To enable the timeout function.
Change-Id: Id5c40848957743683b6a5c2d085e7f777f14497d
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/444803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Use NBD_SET_SOCK to check whether the nbd device is setup
by other process or whether nbd kernel module is ready
before other nbd ioctl operations. This can avoid bad
influence to the nbd device setup by other process.
Change-Id: Ic12acbfddb8c4388e25731c39159b1ce559b8f23
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444805
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The ioctl NBD_SET_SOCK can return EBUSY on conditions not
only the kernel module hasn't loaded entirely yet, but
also the nbd device is setup by another process, which will
lead the poller's infinite polling.
This patch will wait only 1 second if device is busy.
Change-Id: I8b1cfab725cba180f774a57ced3fa4ba81da2037
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A new module switch which was missed at here.
Change-Id: If1784ace13657756d8034cd04e594af5b1799381
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is no need to lock g_ftl_bdev_lock when unregister a ftl_bdev.
Besides, the destructor of ftl_bdev will lock it again.
Change-Id: I99870483183879d9422584dbac6e154f605daea8
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/444794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added check before write submission to indicate if
LBA was update in meantime. In such case don't set band's
metadata and rwb entry cache bit. Previous implementation
invalidates such address during write completion and could
cause that inconsistent lba map was stored into disk.
Change-Id: I4353d9f96c53132ca384aeca43caef8d11f07fa4
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444403
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We assumed io_channel allocation always succeeds, but
that's not true. Doing I/O to any vhost session that
failed to allocate an io_channel would most likely
cause a crash.
We'll now detect io_channel allocation failure and
print a proper error message. The SCSI target for
which the channel allocation failed simply won't be
visible to the vhost master. All I/O to that target
will be rejected.
We should probably report the error to the upper
layer and either prevent the device from starting
or fail the SCSI target hotplug request. But for now
let's just prevent the crash.
Change-Id: I735dfb930d8905f70636a236b4fa94288d0aaf3a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvme_ctrlr_submit_admin_request() will access admin queue, and we
should hold ctrl->ctrlr_lock when access it.
Change-Id: Iff576fe5e14e854eb38dbc64d6c6d9ec1ba17056
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/444793
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also use the same style condition check for secondary process
with PCIE type.
Change-Id: I93c83126145255887914ef5efea1a493c8f7f767
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444492
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The helper function spdk_get_data_out_buffer_size() is a little
confusing because it does only returning macro constant
SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH.
The macro constant will be configurable and so the helper function
is not sustainable.
Replace the helper function simply by the macro constant.
Change-Id: I4ec300f61783da7bb712512603c2dd80987ec702
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When hotplug feature is enabled by NVMe driver, users may
call delete_nvme_controller() RPC to delete one controller,
however, the hotplug monitor will probe this controller
automaticlly and attach it back to NVMe driver. We added
a skip list, for those user deleted controllers so that
NVMe driver will not attach it again.
Fix issue #602.
Change-Id: Ibbe21ff8a021f968305271acdae86207e6228e20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Error logs in nvmf_rdma_dump_request lead to report error about
address points to the zero page, add judgement to return.
this issue occurs in heavy load fio testing.
Change-Id: I50302be88b3af53f718e3800aa16df7c506ca4e8
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
User can create a probe context to probe and attach controllers
asynchronously, the controllers will be added to the context list
for the first step, then users can poll the context until the list
becomes empty.
Change-Id: I3a96e2d8a9724332ff15542f78f9553fdab505e2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442664
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Existing NVMe driver uses a global list g_nvme_init_ctrlrs
to track the controllers during initialization, and internal
function will start each controller in the list one by one
until the list is empty. We introduce a probe context
and move the global list into the context, with the context
we can enable asynchronous probe API in the next patch, also
this can enable parallel probe feature.
Change-Id: I538537abe8c1a4a82fb168ca8055de42caa6e4f9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426304
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, function spdk_nvme_probe_internal() will probe
NVMe controllers and then bring up probed controllers
into the ready state after that. Broke up original two parts
with probe and start stage, this will help us to introduce
a probe context in the next patch.
Change-Id: Ie0c55a6a5463fb437f84349b0b2b33a217ba63e0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/426303
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
pycodestyle is the new style checker for python. We should install it as
available on all distributions.
Change-Id: I399f84a7027c0d7b8e9974fbc3be86c3c4beefae
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It iterates over the list and polls each one. However,
in practice the list still contains just one thread for
now.
Change-Id: I9bac7eb5ebf9b4edc6409caaf26747470b65e336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the inverse of spdk_thread_get_ctx.
Change-Id: I81541ff1687cfea358cb7046caf69982c38f6a38
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444455
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Schedulers can use this region to store required information.
Change-Id: I93efb44f1a534596f6285bbe014579311fe011e7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444454
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is much simpler and avoids the problems with requiring
it to run on a thread.
Change-Id: I811444c5a15d292356703beccc17e505d55d7678
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443645
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The thread scheduling mechanism is being rewritten and this
won't be used in the new system.
Change-Id: I829e8118ed0a10480bd86934b45e68fcb810931a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444453
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This typically has pollers registered anyway, so the
parameter had no effect.
