id: I33d0328205d1765f70f70fc734d0d8b4165fef5e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441641
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Without this check valgrind complains that we are using
uninitialized variable.
Change-Id: I5cb73d10e167004f6e4df9e3621ec3b35ec2448d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442519
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In SPDK, we will build isa-l with no shared option
and then integrate it into SPDK. And we do not need
to install isal in the system libaries.
Note: ocf build in autobuild.sh now needs to build
include/spdk/config.h before building the ocf library,
to ensure that header is available in a clean build
environment.
Change-Id: I3f0ce6932b386de17a77cf5bfdfd738b22417e2d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
The io_device associated with the aio bdev was only
getting unregistered when the aio bdev was explicitly
deleted - not in the implicit deletion path at shutdown.
Move the io_device_unregister into the destruct_cb -
this makes sure the io_device is always unregistered, whether
the bdev is getting unregistered via an explicit RPC or
implicitly in the shutdown path.
Fixes#618.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I44b77f5c38339f4cf97b02c0ee4002bf5fcc9998
Reviewed-on: https://review.gerrithub.io/c/442119
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Verify that the namespace used is formatted with a supported LBA format
(4K block size).
Change-Id: I59e2ed71354e8530d9fa0e3f6b323ded83097afa
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Existing specific vhost socket messages for vhost-nvme target
will get some information from backend target before start_session
call, so we should iterate the associated nvme controller by vid
but not session.
Fix issue #628.
Change-Id: Ia400bf33895a0feee0058a870f26b0ff72b7556f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442498
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Marked as deprecated in 18.10.
Change-Id: I40d0e6103623aee6e6a0b9fa6e82f7b826ca1fe6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442420
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Error check of strtol is left to users of it. But some use cases
of strtol in SPDK do not have enough error check yet.
For example, strtol returns 0 if there were no digits at all.
It should be avoided for each use case to add enough error checking
for strtol.
Hence spdk_strtol and spdk_strtoll do additional error checking
according to the description of manual of strtol.
Besides, there is no use case of negative number now, and to keep
simplicity, spdk_trtol and spdk_strtoll allows only strings that
is positive number or zero.
As a result of this policy, callers of them only have to check if
the return value is not negative.
Subsequent patches will replace atoi to spdk_strtol because atoi
does not have error check.
Change-Id: If3d549970595e53b1141674e47710fe4dd062bc5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/441626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was marked deprecated in 18.10
Change-Id: Id47e770b0388c935fe684aeef7a9824f24cef47f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442416
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add rte_pause to waiting while loop
This commit also adds spdk_pause as interface for rte_pause
Change-Id: I56e1023731e2e78febaa4f45808d6f07656d290f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436494
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Use mempool for allocating OCF requests with constant size
Previous method was using mallocs which is significantly slower
Change-Id: I539ff22efc18fbd353ceb2687ea211d2baaa7523
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
One of the messages we send on memory hotplug event is
SET_VRING_BASE, which tells vhost e.g. the position in
a vring it should start processing requests from. Sending
this message with any outstanding I/O could cause that
I/O to be never processed as it could be at a vring
position that won't be practically polled.
To fix the above, we don't send SET_VRING_BASE message
on memory hotplug event anymore since it's completely
unnecessary. It was sent together with a couple other
messages that would reinitialize the vring, but we know
vrings occupy a memory buffer that won't be hotremoved
during vring lifetime. We also know that vring GPAs will
never change. Hence we can initialize the vrings just
once on device start now.
We still need to send SET_VRING_ADDR after updating the
memory table, as rte_vhost depends on it to apply that
new memory table. Luckily, this single message doesn't
cause us any trouble.
Change-Id: I2125099f1cf3f8c76e8160ec819bd1a9a3e7823c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We assumed the second descriptor in an I/O descriptor
chain will always point to a payload buffer, but in case
there is no payload, the second descriptor will point to
a response buffer. The vhost code doesn't provide proper
checks to handle such case, so to avoid various errors
down the stack, we just fail all requests with no
payload.
Change-Id: I6785c2843d6db4fc17e68e03562c2a1530bb469b
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dstepanov.src@gmail.com>
This ensures that SPDK will detect descriptor chains
that are too long.
The additional check in vhost block stands as an
optimization and makes us fail the corrupted I/O early.
Change-Id: Icceaa0dd938dca96a1872e5ee96bf6a151fdd9e7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Dima Stepanov <dstepanov.src@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/433641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK doesn't provide sufficient runtime checks to properly
handle clients with memory sizes that aren't 2MB multiples
and could potentially segfault during I/O processing.
That's why we'll reject such clients now.
Change-Id: I34e85be5b5c6df863371d0ad688f228ed44107ff
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/433640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add new RPC method for OCF bdev: get_ocf_bdevs
It is useful in respect to not registered OCF bdevs
which do not appear in standard get_bdevs call
Change-Id: I8a5fc86a880b04c47d5f139aa5fa4d07ca39c853
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add basic handling of base devices hotremove
When either core or caching device gets unregistered,
the vbdev_ocf does so as well
Change-Id: I05769f714bf22cb320558fed86adc8c3d8a0a185
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/435729
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Since we have different requirements for submitting RDMA read and write
operations, we should track them separately so that we don't block
writes when the device does not have enough resources for read
operations.
Change-Id: I5d6424c0e26f2f5362866d1bb21eb46700c245da
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Before, the number of WRs and the number of RDMA requests were linked by
a constant multiple. This is no longer the case so we need to make sure
that we don't overshoot the limit of WRs for the qpair.
Change-Id: I0eac75e96c25d78d0656e4b22747f15902acdab7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add OCF module based on OCF meta-library
Open CAS Framwework (OCF) is high performance block storage
caching meta-library
It is open-source, published at https://github.com/Open-CAS/ocf
With this patch OCF-enabled device is represented in SPDK
as virtual bdev having core and caching devices as its base devices
This patch includes implementation of:
* OCF top adapter (vbdev_ocf.c)
* OCF bottom adapter (dobj.c, data.c)
* Adaptation layer for OCF (env/)
* OCF context abstractions (ctx.c)
Adaptation layer and context abstractions are not dependent on SPDK bdev
OCF bdev supports reads and writes, configured at startup
Other features will be added with separate patches
Change-Id: Ic2dcab378c8238d16f1e4b64d4374bdf257565bc
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/435708
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_spdk_bdev_io_submit uses the bdev_io->internal.in_submit_request
flag to ensure we unwind in cases where the I/O is completed
inline (i.e. malloc or null bdevs). But when an I/O gets queued
for QoS, and then we iterate through the queued I/O in
_spdk_bdev_qos_io_submit(), this flag was not getting set
when those I/O would get submitted to the underlying bdev. This
would allow for _spdk_bdev_qos_io_submit recursion, resulting
in all kinds of different types of memory corruption.
Fixes#613.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I29263f4e7b2ead60f08b60474d210defa803348c
Reviewed-on: https://review.gerrithub.io/c/442127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
It is perfectly valid for a bdev to not support the
unmap command - there's no need to print an ERRLOG
when a SCSI INQUIRY 0xB2 (LOGICAL BLOCK PROVISIONING)
command is sent to query if the LUN supports it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18389df4d55a1ac186707d624ddea292a5470e80
Reviewed-on: https://review.gerrithub.io/c/442104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Technically this check is correct, but the Linux kernel
target doesn't have it, and older versions of libiscsi
have a bug which result in stale ExpStatSN getting sent
resulting in terminated connections with the SPDK iSCSI
target at high queue depths.
Fixes#600.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I76eaf9dee2d733bfa3f8d43b86528de6b556cbd6
Reviewed-on: https://review.gerrithub.io/c/441981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Those cases should never occur. Klocwork pointed out
possible dereference based on the returns later in
the functions.
Change-Id: I282a56f3f415f85c38e9c451cbb10bc80fc6176b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This gives us more realistic control over the number of requests we can
submit.
Change-Id: Ie717912685eaa56905c32d143c7887b636c1a9e9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rw_depth was a misinterpretation of the spec. It is based on the value
of max_qp_rd_atom which only governs the number of read and atomic
operations. However, we were using rw_depth to block both read and write
operations which is an unnecessary restriction. write operations should
only be governed by the number of Work Requests posted to the send
queue. We currently guarantee that we will never overshoot the queue
depth for Work requests since they are embedded in the requests and
limited to a size of max_queue_depth.
Change-Id: Ib945ade4ef9a63420afce5af7e4852932345a460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be necessary later on when we need to throttle send and recv
requests in software.
Change-Id: Ifb25eaabd15e101fbfc2959a08a321f80857b280
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Both initiator and target are using the minium 10 seconds
timeout value, so set it in kas field when initializing
the controller.
Change-Id: Idda68bdfe27613ebaf706a0de497145d3f9ed766
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the code does not comply with the spec,
so remove such code for 19.01 and will add the code
which complies with the spec for 19.04
Change-Id: Icd3b2573fbc46dc2fa7a00c6672c23ea01ffe0ee
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/441985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Although Vhost SCSI code is technically capable
of polling different sessions on different lcores,
the underlying SCSI API won't allow allocating
io_channels on more than one lcore.
That's why we will now let device backends assign
lcores by themselves.
The first Vhost SCSI session will now choose one
core from the available ones, and any subsequent
sessions will stick to the same one.
Change-Id: I616cd195a919960dff68508473cea236abf8d6a3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there is socket read error, we should directly disconnect
the socket instead of set the tqpair into RECV_ERROR state.
When it is in ERROR_RECV state, it does not mean that
we should close the socket immediately.
Change-Id: I975906653c13eb3fa5195799c517015435176785
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/441830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Bump the log level for EAL to RTE_LOG_NOTICE.
Reading from rte_log.h:
```
RTE_LOG_NOTICE 6U /**< Normal but significant condition. */
RTE_LOG_INFO 7U /**< Informational. */
RTE_LOG_DEBUG 8U /**< Debug-level messages. */
```
We're doing this primarily for the NVMe hotplug poller,
which calls spdk_pci_enumerate() and constantly bloats
the output with logs describing which device is currently
iterated over. We don't want to see those.
Change-Id: I1a90e514fdf467bc95da910f786f1818757cfdcf
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441789
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In patch fbec702944 (bdev/crypto: Set QAT alignment
requirement) we added an alignment requirement for I/O
buffers, but the internally-allocated buffers for
encryption haven't respected it.
We now allocate those buffers with the crypto bdev's
required alignment. It is only required for QAT and we
do it unconditionally, but we don't want to strcmp the
driver name in the hot I/O path just for that - the
code is to be refactored anyway.
Change-Id: I2cbc04408ddc5574f212b63536a05eb73ceba104
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441908
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