Change-Id: Ica904d83c48874a618e316f3a76e25e0c67d5cf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444452
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a CLEAN_FILES macro that shared_lib/Makefile can use
to add to the list of files to be cleaned.
Fixes#663.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12982e0989e02a69aaea4e470777301280090096
Reviewed-on: https://review.gerrithub.io/c/444427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Running iSCSI in loopback runs into some cases where
a core is considerably impacted by the initiator
TCP traffic, even though the scheduler is trying
to schedule it on different cores. Gang is working
through modifying the QoS tests to just use bdevperf
instead of iSCSI, but until that is ready, let's
allow more variance to reduce the fairly significant
rate of test failures we're seeing due to this test.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99fe13621f5ca2f8e6402fc17fb859df815fe05e
Reviewed-on: https://review.gerrithub.io/c/444458
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This driver has more generic use cases than just for the crypto driver.
See github issues 594 and 210.
Change-Id: I7adcb058418a9b56ffa150366584b22b38eb8398
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
On some platforms, especially AWS, uio_pci_generic is not readily
available, and we don't have access to an IOMMU, so using the DPDK
igb_uio driver is a valid workaround.
Change-Id: Ic96776f925d9bbbcab625f5adb7642ca6bd4033d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444122
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Althrough SPDK already provides a API to users which
can process runtime timeout NVMe commands, but it's
nice to have another API here, SPDK NVMe driver can
use it to break the endless wait. Also use the API
first in the initialization process, because we don't
want to add another initialization state with Intel
only supported log pages.
Change-Id: Ibe7cadbc59033a299a1fcf02a66e98fc4eca8100
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
pycodestyle correctly detects that there isn't
two line breaks after the end of the class here.
The test pool pep8 does not catch this. We need
to move the test pool to the newer pycodestyle
tool.
Change-Id: I5fa8b66f8c3d76e41140e79fdcd264d7b38f86c7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444445
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: Iabe45ecc7dc52d45b792a1a5b1e42bb511c13a89
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443238
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Bug introduced when some fixes for DPDK 19.02 were added.
Fixes#659
Change-Id: I5ef9ce6a5e30591fc7d2aeaa8d398effe42888f6
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/444449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
If do not do that, we will continue polling. And checked
the exceptional handling of aio_check_io, it will just exit.
So we add such case, thus we shall not poll the qpair again.
This is especially useful when we use perf to test against
NVMe-oF target.
Change-Id: Ib820e0b80f80cfceb1ea5e08b359f50d9e360b30
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/444325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
From TP8000 spec 7.4.7,
"In response to a C2HTermReq PDU, the host shall terminate the connection.
If the host does not terminate the connection in an implementation specific
period that does not exceed 30 seconds, the controller may terminate the
connection on its own".
It means that the timeout is designed for: when the target is
sending out C2hTermReq, if the host does not terminate the connection,
the target should terminate the connection.
PS: For detecting the malicous connection without sending response
(such as no response of R2T PDU) which should be another patch.
Change-Id: I586dbb235d99aeab5d748a19b9128cd8b0cef183
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The current state for the setup script is that the vfio kernel driver
will be preferred against the uio_pci_generic driver only if an IOMMU is
present in the system. This is checked by looking for any IOMMU groups
in sysfs.
In case of vfio no-IOMMU driver, there are no IOMMU groups when loading
the vfio modules. The IOMMU groups are created when the PCI devices get
bound to the vfio-pci driver. Thus, even though the vfio driver is
loaded, the setup script will prefer to use the uio_pci_generic kernel
driver. This patch changes this behavior.
In order to support vfio no-IOMMU mode, the setup script will be
checking if the vfio module is loaded with parameter
"enable_unsafe_noiommu_mode". In other case, it will be falling back to
the uio_pci_generic driver.
Change-Id: I1e8317bc4e3d6af4ba8a9e0c51175c9f4190f47b
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/441062
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, SPDK does not support vfio in no-IOMMU mode. However, it
seems quite easy to extend the vtophys code to add support for this.
vfio in no-IOMMU mode does not support DMA remapping. This implies that
physical DMA addresses are used instead of IOVAs.
This patch checks whether the vfio no-IOMMU mode is enabled using
function rte_vfio_noiommu_is_enabled() from the DPDK RTE vfio interface.
In this case, physical addresses are used for the DMA mappings. This is
the same code path for the DMA translations as when the uio is used as a
kernel driver.
Change-Id: I6fb3c849a345c6f2f2b4141dddb8c17be2581495
Signed-off-by: Nikos Dragazis <ndragazis@arrikto.com>
Reviewed-on: https://review.gerrithub.io/c/441061
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvmf was just setting it to 0 (which is the default).
The reactor test was setting it to 1000, which wasn't
actually used since there are always pollers registered.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I673d859584c404d9b2746fbc8cd4f00fa38df5e5
Reviewed-on: https://review.gerrithub.io/c/444307
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test doesn't really need to use this - in general
we want to test max event throughput with no delays
interjected.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If4aaf90ce815687a5ca725a89dfab5e057f9a5c4
Reviewed-on: https://review.gerrithub.io/c/444306
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are doing away with using the stub application as
much as possible, so let's just remove references to it
where we can.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I52802474f1aaaf100c1b929f4e3ac555532a8410
Reviewed-on: https://review.gerrithub.io/c/444305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
